diff mbox series

[v7,1/2] dt: bindings: add new DT entry for ath11k PCI device support

Message ID 1638789319-2950-1-git-send-email-akolli@codeaurora.org
State New
Headers show
Series [v7,1/2] dt: bindings: add new DT entry for ath11k PCI device support | expand

Commit Message

Anilkumar Kolli Dec. 6, 2021, 11:15 a.m. UTC
Ath11k driver supports PCI devices such as QCN9074/QCA6390.
Ath11k firmware uses host DDR memory, DT entry is used to
reserve host DDR memory regions, send these memory base
addresses using DT entries.

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
---
V4:
  - Fix dt_binding_check warnings (Rob)
V2:
  - Use reserved-memory (Rob)

 .../bindings/net/wireless/qcom,ath11k.yaml         | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Kalle Valo Dec. 9, 2021, 8:04 a.m. UTC | #1
Rob Herring <robh@kernel.org> writes:

> On Mon, 06 Dec 2021 16:45:18 +0530, Anilkumar Kolli wrote:
>> Ath11k driver supports PCI devices such as QCN9074/QCA6390.
>> Ath11k firmware uses host DDR memory, DT entry is used to
>> reserve host DDR memory regions, send these memory base
>> addresses using DT entries.
>> 
>> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
>> ---
>> V4:
>>   - Fix dt_binding_check warnings (Rob)
>> V2:
>>   - Use reserved-memory (Rob)
>> 
>>  .../bindings/net/wireless/qcom,ath11k.yaml         | 30 ++++++++++++++++++++++
>>  1 file changed, 30 insertions(+)
>> 
>
>
> Please add Acked-by/Reviewed-by tags when posting new versions. However,
> there's no need to repost patches *only* to add the tags. The upstream
> maintainer will do that for acks received on the version they apply.
>
> If a tag was not added on purpose, please state why and what changed.

Anil, please clarify. I can add the Rob's Reviewed-by if nothing was
changed since v6.
Kalle Valo Dec. 16, 2021, 3:34 p.m. UTC | #2
Anilkumar Kolli <akolli@codeaurora.org> wrote:

> Ath11k driver supports PCI devices such as QCN9074/QCA6390.
> Ath11k firmware uses host DDR memory, DT entry is used to
> reserve host DDR memory regions, send these memory base
> addresses using DT entries.
> 
> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

2 patches applied to ath-next branch of ath.git, thanks.

77a0a30bb507 dt: bindings: add new DT entry for ath11k PCI device support
6ac04bdc5edb ath11k: Use reserved host DDR addresses from DT for PCI devices
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 85c2f699d602..cdf7b873b419 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -150,6 +150,12 @@  properties:
       string to uniquely identify variant of the calibration data in the
       board-2.bin for designs with colliding bus and device specific ids
 
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
 required:
   - compatible
   - reg
@@ -279,3 +285,27 @@  examples:
                           "tcl2host-status-ring";
         qcom,rproc = <&q6v5_wcss>;
     };
+
+  - |
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qcn9074_0: qcn9074_0@51100000 {
+            no-map;
+            reg = <0x0 0x51100000 0x0 0x03500000>;
+        };
+    };
+
+    pci {
+        pcie0 {
+            #size-cells = <2>;
+            #address-cells = <3>;
+ 
+            wifi_0: wifi@0 {
+                reg = <0 0 0 0 0>;
+                memory-region = <&qcn9074_0>;
+            };
+        };
+    };