| Message ID | 20210805135529.14146-1-hemant.agrawal@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] doc: announce change in crypto raw data vector | expand |
> The current crypto raw data vectors need to be extended to support > out of place processing. It is proposed to add additional desl_sgl > to provide details for destination sgl. > The same is also extended to support rte_security usecases, where > we need total data length to know how much additional memory space > is available in buffer other than data length so that driver/HW > can write expanded size data after encryption. > > Signed-off-by: Gagandeep Singh <G.Singh@nxp.com> > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > --- > doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/doc/guides/rel_notes/deprecation.rst > b/doc/guides/rel_notes/deprecation.rst > index f4a4d00db2..c19a306c93 100644 > --- a/doc/guides/rel_notes/deprecation.rst > +++ b/doc/guides/rel_notes/deprecation.rst > @@ -193,3 +193,15 @@ Deprecation Notices > reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other > information from the crypto/security operation. This field will be used to > communicate events such as soft expiry with IPsec in lookaside mode. > + > +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add > + ``dest_sgl`` to support out of place processing. This field will be null for > + inplace processing. This change is targeted for DPDK 21.11 > + > +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add > + ``tot_len`` to support total buffer length. This is required for security > + cases like IPsec and PDCP encryption offload to know how much additional > + memory space is available in buffer other than data length so that > driver/HW > + can write expanded size data after encryption. This change is targeted for > + DPDK 21.11 > + Acked-by: Akhil Goyal <gakhil@marvell.com>
ping for review. On 8/5/2021 7:25 PM, Hemant Agrawal wrote: > The current crypto raw data vectors need to be extended to support > out of place processing. It is proposed to add additional desl_sgl > to provide details for destination sgl. > The same is also extended to support rte_security usecases, where > we need total data length to know how much additional memory space > is available in buffer other than data length so that driver/HW > can write expanded size data after encryption. > > Signed-off-by: Gagandeep Singh <G.Singh@nxp.com> > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > --- > doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst > index f4a4d00db2..c19a306c93 100644 > --- a/doc/guides/rel_notes/deprecation.rst > +++ b/doc/guides/rel_notes/deprecation.rst > @@ -193,3 +193,15 @@ Deprecation Notices > reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other > information from the crypto/security operation. This field will be used to > communicate events such as soft expiry with IPsec in lookaside mode. > + > +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add > + ``dest_sgl`` to support out of place processing. This field will be null for > + inplace processing. This change is targeted for DPDK 21.11 > + > +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add > + ``tot_len`` to support total buffer length. This is required for security > + cases like IPsec and PDCP encryption offload to know how much additional > + memory space is available in buffer other than data length so that driver/HW > + can write expanded size data after encryption. This change is targeted for > + DPDK 21.11 > +
Hi Hemant, > > The current crypto raw data vectors need to be extended to support > > out of place processing. It is proposed to add additional desl_sgl > > to provide details for destination sgl. > > The same is also extended to support rte_security usecases, where > > we need total data length to know how much additional memory space > > is available in buffer other than data length so that driver/HW > > can write expanded size data after encryption. > > > > Signed-off-by: Gagandeep Singh <G.Singh@nxp.com> > > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > > --- > > doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst > > index f4a4d00db2..c19a306c93 100644 > > --- a/doc/guides/rel_notes/deprecation.rst > > +++ b/doc/guides/rel_notes/deprecation.rst > > @@ -193,3 +193,15 @@ Deprecation Notices > > reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other > > information from the crypto/security operation. This field will be used to > > communicate events such as soft expiry with IPsec in lookaside mode. > > + > > +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add > > + ``dest_sgl`` to support out of place processing. This field will be null for > > + inplace processing. This change is targeted for DPDK 21.11 Seems ok to me, just one question: would layout (number of elems in SG, length of each elem) for sgl and dest_sgl always be identical? > > + > > +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add > > + ``tot_len`` to support total buffer length. This is required for security > > + cases like IPsec and PDCP encryption offload to know how much additional > > + memory space is available in buffer other than data length so that driver/HW > > + can write expanded size data after encryption. This change is targeted for > > + DPDK 21.11 > > + Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Hi Konstantin On 8/6/2021 3:34 PM, Ananyev, Konstantin wrote: > Hi Hemant, > >>> The current crypto raw data vectors need to be extended to support >>> out of place processing. It is proposed to add additional desl_sgl >>> to provide details for destination sgl. >>> The same is also extended to support rte_security usecases, where >>> we need total data length to know how much additional memory space >>> is available in buffer other than data length so that driver/HW >>> can write expanded size data after encryption. >>> >>> Signed-off-by: Gagandeep Singh <G.Singh@nxp.com> >>> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> >>> --- >>> doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++ >>> 1 file changed, 12 insertions(+) >>> >>> diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst >>> index f4a4d00db2..c19a306c93 100644 >>> --- a/doc/guides/rel_notes/deprecation.rst >>> +++ b/doc/guides/rel_notes/deprecation.rst >>> @@ -193,3 +193,15 @@ Deprecation Notices >>> reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other >>> information from the crypto/security operation. This field will be used to >>> communicate events such as soft expiry with IPsec in lookaside mode. >>> + >>> +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add >>> + ``dest_sgl`` to support out of place processing. This field will be null for >>> + inplace processing. This change is targeted for DPDK 21.11 > Seems ok to me, just one question: > would layout (number of elems in SG, length of each elem) > for sgl and dest_sgl always be identical? No, there shall not be any such restriction. Both source and destination can be different buffer with their own number of elem (if any) and length of each elem. >>> + >>> +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add >>> + ``tot_len`` to support total buffer length. This is required for security >>> + cases like IPsec and PDCP encryption offload to know how much additional >>> + memory space is available in buffer other than data length so that driver/HW >>> + can write expanded size data after encryption. This change is targeted for >>> + DPDK 21.11 >>> + > Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> >
> >>> The current crypto raw data vectors need to be extended to support > >>> out of place processing. It is proposed to add additional desl_sgl > >>> to provide details for destination sgl. > >>> The same is also extended to support rte_security usecases, where > >>> we need total data length to know how much additional memory space > >>> is available in buffer other than data length so that driver/HW > >>> can write expanded size data after encryption. > >>> > >>> Signed-off-by: Gagandeep Singh <G.Singh@nxp.com> > >>> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > >>> --- > >>> doc/guides/rel_notes/deprecation.rst | 12 ++++++++++++ > >>> 1 file changed, 12 insertions(+) > >>> > >>> diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst > >>> index f4a4d00db2..c19a306c93 100644 > >>> --- a/doc/guides/rel_notes/deprecation.rst > >>> +++ b/doc/guides/rel_notes/deprecation.rst > >>> @@ -193,3 +193,15 @@ Deprecation Notices > >>> reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other > >>> information from the crypto/security operation. This field will be used to > >>> communicate events such as soft expiry with IPsec in lookaside mode. > >>> + > >>> +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add > >>> + ``dest_sgl`` to support out of place processing. This field will be null for > >>> + inplace processing. This change is targeted for DPDK 21.11 > > Seems ok to me, just one question: > > would layout (number of elems in SG, length of each elem) > > for sgl and dest_sgl always be identical? > > No, there shall not be any such restriction. Both source and destination > can be different buffer with their own number of elem (if any) and > length of each elem. Ok, thanks for clarification. > > >>> + > >>> +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add > >>> + ``tot_len`` to support total buffer length. This is required for security > >>> + cases like IPsec and PDCP encryption offload to know how much additional > >>> + memory space is available in buffer other than data length so that driver/HW > >>> + can write expanded size data after encryption. This change is targeted for > >>> + DPDK 21.11 > >>> + > > Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> > >
05/08/2021 16:04, Akhil Goyal: > > The current crypto raw data vectors need to be extended to support > > out of place processing. It is proposed to add additional desl_sgl > > to provide details for destination sgl. > > The same is also extended to support rte_security usecases, where > > we need total data length to know how much additional memory space > > is available in buffer other than data length so that driver/HW > > can write expanded size data after encryption. > > > > Signed-off-by: Gagandeep Singh <G.Singh@nxp.com> > > Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> > > --- > > +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add > > + ``dest_sgl`` to support out of place processing. This field will be null for > > + inplace processing. This change is targeted for DPDK 21.11 > > + > > +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add > > + ``tot_len`` to support total buffer length. This is required for security > > + cases like IPsec and PDCP encryption offload to know how much additional > > + memory space is available in buffer other than data length so that > > driver/HW > > + can write expanded size data after encryption. This change is targeted for > > + DPDK 21.11 > > + > Acked-by: Akhil Goyal <gakhil@marvell.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Thomas Monjalon <thomas@monjalon.net> Applied, thanks.
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index f4a4d00db2..c19a306c93 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -193,3 +193,15 @@ Deprecation Notices reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other information from the crypto/security operation. This field will be used to communicate events such as soft expiry with IPsec in lookaside mode. + +* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add + ``dest_sgl`` to support out of place processing. This field will be null for + inplace processing. This change is targeted for DPDK 21.11 + +* cryptodev: The structure ``rte_crypto_vec`` would be updated to add + ``tot_len`` to support total buffer length. This is required for security + cases like IPsec and PDCP encryption offload to know how much additional + memory space is available in buffer other than data length so that driver/HW + can write expanded size data after encryption. This change is targeted for + DPDK 21.11 +