Message ID | 1629282424-4070-1-git-send-email-mkrishn@codeaurora.org |
---|---|
State | New |
Headers | show |
Series | [v1,1/4] dt-bindings: msm: add DT bindings for sc7280 | expand |
On Wed, 18 Aug 2021 15:57:01 +0530, Krishna Manikandan wrote: > MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI, EDP etc. Add required DPU > device tree bindings for SC7280. > > Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> > --- > .../bindings/display/msm/dpu-sc7280.yaml | 228 +++++++++++++++++++++ > 1 file changed, 228 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/msm/dpu-sc7280.example.dts:19:18: fatal error: dt-bindings/clock/qcom,dispcc-sc7280.h: No such file or directory 19 | #include <dt-bindings/clock/qcom,dispcc-sc7280.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/display/msm/dpu-sc7280.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1419: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1517976 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Wed, Aug 18, 2021 at 03:57:04PM +0530, Krishna Manikandan wrote: > From: Sankeerth Billakanti <sbillaka@codeaurora.org> > > Add edp controller and phy DT nodes for sc7280. > > Signed-off-by: Sankeerth Billakanti <sbillaka@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 127 ++++++++++++++++++++++++++++++++++- > 1 file changed, 126 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index aadf55d..5be318e 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -1412,7 +1412,7 @@ > reg = <0 0xaf00000 0 0x20000>; > clocks = <&rpmhcc RPMH_CXO_CLK>, > <&gcc GCC_DISP_GPLL0_CLK_SRC>, > - <0>, <0>, <0>, <0>, <0>, <0>; > + <0>, <0>, <0>, <0>, <&edp_phy 0>, <&edp_phy 1>; > clock-names = "bi_tcxo", "gcc_disp_gpll0_clk", > "dsi0_phy_pll_out_byteclk", > "dsi0_phy_pll_out_dsiclk", > @@ -1493,6 +1493,12 @@ > remote-endpoint = <&dsi0_in>; > }; > }; > + port@1 { > + reg = <1>; > + dpu_intf5_out: endpoint { > + remote-endpoint = <&edp_in>; > + }; > + }; > }; > > mdp_opp_table: mdp-opp-table { > @@ -1608,6 +1614,101 @@ > > status = "disabled"; > }; > + > + msm_edp: edp@aea0000 { > + status = "disabled"; > + compatible = "qcom,sc7280-edp"; > + reg = <0 0xaea0000 0 0x200>, > + <0 0xaea0200 0 0x200>, > + <0 0xaea0400 0 0xc00>, > + <0 0xaea1000 0 0x400>; > + > + interrupt-parent = <&mdss>; > + interrupts = <14 IRQ_TYPE_NONE>; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_EDP_CLKREF_EN>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, > + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, > + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; > + clock-names = "core_xo", "core_ref", > + "core_iface", "core_aux", "ctrl_link", > + "ctrl_link_iface", "stream_pixel"; > + #clock-cells = <1>; > + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; > + assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>; > + > + phys = <&edp_phy>; > + phy-names = "dp"; > + > + vdda-1p2-supply = <&vreg_l6b_1p2>; > + vdda-0p9-supply = <&vreg_l10c_0p8>; These regulators are defined in the board .dts (sc7280-idp.dts), hence the SoC .dtsi shouldn't depend on them. My impression is that pm7325.dtsi and pm8350c.dtsi should include definitions for regulators that supply basic SoC blocks. If the configuration can vary depending on the SoC there could be SoC specific includes for each PMIC. If a board uses a different configuration it could overwrite the PMIC .dtsi settings. > + operating-points-v2 = <&edp_opp_table>; > + power-domains = <&rpmhpd SC7280_CX>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&edp_hot_plug_det>, <&edp_panel_power_on>; > + > + panel-bklt-gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; > + panel-pwm-gpio = <&pm8350c_gpios 8 GPIO_ACTIVE_HIGH>; The pins are board specific, hence they shouldn't be configured in the .dtsi of the SoC. > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + edp_in: endpoint { > + remote-endpoint = <&dpu_intf5_out>; > + }; > + }; > + }; > + > + edp_opp_table: edp-opp-table { > + compatible = "operating-points-v2"; > + > + opp-160000000 { > + opp-hz = /bits/ 64 <160000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-270000000 { > + opp-hz = /bits/ 64 <270000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-540000000 { > + opp-hz = /bits/ 64 <540000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + > + opp-810000000 { > + opp-hz = /bits/ 64 <810000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + > + edp_phy: phy@aec2000 { > + status = "disabled"; > + compatible = "qcom,sc7280-edp-phy"; > + reg = <0 0xaec2a00 0 0x19c>, > + <0 0xaec2200 0 0xa0>, > + <0 0xaec2600 0 0xa0>, > + <0 0xaec2000 0 0x1c0>; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_EDP_CLKREF_EN>; > + clock-names = "aux", "cfg_ahb"; > + > + vdda-pll-supply = <&vreg_l6b_1p2>; > + vdda-phy-supply = <&vreg_l10c_0p8>; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + }; > }; > > pdc: interrupt-controller@b220000 { > @@ -1704,6 +1805,30 @@ > function = "qup13"; > }; > > + edp_hot_plug_det: edp-hot-plug-det { > + pinmux { > + pins = "gpio60"; > + function = "edp_hot"; > + }; > + pinconf { > + pins = "gpio60"; > + bias-pull-down; > + input-enable; > + }; There should be no separate 'pinmux' and 'pinconf' nodes, see other entries in this section. > + }; > + > + edp_panel_power_on: edp-panel-power-on { > + pinmux { > + pins = "gpio80"; > + function = "gpio"; > + }; > + pinconf { > + pins = "gpio80"; > + bias-disable; > + output-high; > + }; > + }; IIUC this could be any GPIO and hence should be configured by the board file.
On Wed, Aug 18, 2021 at 03:57:03PM +0530, Krishna Manikandan wrote: > From: Rajeev Nandan <rajeevny@codeaurora.org> > > Add DSI controller and PHY nodes for sc7280. > > Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> You should sign off patches you send, even if you aren't the original author. > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 101 +++++++++++++++++++++++++++++++++++ > 1 file changed, 101 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index fd7ff1c..aadf55d 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -1483,6 +1483,18 @@ > > status = "disabled"; > > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + }; > + > mdp_opp_table: mdp-opp-table { > compatible = "operating-points-v2"; > > @@ -1507,6 +1519,95 @@ > }; > }; > }; > + > + dsi0: dsi@ae94000 { > + compatible = "qcom,mdss-dsi-ctrl"; > + reg = <0 0x0ae94000 0 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + > + operating-points-v2 = <&dsi_opp_table>; > + power-domains = <&rpmhpd SC7280_CX>; > + > + phys = <&dsi_phy>; > + phy-names = "dsi"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&dpu_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + }; > + }; > + }; > + > + dsi_opp_table: dsi-opp-table { > + compatible = "operating-points-v2"; > + > + opp-187500000 { > + opp-hz = /bits/ 64 <187500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-358000000 { > + opp-hz = /bits/ 64 <358000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + }; > + }; > + > + dsi_phy: dsi-phy@ae94400 { > + compatible = "qcom,sc7280-dsi-phy-7nm"; > + reg = <0 0x0ae94400 0 0x200>, > + <0 0x0ae94600 0 0x280>, > + <0 0x0ae94900 0 0x280>; > + reg-names = "dsi_phy", > + "dsi_phy_lane", > + "dsi_pll"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&rpmhcc RPMH_CXO_CLK>; > + clock-names = "iface", "ref"; > + > + status = "disabled"; > + }; I'm not an expect, but this looks sane to me and it's very similar to the SC7180 config. Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Quoting Krishna Manikandan (2021-08-18 03:27:01) > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml > new file mode 100644 > index 0000000..3d256c0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml > @@ -0,0 +1,228 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Display DPU dt properties for SC7280 target Drop "target"? > + > +maintainers: > + - Krishna Manikandan <mkrishn@codeaurora.org> > + > +description: | > + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates Space after Subsystem please. > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > + bindings of MDSS and DPU are mentioned for SC7280 target. Drop "target"? > + > +properties: > + compatible: > + items: Will there be anymore? If not, drop items and only have const. > + - const: qcom,sc7280-mdss > + > + reg: > + maxItems: 1 > + > + reg-names: > + const: mdss > + > + power-domains: > + maxItems: 1 > + > + clocks: > + items: > + - description: Display AHB clock from gcc > + - description: Display AHB clock from dispcc > + - description: Display core clock > + > + clock-names: > + items: > + - const: iface > + - const: ahb > + - const: core > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + "#address-cells": true > + > + "#size-cells": true > + > + "#interrupt-cells": > + const: 1 > + > + iommus: > + items: > + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 > + > + ranges: true > + > + interconnects: > + items: > + - description: Interconnect path specifying the port ids for data bus > + > + interconnect-names: > + const: mdp0-mem > + > +patternProperties: > + "^display-controller@[0-9a-f]+$": > + type: object > + description: Node containing the properties of DPU. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7280-dpu Will there be anymore? If not, drop items and only have const. > + > + reg: > + items: > + - description: Address offset and size for mdp register set > + - description: Address offset and size for vbif register set > + > + reg-names: > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + items: > + - description: Display hf axi clock > + - description: Display sf axi clock > + - description: Display ahb clock > + - description: Display lut clock > + - description: Display core clock > + - description: Display vsync clock > + > + clock-names: > + items: > + - const: bus > + - const: nrt_bus > + - const: iface > + - const: lut > + - const: core > + - const: vsync > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + operating-points-v2: true > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPU_INTF1 (DSI) > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: DPU_INTF5 (EDP) > + > + required: > + - port@0 > + > + required: > + - compatible > + - reg > + - reg-names > + - clocks > + - interrupts > + - power-domains > + - operating-points-v2 > + - ports > + > +required: > + - compatible > + - reg > + - reg-names > + - power-domains > + - clocks > + - interrupts > + - interrupt-controller > + - iommus > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> > + #include <dt-bindings/clock/qcom,gcc-sc7280.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interconnect/qcom,sc7280.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + display-subsystem@ae00000 { Maybe just 'subsystem' as that is generic enough. > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "qcom,sc7280-mdss"; > + reg = <0xae00000 0x1000>; > + reg-names = "mdss"; > + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "ahb", "core"; Can these names be one per line? It makes it easier to match to the clocks property above. > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; > + interconnect-names = "mdp0-mem"; > + > + iommus = <&apps_smmu 0x900 0x402>; > + ranges; > + > + display-controller@ae01000 { > + compatible = "qcom,sc7280-dpu"; > + reg = <0x0ae01000 0x8f000>, > + <0x0aeb0000 0x2008>; > + > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", "nrt_bus", "iface", "lut", "core", > + "vsync"; Can these names be one per line? It makes it easier to match to the clocks property above. > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + power-domains = <&rpmhpd SC7280_CX>; > + operating-points-v2 = <&mdp_opp_table>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; Tabbed one too many times. > + }; > + }; > + > + port@1 { > + reg = <1>; > + dpu_intf5_out: endpoint { > + remote-endpoint = <&edp_in>; Tabbed one too many times. > + }; > + }; > + }; > + }; > + };
Quoting Krishna Manikandan (2021-08-18 03:27:01) > MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks > like DPU display controller, DSI, EDP etc. Add required DPU > device tree bindings for SC7280. > > Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> > --- Please send a cover-letter next time. Do you have the display port dts bits and driver code ready too? Can it be part of this patch series?
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml new file mode 100644 index 0000000..3d256c0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for SC7280 target + +maintainers: + - Krishna Manikandan <mkrishn@codeaurora.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for SC7280 target. + +properties: + compatible: + items: + - const: qcom,sc7280-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock + + clock-names: + items: + - const: iface + - const: ahb + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,sc7280-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display hf axi clock + - description: Display sf axi clock + - description: Display ahb clock + - description: Display lut clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: bus + - const: nrt_bus + - const: iface + - const: lut + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF5 (EDP) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-sc7280.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sc7280.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,sc7280-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "ahb", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "nrt_bus", "iface", "lut", "core", + "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&mdp_opp_table>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + }; + }; + }; +...
MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks like DPU display controller, DSI, EDP etc. Add required DPU device tree bindings for SC7280. Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> --- .../bindings/display/msm/dpu-sc7280.yaml | 228 +++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml