diff mbox series

[v2,2/4] clk: qcom: a53pll/mux: Use unique clock name

Message ID 20210704024032.11559-3-shawn.guo@linaro.org
State Accepted
Commit 05cc560c8cb4c2fe39022c1f397125470b28705c
Headers show
Series Add MSM8939 APCS/A53PLL clock support | expand

Commit Message

Shawn Guo July 4, 2021, 2:40 a.m. UTC
Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets
three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache
Coherent Interconnect).  That said, a53pll/mux clock needs to be named
uniquely.  Append @unit-address of device node to the clock name, so
that a53pll/mux will be named like below on MSM8939.

  a53pll@b016000
  a53pll@b116000
  a53pll@b1d0000

  a53mux@b1d1000
  a53mux@b011000
  a53mux@b111000

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/qcom/a53-pll.c      | 8 +++++++-
 drivers/clk/qcom/apcs-msm8916.c | 8 +++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

Comments

Bjorn Andersson July 10, 2021, 5:17 a.m. UTC | #1
On Sat 03 Jul 21:40 CDT 2021, Shawn Guo wrote:

> Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets

> three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache

> Coherent Interconnect).  That said, a53pll/mux clock needs to be named

> uniquely.  Append @unit-address of device node to the clock name, so

> that a53pll/mux will be named like below on MSM8939.

> 

>   a53pll@b016000

>   a53pll@b116000

>   a53pll@b1d0000

> 

>   a53mux@b1d1000

>   a53mux@b011000

>   a53mux@b111000

> 

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

>  drivers/clk/qcom/a53-pll.c      | 8 +++++++-

>  drivers/clk/qcom/apcs-msm8916.c | 8 +++++++-

>  2 files changed, 14 insertions(+), 2 deletions(-)

> 

> diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c

> index d6756bd777ce..96a118be912d 100644

> --- a/drivers/clk/qcom/a53-pll.c

> +++ b/drivers/clk/qcom/a53-pll.c

> @@ -37,6 +37,7 @@ static const struct regmap_config a53pll_regmap_config = {

>  static int qcom_a53pll_probe(struct platform_device *pdev)

>  {

>  	struct device *dev = &pdev->dev;

> +	struct device_node *np = dev->of_node;

>  	struct regmap *regmap;

>  	struct resource *res;

>  	struct clk_pll *pll;

> @@ -66,7 +67,12 @@ static int qcom_a53pll_probe(struct platform_device *pdev)

>  	pll->status_bit = 16;

>  	pll->freq_tbl = a53pll_freq;

>  

> -	init.name = "a53pll";

> +	/* Use an unique name by appending @unit-address */

> +	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53pll%s",

> +				   strchrnul(np->full_name, '@'));


While the result is nice, this isn't...

Is your dev_name() reasonable? What about "%s:a53pll", dev_name(dev) ?

Regards,
Bjorn

> +	if (!init.name)

> +		return -ENOMEM;

> +

>  	init.parent_names = (const char *[]){ "xo" };

>  	init.num_parents = 1;

>  	init.ops = &clk_pll_sr2_ops;

> diff --git a/drivers/clk/qcom/apcs-msm8916.c b/drivers/clk/qcom/apcs-msm8916.c

> index d7ac6d6b15b6..89e0730810ac 100644

> --- a/drivers/clk/qcom/apcs-msm8916.c

> +++ b/drivers/clk/qcom/apcs-msm8916.c

> @@ -46,6 +46,7 @@ static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)

>  {

>  	struct device *dev = &pdev->dev;

>  	struct device *parent = dev->parent;

> +	struct device_node *np = parent->of_node;

>  	struct clk_regmap_mux_div *a53cc;

>  	struct regmap *regmap;

>  	struct clk_init_data init = { };

> @@ -61,7 +62,12 @@ static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)

>  	if (!a53cc)

>  		return -ENOMEM;

>  

> -	init.name = "a53mux";

> +	/* Use an unique name by appending parent's @unit-address */

> +	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53mux%s",

> +				   strchrnul(np->full_name, '@'));

> +	if (!init.name)

> +		return -ENOMEM;

> +

>  	init.parent_data = pdata;

>  	init.num_parents = ARRAY_SIZE(pdata);

>  	init.ops = &clk_regmap_mux_div_ops;

> -- 

> 2.17.1

>
Shawn Guo July 10, 2021, 7:34 a.m. UTC | #2
On Sat, Jul 10, 2021 at 12:17:33AM -0500, Bjorn Andersson wrote:
> On Sat 03 Jul 21:40 CDT 2021, Shawn Guo wrote:

> 

> > Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets

> > three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache

> > Coherent Interconnect).  That said, a53pll/mux clock needs to be named

> > uniquely.  Append @unit-address of device node to the clock name, so

> > that a53pll/mux will be named like below on MSM8939.

