diff mbox series

[v4,07/13] clk: imx: Add initial support for i.MXRT clock driver

Message ID 20211204061042.1248028-8-Mr.Bossman075@gmail.com
State Superseded
Headers show
Series Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC. | expand

Commit Message

Jesse T Dec. 4, 2021, 6:10 a.m. UTC
Add clock driver support for i.MXRT1***s starting with the i.MXRT1050.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
V1->V2:
* Kconfig: Add new line
* clk-imxrt.c: Remove unused const
* clk-imxrt.c: Remove set parents
* clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
V2->V3:
* Remove unused ANATOP_BASE_ADDR
* Move to hw API
* Add GPT's own clock
* Add SEMC clocks to set muxing to CRITICAL
V3->V4:
* Rename clk-imxrt.c to clk-imxrt1050.c
* Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050
* Make CONFIG_CLK_IMXRT1050 selectable
---
 drivers/clk/imx/Kconfig         |   5 +
 drivers/clk/imx/Makefile        |   1 +
 drivers/clk/imx/clk-imxrt1050.c | 156 ++++++++++++++++++++++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imxrt1050.c

Comments

Abel Vesa Dec. 13, 2021, 11:30 a.m. UTC | #1
On 21-12-04 01:10:36, Jesse Taube wrote:
> Add clock driver support for i.MXRT1***s starting with the i.MXRT1050.
> 
> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> ---
> V1->V2:
> * Kconfig: Add new line
> * clk-imxrt.c: Remove unused const
> * clk-imxrt.c: Remove set parents
> * clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
> V2->V3:
> * Remove unused ANATOP_BASE_ADDR
> * Move to hw API
> * Add GPT's own clock
> * Add SEMC clocks to set muxing to CRITICAL
> V3->V4:
> * Rename clk-imxrt.c to clk-imxrt1050.c
> * Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050
> * Make CONFIG_CLK_IMXRT1050 selectable
> ---
>  drivers/clk/imx/Kconfig         |   5 +
>  drivers/clk/imx/Makefile        |   1 +
>  drivers/clk/imx/clk-imxrt1050.c | 156 ++++++++++++++++++++++++++++++++
>  3 files changed, 162 insertions(+)
>  create mode 100644 drivers/clk/imx/clk-imxrt1050.c
> 
> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
> index c08edbd04d22..f697652ab19c 100644
> --- a/drivers/clk/imx/Kconfig
> +++ b/drivers/clk/imx/Kconfig
> @@ -105,3 +105,8 @@ config CLK_IMX8ULP
>  	select MXC_CLK
>  	help
>  	    Build the driver for i.MX8ULP CCM Clock Driver
> +
> +config CLK_IMXRT1050
> +	bool "IMXRT1050 CCM Clock Driver"
> +	depends on SOC_IMXRT
> +	select MXC_CLK
> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
> index b5e040026dfb..3d9a1e3b5fc6 100644
> --- a/drivers/clk/imx/Makefile
> +++ b/drivers/clk/imx/Makefile
> @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
>  obj-$(CONFIG_CLK_IMX7D)  += clk-imx7d.o
>  obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
>  obj-$(CONFIG_CLK_VF610)  += clk-vf610.o
> +obj-$(CONFIG_CLK_IMXRT1050)  += clk-imxrt1050.o
> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
> new file mode 100644
> index 000000000000..85ba1a240335
> --- /dev/null
> +++ b/drivers/clk/imx/clk-imxrt1050.c
> @@ -0,0 +1,156 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2021
> + * Author(s):
> + * Jesse Taube <Mr.Bossman075@gmail.com>
> + * Giulio Benetti <giulio.benetti@benettiengineering.com>
> + */
> +#include <linux/mm.h>
> +#include <linux/delay.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/sizes.h>
> +#include <soc/imx/revision.h>
> +#include <dt-bindings/clock/imxrt1050-clock.h>
> +
> +#include "clk.h"
> +
> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
> +static const char * const per_sels[] = {"ipg_pdof", "osc", };
> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
> +static const char *const pre_periph_sels[] = {
> +	"pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
> +static const char *const lcdif_sels[] = {
> +	"pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
> +	"pll2_pfd1_594m", "pll3_pfd1_664_62m", };
> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", };
> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
> +
> +static struct clk_hw **hws;
> +static struct clk_hw_onecell_data *clk_hw_data;
> +
> +static void __init imxrt_clocks_common_init(void __iomem *base)
> +{
> +	/* Anatop clocks */
> +	hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL);
> +
> +	hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel",
> +		base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
> +	hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel",
> +		base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
> +	hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel",
