| Message ID | 20210813145302.3933-5-kevin3.tang@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Unisoc's drm kms module | expand |
Hi, On Fri, Aug 13, 2021 at 10:53:00PM +0800, Kevin Tang wrote: > Adds DPU(Display Processor Unit) support for the Unisoc's display > subsystem. > It's support multi planes, scaler, rotation, PQ(Picture Quality) and more. > > v2: > - Use drm_xxx to replace all DRM_XXX. > - Use kzalloc to replace devm_kzalloc for sprd_dpu structure init. > > v3: > - Remove dpu_layer stuff layer and commit layers by aotmic_update > > v4: > - Use drmm_helpers to allocate crtc and planes. > - Move rotation enum definitions to crtc layer reg bitfields. > - Move allocate crtc and planes to bind function. > > v5: > - Fix the checkpatch warnings. > - Use mode_set_nofb instead of mode_valid callback. > - Follow the OF-Graph bindings, use of_graph_get_port_by_id > instead of of_parse_phandle. > - Use zpos to represent the layer position. > - Rebase to last drm misc branch. > > v6: > - Disable and clear interrupts before register dpu IRQ > - Init dpi config used by crtc_state->adjusted_mode on mode_set_nofb > - Remove enable_irq and disable_irq function call. > - Remove drm_format_info function call. > > Cc: Orson Zhai <orsonzhai@gmail.com> > Cc: Chunyan Zhang <zhang.lyra@gmail.com> > Signed-off-by: Kevin Tang <kevin.tang@unisoc.com> > --- > drivers/gpu/drm/sprd/Kconfig | 1 + > drivers/gpu/drm/sprd/Makefile | 3 +- > drivers/gpu/drm/sprd/sprd_dpu.c | 937 ++++++++++++++++++++++++++++++++ > drivers/gpu/drm/sprd/sprd_dpu.h | 109 ++++ > drivers/gpu/drm/sprd/sprd_drm.c | 1 + > drivers/gpu/drm/sprd/sprd_drm.h | 2 + > 6 files changed, 1052 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c > create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h > > diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig > index 726c3e76d..37762c333 100644 > --- a/drivers/gpu/drm/sprd/Kconfig > +++ b/drivers/gpu/drm/sprd/Kconfig > @@ -5,6 +5,7 @@ config DRM_SPRD > select DRM_GEM_CMA_HELPER > select DRM_KMS_CMA_HELPER > select DRM_KMS_HELPER > + select VIDEOMODE_HELPERS > help > Choose this option if you have a Unisoc chipset. > If M is selected the module will be called sprd_drm. > diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile > index 9850f00b8..ab12b95e6 100644 > --- a/drivers/gpu/drm/sprd/Makefile > +++ b/drivers/gpu/drm/sprd/Makefile > @@ -1,3 +1,4 @@ > # SPDX-License-Identifier: GPL-2.0 > > -obj-y := sprd_drm.o > +obj-y := sprd_drm.o \ > + sprd_dpu.o > diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c > new file mode 100644 > index 000000000..448dd4fb6 > --- /dev/null > +++ b/drivers/gpu/drm/sprd/sprd_dpu.c > @@ -0,0 +1,937 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2020 Unisoc Inc. > + */ > + > +#include <linux/component.h> > +#include <linux/delay.h> > +#include <linux/dma-buf.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_device.h> > +#include <linux/of_graph.h> > +#include <linux/of_irq.h> > +#include <linux/wait.h> > +#include <linux/workqueue.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_fb_cma_helper.h> > +#include <drm/drm_gem_cma_helper.h> > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_plane_helper.h> > + > +#include "sprd_drm.h" > +#include "sprd_dpu.h" > + > +/* Global control registers */ > +#define REG_DPU_CTRL 0x04 > +#define REG_DPU_CFG0 0x08 > +#define REG_PANEL_SIZE 0x20 > +#define REG_BLEND_SIZE 0x24 > +#define REG_BG_COLOR 0x2C > + > +/* Layer0 control registers */ > +#define REG_LAY_BASE_ADDR0 0x30 > +#define REG_LAY_BASE_ADDR1 0x34 > +#define REG_LAY_BASE_ADDR2 0x38 > +#define REG_LAY_CTRL 0x40 > +#define REG_LAY_SIZE 0x44 > +#define REG_LAY_PITCH 0x48 > +#define REG_LAY_POS 0x4C > +#define REG_LAY_ALPHA 0x50 > +#define REG_LAY_CROP_START 0x5C > + > +/* Interrupt control registers */ > +#define REG_DPU_INT_EN 0x1E0 > +#define REG_DPU_INT_CLR 0x1E4 > +#define REG_DPU_INT_STS 0x1E8 > + > +/* DPI control registers */ > +#define REG_DPI_CTRL 0x1F0 > +#define REG_DPI_H_TIMING 0x1F4 > +#define REG_DPI_V_TIMING 0x1F8 > + > +/* MMU control registers */ > +#define REG_MMU_EN 0x800 > +#define REG_MMU_VPN_RANGE 0x80C > +#define REG_MMU_VAOR_ADDR_RD 0x818 > +#define REG_MMU_VAOR_ADDR_WR 0x81C > +#define REG_MMU_INV_ADDR_RD 0x820 > +#define REG_MMU_INV_ADDR_WR 0x824 > +#define REG_MMU_PPN1 0x83C > +#define REG_MMU_RANGE1 0x840 > +#define REG_MMU_PPN2 0x844 > +#define REG_MMU_RANGE2 0x848 > + > +/* Global control bits */ > +#define BIT_DPU_RUN BIT(0) > +#define BIT_DPU_STOP BIT(1) > +#define BIT_DPU_REG_UPDATE BIT(2) > +#define BIT_DPU_IF_EDPI BIT(0) > + > +/* Layer control bits */ > +#define BIT_DPU_LAY_EN BIT(0) > +#define BIT_DPU_LAY_LAYER_ALPHA (0x01 << 2) > +#define BIT_DPU_LAY_COMBO_ALPHA (0x02 << 2) > +#define BIT_DPU_LAY_FORMAT_YUV422_2PLANE (0x00 << 4) > +#define BIT_DPU_LAY_FORMAT_YUV420_2PLANE (0x01 << 4) > +#define BIT_DPU_LAY_FORMAT_YUV420_3PLANE (0x02 << 4) > +#define BIT_DPU_LAY_FORMAT_ARGB8888 (0x03 << 4) > +#define BIT_DPU_LAY_FORMAT_RGB565 (0x04 << 4) > +#define BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3 (0x00 << 8) > +#define BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0 (0x01 << 8) > +#define BIT_DPU_LAY_NO_SWITCH (0x00 << 10) > +#define BIT_DPU_LAY_RB_OR_UV_SWITCH (0x01 << 10) > +#define BIT_DPU_LAY_MODE_BLEND_NORMAL (0x00 << 16) > +#define BIT_DPU_LAY_MODE_BLEND_PREMULT (0x01 << 16) > +#define BIT_DPU_LAY_ROTATION_0 (0x00 << 20) > +#define BIT_DPU_LAY_ROTATION_90 (0x01 << 20) > +#define BIT_DPU_LAY_ROTATION_180 (0x02 << 20) > +#define BIT_DPU_LAY_ROTATION_270 (0x03 << 20) > +#define BIT_DPU_LAY_ROTATION_0_M (0x04 << 20) > +#define BIT_DPU_LAY_ROTATION_90_M (0x05 << 20) > +#define BIT_DPU_LAY_ROTATION_180_M (0x06 << 20) > +#define BIT_DPU_LAY_ROTATION_270_M (0x07 << 20) > + > +/* Interrupt control & status bits */ > +#define BIT_DPU_INT_DONE BIT(0) > +#define BIT_DPU_INT_TE BIT(1) > +#define BIT_DPU_INT_ERR BIT(2) > +#define BIT_DPU_INT_UPDATE_DONE BIT(4) > +#define BIT_DPU_INT_VSYNC BIT(5) > +#define BIT_DPU_INT_MMU_VAOR_RD BIT(16) > +#define BIT_DPU_INT_MMU_VAOR_WR BIT(17) > +#define BIT_DPU_INT_MMU_INV_RD BIT(18) > +#define BIT_DPU_INT_MMU_INV_WR BIT(19) > + > +/* DPI control bits */ > +#define BIT_DPU_EDPI_TE_EN BIT(8) > +#define BIT_DPU_EDPI_FROM_EXTERNAL_PAD BIT(10) > +#define BIT_DPU_DPI_HALT_EN BIT(16) > + > +static const u32 layer_fmts[] = { > + DRM_FORMAT_XRGB8888, > + DRM_FORMAT_XBGR8888, > + DRM_FORMAT_ARGB8888, > + DRM_FORMAT_ABGR8888, > + DRM_FORMAT_RGBA8888, > + DRM_FORMAT_BGRA8888, > + DRM_FORMAT_RGBX8888, > + DRM_FORMAT_RGB565, > + DRM_FORMAT_BGR565, > + DRM_FORMAT_NV12, > + DRM_FORMAT_NV21, > + DRM_FORMAT_NV16, > + DRM_FORMAT_NV61, > + DRM_FORMAT_YUV420, > + DRM_FORMAT_YVU420, > +}; > + > +struct sprd_plane { > + struct drm_plane base; > +}; > + > +static u32 check_mmu_isr(struct sprd_dpu *dpu, u32 reg_val) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + u32 mmu_mask = BIT_DPU_INT_MMU_VAOR_RD | > + BIT_DPU_INT_MMU_VAOR_WR | > + BIT_DPU_INT_MMU_INV_RD | > + BIT_DPU_INT_MMU_INV_WR; > + u32 val = reg_val & mmu_mask; > + int i; > + > + if (val) { > + drm_err(dpu->drm, "--- iommu interrupt err: 0x%04x ---\n", val); > + > + if (val & BIT_DPU_INT_MMU_INV_RD) > + drm_err(dpu->drm, "iommu invalid read error, addr: 0x%08x\n", > + readl(ctx->base + REG_MMU_INV_ADDR_RD)); > + if (val & BIT_DPU_INT_MMU_INV_WR) > + drm_err(dpu->drm, "iommu invalid write error, addr: 0x%08x\n", > + readl(ctx->base + REG_MMU_INV_ADDR_WR)); > + if (val & BIT_DPU_INT_MMU_VAOR_RD) > + drm_err(dpu->drm, "iommu va out of range read error, addr: 0x%08x\n", > + readl(ctx->base + REG_MMU_VAOR_ADDR_RD)); > + if (val & BIT_DPU_INT_MMU_VAOR_WR) > + drm_err(dpu->drm, "iommu va out of range write error, addr: 0x%08x\n", > + readl(ctx->base + REG_MMU_VAOR_ADDR_WR)); > + > + for (i = 0; i < 8; i++) { > + reg_val = layer_reg_rd(ctx, REG_LAY_CTRL, i); > + if (reg_val & 0x1) > + drm_info(dpu->drm, "layer%d: 0x%x 0x%x 0x%x ctrl: 0x%x\n", i, > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR0, i), > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR1, i), > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR2, i), > + layer_reg_rd(ctx, REG_LAY_CTRL, i)); > + } > + } > + > + return val; > +} We'll still want an Acked-by from one of the IOMMU maintainers. Last time they commented they were against that. > +static int dpu_wait_stop_done(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + int rc; > + > + if (ctx->stopped) > + return 0; > + > + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_stop, > + msecs_to_jiffies(500)); > + ctx->evt_stop = false; > + > + ctx->stopped = true; > + > + if (!rc) { > + drm_err(dpu->drm, "dpu wait for stop done time out!\n"); > + return -ETIMEDOUT; > + } > + > + return 0; > +} > + > +static int dpu_wait_update_done(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + int rc; > + > + ctx->evt_update = false; > + > + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_update, > + msecs_to_jiffies(500)); > + > + if (!rc) { > + drm_err(dpu->drm, "dpu wait for reg update done time out!