Message ID | 20220210103423.271016-8-vkoul@kernel.org |
---|---|
State | Superseded |
Headers | show |
Series | drm/msm: Add Display Stream Compression Support | expand |
On 2/10/2022 2:34 AM, Vinod Koul wrote: > We need to configure the encoder for DSC configuration and calculate DSC > parameters for the given timing so this patch adds that support by > adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> Minor nit below, with that Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 164 +++++++++++++++++- > .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 8 + > 2 files changed, 171 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index 1e648db439f9..95a7bf362e81 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -21,6 +21,7 @@ > #include "dpu_hw_intf.h" > #include "dpu_hw_ctl.h" > #include "dpu_hw_dspp.h" > +#include "dpu_hw_dsc.h" > #include "dpu_formats.h" > #include "dpu_encoder_phys.h" > #include "dpu_crtc.h" > @@ -136,6 +137,8 @@ enum dpu_enc_rc_states { > * @cur_slave: As above but for the slave encoder. > * @hw_pp: Handle to the pingpong blocks used for the display. No. > * pingpong blocks can be different than num_phys_encs. > + * @hw_dsc: Handle to the DSC blocks used for the display. > + * @dsc_mask: The bitmask of used DSC blocks. > * @intfs_swapped: Whether or not the phys_enc interfaces have been swapped > * for partial update right-only cases, such as pingpong > * split where virtual pingpong does not generate IRQs > @@ -169,6 +172,7 @@ enum dpu_enc_rc_states { > * @topology: topology of the display > * @idle_timeout: idle timeout duration in milliseconds > * @dp: msm_dp pointer, for DP encoders > + * @dsc: msm_display_dsc_config pointer, for DSC-enabled encoders > */ > struct dpu_encoder_virt { > struct drm_encoder base; > @@ -182,6 +186,9 @@ struct dpu_encoder_virt { > struct dpu_encoder_phys *cur_master; > struct dpu_encoder_phys *cur_slave; > struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + > + unsigned int dsc_mask; > > bool intfs_swapped; > > @@ -209,6 +216,9 @@ struct dpu_encoder_virt { > u32 idle_timeout; > > struct msm_dp *dp; > + > + /* DSC configuration */ > + struct msm_display_dsc_config *dsc; > }; > > #define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base) > @@ -972,7 +982,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL }; > - int num_lm, num_ctl, num_pp; > + struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC]; > + int num_lm, num_ctl, num_pp, num_dsc; > int i, j; > > if (!drm_enc) { > @@ -1027,6 +1038,23 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i]) > : NULL; > > + dpu_enc->dsc_mask = 0; > + > + if (dpu_enc->dsc) { > + unsigned int dsc_mask = 0; > + > + num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, > + drm_enc->base.id, DPU_HW_BLK_DSC, > + hw_dsc, ARRAY_SIZE(hw_dsc)); > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL; > + > + for (i = 0; i < num_dsc; i++) > + dsc_mask |= BIT(dpu_enc->hw_dsc[i]->idx - DSC_0); > + > + dpu_enc->dsc_mask = dsc_mask; > + } > + > cstate = to_dpu_crtc_state(drm_crtc->state); > > for (i = 0; i < num_lm; i++) { > @@ -1739,6 +1767,127 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work) > nsecs_to_jiffies(ktime_to_ns(wakeup_time))); > } > > +static void > +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width) > +{ > + int slice_count, slice_per_intf; > + int bytes_in_slice, total_bytes_per_intf; > + > + if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) { > + DPU_ERROR("Invalid DSC/slices\n"); > + return; > + } > + > + slice_count = dsc->drm->slice_count; > + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); > + > + /* > + * If slice_count is greater than slice_per_intf then default to 1. > + * This can happen during partial update. > + */ > + if (slice_count > slice_per_intf) > + slice_count = 1; > + > + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * > + dsc->drm->bits_per_pixel, 8); > + total_bytes_per_intf = bytes_in_slice * slice_per_intf; > + > + dsc->eol_byte_num = total_bytes_per_intf % 3; > + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); > + dsc->bytes_in_slice = bytes_in_slice; > + dsc->bytes_per_pkt = bytes_in_slice * slice_count; > + dsc->pkt_per_line = slice_per_intf / slice_count; > +} > + > +static void > +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc, > + u32 enc_ip_width) > +{ > + int ssm_delay, total_pixels, soft_slice_per_enc; > + > + soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width; > + > + /* > + * minimum number of initial line pixels is a sum of: > + * 1. sub-stream multiplexer delay (83 groups for 8bpc, > + * 91 for 10 bpc) * 3 > + * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 > + * 3. the initial xmit delay > + * 4. total pipeline delay through the "lock step" of encoder (47) > + * 5. 