| Message ID | 20210602110445.33536-2-krzysztof.kozlowski@canonical.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Wed, 02 Jun 2021, Krzysztof Kozlowski wrote: > From: Krzysztof Kozlowski <krzk@kernel.org> > > Interrupt line can be configured on different hardware in different way, > even inverted. Therefore driver should not enforce specific trigger > type - edge falling - but instead rely on Devicetree to configure it. > > The Maxim 77686 datasheet describes the interrupt line as active low > with a requirement of acknowledge from the CPU therefore the edge > falling is not correct. > > The interrupt line is shared between PMIC and RTC driver, so using level > sensitive interrupt is here especially important to avoid races. With > an edge configuration in case if first PMIC signals interrupt followed > shortly after by the RTC, the interrupt might not be yet cleared/acked > thus the second one would not be noticed. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > Acked-by: Rob Herring <robh@kernel.org> > > --- > > Changes since v1: > 1. Add ack. > --- > Documentation/devicetree/bindings/clock/maxim,max77686.txt | 4 ++-- > Documentation/devicetree/bindings/mfd/max77686.txt | 2 +- > Documentation/devicetree/bindings/regulator/max77686.txt | 2 +- > drivers/mfd/max77686.c | 3 +-- > 4 files changed, 5 insertions(+), 6 deletions(-) Applied, thanks. -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 3472b461ca93..c10849efb444 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -49,7 +49,7 @@ Example: max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; reg = <0x09>; #clock-cells = <1>; @@ -74,7 +74,7 @@ Example: max77802: max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; reg = <0x09>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 42968b7144e0..4447d074894a 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -21,6 +21,6 @@ Example: max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; - interrupts = <26 0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; reg = <0x09>; }; diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt index e9f7578ca09a..ff3d2dec8c4b 100644 --- a/Documentation/devicetree/bindings/regulator/max77686.txt +++ b/Documentation/devicetree/bindings/regulator/max77686.txt @@ -43,7 +43,7 @@ Example: max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; - interrupts = <26 IRQ_TYPE_NONE>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; reg = <0x09>; voltage-regulators { diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index 2ad554b921d9..f9e12ab2bc75 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -209,8 +209,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c) ret = devm_regmap_add_irq_chip(&i2c->dev, max77686->regmap, max77686->irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT | - IRQF_SHARED, 0, irq_chip, + IRQF_ONESHOT | IRQF_SHARED, 0, irq_chip, &max77686->irq_data); if (ret < 0) { dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);