| Message ID | 1628618483-664-1-git-send-email-pillair@codeaurora.org |
|---|---|
| Headers | show |
| Series | Add support for sc7280 WPSS PIL loading | expand |
On Tue, 10 Aug 2021 23:31:22 +0530, Rakesh Pillai wrote: > Add WPSS PIL loading support for SC7280 SoCs. > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > --- > .../bindings/remoteproc/qcom,hexagon-v56.yaml | 79 ++++++++++++++++++++-- > 1 file changed, 74 insertions(+), 5 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.example.dt.yaml: remoteproc@17300000: 'power-domain-names' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1515482 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Tue, Aug 10, 2021 at 11:31:22PM +0530, Rakesh Pillai wrote: > Add WPSS PIL loading support for SC7280 SoCs. > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > --- > .../bindings/remoteproc/qcom,hexagon-v56.yaml | 79 ++++++++++++++++++++-- > 1 file changed, 74 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml > index 5f3558e..9ae433c6 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml > @@ -17,6 +17,7 @@ properties: > compatible: > enum: > - qcom,qcs404-cdsp-pil > + - qcom,sc7280-wpss-pil > - qcom,sdm845-adsp-pil > > reg: > @@ -26,25 +27,30 @@ properties: > > interrupts-extended: > minItems: 5 > - maxItems: 5 > + maxItems: 6 > > interrupt-names: > minItems: 5 > - maxItems: 5 > + maxItems: 6 > > clocks: > - minItems: 7 > + minItems: 3 Patch 1 shows 3 clocks are valid... > maxItems: 8 > description: > List of phandles and clock specifier pairs for the Hexagon, > per clock-names below. > > clock-names: > - minItems: 7 > + minItems: 3 > maxItems: 8 > > power-domains: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > + > + power-domain-names: > + minItems: 1 > + maxItems: 2 > > resets: > minItems: 1 > @@ -92,6 +98,7 @@ required: > - clocks > - clock-names > - power-domains > + - power-domain-names It's not backwards compatible to add a required property. > - qcom,halt-regs > - memory-region > - qcom,smem-states > @@ -129,6 +136,31 @@ allOf: > compatible: > contains: > enum: > + - qcom,sc7280-wpss-pil > + then: > + properties: > + interrupts-extended: > + items: > + - description: Watchdog interrupt > + - description: Fatal interrupt > + - description: Ready interrupt > + - description: Handover interrupt > + - description: Stop acknowledge interrupt > + - description: Shutdown acknowledge interrupt > + interrupt-names: > + items: > + - const: wdog > + - const: fatal > + - const: ready > + - const: handover > + - const: stop-ack > + - const: shutdown-ack The items lists can go in the main section with 'minItems: 5' and just 'minItems: 6' here. > + > + - if: > + properties: > + compatible: > + contains: > + enum: > - qcom,sdm845-adsp-pil > then: > properties: > @@ -211,6 +243,26 @@ allOf: > power-domains: > items: > - description: CX power domain > + power-domain-names: > + items: > + - const: cx > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sc7280-wpss-pil > + then: > + properties: > + power-domains: > + items: > + - description: CX power domain > + - description: MX power domain > + power-domain-names: > + items: > + - const: cx > + - const: mx As 'cx' is always the first entry, the 'items' lists here can be moved to the main section and you just need minItems or maxItems in the if/then. > > - if: > properties: > @@ -244,6 +296,23 @@ allOf: > items: > - const: restart > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sc7280-wpss-pil > + then: > + properties: > + resets: > + items: > + - description: AOSS restart > + - description: PDC SYNC > + reset-names: > + items: > + - const: restart > + - const: pdc_sync > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > -- > 2.7.4 > >
> -----Original Message----- > From: Rob Herring <robh@kernel.org> > Sent: Wednesday, August 11, 2021 10:55 PM > To: Rakesh Pillai <pillair@codeaurora.org> > Cc: robh+dt@kernel.org; sibis@codeaurora.org; sboyd@kernel.org; > bjorn.andersson@linaro.org; agross@kernel.org; linux- > kernel@vger.kernel.org; devicetree@vger.kernel.org; > mpubbise@codeaurora.org; linux-arm-msm@vger.kernel.org > Subject: Re: [PATCH v2 2/3] dt-bindings: remoteproc: qcom: Add SC7280 > WPSS support > > On Tue, 10 Aug 2021 23:31:22 +0530, Rakesh Pillai wrote: > > Add WPSS PIL loading support for SC7280 SoCs. > > > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > > --- > > .../bindings/remoteproc/qcom,hexagon-v56.yaml | 79 > ++++++++++++++++++++-- > > 1 file changed, 74 insertions(+), 5 deletions(-) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m > dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/linux-dt- > review/Documentation/devicetree/bindings/remoteproc/qcom,hexagon- > v56.example.dt.yaml: remoteproc@17300000: 'power-domain-names' is a > required property > From schema: /builds/robherring/linux-dt- > review/Documentation/devicetree/bindings/remoteproc/qcom,hexagon- > v56.yaml > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/patch/1515482 > > This check can fail if there are any dependencies. The base for a patch series > is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above error(s), > then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. Thanks Rob, I will submit next patchset for this and fix the issues.