6 additional pixels as the output of the rate buffer is > + * 48 bits wide > + */ > + ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92); > + total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47; > + if (soft_slice_per_enc > 1) > + total_pixels += (ssm_delay * 3); > + dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width); > +} > + > +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc, > + struct dpu_hw_pingpong *hw_pp, > + struct msm_display_dsc_config *dsc, > + u32 common_mode) > +{ > + if (hw_dsc->ops.dsc_config) > + hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode); > + > + if (hw_dsc->ops.dsc_config_thresh) > + hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); > + > + if (hw_pp->ops.setup_dsc) > + hw_pp->ops.setup_dsc(hw_pp); > + > + if (hw_pp->ops.enable_dsc) > + hw_pp->ops.enable_dsc(hw_pp); > +} > + > +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc, > + struct msm_display_dsc_config *dsc) > +{ > + /* coding only for 2LM, 2enc, 1 dsc config */ > + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + int this_frame_slices; > + int intf_ip_w, enc_ip_w; > + int dsc_common_mode; > + int pic_width; > + int i; > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { > + hw_pp[i] = dpu_enc->hw_pp[i]; > + hw_dsc[i] = dpu_enc->hw_dsc[i]; > + > + if (!hw_pp[i] || !hw_dsc[i]) { > + DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n"); > + return; > + } > + } > + > + dsc_common_mode = 0; > + pic_width = dsc->drm->pic_width; > + > + dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL; > + if (enc_master->intf_mode == INTF_MODE_VIDEO) > + dsc_common_mode |= DSC_MODE_VIDEO; > + > + this_frame_slices = pic_width / dsc->drm->slice_width; > + intf_ip_w = this_frame_slices * dsc->drm->slice_width; > + > + dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); > + > + /* > + * dsc merge case: when using 2 encoders for the same stream, > + * no. of slices need to be same on both the encoders. > + */ > + enc_ip_w = intf_ip_w / 2; > + dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w); > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode); > +} > + > void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > { > struct dpu_encoder_virt *dpu_enc; > @@ -1770,6 +1919,9 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]); > } > } > + > + if (dpu_enc->dsc) > + dpu_encoder_prep_dsc(dpu_enc, dpu_enc->dsc); > } > > void dpu_encoder_kickoff(struct drm_encoder *drm_enc) > @@ -2015,6 +2167,8 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, > dpu_enc->idle_pc_supported = > dpu_kms->catalog->caps->has_idle_pc; > > + dpu_enc->dsc = disp_info->dsc; > + > mutex_lock(&dpu_enc->enc_lock); > for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { > /* > @@ -2244,3 +2398,11 @@ enum dpu_intf_mode dpu_encoder_get_intf_mode(struct drm_encoder *encoder) > > return INTF_MODE_NONE; > } > + > +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc) > +{ > + struct drm_encoder *encoder = phys_enc->parent; > + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(encoder); > + > + return dpu_enc->dsc_mask; > +} > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > index e7270eb6b84b..7b90d644a41b 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > @@ -332,6 +332,14 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( > return BLEND_3D_NONE; > } > > +/** > + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder > + * This helper function is used by physical encoder to get DSC blocks mask > + * used for this encoder. This looks slightly misaligned to me or not sure if its my mail client. Please check it once. > + * @phys_enc: Pointer to physical encoder structure > + */ > +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); > + > /** > * dpu_encoder_helper_split_config - split display configuration helper function > * This helper function may be used by physical encoders to configure
On 16-02-22, 11:54, Abhinav Kumar wrote: > > +/** > > + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder > > + * This helper function is used by physical encoder to get DSC blocks mask > > + * used for this encoder. > > This looks slightly misaligned to me or not sure if its my mail client. > Please check it once. This looks fine in code as well as in mutt for me.. Maybe client issue
