@@ -401,11 +401,11 @@ static int ksz8041_config_aneg(struct phy_device *phydev)
}
static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev,
- const u32 ksz_phy_id)
+ const bool ksz_8051)
{
int ret;
- if ((phydev->phy_id & MICREL_PHY_ID_MASK) != ksz_phy_id)
+ if ((phydev->phy_id & MICREL_PHY_ID_MASK) != PHY_ID_KSZ8051)
return 0;
ret = phy_read(phydev, MII_BMSR);
@@ -418,7 +418,7 @@ static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev,
* the switch does not.
*/
ret &= BMSR_ERCAP;
- if (ksz_phy_id == PHY_ID_KSZ8051)
+ if (ksz_8051)
return ret;
else
return !ret;
@@ -426,7 +426,7 @@ static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev,
static int ksz8051_match_phy_device(struct phy_device *phydev)
{
- return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8051);
+ return ksz8051_ksz8795_match_phy_device(phydev, true);
}
static int ksz8081_config_init(struct phy_device *phydev)
@@ -535,7 +535,7 @@ static int ksz8061_config_init(struct phy_device *phydev)
static int ksz8795_match_phy_device(struct phy_device *phydev)
{
- return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ87XX);
+ return ksz8051_ksz8795_match_phy_device(phydev, false);
}
static int ksz9021_load_values_from_of(struct phy_device *phydev,
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by: Steve Bennett <steveb@workware.net.au> --- drivers/net/phy/micrel.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)