| Message ID | 20211227145905.2905-1-zajec5@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [V3,1/2] dt-bindings: leds: add Broadcom's BCM63138 controller | expand |
On 27.12.2021 15:59, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs: > 1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838) > 2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360) > > The newer one was also later also used on BCM4908 SoC. > > Old block is already documented in the leds-bcm6328.yaml. This binding > documents the new one which uses different registers & programming. It's > first used in BCM63138 thus the binding name. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > Reviewed-by: Rob Herring <robh@kernel.org> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Ping? Pavel: can I get this patchset finally accepted, please?
Hi Pavel, On 7.03.2022 07:27, Rafał Miłecki wrote: > On 27.12.2021 15:59, Rafał Miłecki wrote: >> From: Rafał Miłecki <rafal@milecki.pl> >> >> Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs: >> 1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838) >> 2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360) >> >> The newer one was also later also used on BCM4908 SoC. >> >> Old block is already documented in the leds-bcm6328.yaml. This binding >> documents the new one which uses different registers & programming. It's >> first used in BCM63138 thus the binding name. >> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >> Reviewed-by: Rob Herring <robh@kernel.org> >> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > Pavel: can I get this patchset finally accepted, please? It has been 3 months now. I kindly pinged you in January, February and March. Please let me know how can I get those patches accepted.
Hi Pavel, On 27.03.2022 11:28, Rafał Miłecki wrote: > On 7.03.2022 07:27, Rafał Miłecki wrote: >> On 27.12.2021 15:59, Rafał Miłecki wrote: >>> From: Rafał Miłecki <rafal@milecki.pl> >>> >>> Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs: >>> 1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838) >>> 2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360) >>> >>> The newer one was also later also used on BCM4908 SoC. >>> >>> Old block is already documented in the leds-bcm6328.yaml. This binding >>> documents the new one which uses different registers & programming. It's >>> first used in BCM63138 thus the binding name. >>> >>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >>> Reviewed-by: Rob Herring <robh@kernel.org> >>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> >> >> Pavel: can I get this patchset finally accepted, please? > > It has been 3 months now. I kindly pinged you in January, February and > March. Please let me know how can I get those patches accepted. did you maybe have a chance to look at my patches?
Hi! > Old block is already documented in the leds-bcm6328.yaml. This binding > documents the new one which uses different registers & programming. It's > first used in BCM63138 thus the binding name. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > + properties: > + reg: > + maxItems: 1 > + description: LED pin number > + > + active-low: > + type: boolean > + description: Makes LED active low. I'd expect both descriptions to end with ".", or none of them. Best regards, Pavel
Hi! > From: Rafał Miłecki <rafal@milecki.pl> > > Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs: > 1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838) > 2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360) > > The newer one was also later also used on BCM4908 SoC. > > Old block is already documented in the leds-bcm6328.yaml. This binding > documents the new one which uses different registers & programming. It's > first used in BCM63138 thus the binding name. Thanks, applied, sorry for the delay. I would not mind additional fixes as mentioned. Pavel
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml new file mode 100644 index 000000000000..99cd4ba9b0ca --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom's BCM63138 LEDs controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: | + This LEDs controller was first used on BCM63138 and later reused on BCM4908, + BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs. + + It supports up to 32 LEDs that can be connected parallelly or serially. It + also includes limited support for hardware blinking. + + Binding serially connected LEDs isn't documented yet. + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm4908-leds + - brcm,bcm6848-leds + - brcm,bcm6858-leds + - brcm,bcm63148-leds + - brcm,bcm63381-leds + - brcm,bcm68360-leds + - const: brcm,bcm63138-leds + - const: brcm,bcm63138-leds + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[a-f0-9]+$": + type: object + + $ref: common.yaml# + + properties: + reg: + maxItems: 1 + description: LED pin number + + active-low: + type: boolean + description: Makes LED active low. + + required: + - reg + + unevaluatedProperties: false + +required: + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + leds@ff800800 { + compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; + reg = <0xff800800 0xdc>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0x0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + }; + + led@3 { + reg = <0x3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + active-low; + }; + };