On 2022-02-10 16:04:17, Vinod Koul wrote: > We need to configure the encoder for DSC configuration and calculate DSC > parameters for the given timing so this patch adds that support by > adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 164 +++++++++++++++++- > .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 8 + > 2 files changed, 171 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index 1e648db439f9..95a7bf362e81 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -21,6 +21,7 @@ > #include "dpu_hw_intf.h" > #include "dpu_hw_ctl.h" > #include "dpu_hw_dspp.h" > +#include "dpu_hw_dsc.h" > #include "dpu_formats.h" > #include "dpu_encoder_phys.h" > #include "dpu_crtc.h" > @@ -136,6 +137,8 @@ enum dpu_enc_rc_states { > * @cur_slave: As above but for the slave encoder. > * @hw_pp: Handle to the pingpong blocks used for the display. No. > * pingpong blocks can be different than num_phys_encs. > + * @hw_dsc: Handle to the DSC blocks used for the display. > + * @dsc_mask: The bitmask of used DSC blocks. No need for "^The" prefix here. > * @intfs_swapped: Whether or not the phys_enc interfaces have been swapped > * for partial update right-only cases, such as pingpong > * split where virtual pingpong does not generate IRQs > @@ -169,6 +172,7 @@ enum dpu_enc_rc_states { > * @topology: topology of the display > * @idle_timeout: idle timeout duration in milliseconds > * @dp: msm_dp pointer, for DP encoders > + * @dsc: msm_display_dsc_config pointer, for DSC-enabled encoders > */ > struct dpu_encoder_virt { > struct drm_encoder base; > @@ -182,6 +186,9 @@ struct dpu_encoder_virt { > struct dpu_encoder_phys *cur_master; > struct dpu_encoder_phys *cur_slave; > struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + > + unsigned int dsc_mask; > > bool intfs_swapped; > > @@ -209,6 +216,9 @@ struct dpu_encoder_virt { > u32 idle_timeout; > > struct msm_dp *dp; > + > + /* DSC configuration */ > + struct msm_display_dsc_config *dsc; > }; > > #define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base) > @@ -972,7 +982,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL }; > - int num_lm, num_ctl, num_pp; > + struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC]; > + int num_lm, num_ctl, num_pp, num_dsc; > int i, j; > > if (!drm_enc) { > @@ -1027,6 +1038,23 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i]) > : NULL; > > + dpu_enc->dsc_mask = 0; > + > + if (dpu_enc->dsc) { > + unsigned int dsc_mask = 0; Perhaps move this definition outside the if, and unconditionally perform: dpu_enc->dsc_mask = dsc_mask; Below the if, instead of having to write it twice when ->dsc is truthy? > + > + num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, > + drm_enc->base.id, DPU_HW_BLK_DSC, > + hw_dsc, ARRAY_SIZE(hw_dsc)); > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL; > + > + for (i = 0; i < num_dsc; i++) > + dsc_mask |= BIT(dpu_enc->hw_dsc[i]->idx - DSC_0); Perhaps you can merge these loops? Assuming hw_dsc is already NULL-initialized, you only need to iterate to `i<num_dsc` once without extra conditional anyway? > + > + dpu_enc->dsc_mask = dsc_mask; > + } > + > cstate = to_dpu_crtc_state(drm_crtc->state); > > for (i = 0; i < num_lm; i++) { > @@ -1739,6 +1767,127 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work) > nsecs_to_jiffies(ktime_to_ns(wakeup_time))); > } > > +static void > +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width) > +{ > + int slice_count, slice_per_intf; > + int bytes_in_slice, total_bytes_per_intf; > + > + if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) { > + DPU_ERROR("Invalid DSC/slices\n"); What's the forward slash for? > + return; > + } > + > + slice_count = dsc->drm->slice_count; > + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); > + > + /* > + * If slice_count is greater than slice_per_intf then default to 1. > + * This can happen during partial update. > + */ > + if (slice_count > slice_per_intf) > + slice_count = 1; > + > + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * > + dsc->drm->bits_per_pixel, 8); > + total_bytes_per_intf = bytes_in_slice * slice_per_intf; > + > + dsc->eol_byte_num = total_bytes_per_intf % 3; > + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); > + dsc->bytes_in_slice = bytes_in_slice; > + dsc->bytes_per_pkt = bytes_in_slice * slice_count; > + dsc->pkt_per_line = slice_per_intf / slice_count; > +} I've seen the same calculations duplicated twice in dsi code. Since the msm_display_dsc_config struct is available in a header, perhaps a single - easily reviewable and maintainable - calculation function should be available there too? - Marijn > + > +static void > +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc, > + u32 enc_ip_width) > +{ > + int ssm_delay, total_pixels, soft_slice_per_enc; > + > + soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width; > + > + /* > + * minimum number of initial line pixels is a sum of: > + * 1. sub-stream multiplexer delay (83 groups for 8bpc, > + * 91 for 10 bpc) * 3 > + * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 > + * 3. the initial xmit delay > + * 4. total pipeline delay through the "lock step" of encoder (47) > + * 5. 