\n"); > + return -ETIMEDOUT; > + } > + > + return 0; > +} > + > +static u32 drm_format_to_dpu(struct drm_framebuffer *fb) > +{ > + u32 format = 0; > + > + switch (fb->format->format) { > + case DRM_FORMAT_BGRA8888: > + /* BGRA8888 -> ARGB8888 */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; > + format |= BIT_DPU_LAY_FORMAT_ARGB8888; > + break; > + case DRM_FORMAT_RGBX8888: > + case DRM_FORMAT_RGBA8888: > + /* RGBA8888 -> ABGR8888 */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; > + fallthrough; > + case DRM_FORMAT_ABGR8888: > + /* RB switch */ > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > + fallthrough; > + case DRM_FORMAT_ARGB8888: > + format |= BIT_DPU_LAY_FORMAT_ARGB8888; > + break; > + case DRM_FORMAT_XBGR8888: > + /* RB switch */ > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > + fallthrough; > + case DRM_FORMAT_XRGB8888: > + format |= BIT_DPU_LAY_FORMAT_ARGB8888; > + break; > + case DRM_FORMAT_BGR565: > + /* RB switch */ > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > + fallthrough; > + case DRM_FORMAT_RGB565: > + format |= BIT_DPU_LAY_FORMAT_RGB565; > + break; > + case DRM_FORMAT_NV12: > + /* 2-Lane: Yuv420 */ > + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE; > + /* Y endian */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > + /* UV endian */ > + format |= BIT_DPU_LAY_NO_SWITCH; > + break; > + case DRM_FORMAT_NV21: > + /* 2-Lane: Yuv420 */ > + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE; > + /* Y endian */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > + /* UV endian */ > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > + break; > + case DRM_FORMAT_NV16: > + /* 2-Lane: Yuv422 */ > + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE; > + /* Y endian */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; > + /* UV endian */ > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > + break; > + case DRM_FORMAT_NV61: > + /* 2-Lane: Yuv422 */ > + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE; > + /* Y endian */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > + /* UV endian */ > + format |= BIT_DPU_LAY_NO_SWITCH; > + break; > + case DRM_FORMAT_YUV420: > + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE; > + /* Y endian */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > + /* UV endian */ > + format |= BIT_DPU_LAY_NO_SWITCH; > + break; > + case DRM_FORMAT_YVU420: > + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE; > + /* Y endian */ > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > + /* UV endian */ > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > + break; > + default: > + break; > + } > + > + return format; > +} > + > +static u32 drm_rotation_to_dpu(struct drm_plane_state *state) > +{ > + u32 rotation = 0; > + > + switch (state->rotation) { > + default: > + case DRM_MODE_ROTATE_0: > + rotation = BIT_DPU_LAY_ROTATION_0; > + break; > + case DRM_MODE_ROTATE_90: > + rotation = BIT_DPU_LAY_ROTATION_90; > + break; > + case DRM_MODE_ROTATE_180: > + rotation = BIT_DPU_LAY_ROTATION_180; > + break; > + case DRM_MODE_ROTATE_270: > + rotation = BIT_DPU_LAY_ROTATION_270; > + break; > + case DRM_MODE_REFLECT_Y: > + rotation = BIT_DPU_LAY_ROTATION_180_M; > + break; > + case (DRM_MODE_REFLECT_Y | DRM_MODE_ROTATE_90): > + rotation = BIT_DPU_LAY_ROTATION_90_M; > + break; > + case DRM_MODE_REFLECT_X: > + rotation = BIT_DPU_LAY_ROTATION_0_M; > + break; > + case (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90): > + rotation = BIT_DPU_LAY_ROTATION_270_M; > + break; > + } > + > + return rotation; > +} > + > +static u32 drm_blend_to_dpu(struct drm_plane_state *state) > +{ > + u32 blend = 0; > + > + switch (state->pixel_blend_mode) { > + case DRM_MODE_BLEND_COVERAGE: > + /* alpha mode select - combo alpha */ > + blend |= BIT_DPU_LAY_COMBO_ALPHA; > + /* Normal mode */ > + blend |= BIT_DPU_LAY_MODE_BLEND_NORMAL; > + break; > + case DRM_MODE_BLEND_PREMULTI: > + /* alpha mode select - combo alpha */ > + blend |= BIT_DPU_LAY_COMBO_ALPHA; > + /* Pre-mult mode */ > + blend |= BIT_DPU_LAY_MODE_BLEND_PREMULT; > + break; > + case DRM_MODE_BLEND_PIXEL_NONE: > + default: > + /* don't do blending, maybe RGBX */ > + /* alpha mode select - layer alpha */ > + blend |= BIT_DPU_LAY_LAYER_ALPHA; > + break; > + } > + > + return blend; > +} > + > +static void sprd_dpu_layer(struct sprd_dpu *dpu, struct drm_plane_state *state) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + struct drm_gem_cma_object *cma_obj; > + struct drm_framebuffer *fb = state->fb; > + u32 addr, size, offset, pitch, blend, format, rotation; > + u32 src_x = state->src_x >> 16; > + u32 src_y = state->src_y >> 16; > + u32 src_w = state->src_w >> 16; > + u32 src_h = state->src_h >> 16; > + u32 dst_x = state->crtc_x; > + u32 dst_y = state->crtc_y; > + u32 alpha = state->alpha; > + u32 index = state->zpos; > + int i; > + > + offset = (dst_x & 0xffff) | (dst_y << 16); > + size = (src_w & 0xffff) | (src_h << 16); > + > + for (i = 0; i < fb->format->num_planes; i++) { > + cma_obj = drm_fb_cma_get_gem_obj(fb, i); > + addr = cma_obj->paddr + fb->offsets[i]; > + > + if (i == 0) > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR0, addr, index); > + else if (i == 1) > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR1, addr, index); > + else > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR2, addr, index); > + } > + > + if (fb->format->num_planes == 3) { > + /* UV pitch is 1/2 of Y pitch */ > + pitch = (fb->pitches[0] / fb->format->cpp[0]) | > + (fb->pitches[0] / fb->format->cpp[0] << 15); > + } else { > + pitch = fb->pitches[0] / fb->format->cpp[0]; > + } > + > + layer_reg_wr(ctx, REG_LAY_POS, offset, index); > + layer_reg_wr(ctx, REG_LAY_SIZE, size, index); > + layer_reg_wr(ctx, REG_LAY_CROP_START, > + src_y << 16 | src_x, index); > + layer_reg_wr(ctx, REG_LAY_ALPHA, alpha, index); > + layer_reg_wr(ctx, REG_LAY_PITCH, pitch, index); > + > + format = drm_format_to_dpu(fb); > + blend = drm_blend_to_dpu(state); > + rotation = drm_rotation_to_dpu(state); > + > + layer_reg_wr(ctx, REG_LAY_CTRL, BIT_DPU_LAY_EN | > + format | > + blend | > + rotation, > + index); > +} > + > +static void sprd_dpu_flip(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + u32 reg_val; > + > + /* > + * Make sure the dpu is in stop status. DPU has no shadow > + * registers in EDPI mode. So the config registers can only be > + * updated in the rising edge of DPU_RUN bit. > + */ > + if (ctx->if_type == SPRD_DPU_IF_EDPI) > + dpu_wait_stop_done(dpu); > + > + /* update trigger and wait */ > + if (ctx->if_type == SPRD_DPU_IF_DPI) { > + if (!ctx->stopped) { > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_REG_UPDATE); > + dpu_wait_update_done(dpu); > + } > + > + dpu_reg_set(ctx, REG_DPU_INT_EN, BIT_DPU_INT_ERR); > + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) { > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN); > + > + ctx->stopped = false; > + } > + > + /* > + * If the following interrupt was disabled in isr, > + * re-enable it. > + */ > + reg_val = BIT_DPU_INT_MMU_VAOR_RD | > + BIT_DPU_INT_MMU_VAOR_WR | > + BIT_DPU_INT_MMU_INV_RD | > + BIT_DPU_INT_MMU_INV_WR; > + dpu_reg_set(ctx, REG_DPU_INT_EN, reg_val); > +} > + > +static void sprd_dpu_init(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + u32 int_mask = 0; > + > + writel(0x00, ctx->base + REG_BG_COLOR); > + writel(0x00, ctx->base + REG_MMU_EN); > + writel(0x00, ctx->base + REG_MMU_PPN1); > + writel(0xffff, ctx->base + REG_MMU_RANGE1); > + writel(0x00, ctx->base + REG_MMU_PPN2); > + writel(0xffff, ctx->base + REG_MMU_RANGE2); > + writel(0x1ffff, ctx->base + REG_MMU_VPN_RANGE); > + > + if (ctx->if_type == SPRD_DPU_IF_DPI) { > + /* use dpi as interface */ > + dpu_reg_clr(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI); > + /* disable Halt function for SPRD DSI */ > + dpu_reg_clr(ctx, REG_DPI_CTRL, BIT_DPU_DPI_HALT_EN); > + /* select te from external pad */ > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD); > + > + /* enable dpu update done INT */ > + int_mask |= BIT_DPU_INT_UPDATE_DONE; > + /* enable dpu done INT */ > + int_mask |= BIT_DPU_INT_DONE; > + /* enable dpu dpi vsync */ > + int_mask |= BIT_DPU_INT_VSYNC; > + /* enable dpu TE INT */ > + int_mask |= BIT_DPU_INT_TE; > + /* enable underflow err INT */ > + int_mask |= BIT_DPU_INT_ERR; > + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) { > + /* use edpi as interface */ > + dpu_reg_set(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI); > + /* use external te */ > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD); > + /* enable te */ > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_TE_EN); > + > + /* enable stop done INT */ > + int_mask |= BIT_DPU_INT_DONE; > + /* enable TE INT */ > + int_mask |= BIT_DPU_INT_TE; > + } > + > + /* enable iommu va out of range read error INT */ > + int_mask |= BIT_DPU_INT_MMU_VAOR_RD; > + /* enable iommu va out of range write error INT */ > + int_mask |= BIT_DPU_INT_MMU_VAOR_WR; > + /* enable iommu invalid read error INT */ > + int_mask |= BIT_DPU_INT_MMU_INV_RD; > + /* enable iommu invalid write error INT */ > + int_mask |= BIT_DPU_INT_MMU_INV_WR; > + > + writel(int_mask, ctx->base + REG_DPU_INT_EN); > +} > + > +static void sprd_dpu_fini(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + > + writel(0x00, ctx->base + REG_DPU_INT_EN); > + writel(0xff, ctx->base + REG_DPU_INT_CLR); > +} > + > +static void sprd_dpi_init(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + u32 reg_val; > + u32 size; > + > + size = (ctx->vm.vactive << 16) | ctx->vm.hactive; > + writel(size, ctx->base + REG_PANEL_SIZE); > + writel(size, ctx->base + REG_BLEND_SIZE); > + > + if (ctx->if_type == SPRD_DPU_IF_DPI) { > + /* set dpi timing */ > + reg_val = ctx->vm.hsync_len << 0 | > + ctx->vm.hback_porch << 8 | > + ctx->vm.hfront_porch << 20; > + writel(reg_val, ctx->base + REG_DPI_H_TIMING); > + > + reg_val = ctx->vm.vsync_len << 0 | > + ctx->vm.vback_porch << 8 | > + ctx->vm.vfront_porch << 20; > + writel(reg_val, ctx->base + REG_DPI_V_TIMING); > + } > +} > + > +void sprd_dpu_run(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN); > + > + ctx->stopped = false; > +} > + > +void sprd_dpu_stop(struct sprd_dpu *dpu) > +{ > + struct dpu_context *ctx = &dpu->ctx; > + > + if (ctx->if_type == SPRD_DPU_IF_DPI) > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_STOP); > + > + dpu_wait_stop_done(dpu); > +} > + > +static