diff mbox series

intersil: remove obsolete prism54 wireless driver

Message ID 20210713054025.32006-1-lukas.bulwahn@gmail.com
State New
Headers show
Series intersil: remove obsolete prism54 wireless driver | expand

Commit Message

Lukas Bulwahn July 13, 2021, 5:40 a.m. UTC
Commit 1d89cae1b47d ("MAINTAINERS: mark prism54 obsolete") indicated the
prism54 driver as obsolete in July 2010.

Now, after being exposed for ten years to refactoring, general tree-wide
changes and various janitor clean-up, it is really time to delete the
driver for good.

This was discovered as part of a checkpatch evaluation, investigating all
reports of checkpatch's WARNING:OBSOLETE check.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
Kalle, please pick this non-urgent driver clean-up patch.

 MAINTAINERS                                   |    7 -
 drivers/net/wireless/intersil/Kconfig         |   20 -
 drivers/net/wireless/intersil/Makefile        |    1 -
 .../net/wireless/intersil/prism54/Makefile    |    9 -
 .../net/wireless/intersil/prism54/isl_38xx.c  |  245 --
 .../net/wireless/intersil/prism54/isl_38xx.h  |  158 -
 .../net/wireless/intersil/prism54/isl_ioctl.c | 2909 -----------------
 .../net/wireless/intersil/prism54/isl_ioctl.h |   35 -
 .../net/wireless/intersil/prism54/isl_oid.h   |  492 ---
 .../wireless/intersil/prism54/islpci_dev.c    |  951 ------
 .../wireless/intersil/prism54/islpci_dev.h    |  204 --
 .../wireless/intersil/prism54/islpci_eth.c    |  489 ---
 .../wireless/intersil/prism54/islpci_eth.h    |   59 -
 .../intersil/prism54/islpci_hotplug.c         |  316 --
 .../wireless/intersil/prism54/islpci_mgt.c    |  491 ---
 .../wireless/intersil/prism54/islpci_mgt.h    |  126 -
 .../net/wireless/intersil/prism54/oid_mgt.c   |  889 -----
 .../net/wireless/intersil/prism54/oid_mgt.h   |   46 -
 .../wireless/intersil/prism54/prismcompat.h   |   30 -
 19 files changed, 7477 deletions(-)
 delete mode 100644 drivers/net/wireless/intersil/prism54/Makefile
 delete mode 100644 drivers/net/wireless/intersil/prism54/isl_38xx.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/isl_38xx.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/isl_ioctl.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/isl_ioctl.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/isl_oid.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_dev.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_dev.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_eth.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_eth.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_hotplug.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_mgt.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/islpci_mgt.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/oid_mgt.c
 delete mode 100644 drivers/net/wireless/intersil/prism54/oid_mgt.h
 delete mode 100644 drivers/net/wireless/intersil/prism54/prismcompat.h

Comments

Luis Chamberlain July 15, 2021, 10:06 p.m. UTC | #1
On Tue, Jul 13, 2021 at 07:40:25AM +0200, Lukas Bulwahn wrote:
> Commit 1d89cae1b47d ("MAINTAINERS: mark prism54 obsolete") indicated the
> prism54 driver as obsolete in July 2010.
> 
> Now, after being exposed for ten years to refactoring, general tree-wide
> changes and various janitor clean-up, it is really time to delete the
> driver for good.
> 
> This was discovered as part of a checkpatch evaluation, investigating all
> reports of checkpatch's WARNING:OBSOLETE check.
> 
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
> ---

Acked-by: Luis Chamberlain <mcgrof@kernel.org>

  Luis
Christian Lamparter July 16, 2021, 7:25 a.m. UTC | #2
On 16/07/2021 00:06, Luis Chamberlain wrote:
> On Tue, Jul 13, 2021 at 07:40:25AM +0200, Lukas Bulwahn wrote:
>> Commit 1d89cae1b47d ("MAINTAINERS: mark prism54 obsolete") indicated the
>> prism54 driver as obsolete in July 2010.
>>
>> Now, after being exposed for ten years to refactoring, general tree-wide
>> changes and various janitor clean-up, it is really time to delete the
>> driver for good.
>>
>> This was discovered as part of a checkpatch evaluation, investigating all
>> reports of checkpatch's WARNING:OBSOLETE check.
>>
>> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
>> ---

noted. Farewell.

Cheers
Christian
Kalle Valo July 27, 2021, 6:07 a.m. UTC | #3
Christian Lamparter <chunkeey@gmail.com> writes:

> On 16/07/2021 00:06, Luis Chamberlain wrote:
>> On Tue, Jul 13, 2021 at 07:40:25AM +0200, Lukas Bulwahn wrote:
>>> Commit 1d89cae1b47d ("MAINTAINERS: mark prism54 obsolete") indicated the
>>> prism54 driver as obsolete in July 2010.
>>>
>>> Now, after being exposed for ten years to refactoring, general tree-wide
>>> changes and various janitor clean-up, it is really time to delete the
>>> driver for good.
>>>
>>> This was discovered as part of a checkpatch evaluation, investigating all
>>> reports of checkpatch's WARNING:OBSOLETE check.
>>>
>>> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
>>> ---
>
> noted. Farewell.

How do we know that there are no users left? It's surprising how ancient
hardware some people use. Is the driver broken or what?

(Reads commit 1d89cae1b47d)

Ah, p54 is supposed to replace prism54. Does that include all the
hardware supported by prism54? If yes, that should be clearly documented
in the commit log and I can add that.
Luis Chamberlain July 27, 2021, 12:42 p.m. UTC | #4
On Tue, Jul 27, 2021 at 09:07:48AM +0300, Kalle Valo wrote:
> Christian Lamparter <chunkeey@gmail.com> writes:
> 
> > On 16/07/2021 00:06, Luis Chamberlain wrote:
> >> On Tue, Jul 13, 2021 at 07:40:25AM +0200, Lukas Bulwahn wrote:
> >>> Commit 1d89cae1b47d ("MAINTAINERS: mark prism54 obsolete") indicated the
> >>> prism54 driver as obsolete in July 2010.
> >>>
> >>> Now, after being exposed for ten years to refactoring, general tree-wide
> >>> changes and various janitor clean-up, it is really time to delete the
> >>> driver for good.
> >>>
> >>> This was discovered as part of a checkpatch evaluation, investigating all
> >>> reports of checkpatch's WARNING:OBSOLETE check.
> >>>
> >>> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
> >>> ---
> >
> > noted. Farewell.
> 
> How do we know that there are no users left? It's surprising how ancient
> hardware some people use. Is the driver broken or what?
> 
> (Reads commit 1d89cae1b47d)
> 
> Ah, p54 is supposed to replace prism54. Does that include all the
> hardware supported by prism54?

There was a one off chipset someone told me about long ago that p54
didn't work for. But that persond disappeared from the face of the
earth. Additionally, distributions have been blacklisting prism54
for years now.

> If yes, that should be clearly documented
> in the commit log and I can add that.

Agreed. Feel free to quote the above.

  Luis
Kalle Valo July 28, 2021, 2:54 p.m. UTC | #5
Luis Chamberlain <mcgrof@kernel.org> writes:

> On Tue, Jul 27, 2021 at 09:07:48AM +0300, Kalle Valo wrote:

>> Christian Lamparter <chunkeey@gmail.com> writes:

>> 

>> > On 16/07/2021 00:06, Luis Chamberlain wrote:

>> >> On Tue, Jul 13, 2021 at 07:40:25AM +0200, Lukas Bulwahn wrote:

>> >>> Commit 1d89cae1b47d ("MAINTAINERS: mark prism54 obsolete") indicated the

>> >>> prism54 driver as obsolete in July 2010.

>> >>>

>> >>> Now, after being exposed for ten years to refactoring, general tree-wide

>> >>> changes and various janitor clean-up, it is really time to delete the

>> >>> driver for good.