> > 

> >   a53pll@b016000

> >   a53pll@b116000

> >   a53pll@b1d0000

> > 

> >   a53mux@b1d1000

> >   a53mux@b011000

> >   a53mux@b111000

> > 

> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> > ---

> >  drivers/clk/qcom/a53-pll.c      | 8 +++++++-

> >  drivers/clk/qcom/apcs-msm8916.c | 8 +++++++-

> >  2 files changed, 14 insertions(+), 2 deletions(-)

> > 

> > diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c

> > index d6756bd777ce..96a118be912d 100644

> > --- a/drivers/clk/qcom/a53-pll.c

> > +++ b/drivers/clk/qcom/a53-pll.c

> > @@ -37,6 +37,7 @@ static const struct regmap_config a53pll_regmap_config = {

> >  static int qcom_a53pll_probe(struct platform_device *pdev)

> >  {

> >  	struct device *dev = &pdev->dev;

> > +	struct device_node *np = dev->of_node;

> >  	struct regmap *regmap;

> >  	struct resource *res;

> >  	struct clk_pll *pll;

> > @@ -66,7 +67,12 @@ static int qcom_a53pll_probe(struct platform_device *pdev)

> >  	pll->status_bit = 16;

> >  	pll->freq_tbl = a53pll_freq;

> >  

> > -	init.name = "a53pll";

> > +	/* Use an unique name by appending @unit-address */

> > +	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53pll%s",

> > +				   strchrnul(np->full_name, '@'));

> 

> While the result is nice, this isn't...

> 

> Is your dev_name() reasonable? What about "%s:a53pll", dev_name(dev) ?


dev_name() is somehow reasonable for a53pll.

  b016000.clock-controller:a53pll
  b116000.clock-controller:a53pll
  b1d0000.clock-controller:a53pll

But I prefer to the existing names, because I would like to use the same
naming schema for both a53pll and a53mux.  If using dev_name() on a53mux,
we will get the following which is less reasonable.

  qcom-apcs-msm8916-clk.1.auto:a53mux
  qcom-apcs-msm8916-clk.2.auto:a53mux
  qcom-apcs-msm8916-clk.3.auto:a53mux

Shawn
Stephen Boyd Aug. 6, 2021, 1:53 a.m. UTC | #3
Quoting Shawn Guo (2021-07-03 19:40:30)
> Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets
> three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache
> Coherent Interconnect).  That said, a53pll/mux clock needs to be named
> uniquely.  Append @unit-address of device node to the clock name, so
> that a53pll/mux will be named like below on MSM8939.
> 
>   a53pll@b016000
>   a53pll@b116000
>   a53pll@b1d0000
> 
>   a53mux@b1d1000
>   a53mux@b011000
>   a53mux@b111000
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
index d6756bd777ce..96a118be912d 100644
--- a/drivers/clk/qcom/a53-pll.c
+++ b/drivers/clk/qcom/a53-pll.c
@@ -37,6 +37,7 @@  static const struct regmap_config a53pll_regmap_config = {
 static int qcom_a53pll_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
 	struct regmap *regmap;
 	struct resource *res;
 	struct clk_pll *pll;
@@ -66,7 +67,12 @@  static int qcom_a53pll_probe(struct platform_device *pdev)
 	pll->status_bit = 16;
 	pll->freq_tbl = a53pll_freq;
 
-	init.name = "a53pll";
+	/* Use an unique name by appending @unit-address */
+	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53pll%s",
+				   strchrnul(np->full_name, '@'));
+	if (!init.name)
+		return -ENOMEM;
+
 	init.parent_names = (const char *[]){ "xo" };
 	init.num_parents = 1;
 	init.ops = &clk_pll_sr2_ops;
diff --git a/drivers/clk/qcom/apcs-msm8916.c b/drivers/clk/qcom/apcs-msm8916.c
index d7ac6d6b15b6..89e0730810ac 100644
--- a/drivers/clk/qcom/apcs-msm8916.c
+++ b/drivers/clk/qcom/apcs-msm8916.c
@@ -46,6 +46,7 @@  static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device *parent = dev->parent;
+	struct device_node *np = parent->of_node;
 	struct clk_regmap_mux_div *a53cc;
 	struct regmap *regmap;
 	struct clk_init_data init = { };
@@ -61,7 +62,12 @@  static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)
 	if (!a53cc)
 		return -ENOMEM;
 
-	init.name = "a53mux";
+	/* Use an unique name by appending parent's @unit-address */
+	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53mux%s",
+				   strchrnul(np->full_name, '@'));
+	if (!init.name)
+		return -ENOMEM;
+
 	init.parent_data = pdata;
 	init.num_parents = ARRAY_SIZE(pdata);
 	init.ops = &clk_regmap_mux_div_ops;