diff mbox series

[1/3] usb: aspeed-vhub: add qualifier descriptor

Message ID 20211126110954.2677627-2-neal_liu@aspeedtech.com
State New
Headers show
Series [1/3] usb: aspeed-vhub: add qualifier descriptor | expand

Commit Message

Neal Liu Nov. 26, 2021, 11:09 a.m. UTC 
Support qualifier descriptor to pass USB30CV compliance test.

Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
---
 drivers/usb/gadget/udc/aspeed-vhub/hub.c  | 29 ++++++++++++++++++++---
 drivers/usb/gadget/udc/aspeed-vhub/vhub.h |  2 ++
 2 files changed, 28 insertions(+), 3 deletions(-)

Comments

Neal Liu Nov. 30, 2021, 9:30 a.m. UTC | #1 
> -----Original Message-----
> From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Sent: Tuesday, November 30, 2021 7:41 AM
> To: Neal Liu <neal_liu@aspeedtech.com>; Felipe Balbi <balbi@kernel.org>;
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>; Joel Stanley
> <joel@jms.id.au>; Andrew Jeffery <andrew@aj.id.au>; Cai Huoqing
> <caihuoqing@baidu.com>; Tao Ren <rentao.bupt@gmail.com>; Julia Lawall
> <julia.lawall@inria.fr>; kernel test robot <lkp@intel.com>; Sasha Levin
> <sashal@kernel.org>; linux-usb@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-aspeed@lists.ozlabs.org
> Cc: BMC-SW <BMC-SW@aspeedtech.com>
> Subject: Re: [PATCH 1/3] usb: aspeed-vhub: add qualifier descriptor
> 
> On Fri, 2021-11-26 at 19:09 +0800, Neal Liu wrote:
> >
> > @@ -417,10 +435,9 @@ enum std_req_rc ast_vhub_std_hub_request(struct
> > ast_vhub_ep *ep,
> >
> >  		/* GET/SET_CONFIGURATION */
> >  	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
> > -		return ast_vhub_simple_reply(ep, 1);
> > +		return ast_vhub_simple_reply(ep, vhub->current_config);
> >  	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
> > -		if (wValue != 1)
> > -			return std_req_stall;
> > +		vhub->current_config = wValue;
> >  		return std_req_complete;
> 
> This is odd.. why should we support arbitrary SET_CONFIGURATION for configs
> we don't support ?
> 
> Otherwise looks good.
> 
> Cheers,
> Ben.
> 
This is unnecessary...
I'll remove it in next patch.
Thanks

-Neal
diff mbox series

Patch

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index b9960fdd8a51..d76f83bc7762 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -68,6 +68,18 @@  static const struct usb_device_descriptor ast_vhub_dev_desc = {
 	.bNumConfigurations	= 1,
 };
 
+static const struct usb_qualifier_descriptor ast_vhub_qual_desc = {
+	.bLength = 0xA,
+	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB = cpu_to_le16(0x0200),
+	.bDeviceClass = USB_CLASS_HUB,
+	.bDeviceSubClass = 0,
+	.bDeviceProtocol = 0,
+	.bMaxPacketSize0 = 64,
+	.bNumConfigurations = 1,
+	.bRESERVED = 0,
+};
+
 /*
  * Configuration descriptor: same comments as above
  * regarding handling USB1 mode.
@@ -271,9 +283,11 @@  static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
 		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc));
 		BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
+	case USB_DT_OTHER_SPEED_CONFIG:
 	case USB_DT_CONFIG:
 		dsize = AST_VHUB_CONF_DESC_SIZE;
 		memcpy(ep->buf, &vhub->vhub_conf_desc, dsize);
+		((u8 *)ep->buf)[1] = desc_type;
 		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc));
 		BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
@@ -283,6 +297,10 @@  static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
 		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc));
 		BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
 		break;
+	case USB_DT_DEVICE_QUALIFIER:
+		dsize = sizeof(vhub->vhub_qual_desc);
+		memcpy(ep->buf, &vhub->vhub_qual_desc, dsize);
+		break;
 	default:
 		return std_req_stall;
 	}
@@ -417,10 +435,9 @@  enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
 
 		/* GET/SET_CONFIGURATION */
 	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
-		return ast_vhub_simple_reply(ep, 1);
+		return ast_vhub_simple_reply(ep, vhub->current_config);
 	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
-		if (wValue != 1)
-			return std_req_stall;
+		vhub->current_config = wValue;
 		return std_req_complete;
 
 		/* GET_DESCRIPTOR */
@@ -428,6 +445,8 @@  enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
 		switch (wValue >> 8) {
 		case USB_DT_DEVICE:
 		case USB_DT_CONFIG:
+		case USB_DT_DEVICE_QUALIFIER:
+		case USB_DT_OTHER_SPEED_CONFIG:
 			return ast_vhub_rep_desc(ep, wValue >> 8,
 						 wLength);
 		case USB_DT_STRING:
@@ -1033,6 +1052,10 @@  static int ast_vhub_init_desc(struct ast_vhub *vhub)
 	else
 		ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings);
 
+	/* Initialize vhub Qualifier Descriptor. */
+	memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc,
+		sizeof(vhub->vhub_qual_desc));
+
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 87a5dea12d3c..e6a11a22422a 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -419,12 +419,14 @@  struct ast_vhub {
 
 	/* Upstream bus speed captured at bus reset */
 	unsigned int			speed;
+	u8				current_config;
 
 	/* Standard USB Descriptors of the vhub. */
 	struct usb_device_descriptor	vhub_dev_desc;
 	struct ast_vhub_full_cdesc	vhub_conf_desc;
 	struct usb_hub_descriptor	vhub_hub_desc;
 	struct list_head		vhub_str_desc;
+	struct usb_qualifier_descriptor	vhub_qual_desc;
 };
 
 /* Standard request handlers result codes */