>> >>>

>> >>> This was discovered as part of a checkpatch evaluation, investigating all

>> >>> reports of checkpatch's WARNING:OBSOLETE check.

>> >>>

>> >>> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>

>> >>> ---

>> >

>> > noted. Farewell.

>> 

>> How do we know that there are no users left? It's surprising how ancient

>> hardware some people use. Is the driver broken or what?

>> 

>> (Reads commit 1d89cae1b47d)

>> 

>> Ah, p54 is supposed to replace prism54. Does that include all the

>> hardware supported by prism54?

>

> There was a one off chipset someone told me about long ago that p54

> didn't work for. But that persond disappeared from the face of the

> earth. Additionally, distributions have been blacklisting prism54

> for years now.

>

>> If yes, that should be clearly documented

>> in the commit log and I can add that.

>

> Agreed. Feel free to quote the above.


Thanks, will do.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 548783bf6505..de3eb7b79752 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14940,13 +14940,6 @@  S:	Maintained
 F:	include/linux/printk.h
 F:	kernel/printk/
 
-PRISM54 WIRELESS DRIVER
-M:	Luis Chamberlain <mcgrof@kernel.org>
-L:	linux-wireless@vger.kernel.org
-S:	Obsolete
-W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
-F:	drivers/net/wireless/intersil/prism54/
-
 PROC FILESYSTEM
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index c52d9b535623..bd6bf70ece03 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -16,24 +16,4 @@  source "drivers/net/wireless/intersil/hostap/Kconfig"
 source "drivers/net/wireless/intersil/orinoco/Kconfig"
 source "drivers/net/wireless/intersil/p54/Kconfig"
 