> +		base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
> +	hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel",
> +		base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
> +
> +	hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm",
> +		"pll1_arm_ref_sel", base + 0x0, 0x7f);
> +	hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
> +		"pll2_sys_ref_sel", base + 0x30, 0x1);
> +	hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
> +		"pll3_usb_otg_ref_sel", base + 0x10, 0x1);
> +	hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video",
> +		"pll5_video_ref_sel", base + 0xa0, 0x7f);
> +
> +	/* PLL bypass out */
> +	hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1,
> +		pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
> +	hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1,
> +		pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
> +	hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1,
> +		pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
> +	hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
> +		pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
> +
> +	hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel",
> +		"pll5_video", base + 0xa0, 19, 2);
> +	hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div",
> +		"video_post_div_sel", base + 0x170, 30, 2);
> +
> +	hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m",  "pll3_usb_otg", 1, 6);
> +
> +	hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
> +	hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
> +	hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
> +	hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
> +	hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
> +}
> +
> +static void __init imxrt1050_clocks_init(struct device_node *np)
> +{
> +	void __iomem *ccm_base;
> +	void __iomem *pll_base;
> +	struct device_node *anp;
> +
> +	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
> +					  IMXRT1050_CLK_END), GFP_KERNEL);
> +	if (WARN_ON(!clk_hw_data))
> +		return;
> +
> +	clk_hw_data->num = IMXRT1050_CLK_END;
> +	hws = clk_hw_data->hws;
> +
> +	hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc"));
> +
> +	anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
> +	pll_base = of_iomap(anp, 0);
> +	WARN_ON(!pll_base);
> +	imxrt_clocks_common_init(pll_base);
> +	/* CCM clocks */
> +	ccm_base = of_iomap(np, 0);
> +	WARN_ON(!ccm_base);
> +
> +	hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
> +	hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
> +		pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
> +	hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1,
> +		periph_sels, ARRAY_SIZE(periph_sels));
> +	hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
> +	hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
> +	hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
> +		lpuart_sels, ARRAY_SIZE(lpuart_sels));
> +	hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
> +		lcdif_sels, ARRAY_SIZE(lcdif_sels));
> +	hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1,
> +		per_sels, ARRAY_SIZE(per_sels));
> +	hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1,
> +		semc_alt_sels, ARRAY_SIZE(semc_alt_sels));
> +	hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1,
> +		semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL);
> +
> +	hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
> +	hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
> +	hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
> +
> +	hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
> +	hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
> +	hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
> +	hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
> +	hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
> +
> +	hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
> +	hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
> +	hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
> +	hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
> +	hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6);
> +	hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
> +	hws[IMXRT1050_CLK_GPT] = imx_clk_hw_fixed_factor("gpt", "osc", 1, 8);
> +	imx_check_clk_hws(hws, IMXRT1050_CLK_END);
> +
> +	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
> +}
> +CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);

I would suggest module platform driver instead.

Sorry for the late review.

