Message ID | 20211001111844.7422-4-masahisa.kojima@linaro.org |
---|---|
State | New |
Headers | show |
Series | Enhance Measured Boot | expand |
On 10/1/21 13:18, Masahisa Kojima wrote: > This commit adds the DeployedMode and AuditMode variable > measurement required in TCG PC Client PFP Spec. > > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> > --- > > Changes in v3: > - read variable first, then mesure the variable > > lib/efi_loader/efi_tcg2.c | 50 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c > index 28e0362bf2..7fba4bc458 100644 > --- a/lib/efi_loader/efi_tcg2.c > +++ b/lib/efi_loader/efi_tcg2.c > @@ -12,6 +12,7 @@ > #include <dm.h> > #include <efi_loader.h> > #include <efi_tcg2.h> > +#include <efi_variable.h> > #include <log.h> > #include <malloc.h> > #include <smbios.h> > @@ -1822,6 +1823,53 @@ out: > return ret; > } > > +/** > + * tcg2_measure_deployed_audit_mode() - measure deployedmode and auditmode > + * > + * @dev: TPM device > + * > + * Return: status code > + */ > +static efi_status_t tcg2_measure_deployed_audit_mode(struct udevice *dev) > +{ > + u8 deployed_mode; > + u8 audit_mode; > + efi_uintn_t size; > + efi_status_t ret; > + u32 pcr_index; > + > + size = sizeof(deployed_mode); > + ret = efi_get_variable_int(L"DeployedMode", &efi_global_variable_guid, > + NULL, &size, &deployed_mode, NULL); > + if (ret != EFI_SUCCESS) > + return ret; > + > + size = sizeof(audit_mode); > + ret = efi_get_variable_int(L"AuditMode", &efi_global_variable_guid, > + NULL, &size, &audit_mode, NULL); > + if (ret != EFI_SUCCESS) > + return ret; > + > + pcr_index = (deployed_mode ? 1 : 7); > + > + ret = tcg2_measure_variable(dev, pcr_index, > + EV_EFI_VARIABLE_DRIVER_CONFIG, > + L"DeployedMode", > + &efi_global_variable_guid, > + size, &deployed_mode); > + if (ret != EFI_SUCCESS) > + return ret; > + > + > + ret = tcg2_measure_variable(dev, pcr_index, > + EV_EFI_VARIABLE_DRIVER_CONFIG, > + L"AuditMode", > + &efi_global_variable_guid, > + size, &audit_mode); > + > + return ret; > +} > + > /** > * tcg2_measure_secure_boot_variable() - measure secure boot variables > * > @@ -1885,6 +1933,8 @@ static efi_status_t tcg2_measure_secure_boot_variable(struct udevice *dev) > free(data); > } > > + ret = tcg2_measure_deployed_audit_mode(dev); You do the same thing four times. A loop is preferable. Best regards Heinrich > + > error: > return ret; > } >
On Sat, 2 Oct 2021 at 01:43, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > > > On 10/1/21 13:18, Masahisa Kojima wrote: > > This commit adds the DeployedMode and AuditMode variable > > measurement required in TCG PC Client PFP Spec. > > > > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> > > --- > > > > Changes in v3: > > - read variable first, then mesure the variable > > > > lib/efi_loader/efi_tcg2.c | 50 +++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 50 insertions(+) > > > > diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c > > index 28e0362bf2..7fba4bc458 100644 > > --- a/lib/efi_loader/efi_tcg2.c > > +++ b/lib/efi_loader/efi_tcg2.c > > @@ -12,6 +12,7 @@ > > #include <dm.h> > > #include <efi_loader.h> > > #include <efi_tcg2.h> > > +#include <efi_variable.h> > > #include <log.h> > > #include <malloc.h> > > #include <smbios.h> > > @@ -1822,6 +1823,53 @@ out: > > return ret; > > } > > > > +/** > > + * tcg2_measure_deployed_audit_mode() - measure deployedmode and auditmode > > + * > > + * @dev: TPM device > > + * > > + * Return: status code > > + */ > > +static efi_status_t tcg2_measure_deployed_audit_mode(struct udevice *dev) > > +{ > > + u8 deployed_mode; > > + u8 audit_mode; > > + efi_uintn_t size; > > + efi_status_t ret; > > + u32 pcr_index; > > + > > + size = sizeof(deployed_mode); > > + ret = efi_get_variable_int(L"DeployedMode", &efi_global_variable_guid, > > + NULL, &size, &deployed_mode, NULL); > > + if (ret != EFI_SUCCESS) > > + return ret; > > + > > + size = sizeof(audit_mode); > > + ret = efi_get_variable_int(L"AuditMode", &efi_global_variable_guid, > > + NULL, &size, &audit_mode, NULL); > > + if (ret != EFI_SUCCESS) > > + return ret; > > + > > + pcr_index = (deployed_mode ? 1 : 7); > > + > > + ret = tcg2_measure_variable(dev, pcr_index, > > + EV_EFI_VARIABLE_DRIVER_CONFIG, > > + L"DeployedMode", > > + &efi_global_variable_guid, > > + size, &deployed_mode); > > + if (ret != EFI_SUCCESS) > > + return ret; > > + > > + > > + ret = tcg2_measure_variable(dev, pcr_index, > > + EV_EFI_VARIABLE_DRIVER_CONFIG, > > + L"AuditMode", > > + &efi_global_variable_guid, > > + size, &audit_mode); > > + > > + return ret; > > +} > > + > > /** > > * tcg2_measure_secure_boot_variable() - measure secure boot variables > > * > > @@ -1885,6 +1933,8 @@ static efi_status_t tcg2_measure_secure_boot_variable(struct udevice *dev) > > free(data); > > } > > > > + ret = tcg2_measure_deployed_audit_mode(dev); > > You do the same thing four times. A loop is preferable. After your series(efi_loader: centralize known vendor GUIDs) is merged, I will update this patch to use loop for the secure variables. Thanks, Masahisa Kojima > > Best regards > > Heinrich > > > + > > error: > > return ret; > > } > >
Hi Heinrich, On Mon, 4 Oct 2021 at 11:30, Masahisa Kojima <masahisa.kojima@linaro.org> wrote: > > On Sat, 2 Oct 2021 at 01:43, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > > > > > > > On 10/1/21 13:18, Masahisa Kojima wrote: > > > This commit adds the DeployedMode and AuditMode variable > > > measurement required in TCG PC Client PFP Spec. > > > > > > Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> > > > --- > > > > > > Changes in v3: > > > - read variable first, then mesure the variable > > > > > > lib/efi_loader/efi_tcg2.c | 50 +++++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 50 insertions(+) > > > > > > diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c > > > index 28e0362bf2..7fba4bc458 100644 > > > --- a/lib/efi_loader/efi_tcg2.c > > > +++ b/lib/efi_loader/efi_tcg2.c > > > @@ -12,6 +12,7 @@ > > > #include <dm.h> > > > #include <efi_loader.h> > > > #include <efi_tcg2.h> > > > +#include <efi_variable.h> > > > #include <log.h> > > > #include <malloc.h> > > > #include <smbios.h> > > > @@ -1822,6 +1823,53 @@ out: > > > return ret; > > > } > > > > > > +/** > > > + * tcg2_measure_deployed_audit_mode() - measure deployedmode and auditmode > > > + * > > > + * @dev: TPM device > > > + * > > > + * Return: status code > > > + */ > > > +static efi_status_t tcg2_measure_deployed_audit_mode(struct udevice *dev) > > > +{ > > > + u8 deployed_mode; > > > + u8 audit_mode; > > > + efi_uintn_t size; > > > + efi_status_t ret; > > > + u32 pcr_index; > > > + > > > + size = sizeof(deployed_mode); > > > + ret = efi_get_variable_int(L"DeployedMode", &efi_global_variable_guid, > > > + NULL, &size, &deployed_mode, NULL); > > > + if (ret != EFI_SUCCESS) > > > + return ret; > > > + > > > + size = sizeof(audit_mode); > > > + ret = efi_get_variable_int(L"AuditMode", &efi_global_variable_guid, > > > + NULL, &size, &audit_mode, NULL); > > > + if (ret != EFI_SUCCESS) > > > + return ret; > > > + > > > + pcr_index = (deployed_mode ? 