6 additional pixels as the output of the rate buffer is > + * 48 bits wide > + */ > + ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92); > + total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47; > + if (soft_slice_per_enc > 1) > + total_pixels += (ssm_delay * 3); > + dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width); > +} > + > +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc, > + struct dpu_hw_pingpong *hw_pp, > + struct msm_display_dsc_config *dsc, > + u32 common_mode) > +{ > + if (hw_dsc->ops.dsc_config) > + hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode); > + > + if (hw_dsc->ops.dsc_config_thresh) > + hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); > + > + if (hw_pp->ops.setup_dsc) > + hw_pp->ops.setup_dsc(hw_pp); > + > + if (hw_pp->ops.enable_dsc) > + hw_pp->ops.enable_dsc(hw_pp); > +} > + > +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc, > + struct msm_display_dsc_config *dsc) > +{ > + /* coding only for 2LM, 2enc, 1 dsc config */ > + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + int this_frame_slices; > + int intf_ip_w, enc_ip_w; > + int dsc_common_mode; > + int pic_width; > + int i; > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { > + hw_pp[i] = dpu_enc->hw_pp[i]; > + hw_dsc[i] = dpu_enc->hw_dsc[i]; > + > + if (!hw_pp[i] || !hw_dsc[i]) { > + DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n"); > + return; > + } > + } > + > + dsc_common_mode = 0; > + pic_width = dsc->drm->pic_width; > + > + dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL; > + if (enc_master->intf_mode == INTF_MODE_VIDEO) > + dsc_common_mode |= DSC_MODE_VIDEO; > + > + this_frame_slices = pic_width / dsc->drm->slice_width; > + intf_ip_w = this_frame_slices * dsc->drm->slice_width; > + > + dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); > + > + /* > + * dsc merge case: when using 2 encoders for the same stream, > + * no. of slices need to be same on both the encoders. > + */ > + enc_ip_w = intf_ip_w / 2; > + dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w); > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode); > +} > + > void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > { > struct dpu_encoder_virt *dpu_enc; > @@ -1770,6 +1919,9 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]); > } > } > + > + if (dpu_enc->dsc) > + dpu_encoder_prep_dsc(dpu_enc, dpu_enc->dsc); > } > > void dpu_encoder_kickoff(struct drm_encoder *drm_enc) > @@ -2015,6 +2167,8 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, > dpu_enc->idle_pc_supported = > dpu_kms->catalog->caps->has_idle_pc; > > + dpu_enc->dsc = disp_info->dsc; > + > mutex_lock(&dpu_enc->enc_lock); > for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { > /* > @@ -2244,3 +2398,11 @@ enum dpu_intf_mode dpu_encoder_get_intf_mode(struct drm_encoder *encoder) > > return INTF_MODE_NONE; > } > + > +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc) > +{ > + struct drm_encoder *encoder = phys_enc->parent; > + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(encoder); > + > + return dpu_enc->dsc_mask; > +} > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > index e7270eb6b84b..7b90d644a41b 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > @@ -332,6 +332,14 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( > return BLEND_3D_NONE; > } > > +/** > + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder > + * This helper function is used by physical encoder to get DSC blocks mask > + * used for this encoder. > + * @phys_enc: Pointer to physical encoder structure > + */ > +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); > + > /** > * dpu_encoder_helper_split_config - split display configuration helper function > * This helper function may be used by physical encoders to configure > -- > 2.31.1 >