> -- 
> 2.34.0
>
Giulio Benetti Dec. 13, 2021, 12:05 p.m. UTC | #2
Hi Abel,

On 13/12/21 12:30, Abel Vesa wrote:
> On 21-12-04 01:10:36, Jesse Taube wrote:
>> Add clock driver support for i.MXRT1***s starting with the i.MXRT1050.
>>
>> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
>> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
>> ---
>> V1->V2:
>> * Kconfig: Add new line
>> * clk-imxrt.c: Remove unused const
>> * clk-imxrt.c: Remove set parents
>> * clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
>> V2->V3:
>> * Remove unused ANATOP_BASE_ADDR
>> * Move to hw API
>> * Add GPT's own clock
>> * Add SEMC clocks to set muxing to CRITICAL
>> V3->V4:
>> * Rename clk-imxrt.c to clk-imxrt1050.c
>> * Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050
>> * Make CONFIG_CLK_IMXRT1050 selectable
>> ---
>>   drivers/clk/imx/Kconfig         |   5 +
>>   drivers/clk/imx/Makefile        |   1 +
>>   drivers/clk/imx/clk-imxrt1050.c | 156 ++++++++++++++++++++++++++++++++
>>   3 files changed, 162 insertions(+)
>>   create mode 100644 drivers/clk/imx/clk-imxrt1050.c
>>
>> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
>> index c08edbd04d22..f697652ab19c 100644
>> --- a/drivers/clk/imx/Kconfig
>> +++ b/drivers/clk/imx/Kconfig
>> @@ -105,3 +105,8 @@ config CLK_IMX8ULP
>>   	select MXC_CLK
>>   	help
>>   	    Build the driver for i.MX8ULP CCM Clock Driver
>> +
>> +config CLK_IMXRT1050
>> +	bool "IMXRT1050 CCM Clock Driver"
>> +	depends on SOC_IMXRT
>> +	select MXC_CLK
>> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
>> index b5e040026dfb..3d9a1e3b5fc6 100644
>> --- a/drivers/clk/imx/Makefile
>> +++ b/drivers/clk/imx/Makefile
>> @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
>>   obj-$(CONFIG_CLK_IMX7D)  += clk-imx7d.o
>>   obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
>>   obj-$(CONFIG_CLK_VF610)  += clk-vf610.o
>> +obj-$(CONFIG_CLK_IMXRT1050)  += clk-imxrt1050.o
>> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
>> new file mode 100644
>> index 000000000000..85ba1a240335
>> --- /dev/null
>> +++ b/drivers/clk/imx/clk-imxrt1050.c
>> @@ -0,0 +1,156 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * Copyright (C) 2021
>> + * Author(s):
>> + * Jesse Taube <Mr.Bossman075@gmail.com>
>> + * Giulio Benetti <giulio.benetti@benettiengineering.com>
>> + */
>> +#include <linux/mm.h>
>> +#include <linux/delay.h>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/err.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/sizes.h>
>> +#include <soc/imx/revision.h>
>> +#include <dt-bindings/clock/imxrt1050-clock.h>
>> +
>> +#include "clk.h"
>> +
>> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
>> +static const char * const per_sels[] = {"ipg_pdof", "osc", };
>> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
>> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
>> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
>> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
>> +static const char *const pre_periph_sels[] = {
>> +	"pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
>> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
>> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
>> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
>> +static const char *const lcdif_sels[] = {
>> +	"pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
>> +	"pll2_pfd1_594m", "pll3_pfd1_664_62m", };
>> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", };
>> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
>> +
>> +static struct clk_hw **hws;
>> +static struct clk_hw_onecell_data *clk_hw_data;
>> +
>> +static void __init imxrt_clocks_common_init(void __iomem *base)
>> +{
>> +	/* Anatop clocks */
>> +	hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL);
>> +
>> +	hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel",
>> +		base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +	hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel",
>> +		base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +	hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel",
>> +		base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +	hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel",
>> +		base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>> +
>> +	hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm",
>> +		"pll1_arm_ref_sel", base + 0x0, 0x7f);
>> +	hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
>> +		"pll2_sys_ref_sel", base + 0x30, 0x1);
>> +	hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
>> +		"pll3_usb_otg_ref_sel", base + 0x10, 0x1);
>> +	hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video",
>> +		"pll5_video_ref_sel", base + 0xa0, 0x7f);
>> +
>> +	/* PLL bypass out */
>> +	hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1,
>> +		pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
>> +	hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1,
>> +		pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
>> +	hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1,
>> +		pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
>> +	hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
>> +		pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
>> +
>> +	hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel",
>> +		"pll5_video", base + 0xa0, 19, 2);
>> +	hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div",
>> +		"video_post_div_sel", base + 0x170, 30, 2);
>> +
>> +	hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m",  "pll3_usb_otg", 1, 6);
>> +
>> +	hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
>> +	hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
>> +	hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
>> +	hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
>> +	hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
>> +}
>> +
>> +static void __init imxrt1050_clocks_init(struct device_node *np)
>> +{
>> +	void __iomem *ccm_base;
>> +	void __iomem *pll_base;
>> +	struct device_node *anp;
>> +
>> +	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
>> +					  IMXRT1050_CLK_END), GFP_KERNEL);
>> +	if (WARN_ON(!clk_hw_data))
>> +		return;
>> +
>> +	clk_hw_data->num = IMXRT1050_CLK_END;
>> +	hws = clk_hw_data->hws;
>> +
>> +	hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc"));
>> +
>> +	anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
>> +	pll_base = of_iomap(anp, 0);
>> +	WARN_ON(!pll_base);
>> +	imxrt_clocks_common_init(pll_base);
>> +	/* CCM clocks */
>> +	ccm_base = of_iomap(np, 0);
>> +	WARN_ON(!ccm_base);
>> +
>> +	hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
>> +	hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
>> +		pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
>> +	hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1,
>> +		periph_sels, ARRAY_SIZE(periph_sels));
>> +	hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
>> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
>> +	hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
>> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
>> +	hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
>> +		lpuart_sels, ARRAY_SIZE(lpuart_sels));
>> +	hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
>> +		lcdif_sels, ARRAY_SIZE(lcdif_sels));
>> +	hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1,
>> +		per_sels, ARRAY_SIZE(per_sels));
>> +	hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1,
>> +		semc_alt_sels, ARRAY_SIZE(semc_alt_sels));
>> +	hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1,
>> +		semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL);
>> +
>> +	hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
>> +	hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
>> +	hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
>> +
>> +	hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
>> +	hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
>> +	hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
>> +	hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
>> +	hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
>> +
>> +	hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
>> +	hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
>> +	hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
>> +	hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
>> +	hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6);
>> +	hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
>> +	hws[IMXRT1050_CLK_GPT] = imx_clk_hw_fixed_factor("gpt", "osc", 1, 8);
>> +	imx_check_clk_hws(hws, IMXRT1050_CLK_END);
>> +
>> +	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
>> +}
>> +CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);
> 
> I would suggest module platform driver instead.