int sprd_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct drm_crtc_state *crtc_state; > + u32 fmt; > + > + if (!plane_state->fb || !plane_state->crtc) > + return 0; > + > + fmt = drm_format_to_dpu(plane_state->fb); > + if (!fmt) > + return -EINVAL; > + > + crtc_state = drm_atomic_get_crtc_state(plane_state->state, plane_state->crtc); > + if (IS_ERR(crtc_state)) > + return PTR_ERR(crtc_state); > + > + return drm_atomic_helper_check_plane_state(plane_state, crtc_state, > + DRM_PLANE_HELPER_NO_SCALING, > + DRM_PLANE_HELPER_NO_SCALING, > + true, true); > +} > + > +static void sprd_plane_atomic_update(struct drm_plane *drm_plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, > + drm_plane); > + struct sprd_dpu *dpu = to_sprd_crtc(new_state->crtc); > + > + /* start configure dpu layers */ > + sprd_dpu_layer(dpu, new_state); > +} > + > +static void sprd_plane_atomic_disable(struct drm_plane *drm_plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, > + drm_plane); > + struct sprd_dpu *dpu = to_sprd_crtc(old_state->crtc); > + > + layer_reg_wr(&dpu->ctx, REG_LAY_CTRL, 0x00, old_state->zpos); > +} > + > +static void sprd_plane_create_properties(struct sprd_plane *plane, int index) > +{ > + unsigned int supported_modes = BIT(DRM_MODE_BLEND_PIXEL_NONE) | > + BIT(DRM_MODE_BLEND_PREMULTI) | > + BIT(DRM_MODE_BLEND_COVERAGE); > + > + /* create rotation property */ > + drm_plane_create_rotation_property(&plane->base, > + DRM_MODE_ROTATE_0, > + DRM_MODE_ROTATE_MASK | > + DRM_MODE_REFLECT_MASK); > + > + /* create alpha property */ > + drm_plane_create_alpha_property(&plane->base); > + > + /* create blend mode property */ > + drm_plane_create_blend_mode_property(&plane->base, supported_modes); > + > + /* create zpos property */ > + drm_plane_create_zpos_immutable_property(&plane->base, index); > +} > + > +static const struct drm_plane_helper_funcs sprd_plane_helper_funcs = { > + .atomic_check = sprd_plane_atomic_check, > + .atomic_update = sprd_plane_atomic_update, > + .atomic_disable = sprd_plane_atomic_disable, > +}; > + > +static const struct drm_plane_funcs sprd_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > +}; > + > +static struct sprd_plane *sprd_planes_init(struct drm_device *drm) > +{ > + struct sprd_plane *plane, *primary; > + enum drm_plane_type plane_type; > + int i; > + > + for (i = 0; i < 6; i++) { > + plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : > + DRM_PLANE_TYPE_OVERLAY; > + > + plane = drmm_universal_plane_alloc(drm, struct sprd_plane, base, > + 1, &sprd_plane_funcs, > + layer_fmts, ARRAY_SIZE(layer_fmts), > + NULL, plane_type, NULL); > + if (IS_ERR(plane)) { > + drm_err(drm, "failed to init drm plane: %d\n", i); > + return plane; > + } > + > + drm_plane_helper_add(&plane->base, &sprd_plane_helper_funcs); > + > + sprd_plane_create_properties(plane, i); > + > + if (i == 0) > + primary = plane; > + } > + > + return primary; > +} > + > +static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc) > +{ > + struct sprd_dpu *dpu = to_sprd_crtc(crtc); > + struct drm_display_mode *mode = &crtc->state->adjusted_mode; > + > + drm_display_mode_to_videomode(mode, &dpu->ctx.vm); You don't need to store the videomode into you dpu structure, just pass adjusted_mode to sprd_dpi_init. > + sprd_dpi_init(dpu); > +} > + > +static void sprd_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > +{ > + struct sprd_dpu *dpu = to_sprd_crtc(crtc); > + > + sprd_dpu_init(dpu); Do you need to do it on both mode_set_nofb and atomic_enable? Maxime
Maxime Ripard <maxime@cerno.tech> 于2021年9月17日周五 下午10:58写道： > > Hi, > > On Fri, Aug 13, 2021 at 10:53:00PM +0800, Kevin Tang wrote: > > Adds DPU(Display Processor Unit) support for the Unisoc's display > > subsystem. > > It's support multi planes, scaler, rotation, PQ(Picture Quality) and more. > > > > v2: > > - Use drm_xxx to replace all DRM_XXX. > > - Use kzalloc to replace devm_kzalloc for sprd_dpu structure init. > > > > v3: > > - Remove dpu_layer stuff layer and commit layers by aotmic_update > > > > v4: > > - Use drmm_helpers to allocate crtc and planes. > > - Move rotation enum definitions to crtc layer reg bitfields. > > - Move allocate crtc and planes to bind function. > > > > v5: > > - Fix the checkpatch warnings. > > - Use mode_set_nofb instead of mode_valid callback. > > - Follow the OF-Graph bindings, use of_graph_get_port_by_id > > instead of of_parse_phandle. > > - Use zpos to represent the layer position. > > - Rebase to last drm misc branch. > > > > v6: > > - Disable and clear interrupts before register dpu IRQ > > - Init dpi config used by crtc_state->adjusted_mode on mode_set_nofb > > - Remove enable_irq and disable_irq function call. > > - Remove drm_format_info function call. > > > > Cc: Orson Zhai <orsonzhai@gmail.com> > > Cc: Chunyan Zhang <zhang.lyra@gmail.com> > > Signed-off-by: Kevin Tang <kevin.tang@unisoc.com> > > --- > > drivers/gpu/drm/sprd/Kconfig | 1 + > > drivers/gpu/drm/sprd/Makefile | 3 +- > > drivers/gpu/drm/sprd/sprd_dpu.c | 937 ++++++++++++++++++++++++++++++++ > > drivers/gpu/drm/sprd/sprd_dpu.h | 109 ++++ > > drivers/gpu/drm/sprd/sprd_drm.c | 1 + > > drivers/gpu/drm/sprd/sprd_drm.h | 2 + > > 6 files changed, 1052 insertions(+), 1 deletion(-) > > create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c > > create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h > > > > diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig > > index 726c3e76d..37762c333 100644 > > --- a/drivers/gpu/drm/sprd/Kconfig > > +++ b/drivers/gpu/drm/sprd/Kconfig > > @@ -5,6 +5,7 @@ config DRM_SPRD > > select DRM_GEM_CMA_HELPER > > select DRM_KMS_CMA_HELPER > > select DRM_KMS_HELPER > > + select VIDEOMODE_HELPERS > > help > > Choose this option if you have a Unisoc chipset. > > If M is selected the module will be called sprd_drm. > > diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile > > index 9850f00b8..ab12b95e6 100644 > > --- a/drivers/gpu/drm/sprd/Makefile > > +++ b/drivers/gpu/drm/sprd/Makefile > > @@ -1,3 +1,4 @@ > > # SPDX-License-Identifier: GPL-2.0 > > > > -obj-y := sprd_drm.o > > +obj-y := sprd_drm.o \ > > + sprd_dpu.o > > diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c > > new file mode 100644 > > index 000000000..448dd4fb6 > > --- /dev/null > > +++ b/drivers/gpu/drm/sprd/sprd_dpu.c > > @@ -0,0 +1,937 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2020 Unisoc Inc. > > + */ > > + > > +#include <linux/component.h> > > +#include <linux/delay.h> > > +#include <linux/dma-buf.h> > > +#include <linux/io.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/of_device.h> > > +#include <linux/of_graph.h> > > +#include <linux/of_irq.h> > > +#include <linux/wait.h> > > +#include <linux/workqueue.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_fb_cma_helper.h> > > +#include <drm/drm_gem_cma_helper.h> > > +#include <drm/drm_gem_framebuffer_helper.h> > > +#include <drm/drm_plane_helper.h> > > + > > +#include "sprd_drm.h" > > +#include "sprd_dpu.h" > > + > > +/* Global control registers */ > > +#define REG_DPU_CTRL 0x04 > > +#define REG_DPU_CFG0 0x08 > > +#define REG_PANEL_SIZE 0x20 > > +#define REG_BLEND_SIZE 0x24 > > +#define REG_BG_COLOR 0x2C > > + > > +/* Layer0 control registers */ > > +#define REG_LAY_BASE_ADDR0 0x30 > > +#define REG_LAY_BASE_ADDR1 0x34 > > +#define REG_LAY_BASE_ADDR2 0x38 > > +#define REG_LAY_CTRL 0x40 > > +#define REG_LAY_SIZE 0x44 > > +#define REG_LAY_PITCH 0x48 > > +#define REG_LAY_POS 0x4C > > +#define REG_LAY_ALPHA 0x50 > > +#define REG_LAY_CROP_START 0x5C > > + > > +/* Interrupt control registers */ > > +#define REG_DPU_INT_EN 0x1E0 > > +#define REG_DPU_INT_CLR 0x1E4 > > +#define REG_DPU_INT_STS 0x1E8 > > + > > +/* DPI control registers */ > > +#define REG_DPI_CTRL 0x1F0 > > +#define REG_DPI_H_TIMING 0x1F4 > > +#define REG_DPI_V_TIMING 0x1F8 > > + > > +/* MMU control registers */ > > +#define REG_MMU_EN 0x800 > > +#define REG_MMU_VPN_RANGE 0x80C > > +#define REG_MMU_VAOR_ADDR_RD 0x818 > > +#define REG_MMU_VAOR_ADDR_WR 0x81C > > +#define REG_MMU_INV_ADDR_RD 0x820 > > +#define REG_MMU_INV_ADDR_WR 0x824 > > +#define REG_MMU_PPN1 0x83C > > +#define REG_MMU_RANGE1 0x840 > > +#define REG_MMU_PPN2 0x844 > > +#define REG_MMU_RANGE2 0x848 > > + > > +/* Global control bits */ > > +#define BIT_DPU_RUN BIT(0) > > +#define BIT_DPU_STOP BIT(1) > > +#define BIT_DPU_REG_UPDATE BIT(2) > > +#define BIT_DPU_IF_EDPI BIT(0) > > + > > +/* Layer control bits */ > > +#define BIT_DPU_LAY_EN BIT(0) > > +#define BIT_DPU_LAY_LAYER_ALPHA (0x01 << 2) > > +#define BIT_DPU_LAY_COMBO_ALPHA (0x02 << 2) > > +#define BIT_DPU_LAY_FORMAT_YUV422_2PLANE (0x00 << 4) > > +#define BIT_DPU_LAY_FORMAT_YUV420_2PLANE (0x01 << 4) > > +#define BIT_DPU_LAY_FORMAT_YUV420_3PLANE (0x02 << 4) > > +#define BIT_DPU_LAY_FORMAT_ARGB8888 (0x03 << 4) > > +#define BIT_DPU_LAY_FORMAT_RGB565 (0x04 << 4) > > +#define BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3 (0x00 << 8) > > +#define BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0 (0x01 << 8) > > +#define BIT_DPU_LAY_NO_SWITCH (0x00 << 10) > > +#define BIT_DPU_LAY_RB_OR_UV_SWITCH (0x01 << 10) > > +#define BIT_DPU_LAY_MODE_BLEND_NORMAL (0x00 << 16) > > +#define BIT_DPU_LAY_MODE_BLEND_PREMULT (0x01 << 16) > > +#define BIT_DPU_LAY_ROTATION_0 (0x00 << 20) > > +#define BIT_DPU_LAY_ROTATION_90 (0x01 << 20) > > +#define BIT_DPU_LAY_ROTATION_180 (0x02 << 20) > > +#define BIT_DPU_LAY_ROTATION_270 (0x03 << 20) > > +#define BIT_DPU_LAY_ROTATION_0_M (0x04 << 20) > > +#define BIT_DPU_LAY_ROTATION_90_M (0x05 << 20) > > +#define BIT_DPU_LAY_ROTATION_180_M (0x06 << 20) > > +#define BIT_DPU_LAY_ROTATION_270_M (0x07 << 20) > > + > > +/* Interrupt control & status bits */ > > +#define BIT_DPU_INT_DONE BIT(0) > > +#define BIT_DPU_INT_TE BIT(1) > > +#define BIT_DPU_INT_ERR BIT(2) > > +#define BIT_DPU_INT_UPDATE_DONE BIT(4) > > +#define BIT_DPU_INT_VSYNC BIT(5) > > +#define BIT_DPU_INT_MMU_VAOR_RD BIT(16) > > +#define BIT_DPU_INT_MMU_VAOR_WR BIT(17) > > +#define BIT_DPU_INT_MMU_INV_RD BIT(18) > > +#define BIT_DPU_INT_MMU_INV_WR BIT(19) > > + > > +/* DPI control bits */ > > +#define BIT_DPU_EDPI_TE_EN BIT(8) > > +#define BIT_DPU_EDPI_FROM_EXTERNAL_PAD BIT(10) > > +#define BIT_DPU_DPI_HALT_EN BIT(16) > > + > > +static const u32 layer_fmts[] = { > > + DRM_FORMAT_XRGB8888, > > + DRM_FORMAT_XBGR8888, > > + DRM_FORMAT_ARGB8888, > > + DRM_FORMAT_ABGR8888, > > + DRM_FORMAT_RGBA8888, > > + DRM_FORMAT_BGRA8888, > > + DRM_FORMAT_RGBX8888, > > + DRM_FORMAT_RGB565, > > + DRM_FORMAT_BGR565, > > + DRM_FORMAT_NV12, > > + DRM_FORMAT_NV21, > > + DRM_FORMAT_NV16, > > + DRM_FORMAT_NV61, > > + DRM_FORMAT_YUV420, > > + DRM_FORMAT_YVU420, > > +}; > > + > > +struct sprd_plane { > > + struct drm_plane base; > > +}; > > + > > +static u32 check_mmu_isr(struct sprd_dpu *dpu, u32 reg_val) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + u32 mmu_mask = BIT_DPU_INT_MMU_VAOR_RD | > > + BIT_DPU_INT_MMU_VAOR_WR | > > + BIT_DPU_INT_MMU_INV_RD | > > + BIT_DPU_INT_MMU_INV_WR; > > + u32 val = reg_val & mmu_mask; > > + int i; > > + > > + if (val) { > > + drm_err(dpu->drm, "--- iommu interrupt err: 0x%04x ---\n", val); > > + > > + if (val & BIT_DPU_INT_MMU_INV_RD) > > + drm_err(dpu->drm, "iommu invalid read error, addr: 0x%08x\n", > > + readl(ctx->base + REG_MMU_INV_ADDR_RD)); > > + if (val & BIT_DPU_INT_MMU_INV_WR) > > + drm_err(dpu->drm, "iommu invalid write error, addr: 0x%08x\n", > > + readl(ctx->base + REG_MMU_INV_ADDR_WR)); > > + if (val & BIT_DPU_INT_MMU_VAOR_RD) > > + drm_err(dpu->drm, "iommu va out of range read error, addr: 0x%08x\n", > > + readl(ctx->base + REG_MMU_VAOR_ADDR_RD)); > > + if (val & BIT_DPU_INT_MMU_VAOR_WR) > > + drm_err(dpu->drm, "iommu va out of range write error, addr: 0x%08x\n", > > + readl(ctx->base + REG_MMU_VAOR_ADDR_WR)); > > + > > + for (i = 0; i < 8; i++) { > > + reg_val = layer_reg_rd(ctx, REG_LAY_CTRL, i); > > + if (reg_val & 0x1) > > + drm_info(dpu->drm, "layer%d: 0x%x 0x%x 0x%x ctrl: 0x%x\n", i, > > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR0, i), > > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR1, i), > > + layer_reg_rd(ctx, REG_LAY_BASE_ADDR2, i), > > + layer_reg_rd(ctx, REG_LAY_CTRL, i)); > > + } > > + } > > + > > + return val; > > +} > > We'll still want an Acked-by from one of the IOMMU maintainers. Last > time they commented they were against that. > > > +static int dpu_wait_stop_done(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + int rc; > > + > > + if (ctx->stopped) > > + return 0; > > + > > + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_stop, > > + msecs_to_jiffies(500)); > > + ctx->evt_stop = false; > > + > > + ctx->stopped = true; > > + > > + if (!rc) { > > + drm_err(dpu->drm, "dpu wait for stop done time out!\n"); > > + return -ETIMEDOUT; > > + } > > + > > + return 0; > > +} > > + > > +static int dpu_wait_update_done(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + int rc; > > + > > + ctx->evt_update = false; > > + > > + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_update, > > + msecs_to_jiffies(500)); > > + > > + if (!rc) { > > + drm_err(dpu->drm, "dpu wait for reg update done time out!\n"); > > + return -ETIMEDOUT; > > + } > > + > > + return 0; > > +} > > + > > +static u32 drm_format_to_dpu(struct drm_framebuffer *fb) > > +{ > > + u32 format = 0; > > + > > + switch (fb->format->format) { > > + case DRM_FORMAT_BGRA8888: > > + /* BGRA8888 -> ARGB8888 */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; > > + format |= BIT_DPU_LAY_FORMAT_ARGB8888; > > + break; > > + case DRM_FORMAT_RGBX8888: > > + case DRM_FORMAT_RGBA8888: > > + /* RGBA8888 -> ABGR8888 */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; > > + fallthrough; > > + case DRM_FORMAT_ABGR8888: > > + /* RB switch */ > > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > > + fallthrough; > > + case DRM_FORMAT_ARGB8888: > > + format |= BIT_DPU_LAY_FORMAT_ARGB8888; > > + break; > > + case DRM_FORMAT_XBGR8888: > > + /* RB switch */ > > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > > + fallthrough; > > + case DRM_FORMAT_XRGB8888: > > + format |= BIT_DPU_LAY_FORMAT_ARGB8888; > > + break; > > + case DRM_FORMAT_BGR565: > > + /* RB switch */ > > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > > + fallthrough; > > + case DRM_FORMAT_RGB565: > > + format |= BIT_DPU_LAY_FORMAT_RGB565; > > + break; > > + case DRM_FORMAT_NV12: > > + /* 2-Lane: Yuv420 */ > > + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE; > > + /* Y endian */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > > + /* UV endian */ > > + format |= BIT_DPU_LAY_NO_SWITCH; > > + break; > > + case DRM_FORMAT_NV21: > > + /* 2-Lane: Yuv420 */ > > + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE; > > + /* Y endian */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > > + /* UV endian */ > > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > > + break; > > + case DRM_FORMAT_NV16: > > + /* 2-Lane: Yuv422 */ > > + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE; > > + /* Y endian */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; > > + /* UV endian */ > > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > > + break; > > + case DRM_FORMAT_NV61: > > + /* 2-Lane: Yuv422 */ > > + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE; > > + /* Y endian */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > > + /* UV endian */ > > + format |= BIT_DPU_LAY_NO_SWITCH; > > + break; > > + case DRM_FORMAT_YUV420: > > + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE; > > + /* Y endian */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > > + /* UV endian */ > > + format |= BIT_DPU_LAY_NO_SWITCH; > > + break; > > + case DRM_FORMAT_YVU420: > > + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE; > > + /* Y endian */ > > + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; > > + /* UV endian */ > > + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; > > + break; > > + default: > > + break; > > + } > > + > > + return format; > > +} > > + > > +static u32 drm_rotation_to_dpu(struct drm_plane_state *state) > > +{ > > + u32 rotation = 0; > > + > > + switch (state->rotation) { > > + default: > > + case DRM_MODE_ROTATE_0: > > + rotation = BIT_DPU_LAY_ROTATION_0; > > + break; > > + case DRM_MODE_ROTATE_90: > > + rotation = BIT_DPU_LAY_ROTATION_90; > > + break; > > + case DRM_MODE_ROTATE_180: > > + rotation = BIT_DPU_LAY_ROTATION_180; > > + break; > > + case DRM_MODE_ROTATE_270: > > + rotation = BIT_DPU_LAY_ROTATION_270; > > + break; > > + case DRM_MODE_REFLECT_Y: > > + rotation = BIT_DPU_LAY_ROTATION_180_M; > > + break; > > + case (DRM_MODE_REFLECT_Y | DRM_MODE_ROTATE_90): > > + rotation = BIT_DPU_LAY_ROTATION_90_M; > > + break; > > + case DRM_MODE_REFLECT_X: > > + rotation = BIT_DPU_LAY_ROTATION_0_M; > > + break; > > + case (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90): > > + rotation = BIT_DPU_LAY_ROTATION_270_M; > > + break; > > + } > > + > > + return rotation; > > +} > > + > > +static u32 drm_blend_to_dpu(struct drm_plane_state *state) > > +{ > > + u32 blend = 0; > > + > > + switch (state->pixel_blend_mode) { > > + case DRM_MODE_BLEND_COVERAGE: > > + /* alpha mode select - combo alpha */ > > + blend |= BIT_DPU_LAY_COMBO_ALPHA; > > + /* Normal mode */ > > + blend |= BIT_DPU_LAY_MODE_BLEND_NORMAL; > > + break; > > + case DRM_MODE_BLEND_PREMULTI: > > + /* alpha mode select - combo alpha */ > > + blend |= BIT_DPU_LAY_COMBO_ALPHA; > > + /* Pre-mult mode */ > > + blend |= BIT_DPU_LAY_MODE_BLEND_PREMULT; > > + break; > > + case DRM_MODE_BLEND_PIXEL_NONE: > > + default: > > + /* don't do blending, maybe RGBX */ > > + /* alpha mode select - layer alpha */ > > + blend |= BIT_DPU_LAY_LAYER_ALPHA; > > + break; > > + } > > + > > + return blend; > > +} > > + > > +static void sprd_dpu_layer(struct sprd_dpu *dpu, struct drm_plane_state *state) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + struct drm_gem_cma_object *cma_obj; > > + struct drm_framebuffer *fb = state->fb; > > + u32 addr, size, offset, pitch, blend, format, rotation; > > + u32 src_x = state->src_x >> 16; > > + u32 src_y = state->src_y >> 16; > > + u32 src_w = state->src_w >> 16; > > + u32 src_h = state->src_h >> 16; > > + u32 dst_x = state->crtc_x; > > + u32 dst_y = state->crtc_y; > > + u32 alpha = state->alpha; > > + u32 index = state->zpos; > > + int i; > > + > > + offset = (dst_x & 0xffff) | (dst_y << 16); > > + size = (src_w & 0xffff) | (src_h << 16); > > + > > + for (i = 0; i < fb->format->num_planes; i++) { > > + cma_obj = drm_fb_cma_get_gem_obj(fb, i); > > + addr = cma_obj->paddr + fb->offsets[i]; > > + > > + if (i == 0) > > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR0, addr, index); > > + else if (i == 1) > > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR1, addr, index); > > + else > > + layer_reg_wr(ctx, REG_LAY_BASE_ADDR2, addr, index); > > + } > > + > > + if (fb->format->num_planes == 3) { > > + /* UV pitch is 1/2 of Y pitch */ > > + pitch = (fb->pitches[0] / fb->format->cpp[0]) | > > + (fb->pitches[0] / fb->format->cpp[0] << 15); > > + } else { > > + pitch = fb->pitches[0] / fb->format->cpp[0]; > > + } > > + > > + layer_reg_wr(ctx, REG_LAY_POS, offset, index); > > + layer_reg_wr(ctx, REG_LAY_SIZE, size, index); > > + layer_reg_wr(ctx, REG_LAY_CROP_START, > > + src_y << 16 | src_x, index); > > + layer_reg_wr(ctx, REG_LAY_ALPHA, alpha, index); > > + layer_reg_wr(ctx, REG_LAY_PITCH, pitch, index); > > + > > + format = drm_format_to_dpu(fb); > > + blend = drm_blend_to_dpu(state); > > + rotation = drm_rotation_to_dpu(state); > > + > > + layer_reg_wr(ctx, REG_LAY_CTRL, BIT_DPU_LAY_EN | > > + format | > > + blend | > > + rotation, > > + index); > > +} > > + > > +static void sprd_dpu_flip(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + u32 reg_val; > > + > > + /* > > + * Make sure the dpu is in stop status. DPU has no shadow > > + * registers in EDPI mode. So the config registers can only be > > + * updated in the rising edge of DPU_RUN bit. > > + */ > > + if (ctx->if_type == SPRD_DPU_IF_EDPI) > > + dpu_wait_stop_done(dpu); > > + > > + /* update trigger and wait */ > > + if (ctx->if_type == SPRD_DPU_IF_DPI) { > > + if (!ctx->stopped) { > > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_REG_UPDATE); > > + dpu_wait_update_done(dpu); > > + } > > + > > + dpu_reg_set(ctx, REG_DPU_INT_EN, BIT_DPU_INT_ERR); > > + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) { > > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN); > > + > > + ctx->stopped = false; > > + } > > + > > + /* > > + * If the following interrupt was disabled in isr, > > + * re-enable it. > > + */ > > + reg_val = BIT_DPU_INT_MMU_VAOR_RD | > > + BIT_DPU_INT_MMU_VAOR_WR | > > + BIT_DPU_INT_MMU_INV_RD | > > + BIT_DPU_INT_MMU_INV_WR; > > + dpu_reg_set(ctx, REG_DPU_INT_EN, reg_val); > > +} > > + > > +static void sprd_dpu_init(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + u32 int_mask = 0; > > + > > + writel(0x00, ctx->base + REG_BG_COLOR); > > + writel(0x00, ctx->base + REG_MMU_EN); > > + writel(0x00, ctx->base + REG_MMU_PPN1); > > + writel(0xffff, ctx->base + REG_MMU_RANGE1); > > + writel(0x00, ctx->base + REG_MMU_PPN2); > > + writel(0xffff, ctx->base + REG_MMU_RANGE2); > > + writel(0x1ffff, ctx->base + REG_MMU_VPN_RANGE); > > + > > + if (ctx->if_type == SPRD_DPU_IF_DPI) { > > + /* use dpi as interface */ > > + dpu_reg_clr(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI); > > + /* disable Halt function for SPRD DSI */ > > + dpu_reg_clr(ctx, REG_DPI_CTRL, BIT_DPU_DPI_HALT_EN); > > + /* select te from external pad */ > > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD); > > + > > + /* enable dpu update done INT */ > > + int_mask |= BIT_DPU_INT_UPDATE_DONE; > > + /* enable dpu done INT */ > > + int_mask |= BIT_DPU_INT_DONE; > > + /* enable dpu dpi vsync */ > > + int_mask |= BIT_DPU_INT_VSYNC; > > + /* enable dpu TE INT */ > > + int_mask |= BIT_DPU_INT_TE; > > + /* enable underflow err INT */ > > + int_mask |= BIT_DPU_INT_ERR; > > + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) { > > + /* use edpi as interface */ > > + dpu_reg_set(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI); > > + /* use external te */ > > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD); > > + /* enable te */ > > + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_TE_EN); > > + > > + /* enable stop done INT */ > > + int_mask |= BIT_DPU_INT_DONE; > > + /* enable TE INT */ > > + int_mask |= BIT_DPU_INT_TE; > > + } > > + > > + /* enable iommu va out of range read error INT */ > > + int_mask |= BIT_DPU_INT_MMU_VAOR_RD; > > + /* enable iommu va out of range write error INT */ > > + int_mask |= BIT_DPU_INT_MMU_VAOR_WR; > > + /* enable iommu invalid read error INT */ > > + int_mask |= BIT_DPU_INT_MMU_INV_RD; > > + /* enable iommu invalid write error INT */ > > + int_mask |= BIT_DPU_INT_MMU_INV_WR; > > + > > + writel(int_mask, ctx->base + REG_DPU_INT_EN); > > +} > > + > > +static void sprd_dpu_fini(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + > > + writel(0x00, ctx->base + REG_DPU_INT_EN); > > + writel(0xff, ctx->base + REG_DPU_INT_CLR); > > +} > > + > > +static void sprd_dpi_init(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + u32 reg_val; > > + u32 size; > > + > > + size = (ctx->vm.vactive << 16) | ctx->vm.hactive; > > + writel(size, ctx->base + REG_PANEL_SIZE); > > + writel(size, ctx->base + REG_BLEND_SIZE); > > + > > + if (ctx->if_type == SPRD_DPU_IF_DPI) { > > + /* set dpi timing */ > > + reg_val = ctx->vm.hsync_len << 0 | > > + ctx->vm.hback_porch << 8 | > > + ctx->vm.hfront_porch << 20; > > + writel(reg_val, ctx->base + REG_DPI_H_TIMING); > > + > > + reg_val = ctx->vm.vsync_len << 0 | > > + ctx->vm.vback_porch << 8 | > > + ctx->vm.vfront_porch << 20; > > + writel(reg_val, ctx->base + REG_DPI_V_TIMING); > > + } > > +} > > + > > +void sprd_dpu_run(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + > > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN); > > + > > + ctx->stopped = false; > > +} > > + > > +void sprd_dpu_stop(struct sprd_dpu *dpu) > > +{ > > + struct dpu_context *ctx = &dpu->ctx; > > + > > + if (ctx->if_type == SPRD_DPU_IF_DPI) > > + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_STOP); > > + > > + dpu_wait_stop_done(dpu); > > +} > > + > > +static int sprd_plane_atomic_check(struct drm_plane *plane, > > + struct drm_atomic_state *state) > > +{ > > + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, > > + plane); > > + struct drm_crtc_state *crtc_state; > > + u32 fmt; > > + > > + if (!plane_state->fb || !plane_state->crtc) > > + return 0; > > + > > + fmt = drm_format_to_dpu(plane_state->fb); > > + if (!fmt) > > + return -EINVAL; > > + > > + crtc_state = drm_atomic_get_crtc_state(plane_state->state, plane_state->crtc); > > + if (IS_ERR(crtc_state)) > > + return PTR_ERR(crtc_state); > > + > > + return drm_atomic_helper_check_plane_state(plane_state, crtc_state, > > + DRM_PLANE_HELPER_NO_SCALING, > > + DRM_PLANE_HELPER_NO_SCALING, > > + true, true); > > +} > > + > > +static void sprd_plane_atomic_update(struct drm_plane *drm_plane, > > + struct drm_atomic_state *state) > > +{ > > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, > > + drm_plane); > > + struct sprd_dpu *dpu = to_sprd_crtc(new_state->crtc); > > + > > + /* start configure dpu layers */ > > + sprd_dpu_layer(dpu, new_state); > > +} > > + > > +static void sprd_plane_atomic_disable(struct drm_plane *drm_plane, > > + struct drm_atomic_state *state) > > +{ > > + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, > > + drm_plane); > > + struct sprd_dpu *dpu = to_sprd_crtc(old_state->crtc); > > + > > + layer_reg_wr(&dpu->ctx, REG_LAY_CTRL, 0x00, old_state->zpos); > > +} > > + > > +static void sprd_plane_create_properties(struct sprd_plane *plane, int index) > > +{ > > + unsigned int supported_modes = BIT(DRM_MODE_BLEND_PIXEL_NONE) | > > + BIT(DRM_MODE_BLEND_PREMULTI) | > > + BIT(DRM_MODE_BLEND_COVERAGE); > > + > > + /* create rotation property */ > > + drm_plane_create_rotation_property(&plane->base, > > + DRM_MODE_ROTATE_0, > > + DRM_MODE_ROTATE_MASK | > > + DRM_MODE_REFLECT_MASK); > > + > > + /* create alpha property */ > > + drm_plane_create_alpha_property(&plane->base); > > + > > + /* create blend mode property */ > > + drm_plane_create_blend_mode_property(&plane->base, supported_modes); > > + > > + /* create zpos property */ > > + drm_plane_create_zpos_immutable_property(&plane->base, index); > > +} > > + > > +static const struct drm_plane_helper_funcs sprd_plane_helper_funcs = { > > + .atomic_check = sprd_plane_atomic_check, > > + .atomic_update = sprd_plane_atomic_update, > > + .atomic_disable = sprd_plane_atomic_disable, > > +}; > > + > > +static const struct drm_plane_funcs sprd_plane_funcs = { > > + .update_plane = drm_atomic_helper_update_plane, > > + .disable_plane = drm_atomic_helper_disable_plane, > > + .destroy = drm_plane_cleanup, > > + .reset = drm_atomic_helper_plane_reset, > > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > > +}; > > + > > +static struct sprd_plane *sprd_planes_init(struct drm_device *drm) > > +{ > > + struct sprd_plane *plane, *primary; > > + enum drm_plane_type plane_type; > > + int i; > > + > > + for (i = 0; i < 6; i++) { > > + plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : > > + DRM_PLANE_TYPE_OVERLAY; > > + > > + plane = drmm_universal_plane_alloc(drm, struct sprd_plane, base, > > + 1, &sprd_plane_funcs, > > + layer_fmts, ARRAY_SIZE(layer_fmts), > > + NULL, plane_type, NULL); > > + if (IS_ERR(plane)) { > > + drm_err(drm, "failed to init drm plane: %d\n", i); > > + return plane; > > + } > > + > > + drm_plane_helper_add(&plane->base, &sprd_plane_helper_funcs); > > + > > + sprd_plane_create_properties(plane, i); > > + > > + if (i == 0) > > + primary = plane; > > + } > > + > > + return primary; > > +} > > + > > +static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc) > > +{ > > + struct sprd_dpu *dpu = to_sprd_crtc(crtc); > > + struct drm_display_mode *mode = &crtc->state->adjusted_mode; > > + > > + drm_display_mode_to_videomode(mode, &dpu->ctx.vm); > > You don't need to store the videomode into you dpu structure, just pass > adjusted_mode to sprd_dpi_init. I get it, thks. > > > + sprd_dpi_init(dpu); > > +} > > + > > +static void sprd_crtc_atomic_enable(struct drm_crtc *crtc, > > + struct drm_atomic_state *state) > > +{ > > + struct sprd_dpu *dpu = to_sprd_crtc(crtc); > > + > > + sprd_dpu_init(dpu); > > Do you need to do it on both mode_set_nofb and atomic_enable? mode_set_nofb is sprd_dpi_init, but atomic_enable is sprd_dpu_init, not the same interface. > > Maxime
diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig index 726c3e76d..37762c333 100644 --- a/drivers/gpu/drm/sprd/Kconfig +++ b/drivers/gpu/drm/sprd/Kconfig @@ -5,6 +5,7 @@ config DRM_SPRD select DRM_GEM_CMA_HELPER select DRM_KMS_CMA_HELPER select DRM_KMS_HELPER + select VIDEOMODE_HELPERS help Choose this option if you have a Unisoc chipset. If M is selected the module will be called sprd_drm. diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile index 9850f00b8..ab12b95e6 100644 --- a/drivers/gpu/drm/sprd/Makefile +++ b/drivers/gpu/drm/sprd/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-y := sprd_drm.o +obj-y := sprd_drm.o \ + sprd_dpu.o diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c new file mode 100644 index 000000000..448dd4fb6 --- /dev/null +++ b/drivers/gpu/drm/sprd/sprd_dpu.c @@ -0,0 +1,937 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Unisoc Inc. + */ + +#include <linux/component.h> +#include <linux/delay.h> +#include <linux/dma-buf.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/of_irq.h> +#include <linux/wait.h> +#include <linux/workqueue.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_fb_cma_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_plane_helper.h> + +#include "sprd_drm.h" +#include "sprd_dpu.h" + +/* Global control registers */ +#define REG_DPU_CTRL 0x04 +#define REG_DPU_CFG0 0x08 +#define REG_PANEL_SIZE 0x20 +#define REG_BLEND_SIZE 0x24 +#define REG_BG_COLOR 0x2C + +/* Layer0 control registers */ +#define REG_LAY_BASE_ADDR0 0x30 +#define REG_LAY_BASE_ADDR1 0x34 +#define REG_LAY_BASE_ADDR2 0x38 +#define REG_LAY_CTRL 0x40 +#define REG_LAY_SIZE 0x44 +#define REG_LAY_PITCH 0x48 +#define REG_LAY_POS 0x4C +#define REG_LAY_ALPHA 0x50 +#define REG_LAY_CROP_START 0x5C + +/* Interrupt control registers */ +#define REG_DPU_INT_EN 0x1E0 +#define REG_DPU_INT_CLR 0x1E4 +#define REG_DPU_INT_STS 0x1E8 + +/* DPI control registers */ +#define REG_DPI_CTRL 0x1F0 +#define REG_DPI_H_TIMING 0x1F4 +#define REG_DPI_V_TIMING 0x1F8 + +/* MMU control registers */ +#define REG_MMU_EN 0x800 +#define REG_MMU_VPN_RANGE 0x80C +#define REG_MMU_VAOR_ADDR_RD 0x818 +#define REG_MMU_VAOR_ADDR_WR 0x81C +#define REG_MMU_INV_ADDR_RD 0x820 +#define REG_MMU_INV_ADDR_WR 0x824 +#define REG_MMU_PPN1 0x83C +#define REG_MMU_RANGE1 0x840 +#define REG_MMU_PPN2 0x844 +#define REG_MMU_RANGE2 0x848 + +/* Global control bits */ +#define BIT_DPU_RUN BIT(0) +#define BIT_DPU_STOP BIT(1) +#define BIT_DPU_REG_UPDATE BIT(2) +#define BIT_DPU_IF_EDPI BIT(0) + +/* Layer control bits */ +#define BIT_DPU_LAY_EN BIT(0) +#define BIT_DPU_LAY_LAYER_ALPHA (0x01 << 2) +#define BIT_DPU_LAY_COMBO_ALPHA (0x02 << 2) +#define BIT_DPU_LAY_FORMAT_YUV422_2PLANE (0x00 << 4) +#define BIT_DPU_LAY_FORMAT_YUV420_2PLANE (0x01 << 4) +#define BIT_DPU_LAY_FORMAT_YUV420_3PLANE (0x02 << 4) +#define BIT_DPU_LAY_FORMAT_ARGB8888 (0x03 << 4) +#define BIT_DPU_LAY_FORMAT_RGB565 (0x04 << 4) +#define BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3 (0x00 << 8) +#define BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0 (0x01 << 8) +#define BIT_DPU_LAY_NO_SWITCH (0x00 << 10) +#define BIT_DPU_LAY_RB_OR_UV_SWITCH (0x01 << 10) +#define BIT_DPU_LAY_MODE_BLEND_NORMAL (0x00 << 16) +#define BIT_DPU_LAY_MODE_BLEND_PREMULT (0x01 << 16) +#define BIT_DPU_LAY_ROTATION_0 (0x00 << 20) +#define BIT_DPU_LAY_ROTATION_90 (0x01 << 20) +#define BIT_DPU_LAY_ROTATION_180 (0x02 << 20) +#define BIT_DPU_LAY_ROTATION_270 (0x03 << 20) +#define BIT_DPU_LAY_ROTATION_0_M (0x04 << 20) +#define BIT_DPU_LAY_ROTATION_90_M (0x05 << 20) +#define BIT_DPU_LAY_ROTATION_180_M (0x06 << 20) +#define BIT_DPU_LAY_ROTATION_270_M (0x07 << 20) + +/* Interrupt control & status bits */ +#define BIT_DPU_INT_DONE BIT(0) +#define BIT_DPU_INT_TE BIT(1) +#define BIT_DPU_INT_ERR BIT(2) +#define BIT_DPU_INT_UPDATE_DONE BIT(4) +#define BIT_DPU_INT_VSYNC BIT(5) +#define BIT_DPU_INT_MMU_VAOR_RD BIT(16) +#define BIT_DPU_INT_MMU_VAOR_WR BIT(17) +#define BIT_DPU_INT_MMU_INV_RD BIT(18) +#define BIT_DPU_INT_MMU_INV_WR BIT(19) + +/* DPI control bits */ +#define BIT_DPU_EDPI_TE_EN BIT(8) +#define BIT_DPU_EDPI_FROM_EXTERNAL_PAD BIT(10) +#define BIT_DPU_DPI_HALT_EN BIT(16) + +static const u32 layer_fmts[] = { + DRM_FORMAT_XRGB8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_ABGR8888, + DRM_FORMAT_RGBA8888, + DRM_FORMAT_BGRA8888, + DRM_FORMAT_RGBX8888, + DRM_FORMAT_RGB565, + DRM_FORMAT_BGR565, + DRM_FORMAT_NV12, + DRM_FORMAT_NV21, + DRM_FORMAT_NV16, + DRM_FORMAT_NV61, + DRM_FORMAT_YUV420, + DRM_FORMAT_YVU420, +}; + +struct sprd_plane { + struct drm_plane base; +}; + +static u32 check_mmu_isr(struct sprd_dpu *dpu, u32 reg_val) +{ + struct dpu_context *ctx = &dpu->ctx; + u32 mmu_mask = BIT_DPU_INT_MMU_VAOR_RD | + BIT_DPU_INT_MMU_VAOR_WR | + BIT_DPU_INT_MMU_INV_RD | + BIT_DPU_INT_MMU_INV_WR; + u32 val = reg_val & mmu_mask; + int i; + + if (val) { + drm_err(dpu->drm, "--- iommu interrupt err: 0x%04x ---\n", val); + + if (val & BIT_DPU_INT_MMU_INV_RD) + drm_err(dpu->drm, "iommu invalid read error, addr: 0x%08x\n", + readl(ctx->base + REG_MMU_INV_ADDR_RD)); + if (val & BIT_DPU_INT_MMU_INV_WR) + drm_err(dpu->drm, "iommu invalid write error, addr: 0x%08x\n", + readl(ctx->base + REG_MMU_INV_ADDR_WR)); + if (val & BIT_DPU_INT_MMU_VAOR_RD) + drm_err(dpu->drm, "iommu va out of range read error, addr: 0x%08x\n", + readl(ctx->base + REG_MMU_VAOR_ADDR_RD)); + if (val & BIT_DPU_INT_MMU_VAOR_WR) + drm_err(dpu->drm, "iommu va out of range write error, addr: 0x%08x\n", + readl(ctx->base + REG_MMU_VAOR_ADDR_WR)); + + for (i = 0; i < 8; i++) { + reg_val = layer_reg_rd(ctx, REG_LAY_CTRL, i); + if (reg_val & 0x1) + drm_info(dpu->drm, "layer%d: 0x%x 0x%x 0x%x ctrl: 0x%x\n", i, + layer_reg_rd(ctx, REG_LAY_BASE_ADDR0, i), + layer_reg_rd(ctx, REG_LAY_BASE_ADDR1, i), + layer_reg_rd(ctx, REG_LAY_BASE_ADDR2, i), + layer_reg_rd(ctx, REG_LAY_CTRL, i)); + } + } + + return val; +} + +static int dpu_wait_stop_done(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + int rc; + + if (ctx->stopped) + return 0; + + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_stop, + msecs_to_jiffies(500)); + ctx->evt_stop = false; + + ctx->stopped = true; + + if (!rc) { + drm_err(dpu->drm, "dpu wait for stop done time out!\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int dpu_wait_update_done(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + int rc; + + ctx->evt_update = false; + + rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_update, + msecs_to_jiffies(500)); + + if (!rc) { + drm_err(dpu->drm, "dpu wait for reg update done time out!\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static u32 drm_format_to_dpu(struct drm_framebuffer *fb) +{ + u32 format = 0; + + switch (fb->format->format) { + case DRM_FORMAT_BGRA8888: + /* BGRA8888 -> ARGB8888 */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; + format |= BIT_DPU_LAY_FORMAT_ARGB8888; + break; + case DRM_FORMAT_RGBX8888: + case DRM_FORMAT_RGBA8888: + /* RGBA8888 -> ABGR8888 */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; + fallthrough; + case DRM_FORMAT_ABGR8888: + /* RB switch */ + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; + fallthrough; + case DRM_FORMAT_ARGB8888: + format |= BIT_DPU_LAY_FORMAT_ARGB8888; + break; + case DRM_FORMAT_XBGR8888: + /* RB switch */ + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; + fallthrough; + case DRM_FORMAT_XRGB8888: + format |= BIT_DPU_LAY_FORMAT_ARGB8888; + break; + case DRM_FORMAT_BGR565: + /* RB switch */ + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; + fallthrough; + case DRM_FORMAT_RGB565: + format |= BIT_DPU_LAY_FORMAT_RGB565; + break; + case DRM_FORMAT_NV12: + /* 2-Lane: Yuv420 */ + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE; + /* Y endian */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; + /* UV endian */ + format |= BIT_DPU_LAY_NO_SWITCH; + break; + case DRM_FORMAT_NV21: + /* 2-Lane: Yuv420 */ + format |= BIT_DPU_LAY_FORMAT_YUV420_2PLANE; + /* Y endian */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; + /* UV endian */ + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; + break; + case DRM_FORMAT_NV16: + /* 2-Lane: Yuv422 */ + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE; + /* Y endian */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B3B2B1B0; + /* UV endian */ + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; + break; + case DRM_FORMAT_NV61: + /* 2-Lane: Yuv422 */ + format |= BIT_DPU_LAY_FORMAT_YUV422_2PLANE; + /* Y endian */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; + /* UV endian */ + format |= BIT_DPU_LAY_NO_SWITCH; + break; + case DRM_FORMAT_YUV420: + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE; + /* Y endian */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; + /* UV endian */ + format |= BIT_DPU_LAY_NO_SWITCH; + break; + case DRM_FORMAT_YVU420: + format |= BIT_DPU_LAY_FORMAT_YUV420_3PLANE; + /* Y endian */ + format |= BIT_DPU_LAY_DATA_ENDIAN_B0B1B2B3; + /* UV endian */ + format |= BIT_DPU_LAY_RB_OR_UV_SWITCH; + break; + default: + break; + } + + return format; +} + +static u32 drm_rotation_to_dpu(struct drm_plane_state *state) +{ + u32 rotation = 0; + + switch (state->rotation) { + default: + case DRM_MODE_ROTATE_0: + rotation = BIT_DPU_LAY_ROTATION_0; + break; + case DRM_MODE_ROTATE_90: + rotation = BIT_DPU_LAY_ROTATION_90; + break; + case DRM_MODE_ROTATE_180: + rotation = BIT_DPU_LAY_ROTATION_180; + break; + case DRM_MODE_ROTATE_270: + rotation = BIT_DPU_LAY_ROTATION_270; + break; + case DRM_MODE_REFLECT_Y: + rotation = BIT_DPU_LAY_ROTATION_180_M; + break; + case (DRM_MODE_REFLECT_Y | DRM_MODE_ROTATE_90): + rotation = BIT_DPU_LAY_ROTATION_90_M; + break; + case DRM_MODE_REFLECT_X: + rotation = BIT_DPU_LAY_ROTATION_0_M; + break; + case (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90): + rotation = BIT_DPU_LAY_ROTATION_270_M; + break; + } + + return rotation; +} + +static u32 drm_blend_to_dpu(struct drm_plane_state *state) +{ + u32 blend = 0; + + switch (state->pixel_blend_mode) { + case DRM_MODE_BLEND_COVERAGE: + /* alpha mode select - combo alpha */ + blend |= BIT_DPU_LAY_COMBO_ALPHA; + /* Normal mode */ + blend |= BIT_DPU_LAY_MODE_BLEND_NORMAL; + break; + case DRM_MODE_BLEND_PREMULTI: + /* alpha mode select - combo alpha */ + blend |= BIT_DPU_LAY_COMBO_ALPHA; + /* Pre-mult mode */ + blend |= BIT_DPU_LAY_MODE_BLEND_PREMULT; + break; + case DRM_MODE_BLEND_PIXEL_NONE: + default: + /* don't do blending, maybe RGBX */ + /* alpha mode select - layer alpha */ + blend |= BIT_DPU_LAY_LAYER_ALPHA; + break; + } + + return blend; +} + +static void sprd_dpu_layer(struct sprd_dpu *dpu, struct drm_plane_state *state) +{ + struct dpu_context *ctx = &dpu->ctx; + struct drm_gem_cma_object *cma_obj; + struct drm_framebuffer *fb = state->fb; + u32 addr, size, offset, pitch, blend, format, rotation; + u32 src_x = state->src_x >> 16; + u32 src_y = state->src_y >> 16; + u32 src_w = state->src_w >> 16; + u32 src_h = state->src_h >> 16; + u32 dst_x = state->crtc_x; + u32 dst_y = state->crtc_y; + u32 alpha = state->alpha; + u32 index = state->zpos; + int i; + + offset = (dst_x & 0xffff) | (dst_y << 16); + size = (src_w & 0xffff) | (src_h << 16); + + for (i = 0; i < fb->format->num_planes; i++) { + cma_obj = drm_fb_cma_get_gem_obj(fb, i); + addr = cma_obj->paddr + fb->offsets[i]; + + if (i == 0) + layer_reg_wr(ctx, REG_LAY_BASE_ADDR0, addr, index); + else if (i == 1) + layer_reg_wr(ctx, REG_LAY_BASE_ADDR1, addr, index); + else + layer_reg_wr(ctx, REG_LAY_BASE_ADDR2, addr, index); + } + + if (fb->format->num_planes == 3) { + /* UV pitch is 1/2 of Y pitch */ + pitch = (fb->pitches[0] / fb->format->cpp[0]) | + (fb->pitches[0] / fb->format->cpp[0] << 15); + } else { + pitch = fb->pitches[0] / fb->format->cpp[0]; + } + + layer_reg_wr(ctx, REG_LAY_POS, offset, index); + layer_reg_wr(ctx, REG_LAY_SIZE, size, index); + layer_reg_wr(ctx, REG_LAY_CROP_START, + src_y << 16 | src_x, index); + layer_reg_wr(ctx, REG_LAY_ALPHA, alpha, index); + layer_reg_wr(ctx, REG_LAY_PITCH, pitch, index); + + format = drm_format_to_dpu(fb); + blend = drm_blend_to_dpu(state); + rotation = drm_rotation_to_dpu(state); + + layer_reg_wr(ctx, REG_LAY_CTRL, BIT_DPU_LAY_EN | + format | + blend | + rotation, + index); +} + +static void sprd_dpu_flip(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + u32 reg_val; + + /* + * Make sure the dpu is in stop status. DPU has no shadow + * registers in EDPI mode. So the config registers can only be + * updated in the rising edge of DPU_RUN bit. + */ + if (ctx->if_type == SPRD_DPU_IF_EDPI) + dpu_wait_stop_done(dpu); + + /* update trigger and wait */ + if (ctx->if_type == SPRD_DPU_IF_DPI) { + if (!ctx->stopped) { + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_REG_UPDATE); + dpu_wait_update_done(dpu); + } + + dpu_reg_set(ctx, REG_DPU_INT_EN, BIT_DPU_INT_ERR); + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) { + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN); + + ctx->stopped = false; + } + + /* + * If the following interrupt was disabled in isr, + * re-enable it. + */ + reg_val = BIT_DPU_INT_MMU_VAOR_RD | + BIT_DPU_INT_MMU_VAOR_WR | + BIT_DPU_INT_MMU_INV_RD | + BIT_DPU_INT_MMU_INV_WR; + dpu_reg_set(ctx, REG_DPU_INT_EN, reg_val); +} + +static void sprd_dpu_init(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + u32 int_mask = 0; + + writel(0x00, ctx->base + REG_BG_COLOR); + writel(0x00, ctx->base + REG_MMU_EN); + writel(0x00, ctx->base + REG_MMU_PPN1); + writel(0xffff, ctx->base + REG_MMU_RANGE1); + writel(0x00, ctx->base + REG_MMU_PPN2); + writel(0xffff, ctx->base + REG_MMU_RANGE2); + writel(0x1ffff, ctx->base + REG_MMU_VPN_RANGE); + + if (ctx->if_type == SPRD_DPU_IF_DPI) { + /* use dpi as interface */ + dpu_reg_clr(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI); + /* disable Halt function for SPRD DSI */ + dpu_reg_clr(ctx, REG_DPI_CTRL, BIT_DPU_DPI_HALT_EN); + /* select te from external pad */ + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD); + + /* enable dpu update done INT */ + int_mask |= BIT_DPU_INT_UPDATE_DONE; + /* enable dpu done INT */ + int_mask |= BIT_DPU_INT_DONE; + /* enable dpu dpi vsync */ + int_mask |= BIT_DPU_INT_VSYNC; + /* enable dpu TE INT */ + int_mask |= BIT_DPU_INT_TE; + /* enable underflow err INT */ + int_mask |= BIT_DPU_INT_ERR; + } else if (ctx->if_type == SPRD_DPU_IF_EDPI) { + /* use edpi as interface */ + dpu_reg_set(ctx, REG_DPU_CFG0, BIT_DPU_IF_EDPI); + /* use external te */ + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_FROM_EXTERNAL_PAD); + /* enable te */ + dpu_reg_set(ctx, REG_DPI_CTRL, BIT_DPU_EDPI_TE_EN); + + /* enable stop done INT */ + int_mask |= BIT_DPU_INT_DONE; + /* enable TE INT */ + int_mask |= BIT_DPU_INT_TE; + } + + /* enable iommu va out of range read error INT */ + int_mask |= BIT_DPU_INT_MMU_VAOR_RD; + /* enable iommu va out of range write error INT */ + int_mask |= BIT_DPU_INT_MMU_VAOR_WR; + /* enable iommu invalid read error INT */ + int_mask |= BIT_DPU_INT_MMU_INV_RD; + /* enable iommu invalid write error INT */ + int_mask |= BIT_DPU_INT_MMU_INV_WR; + + writel(int_mask, ctx->base + REG_DPU_INT_EN); +} + +static void sprd_dpu_fini(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + + writel(0x00, ctx->base + REG_DPU_INT_EN); + writel(0xff, ctx->base + REG_DPU_INT_CLR); +} + +static void sprd_dpi_init(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + u32 reg_val; + u32 size; + + size = (ctx->vm.vactive << 16) | ctx->vm.hactive; + writel(size, ctx->base + REG_PANEL_SIZE); + writel(size, ctx->base + REG_BLEND_SIZE); + + if (ctx->if_type == SPRD_DPU_IF_DPI) { + /* set dpi timing */ + reg_val = ctx->vm.hsync_len << 0 | + ctx->vm.hback_porch << 8 | + ctx->vm.hfront_porch << 20; + writel(reg_val, ctx->base + REG_DPI_H_TIMING); + + reg_val = ctx->vm.vsync_len << 0 | + ctx->vm.vback_porch << 8 | + ctx->vm.vfront_porch << 20; + writel(reg_val, ctx->base + REG_DPI_V_TIMING); + } +} + +void sprd_dpu_run(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_RUN); + + ctx->stopped = false; +} + +void sprd_dpu_stop(struct sprd_dpu *dpu) +{ + struct dpu_context *ctx = &dpu->ctx; + + if (ctx->if_type == SPRD_DPU_IF_DPI) + dpu_reg_set(ctx, REG_DPU_CTRL, BIT_DPU_STOP); + + dpu_wait_stop_done(dpu); +} + +static int sprd_plane_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, + plane); + struct drm_crtc_state *crtc_state; + u32 fmt; + + if (!plane_state->fb || !plane_state->crtc) + return 0; + + fmt = drm_format_to_dpu(plane_state->fb); + if (!fmt) + return -EINVAL; + + crtc_state = drm_atomic_get_crtc_state(plane_state->state, plane_state->crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + return drm_atomic_helper_check_plane_state(plane_state, crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + true, true); +} + +static void sprd_plane_atomic_update(struct drm_plane *drm_plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, + drm_plane); + struct sprd_dpu *dpu = to_sprd_crtc(new_state->crtc); + + /* start configure dpu layers */ + sprd_dpu_layer(dpu, new_state); +} + +static void sprd_plane_atomic_disable(struct drm_plane *drm_plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, + drm_plane); + struct sprd_dpu *dpu = to_sprd_crtc(old_state->crtc); + + layer_reg_wr(&dpu->ctx, REG_LAY_CTRL, 0x00, old_state->zpos); +} + +static void sprd_plane_create_properties(struct sprd_plane *plane, int index) +{ + unsigned int supported_modes = BIT(DRM_MODE_BLEND_PIXEL_NONE) | + BIT(DRM_MODE_BLEND_PREMULTI) | + BIT(DRM_MODE_BLEND_COVERAGE); + + /* create rotation property */ + drm_plane_create_rotation_property(&plane->base, + DRM_MODE_ROTATE_0, + DRM_MODE_ROTATE_MASK | + DRM_MODE_REFLECT_MASK); + + /* create alpha property */ + drm_plane_create_alpha_property(&plane->base); + + /* create blend mode property */ + drm_plane_create_blend_mode_property(&plane->base, supported_modes); + + /* create zpos property */ + drm_plane_create_zpos_immutable_property(&plane->base, index); +} + +static const struct drm_plane_helper_funcs sprd_plane_helper_funcs = { + .atomic_check = sprd_plane_atomic_check, + .atomic_update = sprd_plane_atomic_update, + .atomic_disable = sprd_plane_atomic_disable, +}; + +static const struct drm_plane_funcs sprd_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, +}; + +static struct sprd_plane *sprd_planes_init(struct drm_device *drm) +{ + struct sprd_plane *plane, *primary; + enum drm_plane_type plane_type; + int i; + + for (i = 0; i < 6; i++) { + plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY : + DRM_PLANE_TYPE_OVERLAY; + + plane = drmm_universal_plane_alloc(drm, struct sprd_plane, base, + 1, &sprd_plane_funcs, + layer_fmts, ARRAY_SIZE(layer_fmts), + NULL, plane_type, NULL); + if (IS_ERR(plane)) { + drm_err(drm, "failed to init drm plane: %d\n", i); + return plane; + } + + drm_plane_helper_add(&plane->base, &sprd_plane_helper_funcs); + + sprd_plane_create_properties(plane, i); + + if (i == 0) + primary = plane; + } + + return primary; +} + +static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc) +{ + struct sprd_dpu *dpu = to_sprd_crtc(crtc); + struct drm_display_mode *mode = &crtc->state->adjusted_mode; + + drm_display_mode_to_videomode(mode, &dpu->ctx.vm); + + sprd_dpi_init(dpu); +} + +static void sprd_crtc_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct sprd_dpu *dpu = to_sprd_crtc(crtc); + + sprd_dpu_init(dpu); + + drm_crtc_vblank_on(&dpu->base); +} + +static void sprd_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct sprd_dpu *dpu = to_sprd_crtc(crtc); + struct drm_device *drm = dpu->base.dev; + + drm_crtc_vblank_off(&dpu->base); + + sprd_dpu_fini(dpu); + + spin_lock_irq(&drm->event_lock); + if (crtc->state->event) { + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + } + spin_unlock_irq(&drm->event_lock); +} + +static void sprd_crtc_atomic_flush(struct drm_crtc *crtc, + struct drm_atomic_state *state) + +{ + struct sprd_dpu *dpu = to_sprd_crtc(crtc); + struct drm_device *drm = dpu->base.dev; + + sprd_dpu_flip(dpu); + + spin_lock_irq(&drm->event_lock); + if (crtc->state->event) { + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + } + spin_unlock_irq(&drm->event_lock); +} + +static int sprd_crtc_enable_vblank(struct drm_crtc *crtc) +{ + struct sprd_dpu *dpu = to_sprd_crtc(crtc); + + dpu_reg_set(&dpu->ctx, REG_DPU_INT_EN, BIT_DPU_INT_VSYNC); + + return 0; +} + +static void sprd_crtc_disable_vblank(struct drm_crtc *crtc) +{ + struct sprd_dpu *dpu = to_sprd_crtc(crtc); + + dpu_reg_clr(&dpu->ctx, REG_DPU_INT_EN, BIT_DPU_INT_VSYNC); +} + +static const struct drm_crtc_helper_funcs sprd_crtc_helper_funcs = { + .mode_set_nofb = sprd_crtc_mode_set_nofb, + .atomic_flush = sprd_crtc_atomic_flush, + .atomic_enable = sprd_crtc_atomic_enable, + .atomic_disable = sprd_crtc_atomic_disable, +}; + +static const struct drm_crtc_funcs sprd_crtc_funcs = { + .destroy = drm_crtc_cleanup, + .set_config = drm_atomic_helper_set_config, + .page_flip = drm_atomic_helper_page_flip, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, + .enable_vblank = sprd_crtc_enable_vblank, + .disable_vblank = sprd_crtc_disable_vblank, +}; + +static struct sprd_dpu *sprd_crtc_init(struct drm_device *drm, + struct drm_plane *primary, struct device *dev) +{ + struct device_node *port; + struct sprd_dpu *dpu; + + dpu = drmm_crtc_alloc_with_planes(drm, struct sprd_dpu, base, + primary, NULL, + &sprd_crtc_funcs, NULL); + if (IS_ERR(dpu)) { + drm_err(drm, "failed to init crtc\n"); + return dpu; + } + drm_crtc_helper_add(&dpu->base, &sprd_crtc_helper_funcs); + + /* + * set crtc port so that drm_of_find_possible_crtcs call works + */ + port = of_graph_get_port_by_id(dev->of_node, 0); + if (!port) { + drm_err(drm, "failed to found crtc output port for %s\n", + dev->of_node->full_name); + return ERR_PTR(-EINVAL); + } + dpu->base.port = port; + of_node_put(port); + + return dpu; +} + +static irqreturn_t sprd_dpu_isr(int irq, void *data) +{ + struct sprd_dpu *dpu = data; + struct dpu_context *ctx = &dpu->ctx; + u32 reg_val, int_mask = 0; + + reg_val = readl(ctx->base + REG_DPU_INT_STS); + + /* disable err interrupt */ + if (reg_val & BIT_DPU_INT_ERR) { + int_mask |= BIT_DPU_INT_ERR; + drm_warn(dpu->drm, "Warning: dpu underflow!\n"); + } + + /* dpu update done isr */ + if (reg_val & BIT_DPU_INT_UPDATE_DONE) { + ctx->evt_update = true; + wake_up_interruptible_all(&ctx->wait_queue); + } + + /* dpu stop done isr */ + if (reg_val & BIT_DPU_INT_DONE) { + ctx->evt_stop = true; + wake_up_interruptible_all(&ctx->wait_queue); + } + + if (reg_val & BIT_DPU_INT_VSYNC) + drm_crtc_handle_vblank(&dpu->base); + + int_mask |= check_mmu_isr(dpu, reg_val); + + writel(reg_val, ctx->base + REG_DPU_INT_CLR); + dpu_reg_clr(ctx, REG_DPU_INT_EN, int_mask); + + return IRQ_HANDLED; +} + +static int sprd_dpu_context_init(struct sprd_dpu *dpu, + struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dpu_context *ctx = &dpu->ctx; + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ctx->base = devm_ioremap(dev, res->start, resource_size(res)); + if (!ctx->base) { + dev_err(dev, "failed to map dpu registers\n"); + return -EFAULT; + } + + ctx->irq = platform_get_irq(pdev, 0); + if (ctx->irq < 0) { + dev_err(dev, "failed to get dpu irq\n"); + return ctx->irq; + } + + /* disable and clear interrupts before register dpu IRQ. */ + writel(0x00, ctx->base + REG_DPU_INT_EN); + writel(0xff, ctx->base + REG_DPU_INT_CLR); + + ret = devm_request_irq(dev, ctx->irq, sprd_dpu_isr, + IRQF_TRIGGER_NONE, "DPU", dpu); + if (ret) { + dev_err(dev, "failed to register dpu irq handler\n"); + return ret; + } + + init_waitqueue_head(&ctx->wait_queue); + + return 0; +} + +static int sprd_dpu_bind(struct device *dev, struct device *master, void *data) +{ + struct drm_device *drm = data; + struct sprd_dpu *dpu; + struct sprd_plane *plane; + int ret; + + plane = sprd_planes_init(drm); + if (IS_ERR(plane)) + return PTR_ERR(plane); + + dpu = sprd_crtc_init(drm, &plane->base, dev); + if (IS_ERR(dpu)) + return PTR_ERR(dpu); + + dpu->drm = drm; + dev_set_drvdata(dev, dpu); + + ret = sprd_dpu_context_init(dpu, dev); + if (ret) + return ret; + + return 0; +} + +static const struct component_ops dpu_component_ops = { + .bind = sprd_dpu_bind, +}; + +static const struct of_device_id dpu_match_table[] = { + { .compatible = "sprd,sharkl3-dpu" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, dpu_match_table); + +static int sprd_dpu_probe(struct platform_device *pdev) +{ + return component_add(&pdev->dev, &dpu_component_ops); +} + +static int sprd_dpu_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &dpu_component_ops); + + return 0; +} + +struct platform_driver sprd_dpu_driver = { + .probe = sprd_dpu_probe, + .remove = sprd_dpu_remove, + .driver = { + .name = "sprd-dpu-drv", + .of_match_table = dpu_match_table, + }, +}; + +MODULE_AUTHOR("Leon He <leon.he@unisoc.com>"); +MODULE_AUTHOR("Kevin Tang <kevin.tang@unisoc.com>"); +MODULE_DESCRIPTION("Unisoc Display Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/sprd/sprd_dpu.h b/drivers/gpu/drm/sprd/sprd_dpu.h new file mode 100644 index 000000000..157a78f24 --- /dev/null +++ b/drivers/gpu/drm/sprd/sprd_dpu.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 Unisoc Inc. + */ + +#ifndef __SPRD_DPU_H__ +#define __SPRD_DPU_H__ + +#include <linux/bug.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/string.h> +#include <video/videomode.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_print.h> +#include <drm/drm_vblank.h> +#include <uapi/drm/drm_mode.h> + +/* DPU Layer registers offset */ +#define DPU_LAY_REG_OFFSET 0x30 + +enum { + SPRD_DPU_IF_DPI, + SPRD_DPU_IF_EDPI, + SPRD_DPU_IF_LIMIT +}; + +/** + * Sprd DPU context structure + * + * @base: DPU controller base address + * @irq: IRQ number to install the handler for + * @if_type: The type of DPI interface, default is DPI mode. + * @vm: videomode structure to use for DPU and DPI initialization + * @stopped: indicates whether DPU are stopped + * @wait_queue: wait queue, used to wait for DPU shadow register update done and + * DPU stop register done interrupt signal. + * @evt_update: wait queue condition for DPU shadow register + * @evt_stop: wait queue condition for DPU stop register + */ +struct dpu_context { + void __iomem *base; + int irq; + u8 if_type; + struct videomode vm; + bool stopped; + wait_queue_head_t wait_queue; + bool evt_update; + bool evt_stop; +}; + +/** + * Sprd DPU device structure + * + * @crtc: crtc object + * @drm: A point to drm device + * @ctx: DPU's implementation specific context object + */ +struct sprd_dpu { + struct drm_crtc base; + struct drm_device *drm; + struct dpu_context ctx; +}; + +static inline struct sprd_dpu *to_sprd_crtc(struct drm_crtc *crtc) +{ + return container_of(crtc, struct sprd_dpu, base); +} + +static inline void +dpu_reg_set(struct dpu_context *ctx, u32 offset, u32 set_bits) +{ + u32 bits = readl_relaxed(ctx->base + offset); + + writel(bits | set_bits, ctx->base + offset); +} + +static inline void +dpu_reg_clr(struct dpu_context *ctx, u32 offset, u32 clr_bits) +{ + u32 bits = readl_relaxed(ctx->base + offset); + + writel(bits & ~clr_bits, ctx->base + offset); +} + +static inline u32 +layer_reg_rd(struct dpu_context *ctx, u32 offset, int index) +{ + u32 layer_offset = offset + index * DPU_LAY_REG_OFFSET; + + return readl(ctx->base + layer_offset); +} + +static inline void +layer_reg_wr(struct dpu_context *ctx, u32 offset, u32 cfg_bits, int index) +{ + u32 layer_offset = offset + index * DPU_LAY_REG_OFFSET; + + writel(cfg_bits, ctx->base + layer_offset); +} + +void sprd_dpu_run(struct sprd_dpu *dpu); +void sprd_dpu_stop(struct sprd_dpu *dpu); + +#endif diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c index 6b00a6f27..549b71278 100644 --- a/drivers/gpu/drm/sprd/sprd_drm.c +++ b/drivers/gpu/drm/sprd/sprd_drm.c @@ -182,6 +182,7 @@ static struct platform_driver sprd_drm_driver = { static struct platform_driver *sprd_drm_drivers[] = { &sprd_drm_driver, + &sprd_dpu_driver, }; static int __init sprd_drm_init(void) diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h index 9781fd591..85d4a8b9f 100644 --- a/drivers/gpu/drm/sprd/sprd_drm.h +++ b/drivers/gpu/drm/sprd/sprd_drm.h @@ -13,4 +13,6 @@ struct sprd_drm { struct drm_device drm; }; +extern struct platform_driver sprd_dpu_driver; + #endif /* _SPRD_DRM_H_ */
Adds DPU(Display Processor Unit) support for the Unisoc's display subsystem. It's support multi planes, scaler, rotation, PQ(Picture Quality) and more. v2: - Use drm_xxx to replace all DRM_XXX. - Use kzalloc to replace devm_kzalloc for sprd_dpu structure init. v3: - Remove dpu_layer stuff layer and commit layers by aotmic_update v4: - Use drmm_helpers to allocate crtc and planes. - Move rotation enum definitions to crtc layer reg bitfields. - Move allocate crtc and planes to bind function. v5: - Fix the checkpatch warnings. - Use mode_set_nofb instead of mode_valid callback. - Follow the OF-Graph bindings, use of_graph_get_port_by_id instead of of_parse_phandle. - Use zpos to represent the layer position. - Rebase to last drm misc branch. v6: - Disable and clear interrupts before register dpu IRQ - Init dpi config used by crtc_state->adjusted_mode on mode_set_nofb - Remove enable_irq and disable_irq function call. - Remove drm_format_info function call. Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Kevin Tang <kevin.tang@unisoc.com> --- drivers/gpu/drm/sprd/Kconfig | 1 + drivers/gpu/drm/sprd/Makefile | 3 +- drivers/gpu/drm/sprd/sprd_dpu.c | 937 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/sprd/sprd_dpu.h | 109 ++++ drivers/gpu/drm/sprd/sprd_drm.c | 1 + drivers/gpu/drm/sprd/sprd_drm.h | 2 + 6 files changed, 1052 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h