-config PRISM54
-	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
-	depends on PCI
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	select FW_LOADER
-	help
-	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
-	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
-	  p54pci supports FullMAC PCI/Cardbus devices as well.
-
-	  For more information refer to the p54 wiki:
-
-	  http://wireless.wiki.kernel.org/en/users/Drivers/p54
-
-	  Note: You need a motherboard with DMA support to use any of these cards
-
-	  When built as module you get the module prism54
-
 endif # WLAN_VENDOR_INTERSIL
diff --git a/drivers/net/wireless/intersil/Makefile b/drivers/net/wireless/intersil/Makefile
index aa630e9c3d3d..65281d1b3d85 100644
--- a/drivers/net/wireless/intersil/Makefile
+++ b/drivers/net/wireless/intersil/Makefile
@@ -2,4 +2,3 @@ 
 obj-$(CONFIG_HOSTAP)		+= hostap/
 obj-$(CONFIG_HERMES)		+= orinoco/
 obj-$(CONFIG_P54_COMMON)	+= p54/
-obj-$(CONFIG_PRISM54)		+= prism54/
diff --git a/drivers/net/wireless/intersil/prism54/Makefile b/drivers/net/wireless/intersil/prism54/Makefile
deleted file mode 100644
index 4f5572dffb5e..000000000000
--- a/drivers/net/wireless/intersil/prism54/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-only
-# $Id: Makefile.k26,v 1.7 2004/01/30 16:24:00 ajfa Exp $
-
-prism54-objs := islpci_eth.o islpci_mgt.o \
-                isl_38xx.o isl_ioctl.o islpci_dev.o \
-		islpci_hotplug.o oid_mgt.o
-
-obj-$(CONFIG_PRISM54) += prism54.o
-
diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c
deleted file mode 100644
index ae964de347f7..000000000000
--- a/drivers/net/wireless/intersil/prism54/isl_38xx.c
+++ /dev/null
@@ -1,245 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/ktime.h>
-
-#include <linux/uaccess.h>
-#include <asm/io.h>
-
-#include "prismcompat.h"
-#include "isl_38xx.h"
-#include "islpci_dev.h"
-#include "islpci_mgt.h"
-
-/******************************************************************************
-    Device Interface & Control functions
-******************************************************************************/
-
-/**
- * isl38xx_disable_interrupts - disable all interrupts
- * @device: pci memory base address
- *
- *  Instructs the device to disable all interrupt reporting by asserting
- *  the IRQ line. New events may still show up in the interrupt identification
- *  register located at offset %ISL38XX_INT_IDENT_REG.
- */
-void
-isl38xx_disable_interrupts(void __iomem *device)
-{
-	isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);
-}
-
-void
-isl38xx_handle_sleep_request(isl38xx_control_block *control_block,
-			     int *powerstate, void __iomem *device_base)
-{
-	/* device requests to go into sleep mode
-	 * check whether the transmit queues for data and management are empty */
-	if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ))
-		/* data tx queue not empty */
-		return;
-
-	if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
-		/* management tx queue not empty */
-		return;
-
-	/* check also whether received frames are pending */
-	if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ))
-		/* data rx queue not empty */
-		return;
-
-	if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ))
-		/* management rx queue not empty */
-		return;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING, "Device going to sleep mode\n");
-#endif
-
-	/* all queues are empty, allow the device to go into sleep mode */
-	*powerstate = ISL38XX_PSM_POWERSAVE_STATE;
-
-	/* assert the Sleep interrupt in the Device Interrupt Register */
-	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP,
-			  ISL38XX_DEV_INT_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);
-}
-
-void
-isl38xx_handle_wakeup(isl38xx_control_block *control_block,
-		      int *powerstate, void __iomem *device_base)
-{
-	/* device is in active state, update the powerstate flag */
-	*powerstate = ISL38XX_PSM_ACTIVE_STATE;
-
-	/* now check whether there are frames pending for the card */
-	if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)
-	    && !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
-		return;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n");
-#endif
-
-	/* either data or management transmit queue has a frame pending
-	 * trigger the device by setting the Update bit in the Device Int reg */
-	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
-			  ISL38XX_DEV_INT_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);
-}
-
-void
-isl38xx_trigger_device(int asleep, void __iomem *device_base)
-{
-	u32 reg;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	u32 counter = 0;
-	struct timespec64 current_ts64;
-	DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n");
-#endif
-
-	/* check whether the device is in power save mode */
-	if (asleep) {
-		/* device is in powersave, trigger the device for wakeup */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		ktime_get_real_ts64(&current_ts64);
-		DEBUG(SHOW_TRACING, "%lld.%09ld Device wakeup triggered\n",
-		      (s64)current_ts64.tv_sec, current_ts64.tv_nsec);
-
-		DEBUG(SHOW_TRACING, "%lld.%09ld Device register read %08x\n",
-		      (s64)current_ts64.tv_sec, current_ts64.tv_nsec,
-		      readl(device_base + ISL38XX_CTRL_STAT_REG));
-#endif
-
-		reg = readl(device_base + ISL38XX_INT_IDENT_REG);
-		if (reg == 0xabadface) {
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			ktime_get_real_ts64(&current_ts64);
-			DEBUG(SHOW_TRACING,
-			      "%lld.%09ld Device register abadface\n",
-			      (s64)current_ts64.tv_sec, current_ts64.tv_nsec);
-#endif
-			/* read the Device Status Register until Sleepmode bit is set */
-			while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG),
-			       (reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) {
-				udelay(ISL38XX_WRITEIO_DELAY);
-#if VERBOSE > SHOW_ERROR_MESSAGES
-				counter++;
-#endif
-			}
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING,
-			      "%lld.%09ld Device register read %08x\n",
-			      (s64)current_ts64.tv_sec, current_ts64.tv_nsec,
-			      readl(device_base + ISL38XX_CTRL_STAT_REG));
-			ktime_get_real_ts64(&current_ts64);
-			DEBUG(SHOW_TRACING,
-			      "%lld.%09ld Device asleep counter %i\n",
-			      (s64)current_ts64.tv_sec, current_ts64.tv_nsec,
-			      counter);
-#endif
-		}
-		/* assert the Wakeup interrupt in the Device Interrupt Register */
-		isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
-				  ISL38XX_DEV_INT_REG);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		udelay(ISL38XX_WRITEIO_DELAY);
-
-		/* perform another read on the Device Status Register */
-		reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-		ktime_get_real_ts64(&current_ts64);
-		DEBUG(SHOW_TRACING, "%lld.%00ld Device register read %08x\n",
-		      (s64)current_ts64.tv_sec, current_ts64.tv_nsec, reg);
-#endif
-	} else {
-		/* device is (still) awake  */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_TRACING, "Device is in active state\n");
-#endif
-		/* trigger the device by setting the Update bit in the Device Int reg */
-
-		isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
-				  ISL38XX_DEV_INT_REG);
-	}
-}
-
-void
-isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address)
-{
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n");
-#endif
-
-	/* load the address of the control block in the device */
-	isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* set the reset bit in the Device Interrupt Register */
-	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* enable the interrupt for detecting initialization */
-
-	/* Note: Do not enable other interrupts here. We want the
-	 * device to have come up first 100% before allowing any other
-	 * interrupts. */
-	isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);  /* allow complete full reset */
-}
-
-void
-isl38xx_enable_common_interrupts(void __iomem *device_base)
-{
-	u32 reg;
-
-	reg = ISL38XX_INT_IDENT_UPDATE | ISL38XX_INT_IDENT_SLEEP |
-	      ISL38XX_INT_IDENT_WAKEUP;
