| Message ID | 20211212201844.114949-4-aouledameur@baylibre.com |
|---|---|
| State | New |
| Headers | show |
| Series | usb: meson: fix shared reset control use | expand |
On Sun, Dec 12, 2021 at 9:20 PM Amjad Ouled-Ameur <aouledameur@baylibre.com> wrote: > > Use reset_control_rearm() call if an error occurs in case > phy_meson8b_usb2_power_on() fails after reset() has been called, or in > case phy_meson8b_usb2_power_off() is called i.e the resource is no longer > used and the reset line may be triggered again by other devices. > > reset_control_rearm() keeps use of triggered_count sane in the reset > framework, use of reset_control_reset() on shared reset line should > be balanced with reset_control_rearm(). > > Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> > Reported-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c index 77e7e9b1428c..dd96763911b8 100644 --- a/drivers/phy/amlogic/phy-meson8b-usb2.c +++ b/drivers/phy/amlogic/phy-meson8b-usb2.c @@ -154,6 +154,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) ret = clk_prepare_enable(priv->clk_usb_general); if (ret) { dev_err(&phy->dev, "Failed to enable USB general clock\n"); + reset_control_rearm(priv->reset); return ret; } @@ -161,6 +162,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) if (ret) { dev_err(&phy->dev, "Failed to enable USB DDR clock\n"); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); return ret; } @@ -199,6 +201,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) dev_warn(&phy->dev, "USB ID detect failed!\n"); clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); return -EINVAL; } } @@ -218,6 +221,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy) clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); + reset_control_rearm(priv->reset); /* power off the PHY by putting it into reset mode */ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
Use reset_control_rearm() call if an error occurs in case phy_meson8b_usb2_power_on() fails after reset() has been called, or in case phy_meson8b_usb2_power_off() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/phy/amlogic/phy-meson8b-usb2.c | 4 ++++ 1 file changed, 4 insertions(+)