On 10/02/2022 13:34, Vinod Koul wrote: > We need to configure the encoder for DSC configuration and calculate DSC > parameters for the given timing so this patch adds that support by > adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 164 +++++++++++++++++- > .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 8 + > 2 files changed, 171 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > index 1e648db439f9..95a7bf362e81 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c > @@ -21,6 +21,7 @@ > #include "dpu_hw_intf.h" > #include "dpu_hw_ctl.h" > #include "dpu_hw_dspp.h" > +#include "dpu_hw_dsc.h" > #include "dpu_formats.h" > #include "dpu_encoder_phys.h" > #include "dpu_crtc.h" > @@ -136,6 +137,8 @@ enum dpu_enc_rc_states { > * @cur_slave: As above but for the slave encoder. > * @hw_pp: Handle to the pingpong blocks used for the display. No. > * pingpong blocks can be different than num_phys_encs. > + * @hw_dsc: Handle to the DSC blocks used for the display. > + * @dsc_mask: The bitmask of used DSC blocks. > * @intfs_swapped: Whether or not the phys_enc interfaces have been swapped > * for partial update right-only cases, such as pingpong > * split where virtual pingpong does not generate IRQs > @@ -169,6 +172,7 @@ enum dpu_enc_rc_states { > * @topology: topology of the display > * @idle_timeout: idle timeout duration in milliseconds > * @dp: msm_dp pointer, for DP encoders > + * @dsc: msm_display_dsc_config pointer, for DSC-enabled encoders > */ > struct dpu_encoder_virt { > struct drm_encoder base; > @@ -182,6 +186,9 @@ struct dpu_encoder_virt { > struct dpu_encoder_phys *cur_master; > struct dpu_encoder_phys *cur_slave; > struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + > + unsigned int dsc_mask; > > bool intfs_swapped; > > @@ -209,6 +216,9 @@ struct dpu_encoder_virt { > u32 idle_timeout; > > struct msm_dp *dp; > + > + /* DSC configuration */ > + struct msm_display_dsc_config *dsc; > }; > > #define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base) > @@ -972,7 +982,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC]; > struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL }; > - int num_lm, num_ctl, num_pp; > + struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC]; > + int num_lm, num_ctl, num_pp, num_dsc; > int i, j; > > if (!drm_enc) { > @@ -1027,6 +1038,23 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, > dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i]) > : NULL; > > + dpu_enc->dsc_mask = 0; > + > + if (dpu_enc->dsc) { > + unsigned int dsc_mask = 0; > + > + num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, > + drm_enc->base.id, DPU_HW_BLK_DSC, > + hw_dsc, ARRAY_SIZE(hw_dsc)); > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL; > + > + for (i = 0; i < num_dsc; i++) > + dsc_mask |= BIT(dpu_enc->hw_dsc[i]->idx - DSC_0); > + > + dpu_enc->dsc_mask = dsc_mask; > + } > + > cstate = to_dpu_crtc_state(drm_crtc->state); > > for (i = 0; i < num_lm; i++) { > @@ -1739,6 +1767,127 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work) > nsecs_to_jiffies(ktime_to_ns(wakeup_time))); > } > > +static void > +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width) > +{ > + int slice_count, slice_per_intf; > + int bytes_in_slice, total_bytes_per_intf; > + > + if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) { > + DPU_ERROR("Invalid DSC/slices\n"); > + return; > + } > + > + slice_count = dsc->drm->slice_count; > + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); > + > + /* > + * If slice_count is greater than slice_per_intf then default to 1. > + * This can happen during partial update. > + */ > + if (slice_count > slice_per_intf) > + slice_count = 1; > + > + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * > + dsc->drm->bits_per_pixel, 8); > + total_bytes_per_intf = bytes_in_slice * slice_per_intf; > + > + dsc->eol_byte_num = total_bytes_per_intf % 3; > + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); > + dsc->bytes_in_slice = bytes_in_slice; > + dsc->bytes_per_pkt = bytes_in_slice * slice_count; > + dsc->pkt_per_line = slice_per_intf / slice_count; I think these params are calculated again in dsi_timing_setup(), so we can drop this function completely. > +} > + > +static void > +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc, > + u32 enc_ip_width) > +{ > + int ssm_delay, total_pixels, soft_slice_per_enc; > + > + soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width; > + > + /* > + * minimum number of initial line pixels is a sum of: > + * 1. sub-stream multiplexer delay (83 groups for 8bpc, > + * 91 for 10 bpc) * 3 > + * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 > + * 3. the initial xmit delay > + * 4. total pipeline delay through the "lock step" of encoder (47) > + * 5. 