Can you please point us an example?

> Sorry for the late review.

No problem

Thank you
Best regards
Giulio Benetti Dec. 13, 2021, 12:11 p.m. UTC | #3
Hi Abel, Jesse,

On 13/12/21 13:05, Giulio Benetti wrote:
> Hi Abel,
> 
> On 13/12/21 12:30, Abel Vesa wrote:
>> On 21-12-04 01:10:36, Jesse Taube wrote:
>>> Add clock driver support for i.MXRT1***s starting with the i.MXRT1050.
>>>
>>> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
>>> Suggested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
>>> ---
>>> V1->V2:
>>> * Kconfig: Add new line
>>> * clk-imxrt.c: Remove unused const
>>> * clk-imxrt.c: Remove set parents
>>> * clk-imxrt.c: Use fsl,imxrt-anatop for anatop base address
>>> V2->V3:
>>> * Remove unused ANATOP_BASE_ADDR
>>> * Move to hw API
>>> * Add GPT's own clock
>>> * Add SEMC clocks to set muxing to CRITICAL
>>> V3->V4:
>>> * Rename clk-imxrt.c to clk-imxrt1050.c
>>> * Rename CONFIG_CLK_IMXRT to CONFIG_CLK_IMXRT1050
>>> * Make CONFIG_CLK_IMXRT1050 selectable
>>> ---
>>>    drivers/clk/imx/Kconfig         |   5 +
>>>    drivers/clk/imx/Makefile        |   1 +
>>>    drivers/clk/imx/clk-imxrt1050.c | 156 ++++++++++++++++++++++++++++++++
>>>    3 files changed, 162 insertions(+)
>>>    create mode 100644 drivers/clk/imx/clk-imxrt1050.c
>>>
>>> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
>>> index c08edbd04d22..f697652ab19c 100644
>>> --- a/drivers/clk/imx/Kconfig
>>> +++ b/drivers/clk/imx/Kconfig
>>> @@ -105,3 +105,8 @@ config CLK_IMX8ULP
>>>    	select MXC_CLK
>>>    	help
>>>    	    Build the driver for i.MX8ULP CCM Clock Driver
>>> +
>>> +config CLK_IMXRT1050
>>> +	bool "IMXRT1050 CCM Clock Driver"
>>> +	depends on SOC_IMXRT
>>> +	select MXC_CLK
>>> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
>>> index b5e040026dfb..3d9a1e3b5fc6 100644
>>> --- a/drivers/clk/imx/Makefile
>>> +++ b/drivers/clk/imx/Makefile
>>> @@ -47,3 +47,4 @@ obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
>>>    obj-$(CONFIG_CLK_IMX7D)  += clk-imx7d.o
>>>    obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
>>>    obj-$(CONFIG_CLK_VF610)  += clk-vf610.o
>>> +obj-$(CONFIG_CLK_IMXRT1050)  += clk-imxrt1050.o
>>> diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
>>> new file mode 100644
>>> index 000000000000..85ba1a240335
>>> --- /dev/null
>>> +++ b/drivers/clk/imx/clk-imxrt1050.c
>>> @@ -0,0 +1,156 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * Copyright (C) 2021
>>> + * Author(s):
>>> + * Jesse Taube <Mr.Bossman075@gmail.com>
>>> + * Giulio Benetti <giulio.benetti@benettiengineering.com>
>>> + */
>>> +#include <linux/mm.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/clk.h>
>>> +#include <linux/io.h>
>>> +#include <linux/clkdev.h>
>>> +#include <linux/clk-provider.h>
>>> +#include <linux/err.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/of_irq.h>
>>> +#include <linux/sizes.h>
>>> +#include <soc/imx/revision.h>
>>> +#include <dt-bindings/clock/imxrt1050-clock.h>
>>> +
>>> +#include "clk.h"
>>> +
>>> +static const char * const pll_ref_sels[] = {"osc", "dummy", };
>>> +static const char * const per_sels[] = {"ipg_pdof", "osc", };
>>> +static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
>>> +static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
>>> +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
>>> +static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
>>> +static const char *const pre_periph_sels[] = {
>>> +	"pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
>>> +static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
>>> +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
>>> +static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
>>> +static const char *const lcdif_sels[] = {
>>> +	"pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
>>> +	"pll2_pfd1_594m", "pll3_pfd1_664_62m", };
>>> +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", };
>>> +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
>>> +
>>> +static struct clk_hw **hws;
>>> +static struct clk_hw_onecell_data *clk_hw_data;
>>> +
>>> +static void __init imxrt_clocks_common_init(void __iomem *base)
>>> +{
>>> +	/* Anatop clocks */
>>> +	hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL);
>>> +
>>> +	hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel",
>>> +		base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>>> +	hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel",
>>> +		base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>>> +	hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel",
>>> +		base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>>> +	hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel",
