| Message ID | 20210809085213.324129-1-chaochao2021666@163.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] dt-bindings:dp83867:Add binding for the status led | expand |
On Mon, Aug 09, 2021 at 04:52:13PM +0800, chaochao2021666@163.com wrote: > From: Chao Zeng <chao.zeng@siemens.com> > > The phy status led of each of board maybe different. > Provide a method to custom phy status led behavior. > > Datasheet: > http://www.ti.com/product/DP83867IR/datasheet > > Signed-off-by: Chao Zeng <chao.zeng@siemens.com> > --- > .../devicetree/bindings/net/ti,dp83867.yaml | 6 ++++++ > include/dt-bindings/net/ti-dp83867.h | 18 ++++++++++++++++++ > 2 files changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml > index 047d757e8d82..a46a437818f2 100644 > --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml > +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml > @@ -106,6 +106,12 @@ properties: > Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable > values. > > + ti,led-sel: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + This configure the status led. See dt-bindings/net/ti-dp83867.h > + for different status led settings,select different configures There's ongoing discussions about using the LED bindings/subsystem for this type of LED. Rob
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 047d757e8d82..a46a437818f2 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -106,6 +106,12 @@ properties: Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values. + ti,led-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + This configure the status led. See dt-bindings/net/ti-dp83867.h + for different status led settings,select different configures + required: - reg diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h index 6fc4b445d3a1..de59c3a42c1e 100644 --- a/include/dt-bindings/net/ti-dp83867.h +++ b/include/dt-bindings/net/ti-dp83867.h @@ -48,6 +48,24 @@ #define DP83867_CLK_O_SEL_CHN_C_TCLK 0xA #define DP83867_CLK_O_SEL_CHN_D_TCLK 0xB #define DP83867_CLK_O_SEL_REF_CLK 0xC + +/* Led configuration flag*/ +#define DP83867_LINK_ESTABLISHED 0x0 +#define DP83867_RECEIVE_TRANSMIT_ACTIVITY 0x1 +#define DP83867_TRANSMIT_ACTIVITY 0x2 +#define DP83867_RECEIVE_ACTIVITY 0x3 +#define DP83867_COLLISION_DETECTED 0x4 +#define DP83867_LINK_ESTABLISHED_1000BT 0x5 +#define DP83867_LINK_ESTABLISHED_100BTX 0x6 +#define DP83867_LINK_ESTABLISHED_10BT 0x7 +#define DP83867_LINK_ESTABLISHED_10_100_BT 0x8 +#define DP83867_LINK_ESTABLISHED_100_1000_BT 0x9 +#define DP83867_FULL_DUPLEX 0xA +#define DP83867_LINK_ESTABLISHED_BLINK_TRANSMIT_RECEIVE 0xB +#define DP83867_RESERVED 0xC +#define DP83867_RECEIVE_TRANSMIT_ERROR 0xD +#define DP83867_RECEIVE_ERROR 0xE + /* Special flag to indicate clock should be off */ #define DP83867_CLK_O_SEL_OFF 0xFFFFFFFF #endif