6 additional pixels as the output of the rate buffer is > + * 48 bits wide > + */ > + ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92); > + total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47; > + if (soft_slice_per_enc > 1) > + total_pixels += (ssm_delay * 3); > + dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width); > +} > + > +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc, > + struct dpu_hw_pingpong *hw_pp, > + struct msm_display_dsc_config *dsc, > + u32 common_mode) > +{ > + if (hw_dsc->ops.dsc_config) > + hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode); > + > + if (hw_dsc->ops.dsc_config_thresh) > + hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); > + > + if (hw_pp->ops.setup_dsc) > + hw_pp->ops.setup_dsc(hw_pp); > + > + if (hw_pp->ops.enable_dsc) > + hw_pp->ops.enable_dsc(hw_pp); > +} > + > +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc, > + struct msm_display_dsc_config *dsc) > +{ > + /* coding only for 2LM, 2enc, 1 dsc config */ > + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master; > + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; > + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; > + int this_frame_slices; > + int intf_ip_w, enc_ip_w; > + int dsc_common_mode; > + int pic_width; > + int i; > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { > + hw_pp[i] = dpu_enc->hw_pp[i]; > + hw_dsc[i] = dpu_enc->hw_dsc[i]; > + > + if (!hw_pp[i] || !hw_dsc[i]) { > + DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n"); > + return; > + } > + } > + > + dsc_common_mode = 0; > + pic_width = dsc->drm->pic_width; > + > + dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL; > + if (enc_master->intf_mode == INTF_MODE_VIDEO) > + dsc_common_mode |= DSC_MODE_VIDEO; > + > + this_frame_slices = pic_width / dsc->drm->slice_width; > + intf_ip_w = this_frame_slices * dsc->drm->slice_width; > + > + dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); > + > + /* > + * dsc merge case: when using 2 encoders for the same stream, > + * no. of slices need to be same on both the encoders. > + */ > + enc_ip_w = intf_ip_w / 2; > + dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w); > + > + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) > + dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode); > +} > + > void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > { > struct dpu_encoder_virt *dpu_enc; > @@ -1770,6 +1919,9 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) > dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]); > } > } > + > + if (dpu_enc->dsc) > + dpu_encoder_prep_dsc(dpu_enc, dpu_enc->dsc); > } > > void dpu_encoder_kickoff(struct drm_encoder *drm_enc) > @@ -2015,6 +2167,8 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, > dpu_enc->idle_pc_supported = > dpu_kms->catalog->caps->has_idle_pc; > > + dpu_enc->dsc = disp_info->dsc; > + > mutex_lock(&dpu_enc->enc_lock); > for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { > /* > @@ -2244,3 +2398,11 @@ enum dpu_intf_mode dpu_encoder_get_intf_mode(struct drm_encoder *encoder) > > return INTF_MODE_NONE; > } > + > +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc) > +{ > + struct drm_encoder *encoder = phys_enc->parent; > + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(encoder); > + > + return dpu_enc->dsc_mask; > +} > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > index e7270eb6b84b..7b90d644a41b 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h > @@ -332,6 +332,14 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( > return BLEND_3D_NONE; > } > > +/** > + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder > + * This helper function is used by physical encoder to get DSC blocks mask > + * used for this encoder. > + * @phys_enc: Pointer to physical encoder structure > + */ > +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); > + > /** > * dpu_encoder_helper_split_config - split display configuration helper function > * This helper function may be used by physical encoders to configure