>>> +		base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
>>> +
>>> +	hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm",
>>> +		"pll1_arm_ref_sel", base + 0x0, 0x7f);
>>> +	hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
>>> +		"pll2_sys_ref_sel", base + 0x30, 0x1);
>>> +	hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
>>> +		"pll3_usb_otg_ref_sel", base + 0x10, 0x1);
>>> +	hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video",
>>> +		"pll5_video_ref_sel", base + 0xa0, 0x7f);
>>> +
>>> +	/* PLL bypass out */
>>> +	hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1,
>>> +		pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
>>> +	hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1,
>>> +		pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
>>> +	hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1,
>>> +		pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
>>> +	hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
>>> +		pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
>>> +
>>> +	hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel",
>>> +		"pll5_video", base + 0xa0, 19, 2);
>>> +	hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div",
>>> +		"video_post_div_sel", base + 0x170, 30, 2);
>>> +
>>> +	hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m",  "pll3_usb_otg", 1, 6);
>>> +
>>> +	hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
>>> +	hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
>>> +	hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
>>> +	hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
>>> +	hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
>>> +}
>>> +
>>> +static void __init imxrt1050_clocks_init(struct device_node *np)
>>> +{
>>> +	void __iomem *ccm_base;
>>> +	void __iomem *pll_base;
>>> +	struct device_node *anp;
>>> +
>>> +	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
>>> +					  IMXRT1050_CLK_END), GFP_KERNEL);
>>> +	if (WARN_ON(!clk_hw_data))
>>> +		return;
>>> +
>>> +	clk_hw_data->num = IMXRT1050_CLK_END;
>>> +	hws = clk_hw_data->hws;
>>> +
>>> +	hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc"));
>>> +
>>> +	anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
>>> +	pll_base = of_iomap(anp, 0);
>>> +	WARN_ON(!pll_base);
>>> +	imxrt_clocks_common_init(pll_base);
>>> +	/* CCM clocks */
>>> +	ccm_base = of_iomap(np, 0);
>>> +	WARN_ON(!ccm_base);
>>> +
>>> +	hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
>>> +	hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
>>> +		pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
>>> +	hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1,
>>> +		periph_sels, ARRAY_SIZE(periph_sels));
>>> +	hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
>>> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
>>> +	hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
>>> +		usdhc_sels, ARRAY_SIZE(usdhc_sels));
>>> +	hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
>>> +		lpuart_sels, ARRAY_SIZE(lpuart_sels));
>>> +	hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
>>> +		lcdif_sels, ARRAY_SIZE(lcdif_sels));
>>> +	hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1,
>>> +		per_sels, ARRAY_SIZE(per_sels));
>>> +	hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1,
>>> +		semc_alt_sels, ARRAY_SIZE(semc_alt_sels));
>>> +	hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1,
>>> +		semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL);
>>> +
>>> +	hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
>>> +	hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
>>> +	hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
>>> +
>>> +	hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
>>> +	hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
>>> +	hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
>>> +	hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
>>> +	hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
>>> +
>>> +	hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
>>> +	hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
>>> +	hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
>>> +	hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
>>> +	hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6);
>>> +	hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
>>> +	hws[IMXRT1050_CLK_GPT] = imx_clk_hw_fixed_factor("gpt", "osc", 1, 8);
>>> +	imx_check_clk_hws(hws, IMXRT1050_CLK_END);
>>> +
>>> +	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
>>> +}
>>> +CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);
>>
>> I would suggest module platform driver instead.
> 
> Can you please point us an example?

