new file mode 100644
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed PECI Bus Device Tree Bindings
+
+maintainers:
+ - Iwona Winiarska <iwona.winiarska@intel.com>
+ - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+allOf:
+ - $ref: peci-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-peci
+ - aspeed,ast2500-peci
+ - aspeed,ast2600-peci
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ Clock source for PECI controller. Should reference the external
+ oscillator clock.
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ cmd-timeout-ms:
+ minimum: 1
+ maximum: 1000
+ default: 1000
+
+ aspeed,clock-divider:
+ description:
+ This value determines PECI controller internal clock dividing
+ rate. The divider will be calculated as 2 raised to the power of
+ the given value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ default: 0
+
+ aspeed,msg-timing:
+ description:
+ Message timing negotiation period. This value will determine the period
+ of message timing negotiation to be issued by PECI controller. The unit
+ of the programmed value is four times of PECI clock period.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 1
+
+ aspeed,addr-timing:
+ description:
+ Address timing negotiation period. This value will determine the period
+ of address timing negotiation to be issued by PECI controller. The unit
+ of the programmed value is four times of PECI clock period.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+ default: 1
+
+ aspeed,rd-sampling-point:
+ description:
+ Read sampling point selection. The whole period of a bit time will be
+ divided into 16 time frames. This value will determine the time frame
+ in which the controller will sample PECI signal for data read back.
+ Usually in the middle of a bit time is the best.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 8
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/ast2600-clock.h>
+ peci-controller@1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ aspeed,clock-divider = <0>;
+ aspeed,msg-timing = <1>;
+ aspeed,addr-timing = <1>;
+ aspeed,rd-sampling-point = <8>;
+ };
+...