On 23-03-22, 20:10, Vinod Koul wrote: > On 17-02-22, 23:32, Marijn Suijten wrote: > > On 2022-02-10 16:04:17, Vinod Koul wrote: > > > + > > > + slice_count = dsc->drm->slice_count; > > > + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); > > > + > > > + /* > > > + * If slice_count is greater than slice_per_intf then default to 1. > > > + * This can happen during partial update. > > > + */ > > > + if (slice_count > slice_per_intf) > > > + slice_count = 1; > > > + > > > + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * > > > + dsc->drm->bits_per_pixel, 8); > > > + total_bytes_per_intf = bytes_in_slice * slice_per_intf; > > > + > > > + dsc->eol_byte_num = total_bytes_per_intf % 3; > > > + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); > > > + dsc->bytes_in_slice = bytes_in_slice; > > > + dsc->bytes_per_pkt = bytes_in_slice * slice_count; > > > + dsc->pkt_per_line = slice_per_intf / slice_count; > > > +} > > > > I've seen the same calculations duplicated twice in dsi code. Since the > > msm_display_dsc_config struct is available in a header, perhaps a single > > - easily reviewable and maintainable - calculation function should be > > available there too? > > Let me try check if we can make it common.. I rechecked and we can actually remove this as we do this caln in timing and update the dsc structure there. So this fn is dropped now
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 1e648db439f9..95a7bf362e81 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -21,6 +21,7 @@ #include "dpu_hw_intf.h" #include "dpu_hw_ctl.h" #include "dpu_hw_dspp.h" +#include "dpu_hw_dsc.h" #include "dpu_formats.h" #include "dpu_encoder_phys.h" #include "dpu_crtc.h" @@ -136,6 +137,8 @@ enum dpu_enc_rc_states { * @cur_slave: As above but for the slave encoder. * @hw_pp: Handle to the pingpong blocks used for the display. No. * pingpong blocks can be different than num_phys_encs. + * @hw_dsc: Handle to the DSC blocks used for the display. + * @dsc_mask: The bitmask of used DSC blocks. * @intfs_swapped: Whether or not the phys_enc interfaces have been swapped * for partial update right-only cases, such as pingpong * split where virtual pingpong does not generate IRQs @@ -169,6 +172,7 @@ enum dpu_enc_rc_states { * @topology: topology of the display * @idle_timeout: idle timeout duration in milliseconds * @dp: msm_dp pointer, for DP encoders + * @dsc: msm_display_dsc_config pointer, for DSC-enabled encoders */ struct dpu_encoder_virt { struct drm_encoder base; @@ -182,6 +186,9 @@ struct dpu_encoder_virt { struct dpu_encoder_phys *cur_master; struct dpu_encoder_phys *cur_slave; struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; + + unsigned int dsc_mask; bool intfs_swapped; @@ -209,6 +216,9 @@ struct dpu_encoder_virt { u32 idle_timeout; struct msm_dp *dp; + + /* DSC configuration */ + struct msm_display_dsc_config *dsc; }; #define to_dpu_encoder_virt(x) container_of(x, struct dpu_encoder_virt, base) @@ -972,7 +982,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC]; struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC]; struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL }; - int num_lm, num_ctl, num_pp; + struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC]; + int num_lm, num_ctl, num_pp, num_dsc; int i, j; if (!drm_enc) { @@ -1027,6 +1038,23 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc, dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i]) : NULL; + dpu_enc->dsc_mask = 0; + + if (dpu_enc->dsc) { + unsigned int dsc_mask = 0; + + num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state, + drm_enc->base.id, DPU_HW_BLK_DSC, + hw_dsc, ARRAY_SIZE(hw_dsc)); + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) + dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) : NULL; + + for (i = 0; i < num_dsc; i++) + dsc_mask |= BIT(dpu_enc->hw_dsc[i]->idx - DSC_0); + + dpu_enc->dsc_mask = dsc_mask; + } + cstate = to_dpu_crtc_state(drm_crtc->state); for (i = 0; i < num_lm; i++) { @@ -1739,6 +1767,127 @@ static void dpu_encoder_vsync_event_work_handler(struct kthread_work *work) nsecs_to_jiffies(ktime_to_ns(wakeup_time))); } +static void +dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width) +{ + int slice_count, slice_per_intf; + int bytes_in_slice, total_bytes_per_intf; + + if (!dsc || !dsc->drm->slice_width || !dsc->drm->slice_count) { + DPU_ERROR("Invalid DSC/slices\n"); + return; + } + + slice_count = dsc->drm->slice_count; + slice_per_intf = DIV_ROUND_UP(width, dsc->drm->slice_width); + + /* + * If slice_count is greater than slice_per_intf then default to 1. + * This can happen during partial update. + */ + if (slice_count > slice_per_intf) + slice_count = 1; + + bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * + dsc->drm->bits_per_pixel, 8); + total_bytes_per_intf = bytes_in_slice * slice_per_intf; + + dsc->eol_byte_num = total_bytes_per_intf % 3; + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); + dsc->bytes_in_slice = bytes_in_slice; + dsc->bytes_per_pkt = bytes_in_slice * slice_count; + dsc->pkt_per_line = slice_per_intf / slice_count; +} + +static void +dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc, + u32 enc_ip_width) +{ + int ssm_delay, total_pixels, soft_slice_per_enc; + + soft_slice_per_enc = enc_ip_width / dsc->drm->slice_width; + + /* + * minimum number of initial line pixels is a sum of: + * 1. sub-stream multiplexer delay (83 groups for 8bpc, + * 91 for 10 bpc) * 3 + * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 + * 3. the initial xmit delay + * 4. total pipeline delay through the "lock step" of encoder (47) + * 5. 