Sorry, I've found already the clk-imx8mq.c as an example.

@Jesse, if you want here is a change to do on this driver or let me know 
if I have to make it.

Thank you all
Best regards
Fabio Estevam Dec. 13, 2021, 12:14 p.m. UTC | #4
Hi Giulio,

On Mon, Dec 13, 2021 at 9:06 AM Giulio Benetti
<giulio.benetti@benettiengineering.com> wrote:

> > I would suggest module platform driver instead.
>
> Can you please point us an example?

Here is an example of a commit that converts the imx8mm clk driver to
platform driver:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.7&id=af7e7ee0e4280c29c41b6ec64b892bb53987a997
Giulio Benetti Dec. 13, 2021, 12:42 p.m. UTC | #5
Hi Fabio,

> Il giorno 13 dic 2021, alle ore 13:15, Fabio Estevam <festevam@gmail.com> ha scritto:
> 
> Hi Giulio,
> 
> On Mon, Dec 13, 2021 at 9:06 AM Giulio Benetti
> <giulio.benetti@benettiengineering.com> wrote:
> 
>>> I would suggest module platform driver instead.
>> 
>> Can you please point us an example?
> 
> Here is an example of a commit that converts the imx8mm clk driver to
> platform driver:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.7&id=af7e7ee0e4280c29c41b6ec64b892bb53987a997

