| Message ID | 1638422248-24221-1-git-send-email-quic_c_sanm@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] arm64: qcom: sc7280: Move USB2 controller nodes from common dtsi to SKU1 | expand |
On Thu, Dec 02, 2021 at 10:47:28AM +0530, Sandeep Maheswaram wrote: > Move USB2 controller and phy nodes from common dtsi file as it is > required only for SKU1 board and change the mode to host mode as > it will be used in host mode for SKU1. > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Quoting Sandeep Maheswaram (2021-12-01 21:17:28) > Move USB2 controller and phy nodes from common dtsi file as it is > required only for SKU1 board and change the mode to host mode as > it will be used in host mode for SKU1. > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Hi Bjorn, On 12/3/2021 4:22 AM, Stephen Boyd wrote: > Quoting Sandeep Maheswaram (2021-12-01 21:17:28) >> Move USB2 controller and phy nodes from common dtsi file as it is >> required only for SKU1 board and change the mode to host mode as >> it will be used in host mode for SKU1. >> >> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> >> --- > Reviewed-by: Stephen Boyd <swboyd@chromium.org> Can you merge this change in qcom tree?
On Thu, 2 Dec 2021 10:47:28 +0530, Sandeep Maheswaram wrote: > Move USB2 controller and phy nodes from common dtsi file as it is > required only for SKU1 board and change the mode to host mode as > it will be used in host mode for SKU1. > > Applied, thanks! [1/1] arm64: qcom: sc7280: Move USB2 controller nodes from common dtsi to SKU1 commit: 1b968998a3cbd346e7b01a5b41f4c88b979ae7d5 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 9b991ba..ffd483d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -80,3 +80,19 @@ qcom,pre-scaling = <1 1>; }; }; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index d623d71..c54ad62 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -398,22 +398,6 @@ vdda-pll-supply = <&vreg_l1b_0p8>; }; -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdda-pll-supply = <&vreg_l10c_0p8>; - vdda33-supply = <&vreg_l2b_3p0>; - vdda18-supply = <&vreg_l1c_1p8>; -}; - &uart7 { status = "okay";
Move USB2 controller and phy nodes from common dtsi file as it is required only for SKU1 board and change the mode to host mode as it will be used in host mode for SKU1. Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> --- v2: Squashed the two patches in v1 and changed the commit message. arch/arm64/boot/dts/qcom/sc7280-idp.dts | 16 ++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)