-	isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG);
-	udelay(ISL38XX_WRITEIO_DELAY);
-}
-
-int
-isl38xx_in_queue(isl38xx_control_block *cb, int queue)
-{
-	const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) -
-			   le32_to_cpu(cb->device_curr_frag[queue]));
-
-	/* determine the amount of fragments in the queue depending on the type
-	 * of the queue, either transmit or receive */
-
-	BUG_ON(delta < 0);	/* driver ptr must be ahead of device ptr */
-
-	switch (queue) {
-		/* send queues */
-	case ISL38XX_CB_TX_MGMTQ:
-		BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
-		fallthrough;
-
-	case ISL38XX_CB_TX_DATA_LQ:
-	case ISL38XX_CB_TX_DATA_HQ:
-		BUG_ON(delta > ISL38XX_CB_TX_QSIZE);
-		return delta;
-
-		/* receive queues */
-	case ISL38XX_CB_RX_MGMTQ:
-		BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
-		return ISL38XX_CB_MGMT_QSIZE - delta;
-
-	case ISL38XX_CB_RX_DATA_LQ:
-	case ISL38XX_CB_RX_DATA_HQ:
-		BUG_ON(delta > ISL38XX_CB_RX_QSIZE);
-		return ISL38XX_CB_RX_QSIZE - delta;
-	}
-	BUG();
-	return 0;
-}
diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.h b/drivers/net/wireless/intersil/prism54/isl_38xx.h
deleted file mode 100644
index 69218b8b2b23..000000000000
--- a/drivers/net/wireless/intersil/prism54/isl_38xx.h
+++ /dev/null
@@ -1,158 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- */
-
-#ifndef _ISL_38XX_H
-#define _ISL_38XX_H
-
-#include <asm/io.h>
-#include <asm/byteorder.h>
-
-#define ISL38XX_CB_RX_QSIZE                     8
-#define ISL38XX_CB_TX_QSIZE                     32
-
-/* ISL38XX Access Point Specific definitions */
-#define ISL38XX_MAX_WDS_LINKS                   8
-
-/* ISL38xx Client Specific definitions */
-#define ISL38XX_PSM_ACTIVE_STATE                0
-#define ISL38XX_PSM_POWERSAVE_STATE             1
-
-/* ISL38XX Host Interface Definitions */
-#define ISL38XX_PCI_MEM_SIZE                    0x02000
-#define ISL38XX_MEMORY_WINDOW_SIZE              0x01000
-#define ISL38XX_DEV_FIRMWARE_ADDRES             0x20000
-#define ISL38XX_WRITEIO_DELAY                   10	/* in us */
-#define ISL38XX_RESET_DELAY                     50	/* in ms */
-#define ISL38XX_WAIT_CYCLE                      10	/* in 10ms */
-#define ISL38XX_MAX_WAIT_CYCLES                 10
-
-/* PCI Memory Area */
-#define ISL38XX_HARDWARE_REG                    0x0000
-#define ISL38XX_CARDBUS_CIS                     0x0800
-#define ISL38XX_DIRECT_MEM_WIN                  0x1000
-
-/* Hardware registers */
-#define ISL38XX_DEV_INT_REG                     0x0000
-#define ISL38XX_INT_IDENT_REG                   0x0010
-#define ISL38XX_INT_ACK_REG                     0x0014
-#define ISL38XX_INT_EN_REG                      0x0018
-#define ISL38XX_GEN_PURP_COM_REG_1              0x0020
-#define ISL38XX_GEN_PURP_COM_REG_2              0x0024
-#define ISL38XX_CTRL_BLK_BASE_REG               ISL38XX_GEN_PURP_COM_REG_1
-#define ISL38XX_DIR_MEM_BASE_REG                0x0030
-#define ISL38XX_CTRL_STAT_REG                   0x0078
-
-/* High end mobos queue up pci writes, the following
- * is used to "read" from after a write to force flush */
-#define ISL38XX_PCI_POSTING_FLUSH		ISL38XX_INT_EN_REG
-
-/**
- * isl38xx_w32_flush - PCI iomem write helper
- * @base: (host) memory base address of the device
- * @val: 32bit value (host order) to write
- * @offset: byte offset into @base to write value to
- *
- *  This helper takes care of writing a 32bit datum to the
- *  specified offset into the device's pci memory space, and making sure
- *  the pci memory buffers get flushed by performing one harmless read
- *  from the %ISL38XX_PCI_POSTING_FLUSH offset.
- */
-static inline void
-isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
-{
-	writel(val, base + offset);
-	(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
-}
-
-/* Device Interrupt register bits */
-#define ISL38XX_DEV_INT_RESET                   0x0001
-#define ISL38XX_DEV_INT_UPDATE                  0x0002
-#define ISL38XX_DEV_INT_WAKEUP                  0x0008
-#define ISL38XX_DEV_INT_SLEEP                   0x0010
-
-/* Interrupt Identification/Acknowledge/Enable register bits */
-#define ISL38XX_INT_IDENT_UPDATE                0x0002
-#define ISL38XX_INT_IDENT_INIT                  0x0004
-#define ISL38XX_INT_IDENT_WAKEUP                0x0008
-#define ISL38XX_INT_IDENT_SLEEP                 0x0010
-#define ISL38XX_INT_SOURCES                     0x001E
-
-/* Control/Status register bits */
-/* Looks like there are other meaningful bits
-    0x20004400 seen in normal operation,
-    0x200044db at 'timeout waiting for mgmt response'
-*/
-#define ISL38XX_CTRL_STAT_SLEEPMODE             0x00000200
-#define	ISL38XX_CTRL_STAT_CLKRUN		0x00800000
-#define ISL38XX_CTRL_STAT_RESET                 0x10000000
-#define ISL38XX_CTRL_STAT_RAMBOOT               0x20000000
-#define ISL38XX_CTRL_STAT_STARTHALTED           0x40000000
-#define ISL38XX_CTRL_STAT_HOST_OVERRIDE         0x80000000
-
-/* Control Block definitions */
-#define ISL38XX_CB_RX_DATA_LQ                   0
-#define ISL38XX_CB_TX_DATA_LQ                   1
-#define ISL38XX_CB_RX_DATA_HQ                   2
-#define ISL38XX_CB_TX_DATA_HQ                   3
-#define ISL38XX_CB_RX_MGMTQ                     4
-#define ISL38XX_CB_TX_MGMTQ                     5
-#define ISL38XX_CB_QCOUNT                       6
-#define ISL38XX_CB_MGMT_QSIZE                   4
-#define ISL38XX_MIN_QTHRESHOLD                  4	/* fragments */
-
-/* Memory Manager definitions */
-#define MGMT_FRAME_SIZE                         1500	/* >= size struct obj_bsslist */
-#define MGMT_TX_FRAME_COUNT                     24	/* max 4 + spare 4 + 8 init */
-#define MGMT_RX_FRAME_COUNT                     24	/* 4*4 + spare 8 */
-#define MGMT_FRAME_COUNT                        (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
-#define CONTROL_BLOCK_SIZE                      1024	/* should be enough */
-#define PSM_FRAME_SIZE                          1536
-#define PSM_MINIMAL_STATION_COUNT               64
-#define PSM_FRAME_COUNT                         PSM_MINIMAL_STATION_COUNT
-#define PSM_BUFFER_SIZE                         PSM_FRAME_SIZE * PSM_FRAME_COUNT
-#define MAX_TRAP_RX_QUEUE                       4
-#define HOST_MEM_BLOCK                          CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
-
-/* Fragment package definitions */
-#define FRAGMENT_FLAG_MF                        0x0001
-#define MAX_FRAGMENT_SIZE                       1536
-
-/* In monitor mode frames have a header. I don't know exactly how big those
- * frame can be but I've never seen any frame bigger than 1584... :
- */
-#define MAX_FRAGMENT_SIZE_RX	                1600
-
-typedef struct {
-	__le32 address;		/* physical address on host */
-	__le16 size;		/* packet size */
-	__le16 flags;		/* set of bit-wise flags */
-} isl38xx_fragment;
-
-struct isl38xx_cb {
-	__le32 driver_curr_frag[ISL38XX_CB_QCOUNT];
-	__le32 device_curr_frag[ISL38XX_CB_QCOUNT];
-	isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
-	isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
-	isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
-	isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
-	isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
-	isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
-};
-
-typedef struct isl38xx_cb isl38xx_control_block;
-
-/* determine number of entries currently in queue */
-int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
-
-void isl38xx_disable_interrupts(void __iomem *);
-void isl38xx_enable_common_interrupts(void __iomem *);
-
-void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
-				  void __iomem *);
-void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *);
-void isl38xx_trigger_device(int, void __iomem *);
-void isl38xx_interface_reset(void __iomem *, dma_addr_t);
-
-#endif				/* _ISL_38XX_H */
diff --git a/drivers/net/wireless/intersil/prism54/isl_ioctl.c b/drivers/net/wireless/intersil/prism54/isl_ioctl.c
deleted file mode 100644
index 5e5ceafe098b..000000000000