Thanks a lot, this ease us

Best regards
Giulio
diff mbox series

Patch

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index c08edbd04d22..f697652ab19c 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -105,3 +105,8 @@  config CLK_IMX8ULP
 	select MXC_CLK
 	help
 	    Build the driver for i.MX8ULP CCM Clock Driver
+
+config CLK_IMXRT1050
+	bool "IMXRT1050 CCM Clock Driver"
+	depends on SOC_IMXRT
+	select MXC_CLK
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index b5e040026dfb..3d9a1e3b5fc6 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -47,3 +47,4 @@  obj-$(CONFIG_CLK_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_CLK_IMX7D)  += clk-imx7d.o
 obj-$(CONFIG_CLK_IMX7ULP) += clk-imx7ulp.o
 obj-$(CONFIG_CLK_VF610)  += clk-vf610.o
+obj-$(CONFIG_CLK_IMXRT1050)  += clk-imxrt1050.o
diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
new file mode 100644
index 000000000000..85ba1a240335
--- /dev/null
+++ b/drivers/clk/imx/clk-imxrt1050.c
@@ -0,0 +1,156 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2021
+ * Author(s):
+ * Jesse Taube <Mr.Bossman075@gmail.com>
+ * Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sizes.h>
+#include <soc/imx/revision.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+
+#include "clk.h"
+
+static const char * const pll_ref_sels[] = {"osc", "dummy", };
+static const char * const per_sels[] = {"ipg_pdof", "osc", };
+static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", };
+static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", };
+static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", };
+static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", };
+static const char *const pre_periph_sels[] = {
+	"pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", };
+static const char *const periph_sels[] = { "pre_periph_sel", "todo", };
+static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *const lpuart_sels[] = { "pll3_80m", "osc", };
+static const char *const lcdif_sels[] = {
+	"pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m",
+	"pll2_pfd1_594m", "pll3_pfd1_664_62m", };
+static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", };
+static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", };
+
+static struct clk_hw **hws;
+static struct clk_hw_onecell_data *clk_hw_data;
+
+static void __init imxrt_clocks_common_init(void __iomem *base)
+{
+	/* Anatop clocks */
+	hws[IMXRT1050_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0UL);
+
+	hws[IMXRT1050_CLK_PLL1_REF_SEL] = imx_clk_hw_mux("pll1_arm_ref_sel",
+		base + 0x0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	hws[IMXRT1050_CLK_PLL2_REF_SEL] = imx_clk_hw_mux("pll2_sys_ref_sel",
+		base + 0x30, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	hws[IMXRT1050_CLK_PLL3_REF_SEL] = imx_clk_hw_mux("pll3_usb_otg_ref_sel",
+		base + 0x10, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	hws[IMXRT1050_CLK_PLL5_REF_SEL] = imx_clk_hw_mux("pll5_video_ref_sel",
+		base + 0xa0, 14, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+
+	hws[IMXRT1050_CLK_PLL1_ARM] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1_arm",
+		"pll1_arm_ref_sel", base + 0x0, 0x7f);
+	hws[IMXRT1050_CLK_PLL2_SYS] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2_sys",
+		"pll2_sys_ref_sel", base + 0x30, 0x1);
+	hws[IMXRT1050_CLK_PLL3_USB_OTG] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3_usb_otg",
+		"pll3_usb_otg_ref_sel", base + 0x10, 0x1);
+	hws[IMXRT1050_CLK_PLL5_VIDEO] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5_video",
+		"pll5_video_ref_sel", base + 0xa0, 0x7f);
+
+	/* PLL bypass out */
+	hws[IMXRT1050_CLK_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x0, 16, 1,
+		pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+	hws[IMXRT1050_CLK_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1,
+		pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+	hws[IMXRT1050_CLK_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1,
+		pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+	hws[IMXRT1050_CLK_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1,
+		pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+
+	hws[IMXRT1050_CLK_VIDEO_POST_DIV_SEL] = imx_clk_hw_divider("video_post_div_sel",
+		"pll5_video", base + 0xa0, 19, 2);
