diff mbox series

leds: lp50xx: Fix bank enable mask

Message ID 20210828214253.16207-1-donovancarldrews@gmail.com
State Superseded
Headers show
Series leds: lp50xx: Fix bank enable mask | expand

Commit Message

DonDrews Aug. 28, 2021, 9:42 p.m. UTC
Fixes an issue where previously 0 is used as a sentinel when
	moving device tree configuration into the bank enable mask. This
	prevented the first LED from being added to bank control.

Signed-off-by: DonDrews <donovancarldrews@gmail.com>
---
 drivers/leds/leds-lp50xx.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

Comments

Pavel Machek Sept. 13, 2021, 9:16 a.m. UTC | #1
On Sun 2021-09-12 13:54:26, Donovan Drews wrote:
> Just bumping this patch in case it was overlooked.


Please don't. Patches are not usually merged during the -rc1 time.

Best regards,
								Pavel

> On Sat, Aug 28, 2021 at 2:43 PM DonDrews <donovancarldrews@gmail.com> wrote:

> 

> >         Fixes an issue where previously 0 is used as a sentinel when

> >         moving device tree configuration into the bank enable mask. This

> >         prevented the first LED from being added to bank control.

> >

> > Signed-off-by: DonDrews <donovancarldrews@gmail.com>

> > ---

> >  drivers/leds/leds-lp50xx.c | 10 ++++------

> >  1 file changed, 4 insertions(+), 6 deletions(-)

> >

> > diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c

> > index 401df1e2e05d..45f56caea182 100644

> > --- a/drivers/leds/leds-lp50xx.c

> > +++ b/drivers/leds/leds-lp50xx.c

> > @@ -347,17 +347,15 @@ static int lp50xx_brightness_set(struct led_classdev

> > *cdev,

> >         return ret;

> >  }

> >

> > -static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])

> > +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[], int

> > num_leds)

> >  {

> >         u8 led_config_lo, led_config_hi;

> >         u32 bank_enable_mask = 0;

> >         int ret;

> >         int i;

> >

> > -       for (i = 0; i < priv->chip_info->max_modules; i++) {

> > -               if (led_banks[i])

> > -                       bank_enable_mask |= (1 << led_banks[i]);

> > -       }

> > +       for (i = 0; i < num_leds; i++)

> > +               bank_enable_mask |= (1 << led_banks[i]);

> >

> >         led_config_lo = bank_enable_mask;

> >         led_config_hi = bank_enable_mask >> 8;

> > @@ -413,7 +411,7 @@ static int lp50xx_probe_leds(struct fwnode_handle

> > *child, struct lp50xx *priv,

> >                         return ret;

> >                 }

> >

> > -               ret = lp50xx_set_banks(priv, led_banks);

> > +               ret = lp50xx_set_banks(priv, led_banks, num_leds);

> >                 if (ret) {

> >                         dev_err(priv->dev, "Cannot setup banked LEDs\n");

> >                         return ret;

> > --

> > 2.17.1

> >

> >


-- 
http://www.livejournal.com/~pavelmachek
Pavel Machek Sept. 14, 2021, 9:16 a.m. UTC | #2
Hi!

> > Just bumping this patch in case it was overlooked.

> 

> Please don't. Patches are not usually merged during the -rc1 time.

> 

> Best regards,

> 								Pavel

> 

> > On Sat, Aug 28, 2021 at 2:43 PM DonDrews <donovancarldrews@gmail.com> wrote:

> > 

> > >         Fixes an issue where previously 0 is used as a sentinel when

> > >         moving device tree configuration into the bank enable mask. This

> > >         prevented the first LED from being added to bank control.


Remove whitespace at the start of the line.

> > > Signed-off-by: DonDrews <donovancarldrews@gmail.com>


And I'll need your full name here.

Fixes: tag if you want this to go to stable would not hurt.

Otherwise looks good.

Best regards,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek
diff mbox series

Patch

diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
index 401df1e2e05d..45f56caea182 100644
--- a/drivers/leds/leds-lp50xx.c
+++ b/drivers/leds/leds-lp50xx.c
@@ -347,17 +347,15 @@  static int lp50xx_brightness_set(struct led_classdev *cdev,
 	return ret;
 }
 
-static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
+static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[], int num_leds)
 {
 	u8 led_config_lo, led_config_hi;
 	u32 bank_enable_mask = 0;
 	int ret;
 	int i;
 
-	for (i = 0; i < priv->chip_info->max_modules; i++) {
-		if (led_banks[i])
-			bank_enable_mask |= (1 << led_banks[i]);
-	}
+	for (i = 0; i < num_leds; i++)
+		bank_enable_mask |= (1 << led_banks[i]);
 
 	led_config_lo = bank_enable_mask;
 	led_config_hi = bank_enable_mask >> 8;
@@ -413,7 +411,7 @@  static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv,
 			return ret;
 		}
 
-		ret = lp50xx_set_banks(priv, led_banks);
+		ret = lp50xx_set_banks(priv, led_banks, num_leds);
 		if (ret) {
 			dev_err(priv->dev, "Cannot setup banked LEDs\n");
 			return ret;