diff mbox series

[v3] ASoC: codecs: wsa881x: add runtime pm support

Message ID 20220225180716.13462-1-srinivas.kandagatla@linaro.org
State Superseded
Headers show
Series [v3] ASoC: codecs: wsa881x: add runtime pm support | expand

Commit Message

Srinivas Kandagatla Feb. 25, 2022, 6:07 p.m. UTC
WSA SoundWire Controller does not support Clock stop and performs a soft reset
on suspend  resume path. Its recommended that WSA881x codecs connected to this
are also reset using a hard reset during suspend resume.

So this codec driver performs a hard reset during suspend resume cycle.
---
Hi Mark, 
Looks like the runtime pm series was partly applied, so am sending just this
leftover patch with requested changes.

Changes since v2:
  removed setting up simple_clk_stop_capable flag
  update log

srini


 sound/soc/codecs/wsa881x.c | 53 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

Comments

Mark Brown Feb. 28, 2022, 1:33 p.m. UTC | #1
On Fri, Feb 25, 2022 at 06:07:16PM +0000, Srinivas Kandagatla wrote:
> WSA SoundWire Controller does not support Clock stop and performs a soft reset
> on suspend  resume path. Its recommended that WSA881x codecs connected to this
> are also reset using a hard reset during suspend resume.
> 
> So this codec driver performs a hard reset during suspend resume cycle.
> ---

You've not provided a Signed-off-by for this so I can't do anything with
it, please see Documentation/process/submitting-patches.rst for details
on what this is and why it's important.
Srinivas Kandagatla Feb. 28, 2022, 2:21 p.m. UTC | #2
On 28/02/2022 13:33, Mark Brown wrote:
> On Fri, Feb 25, 2022 at 06:07:16PM +0000, Srinivas Kandagatla wrote:
>> WSA SoundWire Controller does not support Clock stop and performs a soft reset
>> on suspend  resume path. Its recommended that WSA881x codecs connected to this
>> are also reset using a hard reset during suspend resume.
>>
>> So this codec driver performs a hard reset during suspend resume cycle.
>> ---
> 
> You've not provided a Signed-off-by for this so I can't do anything with
> it, please see Documentation/process/submitting-patches.rst for details
> on what this is and why it's important.
Hm..
Am not sure why was this missing in first place.. Let me resend a new 
version with proper sign off.

--srini
Mark Brown Feb. 28, 2022, 10:23 p.m. UTC | #3
On Fri, 25 Feb 2022 18:07:16 +0000, Srinivas Kandagatla wrote:
> WSA SoundWire Controller does not support Clock stop and performs a soft reset
> on suspend  resume path. Its recommended that WSA881x codecs connected to this
> are also reset using a hard reset during suspend resume.
> 
> So this codec driver performs a hard reset during suspend resume cycle.
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: codecs: wsa881x: add runtime pm support
      commit: 8dd55245836119ee3636543b6c2597efd78e643d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index 0222370ff95d..616b26c70c3b 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -11,6 +11,7 @@ 
 #include <linux/of_gpio.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_registers.h>
 #include <linux/soundwire/sdw_type.h>
@@ -198,6 +199,7 @@ 
 #define WSA881X_OCP_CTL_TIMER_SEC 2
 #define WSA881X_OCP_CTL_TEMP_CELSIUS 25
 #define WSA881X_OCP_CTL_POLL_TIMER_SEC 60
+#define WSA881X_PROBE_TIMEOUT 1000
 
 #define WSA881X_PA_GAIN_TLV(xname, reg, shift, max, invert, tlv_array) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
@@ -747,6 +749,12 @@  static int wsa881x_put_pa_gain(struct snd_kcontrol *kc,
 	unsigned int mask = (1 << fls(max)) - 1;
 	int val, ret, min_gain, max_gain;
 
+	ret = pm_runtime_get_sync(comp->dev);
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_noidle(comp->dev);
+		return ret;
+	}
+
 	max_gain = (max - ucontrol->value.integer.value[0]) & mask;
 	/*
 	 * Gain has to set incrementally in 4 steps
@@ -773,6 +781,9 @@  static int wsa881x_put_pa_gain(struct snd_kcontrol *kc,
 		usleep_range(1000, 1010);
 	}
 
+	pm_runtime_mark_last_busy(comp->dev);
+	pm_runtime_put_autosuspend(comp->dev);
+
 	return 1;
 }
 
@@ -1101,6 +1112,7 @@  static int wsa881x_probe(struct sdw_slave *pdev,
 			 const struct sdw_device_id *id)
 {
 	struct wsa881x_priv *wsa881x;
+	struct device *dev = &pdev->dev;
 
 	wsa881x = devm_kzalloc(&pdev->dev, sizeof(*wsa881x), GFP_KERNEL);
 	if (!wsa881x)
@@ -1132,12 +1144,52 @@  static int wsa881x_probe(struct sdw_slave *pdev,
 		return PTR_ERR(wsa881x->regmap);
 	}
 
+	pm_runtime_set_autosuspend_delay(dev, 3000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	return devm_snd_soc_register_component(&pdev->dev,
 					       &wsa881x_component_drv,
 					       wsa881x_dais,
 					       ARRAY_SIZE(wsa881x_dais));
 }
 
+static int __maybe_unused wsa881x_runtime_suspend(struct device *dev)
+{
+	struct regmap *regmap = dev_get_regmap(dev, NULL);
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dev);
+
+	gpiod_direction_output(wsa881x->sd_n, 0);
+
+	regcache_cache_only(regmap, true);
+	regcache_mark_dirty(regmap);
+
+	return 0;
+}
+
+static int __maybe_unused wsa881x_runtime_resume(struct device *dev)
+{
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	struct regmap *regmap = dev_get_regmap(dev, NULL);
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dev);
+
+	gpiod_direction_output(wsa881x->sd_n, 1);
+
+	wait_for_completion_timeout(&slave->initialization_complete,
+				    msecs_to_jiffies(WSA881X_PROBE_TIMEOUT));
+
+	regcache_cache_only(regmap, false);
+	regcache_sync(regmap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops wsa881x_pm_ops = {
+	SET_RUNTIME_PM_OPS(wsa881x_runtime_suspend, wsa881x_runtime_resume, NULL)
+};
+
 static const struct sdw_device_id wsa881x_slave_id[] = {
 	SDW_SLAVE_ENTRY(0x0217, 0x2010, 0),
 	SDW_SLAVE_ENTRY(0x0217, 0x2110, 0),
@@ -1151,6 +1203,7 @@  static struct sdw_driver wsa881x_codec_driver = {
 	.id_table = wsa881x_slave_id,
 	.driver = {
 		.name	= "wsa881x-codec",
+		.pm = &wsa881x_pm_ops,
 	}
 };
 module_sdw_driver(wsa881x_codec_driver);