+	hws[IMXRT1050_CLK_VIDEO_DIV] = imx_clk_hw_divider("video_div",
+		"video_post_div_sel", base + 0x170, 30, 2);
+
+	hws[IMXRT1050_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m",  "pll3_usb_otg", 1, 6);
+
+	hws[IMXRT1050_CLK_PLL2_PFD0_352M] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0);
+	hws[IMXRT1050_CLK_PLL2_PFD1_594M] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1);
+	hws[IMXRT1050_CLK_PLL2_PFD2_396M] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2);
+	hws[IMXRT1050_CLK_PLL3_PFD1_664_62M] = imx_clk_hw_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1);
+	hws[IMXRT1050_CLK_PLL3_PFD3_454_74M] = imx_clk_hw_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3);
+}
+
+static void __init imxrt1050_clocks_init(struct device_node *np)
+{
+	void __iomem *ccm_base;
+	void __iomem *pll_base;
+	struct device_node *anp;
+
+	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
+					  IMXRT1050_CLK_END), GFP_KERNEL);
+	if (WARN_ON(!clk_hw_data))
+		return;
+
+	clk_hw_data->num = IMXRT1050_CLK_END;
+	hws = clk_hw_data->hws;
+
+	hws[IMXRT1050_CLK_OSC] = __clk_get_hw(of_clk_get_by_name(np, "osc"));
+
+	anp = of_find_compatible_node(NULL, NULL, "fsl,imxrt-anatop");
+	pll_base = of_iomap(anp, 0);
+	WARN_ON(!pll_base);
+	imxrt_clocks_common_init(pll_base);
+	/* CCM clocks */
+	ccm_base = of_iomap(np, 0);
+	WARN_ON(!ccm_base);
+
+	hws[IMXRT1050_CLK_ARM_PODF] = imx_clk_hw_divider("arm_podf", "pll1_arm", ccm_base + 0x10, 0, 3);
+	hws[IMXRT1050_CLK_PRE_PERIPH_SEL] = imx_clk_hw_mux("pre_periph_sel", ccm_base + 0x18, 18, 2,
+		pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
+	hws[IMXRT1050_CLK_PERIPH_SEL] = imx_clk_hw_mux("periph_sel", ccm_base + 0x14, 25, 1,
+		periph_sels, ARRAY_SIZE(periph_sels));
+	hws[IMXRT1050_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", ccm_base + 0x1c, 16, 1,
+		usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	hws[IMXRT1050_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", ccm_base + 0x1c, 17, 1,
+		usdhc_sels, ARRAY_SIZE(usdhc_sels));
+	hws[IMXRT1050_CLK_LPUART_SEL] = imx_clk_hw_mux("lpuart_sel", ccm_base + 0x24, 6, 1,
+		lpuart_sels, ARRAY_SIZE(lpuart_sels));
+	hws[IMXRT1050_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", ccm_base + 0x38, 15, 3,
+		lcdif_sels, ARRAY_SIZE(lcdif_sels));
+	hws[IMXRT1050_CLK_PER_CLK_SEL] = imx_clk_hw_mux("per_sel", ccm_base + 0x1C, 6, 1,
+		per_sels, ARRAY_SIZE(per_sels));
+	hws[IMXRT1050_CLK_SEMC_ALT_SEL] = imx_clk_hw_mux("semc_alt_sel", ccm_base + 0x14, 7, 1,
+		semc_alt_sels, ARRAY_SIZE(semc_alt_sels));
+	hws[IMXRT1050_CLK_SEMC_SEL] = imx_clk_hw_mux_flags("semc_sel", ccm_base + 0x14, 6, 1,
+		semc_sels, ARRAY_SIZE(semc_sels), CLK_IS_CRITICAL);
+
+	hws[IMXRT1050_CLK_AHB_PODF] = imx_clk_hw_divider("ahb", "periph_sel", ccm_base + 0x14, 10, 3);
+	hws[IMXRT1050_CLK_IPG_PDOF] = imx_clk_hw_divider("ipg", "ahb", ccm_base + 0x14, 8, 2);
+	hws[IMXRT1050_CLK_PER_PDOF] = imx_clk_hw_divider("per", "per_sel", ccm_base + 0x1C, 0, 5);
+
+	hws[IMXRT1050_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", ccm_base + 0x24, 11, 3);
+	hws[IMXRT1050_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", ccm_base + 0x24, 16, 3);
+	hws[IMXRT1050_CLK_LPUART_PODF] = imx_clk_hw_divider("lpuart_podf", "lpuart_sel", ccm_base + 0x24, 0, 6);
+	hws[IMXRT1050_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_sel", ccm_base + 0x38, 12, 3);
+	hws[IMXRT1050_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", ccm_base + 0x18, 23, 3);
+
+	hws[IMXRT1050_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", ccm_base + 0x80, 2);
+	hws[IMXRT1050_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", ccm_base + 0x80, 4);
+	hws[IMXRT1050_CLK_LPUART1] = imx_clk_hw_gate2("lpuart1", "lpuart_podf", ccm_base + 0x7c, 24);
+	hws[IMXRT1050_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif", "lcdif_podf", ccm_base + 0x74, 10);
+	hws[IMXRT1050_CLK_DMA] = imx_clk_hw_gate("dma", "ipg", ccm_base + 0x7C, 6);
+	hws[IMXRT1050_CLK_DMA_MUX] = imx_clk_hw_gate("dmamux0", "ipg", ccm_base + 0x7C, 7);
+	hws[IMXRT1050_CLK_GPT] = imx_clk_hw_fixed_factor("gpt", "osc", 1, 8);
+	imx_check_clk_hws(hws, IMXRT1050_CLK_END);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
+}
+CLK_OF_DECLARE(imxrt_ccm, "fsl,imxrt1050-ccm", imxrt1050_clocks_init);