| Message ID | CAGtn9rmosXZtSgn24gFNYTzkFrHgY+pQBNTiP-3N6-a8OX+HzA@mail.gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | scsi-staging crashing on boot | expand |
Ewan, > Anybody else hit this? We are seeing a crash right after boot. > Machine has an Emulex HBA, we don't see this on a similar machine > w/Qlogic. > > This was detected w/automation, we'll try backing out the last commit > (below) That would be great. I had lab problems yesterday so I didn't get a chance to complete my usual run prior to pushing.
> That would be great. I had lab problems yesterday so I didn't get a > chance to complete my usual run prior to pushing. Boots fine for me with lpfc (and a0af3d1104f7).
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index a56f01f659f8..f49ff18cb252 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8546,7 +8546,6 @@ static void lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba) { if (phba->wq) { - flush_workqueue(phba->wq); destroy_workqueue(phba->wq); phba->wq = NULL; }
Anybody else hit this? We are seeing a crash right after boot. Machine has an Emulex HBA, we don't see this on a similar machine w/Qlogic. This was detected w/automation, we'll try backing out the last commit (below) [ 29.339684] general protection fault, probably for non-canonical address 0xdead00000000012a: 0000 [#1] PREEMPT SMP PTI [ 29.340245] CPU: 23 PID: 0 Comm: swapper/23 Tainted: G S 5.17.0-rc1 #1 [ 29.340649] Hardware name: HP ProLiant DL360 Gen9, BIOS P89 07/20/2015 [ 29.340975] RIP: 0010:run_timer_softirq+0x137/0x420 [ 29.341611] Code: 83 ed 01 4c 8d 64 c4 08 49 8b 04 24 48 85 c0 74 db 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 48 89 02 48 85 c0 74 04 <48> 89 50 08 49 c7 47 08 00 00 00 00 4d 8b 6f 18 4c 89 f7 48 b8 22 [ 29.342903] RSP: 0000:ffffb930067c0f08 EFLAGS: 00010086 [ 29.343182] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000200 [ 29.343924] RDX: ffffb930067c0f10 RSI: ffff964c9fce0340 RDI: ffff964c9fce0368 [ 29.344692] RBP: 00000000fffbde00 R08: 0000000000000000 R09: 0000000000000000 [ 29.345446] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb930067c0f10 [ 29.346164] R13: ffffffff974060c8 R14: ffff964c9fce0340 R15: ffff9644c8866950 [ 29.346918] FS: 0000000000000000(0000) GS:ffff964c9fcc0000(0000) knlGS:0000000000000000 [ 29.347316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.347979] CR2: 00007f763b35e630 CR3: 0000000882010004 CR4: 00000000001706e0 [ 29.348697] Call Trace: [ 29.348853] <IRQ> [ 29.349326] ? recalibrate_cpu_khz+0x10/0x10 [ 29.349928] ? ktime_get+0x3e/0xa0 [ 29.350469] ? sched_clock_cpu+0xb/0xc0 [ 29.350674] __do_softirq+0xfa/0x2f7 [ 29.350904] irq_exit_rcu+0xc1/0xf0 [ 29.351445] sysvec_apic_timer_interrupt+0x9e/0xc0 [ 29.352054] </IRQ> [ 29.352524] <TASK> [ 29.353000] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 29.353273] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 29.353542] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 45 8a 96 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 9e 63 9d ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 29.354821] RSP: 0000:ffffb930063bbe80 EFLAGS: 00000202 [ 29.355084] RAX: ffff964c9fcc0000 RBX: 0000000000000002 RCX: 000000000000001f [ 29.355826] RDX: 00000006d4c7b9d9 RSI: ffffffff97177efb RDI: ffffffff97149f37 [ 29.356538] RBP: ffffd92fffcc0000 R08: 0000000000000004 R09: 000000000002f880 [ 29.357321] R10: 0000086674b91b40 R11: ffff964c9fceed84 R12: 00000006d4c7b9d9 [ 29.358041] R13: ffffffff978d49a0 R14: 0000000000000002 R15: 0000000000000000 [ 29.358769] cpuidle_enter+0x29/0x40 [ 29.358979] do_idle+0x261/0x2b0 [ 29.359515] cpu_startup_entry+0x19/0x20 [ 29.359718] start_secondary+0x114/0x150 [ 29.359946] secondary_startup_64_no_verify+0xd5/0xdb [ 29.360221] </TASK> [ 29.360352] Modules linke [ 32.033645] R13: ffffffff974060c8 R14: ffff964c9fce0340 R15: ffff9644c8866950 [ 32.033645] FS: 0000000000000000(0000) GS:ffff964c9fcc0000(0000) knlGS:0000000000000000 [ 32.033647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.033648] CR2: 00007f763b35e630 CR3: 0000000882010004 CR4: 00000000001706e0 [ 32.033649] Kernel panic - not syncing: Fatal exception in interrupt [ 32.102100] Kernel Offset: 0x14e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 32.366547] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- I notice the commit at the HEAD affected lpfc: commit d1d87c33f47dc69f948d51dcfed344e34c75c406 (HEAD -> staging, origin/staging, origin/for-next, origin/5.18/scsi-staging) Author: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Date: Thu Jan 27 01:43:30 2022 +0000 scsi: lpfc: Remove redundant flush_workqueue() call destroy_workqueue() already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant flush_workqueue() call. Link: https://lore.kernel.org/r/20220127014330.1185114-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> -Ewan