--- a/drivers/net/wireless/intersil/prism54/isl_ioctl.c
+++ /dev/null
@@ -1,2909 +0,0 @@ 
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *            (C) 2003,2004 Aurelien Alleaume <slts@free.fr>
- *            (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
- *            (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <linux/capability.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/if_arp.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/etherdevice.h>
-
-#include <linux/uaccess.h>
-
-#include "prismcompat.h"
-#include "isl_ioctl.h"
-#include "islpci_mgt.h"
-#include "isl_oid.h"		/* additional types and defs for isl38xx fw */
-#include "oid_mgt.h"
-
-#include <net/iw_handler.h>	/* New driver API */
-
-#define KEY_SIZE_WEP104 13	/* 104/128-bit WEP keys */
-#define KEY_SIZE_WEP40  5	/* 40/64-bit WEP keys */
-/* KEY_SIZE_TKIP should match isl_oid.h, struct obj_key.key[] size */
-#define KEY_SIZE_TKIP   32	/* TKIP keys */
-
-static void prism54_wpa_bss_ie_add(islpci_private *priv, u8 *bssid,
-				u8 *wpa_ie, size_t wpa_ie_len);
-static size_t prism54_wpa_bss_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie);
-static int prism54_set_wpa(struct net_device *, struct iw_request_info *,
-				__u32 *, char *);
-
-/* In 500 kbps */
-static const unsigned char scan_rate_list[] = { 2, 4, 11, 22,
-						12, 18, 24, 36,
-						48, 72, 96, 108 };
-
-/**
- * prism54_mib_mode_helper - MIB change mode helper function
- * @priv: the &struct islpci_private object to modify
- * @iw_mode: new mode (%IW_MODE_*)
- *
- *  This is a helper function, hence it does not lock. Make sure
- *  caller deals with locking *if* necessary. This function sets the
- *  mode-dependent mib values and does the mapping of the Linux
- *  Wireless API modes to Device firmware modes. It also checks for
- *  correct valid Linux wireless modes.
- */
-static int
-prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode)
-{
-	u32 config = INL_CONFIG_MANUALRUN;
-	u32 mode, bsstype;
-
-	/* For now, just catch early the Repeater and Secondary modes here */
-	if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) {
-		printk(KERN_DEBUG
-		       "%s(): Sorry, Repeater mode and Secondary mode "
-		       "are not yet supported by this driver.\n", __func__);
-		return -EINVAL;
-	}
-
-	priv->iw_mode = iw_mode;
-
-	switch (iw_mode) {
-	case IW_MODE_AUTO:
-		mode = INL_MODE_CLIENT;
-		bsstype = DOT11_BSSTYPE_ANY;
-		break;
-	case IW_MODE_ADHOC:
-		mode = INL_MODE_CLIENT;
-		bsstype = DOT11_BSSTYPE_IBSS;
-		break;
-	case IW_MODE_INFRA:
-		mode = INL_MODE_CLIENT;
-		bsstype = DOT11_BSSTYPE_INFRA;
-		break;
-	case IW_MODE_MASTER:
-		mode = INL_MODE_AP;
-		bsstype = DOT11_BSSTYPE_INFRA;
-		break;
-	case IW_MODE_MONITOR:
-		mode = INL_MODE_PROMISCUOUS;
-		bsstype = DOT11_BSSTYPE_ANY;
-		config |= INL_CONFIG_RXANNEX;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (init_wds)
-		config |= INL_CONFIG_WDS;
-	mgt_set(priv, DOT11_OID_BSSTYPE, &bsstype);
-	mgt_set(priv, OID_INL_CONFIG, &config);
-	mgt_set(priv, OID_INL_MODE, &mode);
-
-	return 0;
-}
-
-/*
- * prism54_mib_init - fill MIB cache with defaults
- *
- *  this function initializes the struct given as @mib with defaults,
- *  of which many are retrieved from the global module parameter
- *  variables.
- */
-void
-prism54_mib_init(islpci_private *priv)
-{
-	u32 channel, authen, wep, filter, dot1x, mlme, conformance, power, mode;
-	struct obj_buffer psm_buffer = {
-		.size = PSM_BUFFER_SIZE,
-		.addr = priv->device_psm_buffer
-	};
-
-	channel = CARD_DEFAULT_CHANNEL;
-	authen = CARD_DEFAULT_AUTHEN;
-	wep = CARD_DEFAULT_WEP;
-	filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */
-	dot1x = CARD_DEFAULT_DOT1X;
-	mlme = CARD_DEFAULT_MLME_MODE;
-	conformance = CARD_DEFAULT_CONFORMANCE;
-	power = 127;
-	mode = CARD_DEFAULT_IW_MODE;
-
-	mgt_set(priv, DOT11_OID_CHANNEL, &channel);
-	mgt_set(priv, DOT11_OID_AUTHENABLE, &authen);
-	mgt_set(priv, DOT11_OID_PRIVACYINVOKED, &wep);
-	mgt_set(priv, DOT11_OID_PSMBUFFER, &psm_buffer);
-	mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &filter);
-	mgt_set(priv, DOT11_OID_DOT1XENABLE, &dot1x);
-	mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlme);
-	mgt_set(priv, OID_INL_DOT11D_CONFORMANCE, &conformance);
-	mgt_set(priv, OID_INL_OUTPUTPOWER, &power);
-
-	/* This sets all of the mode-dependent values */
-	prism54_mib_mode_helper(priv, mode);
-}
-
-/* this will be executed outside of atomic context thanks to
- * schedule_work(), thus we can as well use sleeping semaphore
- * locking */
-void
-prism54_update_stats(struct work_struct *work)
-{
-	islpci_private *priv = container_of(work, islpci_private, stats_work);
-	char *data;
-	struct obj_bss bss, *bss2;
-	union oid_res_t r;
-
-	mutex_lock(&priv->stats_lock);
-
-/* Noise floor.
- * I'm not sure if the unit is dBm.
- * Note : If we are not connected, this value seems to be irrelevant. */
-
-	mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
-	priv->local_iwstatistics.qual.noise = r.u;
-
-/* Get the rssi of the link. To do this we need to retrieve a bss. */
-
-	/* First get the MAC address of the AP we are associated with. */
-	mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r);
-	data = r.ptr;
-
-	/* copy this MAC to the bss */
-	memcpy(bss.address, data, ETH_ALEN);
-	kfree(data);
-
-	/* now ask for the corresponding bss */
-	mgt_get_request(priv, DOT11_OID_BSSFIND, 0, (void *) &bss, &r);
-	bss2 = r.ptr;
-	/* report the rssi and use it to calculate
-	 *  link quality through a signal-noise
-	 *  ratio */
-	priv->local_iwstatistics.qual.level = bss2->rssi;
-	priv->local_iwstatistics.qual.qual =
-	    bss2->rssi - priv->iwstatistics.qual.noise;
-
-	kfree(bss2);
-
-	/* report that the stats are new */
-	priv->local_iwstatistics.qual.updated = 0x7;
-
-/* Rx : unable to decrypt the MPDU */
-	mgt_get_request(priv, DOT11_OID_PRIVRXFAILED, 0, NULL, &r);
-	priv->local_iwstatistics.discard.code = r.u;
-
-/* Tx : Max MAC retries num reached */
-	mgt_get_request(priv, DOT11_OID_MPDUTXFAILED, 0, NULL, &r);
-	priv->local_iwstatistics.discard.retries = r.u;
-
-	mutex_unlock(&priv->stats_lock);
-}
-
-struct iw_statistics *
-prism54_get_wireless_stats(struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	/* If the stats are being updated return old data */
-	if (mutex_trylock(&priv->stats_lock)) {
-		memcpy(&priv->iwstatistics, &priv->local_iwstatistics,
-		       sizeof (struct iw_statistics));
-		/* They won't be marked updated for the next time */
-		priv->local_iwstatistics.qual.updated = 0;
-		mutex_unlock(&priv->stats_lock);
-	} else
-		priv->iwstatistics.qual.updated = 0;
-
-	/* Update our wireless stats, but do not schedule to often
-	 * (max 1 HZ) */
-	if ((priv->stats_timestamp == 0) ||
-	    time_after(jiffies, priv->stats_timestamp + 1 * HZ)) {
-		schedule_work(&priv->stats_work);
-		priv->stats_timestamp = jiffies;
-	}
-
-	return &priv->iwstatistics;
-}
-
-static int
-prism54_commit(struct net_device *ndev, struct iw_request_info *info,
-	       char *cwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	/* simply re-set the last set SSID, this should commit most stuff */
-
-	/* Commit in Monitor mode is not necessary, also setting essid
-	 * in Monitor mode does not make sense and isn't allowed for this
-	 * device's firmware */
-	if (priv->iw_mode != IW_MODE_MONITOR)
-		return mgt_set_request(priv, DOT11_OID_SSID, 0, NULL);
-	return 0;
-}
-
-static int
-prism54_get_name(struct net_device *ndev, struct iw_request_info *info,
-		 char *cwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	char *capabilities;
-	union oid_res_t r;
-	int rvalue;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT) {
-		strncpy(cwrq, "NOT READY!", IFNAMSIZ);
-		return 0;
-	}
-	rvalue = mgt_get_request(priv, OID_INL_PHYCAPABILITIES, 0, NULL, &r);
-
-	switch (r.u) {
-	case INL_PHYCAP_5000MHZ:
-		capabilities = "IEEE 802.11a/b/g";
-		break;
-	case INL_PHYCAP_FAA:
-		capabilities = "IEEE 802.11b/g - FAA Support";
-		break;
-	case INL_PHYCAP_2400MHZ:
-	default:
-		capabilities = "IEEE 802.11b/g";	/* Default */
