diff mbox series

[RFC,v4,1/5] dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller

Message ID 20220317012404.8069-2-prabhakar.mahadev-lad.rj@bp.renesas.com
State Superseded
Headers show
Series Renesas RZ/G2L IRQC support | expand

Commit Message

Prabhakar Mahadev Lad March 17, 2022, 1:24 a.m. UTC
Add DT bindings for the Renesas RZ/G2L Interrupt Controller.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 .../renesas,rzg2l-irqc.yaml                   | 131 ++++++++++++++++++
 1 file changed, 131 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml

Comments

Lad, Prabhakar March 17, 2022, 11:55 a.m. UTC | #1
Hi Krzysztof,

Thank you for the review.

On Thu, Mar 17, 2022 at 9:44 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 17/03/2022 02:24, Lad Prabhakar wrote:
> > Add DT bindings for the Renesas RZ/G2L Interrupt Controller.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> >  .../renesas,rzg2l-irqc.yaml                   | 131 ++++++++++++++++++
> >  1 file changed, 131 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > new file mode 100644
> > index 000000000000..a14492ec9235
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> > @@ -0,0 +1,131 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +  - Geert Uytterhoeven <geert+renesas@glider.be>
> > +
> > +description: |
> > +  IA55 performs various interrupt controls including synchronization for the external
> > +  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
> > +  interrupts output by each IP. And it notifies the interrupt to the GIC
> > +    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
> > +    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
> > +    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
> > +      stand-up edge detection interrupts)
> > +
> > +allOf:
> > +  - $ref: /schemas/interrupt-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - renesas,r9a07g044-irqc    # RZ/G2L
> > +      - const: renesas,rzg2l-irqc
> > +
> > +  '#interrupt-cells':
> > +    const: 2
> > +
> > +  '#address-cells':
> > +    const: 0
> > +
> > +  interrupt-controller: true
> > +
> > +  reg:
> > +    maxItems: 1> +
> > +  interrupts:
> > +    maxItems: 41
> > +
> > +  clocks:
> > +    maxItems: 2
> > +
> > +  clock-names:
> > +    items:
> > +      - const: clk
> > +      - const: pclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - '#interrupt-cells'
> > +  - '#address-cells'
> > +  - interrupt-controller
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +
> > +additionalProperties: false
>
> This should be rather unevaluatedProperties and remove
> interrupt-controller:true from properties.
>
Ok will do.

> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +
> > +    irqc: interrupt-controller@110a0000 {
> > +            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
> > +            #interrupt-cells = <2>;
> > +            #address-cells = <0>;
> > +            interrupt-controller;
> > +            reg = <0x110a0000 0x10000>;
>
> Put the reg after compatible in DTS code. The ordering of properties in
> bindings is a bit odd, but I wasn't following order by myself, so cannot
> complain. :)
>
Ok will fix that in next version.

Cheers,
Prabhakar
Krzysztof Kozlowski March 17, 2022, 1:34 p.m. UTC | #2
On 17/03/2022 12:55, Lad, Prabhakar wrote:
> Hi Krzysztof,
> 
> Thank you for the review.
> 
> On Thu, Mar 17, 2022 at 9:44 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>>
>> On 17/03/2022 02:24, Lad Prabhakar wrote:
>>> Add DT bindings for the Renesas RZ/G2L Interrupt Controller.
>>>
>>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>>> ---
>>>  .../renesas,rzg2l-irqc.yaml                   | 131 ++++++++++++++++++
>>>  1 file changed, 131 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
>>> new file mode 100644
>>> index 000000000000..a14492ec9235
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
>>> @@ -0,0 +1,131 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
>>> +
>>> +maintainers:
>>> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>>> +  - Geert Uytterhoeven <geert+renesas@glider.be>
>>> +
>>> +description: |
>>> +  IA55 performs various interrupt controls including synchronization for the external
>>> +  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
>>> +  interrupts output by each IP. And it notifies the interrupt to the GIC
>>> +    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
>>> +    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
>>> +    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
>>> +      stand-up edge detection interrupts)
>>> +
>>> +allOf:
>>> +  - $ref: /schemas/interrupt-controller.yaml#
>>> +
>>> +properties:
>>> +  compatible:
>>> +    items:
>>> +      - enum:
>>> +          - renesas,r9a07g044-irqc    # RZ/G2L
>>> +      - const: renesas,rzg2l-irqc
>>> +
>>> +  '#interrupt-cells':
>>> +    const: 2
>>> +
>>> +  '#address-cells':
>>> +    const: 0
>>> +
>>> +  interrupt-controller: true
>>> +
>>> +  reg:
>>> +    maxItems: 1> +
>>> +  interrupts:
>>> +    maxItems: 41
>>> +
>>> +  clocks:
>>> +    maxItems: 2
>>> +
>>> +  clock-names:
>>> +    items:
>>> +      - const: clk
>>> +      - const: pclk
>>> +
>>> +  power-domains:
>>> +    maxItems: 1
>>> +
>>> +  resets:
>>> +    maxItems: 1
>>> +
>>> +required:
>>> +  - compatible
>>> +  - '#interrupt-cells'
>>> +  - '#address-cells'
>>> +  - interrupt-controller
>>> +  - reg
>>> +  - interrupts
>>> +  - clocks
>>> +  - clock-names
>>> +  - power-domains
>>> +  - resets
>>> +
>>> +additionalProperties: false
>>
>> This should be rather unevaluatedProperties and remove
>> interrupt-controller:true from properties.
>>
> Ok will do.

After some tests it seems interrupt-controller:true is required in
properties, so only change unevaluatedProperties.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 000000000000..a14492ec9235
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,131 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-irqc    # RZ/G2L
+      - const: renesas,rzg2l-irqc
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 41
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0x110a0000 0x10000>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                     <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+            clock-names = "clk", "pclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_IA55_RESETN>;
+    };