1 : 7); > > > + > > > + ret = tcg2_measure_variable(dev, pcr_index, > > > + EV_EFI_VARIABLE_DRIVER_CONFIG, > > > + L"DeployedMode", > > > + &efi_global_variable_guid, > > > + size, &deployed_mode); > > > + if (ret != EFI_SUCCESS) > > > + return ret; > > > + > > > + > > > + ret = tcg2_measure_variable(dev, pcr_index, > > > + EV_EFI_VARIABLE_DRIVER_CONFIG, > > > + L"AuditMode", > > > + &efi_global_variable_guid, > > > + size, &audit_mode); > > > + > > > + return ret; > > > +} > > > + > > > /** > > > * tcg2_measure_secure_boot_variable() - measure secure boot variables > > > * > > > @@ -1885,6 +1933,8 @@ static efi_status_t tcg2_measure_secure_boot_variable(struct udevice *dev) > > > free(data); > > > } > > > > > > + ret = tcg2_measure_deployed_audit_mode(dev); > > > > You do the same thing four times. A loop is preferable. > > After your series(efi_loader: centralize known vendor GUIDs) is merged, > I will update this patch to use loop for the secure variables. I was just about to send v4 patch, I noticed that the following patches are removed from efi-2022-01 branch. 5024ec8ea7 efi_loader: simplify tcg2_measure_secure_boot_variable() 1622f0234b efi_loader: simplify efi_sigstore_parse_sigdb() 57d1f4a29e efi_loader: function to get GUID for variable name d326a99318 efi_loader: treat UEFI variable name as const These patches were there at least until last week I think. Do you plan not to merge these patches? Thanks, Masahisa Kojima > > Thanks, > Masahisa Kojima > > > > > Best regards > > > > Heinrich > > > > > + > > > error: > > > return ret; > > > } > > >
diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c index 28e0362bf2..7fba4bc458 100644 --- a/lib/efi_loader/efi_tcg2.c +++ b/lib/efi_loader/efi_tcg2.c @@ -12,6 +12,7 @@ #include <dm.h> #include <efi_loader.h> #include <efi_tcg2.h> +#include <efi_variable.h> #include <log.h> #include <malloc.h> #include <smbios.h> @@ -1822,6 +1823,53 @@ out: return ret; } +/** + * tcg2_measure_deployed_audit_mode() - measure deployedmode and auditmode + * + * @dev: TPM device + * + * Return: status code + */ +static efi_status_t tcg2_measure_deployed_audit_mode(struct udevice *dev) +{ + u8 deployed_mode; + u8 audit_mode; + efi_uintn_t size; + efi_status_t ret; + u32 pcr_index; + + size = sizeof(deployed_mode); + ret = efi_get_variable_int(L"DeployedMode", &efi_global_variable_guid, + NULL, &size, &deployed_mode, NULL); + if (ret != EFI_SUCCESS) + return ret; + + size = sizeof(audit_mode); + ret = efi_get_variable_int(L"AuditMode", &efi_global_variable_guid, + NULL, &size, &audit_mode, NULL); + if (ret != EFI_SUCCESS) + return ret; + + pcr_index = (deployed_mode ? 1 : 7); + + ret = tcg2_measure_variable(dev, pcr_index, + EV_EFI_VARIABLE_DRIVER_CONFIG, + L"DeployedMode", + &efi_global_variable_guid, + size, &deployed_mode); + if (ret != EFI_SUCCESS) + return ret; + + + ret = tcg2_measure_variable(dev, pcr_index, + EV_EFI_VARIABLE_DRIVER_CONFIG, + L"AuditMode", + &efi_global_variable_guid, + size, &audit_mode); + + return ret; +} + /** * tcg2_measure_secure_boot_variable() - measure secure boot variables * @@ -1885,6 +1933,8 @@ static efi_status_t tcg2_measure_secure_boot_variable(struct udevice *dev) free(data); } + ret = tcg2_measure_deployed_audit_mode(dev); + error: return ret; }
This commit adds the DeployedMode and AuditMode variable measurement required in TCG PC Client PFP Spec. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> --- Changes in v3: - read variable first, then mesure the variable lib/efi_loader/efi_tcg2.c | 50 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) -- 2.17.1