-		break;
-	}
-	strncpy(cwrq, capabilities, IFNAMSIZ);
-	return rvalue;
-}
-
-static int
-prism54_set_freq(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_freq *fwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int rvalue;
-	u32 c;
-
-	if (fwrq->m < 1000)
-		/* we have a channel number */
-		c = fwrq->m;
-	else
-		c = (fwrq->e == 1) ? channel_of_freq(fwrq->m / 100000) : 0;
-
-	rvalue = c ? mgt_set_request(priv, DOT11_OID_CHANNEL, 0, &c) : -EINVAL;
-
-	/* Call commit handler */
-	return (rvalue ? rvalue : -EINPROGRESS);
-}
-
-static int
-prism54_get_freq(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_freq *fwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue;
-
-	rvalue = mgt_get_request(priv, DOT11_OID_CHANNEL, 0, NULL, &r);
-	fwrq->i = r.u;
-	rvalue |= mgt_get_request(priv, DOT11_OID_FREQUENCY, 0, NULL, &r);
-	fwrq->m = r.u;
-	fwrq->e = 3;
-
-	return rvalue;
-}
-
-static int
-prism54_set_mode(struct net_device *ndev, struct iw_request_info *info,
-		 __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	u32 mlmeautolevel = CARD_DEFAULT_MLME_MODE;
-
-	/* Let's see if the user passed a valid Linux Wireless mode */
-	if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) {
-		printk(KERN_DEBUG
-		       "%s: %s() You passed a non-valid init_mode.\n",
-		       priv->ndev->name, __func__);
-		return -EINVAL;
-	}
-
-	down_write(&priv->mib_sem);
-
-	if (prism54_mib_mode_helper(priv, *uwrq)) {
-		up_write(&priv->mib_sem);
-		return -EOPNOTSUPP;
-	}
-
-	/* the ACL code needs an intermediate mlmeautolevel. The wpa stuff an
-	 * extended one.
-	 */
-	if ((*uwrq == IW_MODE_MASTER) && (priv->acl.policy != MAC_POLICY_OPEN))
-		mlmeautolevel = DOT11_MLME_INTERMEDIATE;
-	if (priv->wpa)
-		mlmeautolevel = DOT11_MLME_EXTENDED;
-
-	mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel);
-
-	if (mgt_commit(priv)) {
-		up_write(&priv->mib_sem);
-		return -EIO;
-	}
-	priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR)
-	    ? priv->monitor_type : ARPHRD_ETHER;
-	up_write(&priv->mib_sem);
-
-	return 0;
-}
-
-/* Use mib cache */
-static int
-prism54_get_mode(struct net_device *ndev, struct iw_request_info *info,
-		 __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	BUG_ON((priv->iw_mode < IW_MODE_AUTO) || (priv->iw_mode >
-						  IW_MODE_MONITOR));
-	*uwrq = priv->iw_mode;
-
-	return 0;
-}
-
-/* we use DOT11_OID_EDTHRESHOLD. From what I guess the card will not try to
- * emit data if (sensitivity > rssi - noise) (in dBm).
- * prism54_set_sens does not seem to work.
- */
-
-static int
-prism54_set_sens(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	u32 sens;
-
-	/* by default  the card sets this to 20. */
-	sens = vwrq->disabled ? 20 : vwrq->value;
-
-	return mgt_set_request(priv, DOT11_OID_EDTHRESHOLD, 0, &sens);
-}
-
-static int
-prism54_get_sens(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue;
-
-	rvalue = mgt_get_request(priv, DOT11_OID_EDTHRESHOLD, 0, NULL, &r);
-
-	vwrq->value = r.u;
-	vwrq->disabled = (vwrq->value == 0);
-	vwrq->fixed = 1;
-
-	return rvalue;
-}
-
-static int
-prism54_get_range(struct net_device *ndev, struct iw_request_info *info,
-		  struct iw_point *dwrq, char *extra)
-{
-	struct iw_range *range = (struct iw_range *) extra;
-	islpci_private *priv = netdev_priv(ndev);
-	u8 *data;
-	int i, m, rvalue;
-	struct obj_frequencies *freq;
-	union oid_res_t r;
-
-	memset(range, 0, sizeof (struct iw_range));
-	dwrq->length = sizeof (struct iw_range);
-
-	/* set the wireless extension version number */
-	range->we_version_source = SUPPORTED_WIRELESS_EXT;
-	range->we_version_compiled = WIRELESS_EXT;
-
-	/* Now the encoding capabilities */
-	range->num_encoding_sizes = 3;
-	/* 64(40) bits WEP */
-	range->encoding_size[0] = 5;
-	/* 128(104) bits WEP */
-	range->encoding_size[1] = 13;
-	/* 256 bits for WPA-PSK */
-	range->encoding_size[2] = 32;
-	/* 4 keys are allowed */
-	range->max_encoding_tokens = 4;
-
-	/* we don't know the quality range... */
-	range->max_qual.level = 0;
-	range->max_qual.noise = 0;
-	range->max_qual.qual = 0;
-	/* these value describe an average quality. Needs more tweaking... */
-	range->avg_qual.level = -80;	/* -80 dBm */
-	range->avg_qual.noise = 0;	/* don't know what to put here */
-	range->avg_qual.qual = 0;
-
-	range->sensitivity = 200;
-
-	/* retry limit capabilities */
-	range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->r_time_flags = IW_RETRY_LIFETIME;
-
-	/* I don't know the range. Put stupid things here */
-	range->min_retry = 1;
-	range->max_retry = 65535;
-	range->min_r_time = 1024;
-	range->max_r_time = 65535 * 1024;
-
-	/* txpower is supported in dBm's */
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	/* Event capability (kernel + driver) */
-	range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
-	IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) |
-	IW_EVENT_CAPA_MASK(SIOCGIWAP));
-	range->event_capa[1] = IW_EVENT_CAPA_K_1;
-	range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM);
-
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-		IW_ENC_CAPA_CIPHER_TKIP;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	/* Request the device for the supported frequencies
-	 * not really relevant since some devices will report the 5 GHz band
-	 * frequencies even if they don't support them.
-	 */
-	rvalue =
-	    mgt_get_request(priv, DOT11_OID_SUPPORTEDFREQUENCIES, 0, NULL, &r);
-	freq = r.ptr;
-
-	range->num_channels = freq->nr;
-	range->num_frequency = freq->nr;
-
-	m = min(IW_MAX_FREQUENCIES, (int) freq->nr);
-	for (i = 0; i < m; i++) {
-		range->freq[i].m = freq->mhz[i];
-		range->freq[i].e = 6;
-		range->freq[i].i = channel_of_freq(freq->mhz[i]);
-	}
-	kfree(freq);
-
-	rvalue |= mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r);
-	data = r.ptr;
-
-	/* We got an array of char. It is NULL terminated. */
-	i = 0;
-	while ((i < IW_MAX_BITRATES) && (*data != 0)) {
-		/*       the result must be in bps. The card gives us 500Kbps */
-		range->bitrate[i] = *data * 500000;
-		i++;
-		data++;
-	}
-	range->num_bitrates = i;
-	kfree(r.ptr);
-
-	return rvalue;
-}
-
-/* Set AP address*/
-
-static int
-prism54_set_wap(struct net_device *ndev, struct iw_request_info *info,
-		struct sockaddr *awrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	char bssid[6];
-	int rvalue;
-
-	if (awrq->sa_family != ARPHRD_ETHER)
-		return -EINVAL;
-
-	/* prepare the structure for the set object */
-	memcpy(&bssid[0], awrq->sa_data, ETH_ALEN);
-
-	/* set the bssid -- does this make sense when in AP mode? */
-	rvalue = mgt_set_request(priv, DOT11_OID_BSSID, 0, &bssid);
-
-	return (rvalue ? rvalue : -EINPROGRESS);	/* Call commit handler */
-}
-
-/* get AP address*/
-
-static int
-prism54_get_wap(struct net_device *ndev, struct iw_request_info *info,
-		struct sockaddr *awrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue;
-
-	rvalue = mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r);
-	memcpy(awrq->sa_data, r.ptr, ETH_ALEN);
-	awrq->sa_family = ARPHRD_ETHER;
-	kfree(r.ptr);
-
-	return rvalue;
-}
-
-static int
-prism54_set_scan(struct net_device *dev, struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-	/* hehe the device does this automagicaly */
-	return 0;
-}
-
-/* a little helper that will translate our data into a card independent
- * format that the Wireless Tools will understand. This was inspired by
- * the "Aironet driver for 4500 and 4800 series cards" (GPL)
- */
-
-static char *
-prism54_translate_bss(struct net_device *ndev, struct iw_request_info *info,
-		      char *current_ev, char *end_buf, struct obj_bss *bss,
-		      char noise)
-{
-	struct iw_event iwe;	/* Temporary buffer */
-	short cap;
-	islpci_private *priv = netdev_priv(ndev);
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-
-	/* The first entry must be the MAC address */
-	memcpy(iwe.u.ap_addr.sa_data, bss->address, ETH_ALEN);
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	iwe.cmd = SIOCGIWAP;
-	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-					  &iwe, IW_EV_ADDR_LEN);
-