6 additional pixels as the output of the rate buffer is + * 48 bits wide + */ + ssm_delay = ((dsc->drm->bits_per_component < 10) ? 84 : 92); + total_pixels = ssm_delay * 3 + dsc->drm->initial_xmit_delay + 47; + if (soft_slice_per_enc > 1) + total_pixels += (ssm_delay * 3); + dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm->slice_width); +} + +static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc, + struct dpu_hw_pingpong *hw_pp, + struct msm_display_dsc_config *dsc, + u32 common_mode) +{ + if (hw_dsc->ops.dsc_config) + hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode); + + if (hw_dsc->ops.dsc_config_thresh) + hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); + + if (hw_pp->ops.setup_dsc) + hw_pp->ops.setup_dsc(hw_pp); + + if (hw_pp->ops.enable_dsc) + hw_pp->ops.enable_dsc(hw_pp); +} + +static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc, + struct msm_display_dsc_config *dsc) +{ + /* coding only for 2LM, 2enc, 1 dsc config */ + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master; + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; + int this_frame_slices; + int intf_ip_w, enc_ip_w; + int dsc_common_mode; + int pic_width; + int i; + + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { + hw_pp[i] = dpu_enc->hw_pp[i]; + hw_dsc[i] = dpu_enc->hw_dsc[i]; + + if (!hw_pp[i] || !hw_dsc[i]) { + DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n"); + return; + } + } + + dsc_common_mode = 0; + pic_width = dsc->drm->pic_width; + + dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL; + if (enc_master->intf_mode == INTF_MODE_VIDEO) + dsc_common_mode |= DSC_MODE_VIDEO; + + this_frame_slices = pic_width / dsc->drm->slice_width; + intf_ip_w = this_frame_slices * dsc->drm->slice_width; + + dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); + + /* + * dsc merge case: when using 2 encoders for the same stream, + * no. of slices need to be same on both the encoders. + */ + enc_ip_w = intf_ip_w / 2; + dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w); + + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) + dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc, dsc_common_mode); +} + void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) { struct dpu_encoder_virt *dpu_enc; @@ -1770,6 +1919,9 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc) dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]); } } + + if (dpu_enc->dsc) + dpu_encoder_prep_dsc(dpu_enc, dpu_enc->dsc); } void dpu_encoder_kickoff(struct drm_encoder *drm_enc) @@ -2015,6 +2167,8 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, dpu_enc->idle_pc_supported = dpu_kms->catalog->caps->has_idle_pc; + dpu_enc->dsc = disp_info->dsc; + mutex_lock(&dpu_enc->enc_lock); for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { /* @@ -2244,3 +2398,11 @@ enum dpu_intf_mode dpu_encoder_get_intf_mode(struct drm_encoder *encoder) return INTF_MODE_NONE; } + +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc) +{ + struct drm_encoder *encoder = phys_enc->parent; + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(encoder); + + return dpu_enc->dsc_mask; +} diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h index e7270eb6b84b..7b90d644a41b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h @@ -332,6 +332,14 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode( return BLEND_3D_NONE; } +/** + * dpu_encoder_helper_get_dsc - get DSC blocks mask for the DPU encoder + * This helper function is used by physical encoder to get DSC blocks mask + * used for this encoder. + * @phys_enc: Pointer to physical encoder structure + */ +unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc); + /** * dpu_encoder_helper_split_config - split display configuration helper function * This helper function may be used by physical encoders to configure
We need to configure the encoder for DSC configuration and calculate DSC parameters for the given timing so this patch adds that support by adding dpu_encoder_prep_dsc() which is invoked when DSC is enabled. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 164 +++++++++++++++++- .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 8 + 2 files changed, 171 insertions(+), 1 deletion(-)