-	/* The following entries will be displayed in the same order we give them */
-
-	/* The ESSID. */
-	iwe.u.data.length = bss->ssid.length;
-	iwe.u.data.flags = 1;
-	iwe.cmd = SIOCGIWESSID;
-	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-					  &iwe, bss->ssid.octets);
-
-	/* Capabilities */
-#define CAP_ESS 0x01
-#define CAP_IBSS 0x02
-#define CAP_CRYPT 0x10
-
-	/* Mode */
-	cap = bss->capinfo;
-	iwe.u.mode = 0;
-	if (cap & CAP_ESS)
-		iwe.u.mode = IW_MODE_MASTER;
-	else if (cap & CAP_IBSS)
-		iwe.u.mode = IW_MODE_ADHOC;
-	iwe.cmd = SIOCGIWMODE;
-	if (iwe.u.mode)
-		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-						  &iwe, IW_EV_UINT_LEN);
-
-	/* Encryption capability */
-	if (cap & CAP_CRYPT)
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-	else
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	iwe.u.data.length = 0;
-	iwe.cmd = SIOCGIWENCODE;
-	current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-					  &iwe, NULL);
-
-	/* Add frequency. (short) bss->channel is the frequency in MHz */
-	iwe.u.freq.m = bss->channel;
-	iwe.u.freq.e = 6;
-	iwe.cmd = SIOCGIWFREQ;
-	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-					  &iwe, IW_EV_FREQ_LEN);
-
-	/* Add quality statistics */
-	iwe.u.qual.level = bss->rssi;
-	iwe.u.qual.noise = noise;
-	/* do a simple SNR for quality */
-	iwe.u.qual.qual = bss->rssi - noise;
-	iwe.cmd = IWEVQUAL;
-	current_ev = iwe_stream_add_event(info, current_ev, end_buf,
-					  &iwe, IW_EV_QUAL_LEN);
-
-	/* Add WPA/RSN Information Element, if any */
-	wpa_ie_len = prism54_wpa_bss_ie_get(priv, bss->address, wpa_ie);
-	if (wpa_ie_len > 0) {
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = min_t(size_t, wpa_ie_len, MAX_WPA_IE_LEN);
-		current_ev = iwe_stream_add_point(info, current_ev, end_buf,
-						  &iwe, wpa_ie);
-	}
-	/* Do the bitrates */
-	{
-		char *current_val = current_ev + iwe_stream_lcp_len(info);
-		int i;
-		int mask;
-
-		iwe.cmd = SIOCGIWRATE;
-		/* Those two flags are ignored... */
-		iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-
-		/* Parse the bitmask */
-		mask = 0x1;
-		for(i = 0; i < sizeof(scan_rate_list); i++) {
-			if(bss->rates & mask) {
-				iwe.u.bitrate.value = (scan_rate_list[i] * 500000);
-				current_val = iwe_stream_add_value(
-					info, current_ev, current_val,
-					end_buf, &iwe, IW_EV_PARAM_LEN);
-			}
-			mask <<= 1;
-		}
-		/* Check if we added any event */
-		if ((current_val - current_ev) > iwe_stream_lcp_len(info))
-			current_ev = current_val;
-	}
-
-	return current_ev;
-}
-
-static int
-prism54_get_scan(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int i, rvalue;
-	struct obj_bsslist *bsslist;
-	u32 noise = 0;
-	char *current_ev = extra;
-	union oid_res_t r;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT) {
-		/* device is not ready, fail gently */
-		dwrq->length = 0;
-		return 0;
-	}
-
-	/* first get the noise value. We will use it to report the link quality */
-	rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
-	noise = r.u;
-
-	/* Ask the device for a list of known bss.
-	* The old API, using SIOCGIWAPLIST, had a hard limit of IW_MAX_AP=64.
-	* The new API, using SIOCGIWSCAN, is only limited by the buffer size.
-	* WE-14->WE-16, the buffer is limited to IW_SCAN_MAX_DATA bytes.
-	* Starting with WE-17, the buffer can be as big as needed.
-	* But the device won't repport anything if you change the value
-	* of IWMAX_BSS=24. */
-
-	rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r);
-	bsslist = r.ptr;
-
-	/* ok now, scan the list and translate its info */
-	for (i = 0; i < (int) bsslist->nr; i++) {
-		current_ev = prism54_translate_bss(ndev, info, current_ev,
-						   extra + dwrq->length,
-						   &(bsslist->bsslist[i]),
-						   noise);
-
-		/* Check if there is space for one more entry */
-		if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) {
-			/* Ask user space to try again with a bigger buffer */
-			rvalue = -E2BIG;
-			break;
-		}
-	}
-
-	kfree(bsslist);
-	dwrq->length = (current_ev - extra);
-	dwrq->flags = 0;	/* todo */
-
-	return rvalue;
-}
-
-static int
-prism54_set_essid(struct net_device *ndev, struct iw_request_info *info,
-		  struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct obj_ssid essid;
-
-	memset(essid.octets, 0, 33);
-
-	/* Check if we were asked for `any' */
-	if (dwrq->flags && dwrq->length) {
-		if (dwrq->length > 32)
-			return -E2BIG;
-		essid.length = dwrq->length;
-		memcpy(essid.octets, extra, dwrq->length);
-	} else
-		essid.length = 0;
-
-	if (priv->iw_mode != IW_MODE_MONITOR)
-		return mgt_set_request(priv, DOT11_OID_SSID, 0, &essid);
-
-	/* If in monitor mode, just save to mib */
-	mgt_set(priv, DOT11_OID_SSID, &essid);
-	return 0;
-
-}
-
-static int
-prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
-		  struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct obj_ssid *essid;
-	union oid_res_t r;
-	int rvalue;
-
-	rvalue = mgt_get_request(priv, DOT11_OID_SSID, 0, NULL, &r);
-	essid = r.ptr;
-
-	if (essid->length) {
-		dwrq->flags = 1;	/* set ESSID to ON for Wireless Extensions */
-		/* if it is too big, trunk it */
-		dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
-	} else {
-		dwrq->flags = 0;
-		dwrq->length = 0;
-	}
-	essid->octets[dwrq->length] = '\0';
-	memcpy(extra, essid->octets, dwrq->length);
-	kfree(essid);
-
-	return rvalue;
-}
-
-/* Provides no functionality, just completes the ioctl. In essence this is a
- * just a cosmetic ioctl.
- */
-static int
-prism54_set_nick(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	if (dwrq->length > IW_ESSID_MAX_SIZE)
-		return -E2BIG;
-
-	down_write(&priv->mib_sem);
-	memset(priv->nickname, 0, sizeof (priv->nickname));
-	memcpy(priv->nickname, extra, dwrq->length);
-	up_write(&priv->mib_sem);
-
-	return 0;
-}
-
-static int
-prism54_get_nick(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	dwrq->length = 0;
-
-	down_read(&priv->mib_sem);
-	dwrq->length = strlen(priv->nickname);
-	memcpy(extra, priv->nickname, dwrq->length);
-	up_read(&priv->mib_sem);
-
-	return 0;
-}
-
-/* Set the allowed Bitrates */
-
-static int
-prism54_set_rate(struct net_device *ndev,
-		 struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-
-	islpci_private *priv = netdev_priv(ndev);
-	u32 rate, profile;
-	char *data;
-	int ret, i;
-	union oid_res_t r;
-
-	if (vwrq->value == -1) {
-		/* auto mode. No limit. */
-		profile = 1;
-		return mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile);
-	}
-
-	ret = mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r);
-	if (ret) {
-		kfree(r.ptr);
-		return ret;
-	}
-
-	rate = (u32) (vwrq->value / 500000);
-	data = r.ptr;
-	i = 0;
-
-	while (data[i]) {
-		if (rate && (data[i] == rate)) {
-			break;
-		}
-		if (vwrq->value == i) {
-			break;
-		}
-		data[i] |= 0x80;
-		i++;
-	}
-
-	if (!data[i]) {
-		kfree(r.ptr);
-		return -EINVAL;
-	}
-
-	data[i] |= 0x80;
-	data[i + 1] = 0;
-
-	/* Now, check if we want a fixed or auto value */
-	if (vwrq->fixed) {
-		data[0] = data[i];
-		data[1] = 0;
-	}
-
-/*
-	i = 0;
-	printk("prism54 rate: ");
-	while(data[i]) {
-		printk("%u ", data[i]);
-		i++;
-	}
-	printk("0\n");
-*/
-	profile = -1;
-	ret = mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile);
-	ret |= mgt_set_request(priv, DOT11_OID_EXTENDEDRATES, 0, data);
-	ret |= mgt_set_request(priv, DOT11_OID_RATES, 0, data);
-
-	kfree(r.ptr);
-
-	return ret;
-}
-
-/* Get the current bit rate */
-static int
-prism54_get_rate(struct net_device *ndev,
-		 struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int rvalue;
-	char *data;
-	union oid_res_t r;
-
-	/* Get the current bit rate */
-	if ((rvalue = mgt_get_request(priv, GEN_OID_LINKSTATE, 0, NULL, &r)))
-		return rvalue;
-	vwrq->value = r.u * 500000;
-
-	/* request the device for the enabled rates */
-	rvalue = mgt_get_request(priv, DOT11_OID_RATES, 0, NULL, &r);
-	if (rvalue) {
-		kfree(r.ptr);
-		return rvalue;
-	}
-	data = r.ptr;
-	vwrq->fixed = (data[0] != 0) && (data[1] == 0);
-	kfree(r.ptr);
-
-	return 0;
-}
-
-static int
-prism54_set_rts(struct net_device *ndev, struct iw_request_info *info,
-		struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	return mgt_set_request(priv, DOT11_OID_RTSTHRESH, 0, &vwrq->value);
-}
-
-static int
-prism54_get_rts(struct net_device *ndev, struct iw_request_info *info,
-		struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue;
-
-	/* get the rts threshold */
-	rvalue = mgt_get_request(priv, DOT11_OID_RTSTHRESH, 0, NULL, &r);
-	vwrq->value = r.u;
-
-	return rvalue;
-}
-
-static int
-prism54_set_frag(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	return mgt_set_request(priv, DOT11_OID_FRAGTHRESH, 0, &vwrq->value);
-}
-
-static int
-prism54_get_frag(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue;
-
-	rvalue = mgt_get_request(priv, DOT11_OID_FRAGTHRESH, 0, NULL, &r);
-	vwrq->value = r.u;
-
-	return rvalue;
-}
-
-/* Here we have (min,max) = max retries for (small frames, big frames). Where
- * big frame <=>  bigger than the rts threshold
- * small frame <=>  smaller than the rts threshold
- * This is not really the behavior expected by the wireless tool but it seems
- * to be a common behavior in other drivers.
- */
-
-static int
-prism54_set_retry(struct net_device *ndev, struct iw_request_info *info,
-		  struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	u32 slimit = 0, llimit = 0;	/* short and long limit */
-	u32 lifetime = 0;
-	int rvalue = 0;
-
-	if (vwrq->disabled)
-		/* we cannot disable this feature */
-		return -EINVAL;
-
-	if (vwrq->flags & IW_RETRY_LIMIT) {
-		if (vwrq->flags & IW_RETRY_SHORT)
-			slimit = vwrq->value;
-		else if (vwrq->flags & IW_RETRY_LONG)
-			llimit = vwrq->value;
-		else {
-			/* we are asked to set both */
-			slimit = vwrq->value;
-			llimit = vwrq->value;
-		}
-	}
-	if (vwrq->flags & IW_RETRY_LIFETIME)
-		/* Wireless tools use us unit while the device uses 1024 us unit */
-		lifetime = vwrq->value / 1024;
-
-	/* now set what is requested */
-	if (slimit)
-		rvalue =
-		    mgt_set_request(priv, DOT11_OID_SHORTRETRIES, 0, &slimit);
-	if (llimit)
-		rvalue |=
-		    mgt_set_request(priv, DOT11_OID_LONGRETRIES, 0, &llimit);
-	if (lifetime)
-		rvalue |=
-		    mgt_set_request(priv, DOT11_OID_MAXTXLIFETIME, 0,
-				    &lifetime);
-	return rvalue;
-}
-
-static int
-prism54_get_retry(struct net_device *ndev, struct iw_request_info *info,
-		  struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue = 0;
-	vwrq->disabled = 0;	/* It cannot be disabled */
-
-	if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
-		/* we are asked for the life time */
-		rvalue =
-		    mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r);
-		vwrq->value = r.u * 1024;
-		vwrq->flags = IW_RETRY_LIFETIME;
-	} else if ((vwrq->flags & IW_RETRY_LONG)) {
-		/* we are asked for the long retry limit */
-		rvalue |=
-		    mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r);
-		vwrq->value = r.u;
-		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
-	} else {
-		/* default. get the  short retry limit */
-		rvalue |=
-		    mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r);
-		vwrq->value = r.u;
-		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_SHORT;
-	}
-
-	return rvalue;
-}
-
-static int
-prism54_set_encode(struct net_device *ndev, struct iw_request_info *info,
-		   struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int rvalue = 0, force = 0;
-	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0;
-	union oid_res_t r;
-
-	/* with the new API, it's impossible to get a NULL pointer.
-	 * New version of iwconfig set the IW_ENCODE_NOKEY flag
-	 * when no key is given, but older versions don't. */
-
-	if (dwrq->length > 0) {
-		/* we have a key to set */
-		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-		int current_index;
-		struct obj_key key = { DOT11_PRIV_WEP, 0, "" };
-
-		/* get the current key index */
-		rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
-		current_index = r.u;
-		/* Verify that the key is not marked as invalid */
-		if (!(dwrq->flags & IW_ENCODE_NOKEY)) {
-			if (dwrq->length > KEY_SIZE_TKIP) {
-				/* User-provided key data too big */
-				return -EINVAL;
-			}
-			if (dwrq->length > KEY_SIZE_WEP104) {
-				/* WPA-PSK TKIP */
-				key.type = DOT11_PRIV_TKIP;
-				key.length = KEY_SIZE_TKIP;
-			} else if (dwrq->length > KEY_SIZE_WEP40) {
-				/* WEP 104/128 */
-				key.length = KEY_SIZE_WEP104;
-			} else {
-				/* WEP 40/64 */
-				key.length = KEY_SIZE_WEP40;
-			}
-			memset(key.key, 0, sizeof (key.key));
-			memcpy(key.key, extra, dwrq->length);
-
-			if ((index < 0) || (index > 3))
-				/* no index provided use the current one */
-				index = current_index;
-
-			/* now send the key to the card  */
-			rvalue |=
-			    mgt_set_request(priv, DOT11_OID_DEFKEYX, index,
-					    &key);
-		}
-		/*
-		 * If a valid key is set, encryption should be enabled
-		 * (user may turn it off later).
-		 * This is also how "iwconfig ethX key on" works
-		 */
-		if ((index == current_index) && (key.length > 0))
-			force = 1;
-	} else {
-		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-		if ((index >= 0) && (index <= 3)) {
-			/* we want to set the key index */
-			rvalue |=
-			    mgt_set_request(priv, DOT11_OID_DEFKEYID, 0,
-					    &index);
-		} else {
-			if (!(dwrq->flags & IW_ENCODE_MODE)) {
-				/* we cannot do anything. Complain. */
-				return -EINVAL;
-			}
-		}
-	}
-	/* now read the flags */
-	if (dwrq->flags & IW_ENCODE_DISABLED) {
-		/* Encoding disabled,
-		 * authen = DOT11_AUTH_OS;
-		 * invoke = 0;
-		 * exunencrypt = 0; */
-	}
-	if (dwrq->flags & IW_ENCODE_OPEN)
-		/* Encode but accept non-encoded packets. No auth */
-		invoke = 1;
-	if ((dwrq->flags & IW_ENCODE_RESTRICTED) || force) {
-		/* Refuse non-encoded packets. Auth */
-		authen = DOT11_AUTH_BOTH;
-		invoke = 1;
-		exunencrypt = 1;
-	}
-	/* do the change if requested  */
-	if ((dwrq->flags & IW_ENCODE_MODE) || force) {
-		rvalue |=
-		    mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
-		rvalue |=
-		    mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke);
-		rvalue |=
-		    mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0,
-				    &exunencrypt);
-	}
-	return rvalue;
-}
-
-static int
-prism54_get_encode(struct net_device *ndev, struct iw_request_info *info,
-		   struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct obj_key *key;
-	u32 devindex, index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
-	u32 authen = 0, invoke = 0, exunencrypt = 0;
-	int rvalue;
-	union oid_res_t r;
-
-	/* first get the flags */
-	rvalue = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r);
-	authen = r.u;
-	rvalue |= mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r);
-	invoke = r.u;
-	rvalue |= mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r);
-	exunencrypt = r.u;
-
-	if (invoke && (authen == DOT11_AUTH_BOTH) && exunencrypt)
-		dwrq->flags = IW_ENCODE_RESTRICTED;
-	else if ((authen == DOT11_AUTH_OS) && !exunencrypt) {
-		if (invoke)
-			dwrq->flags = IW_ENCODE_OPEN;
-		else
-			dwrq->flags = IW_ENCODE_DISABLED;
-	} else
-		/* The card should not work in this state */
-		dwrq->flags = 0;
-
-	/* get the current device key index */
-	rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
-	devindex = r.u;
-	/* Now get the key, return it */
-	if (index == -1 || index > 3)
-		/* no index provided, use the current one */
-		index = devindex;
-	rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYX, index, NULL, &r);
-	key = r.ptr;
-	dwrq->length = key->length;
-	memcpy(extra, key->key, dwrq->length);
-	kfree(key);
-	/* return the used key index */
-	dwrq->flags |= devindex + 1;
-
-	return rvalue;
-}
-
-static int
-prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info,
-		    struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	union oid_res_t r;
-	int rvalue;
-
-	rvalue = mgt_get_request(priv, OID_INL_OUTPUTPOWER, 0, NULL, &r);
-	/* intersil firmware operates in 0.25 dBm (1/4 dBm) */
-	vwrq->value = (s32) r.u / 4;
-	vwrq->fixed = 1;
-	/* radio is not turned of
-	 * btw: how is possible to turn off only the radio
-	 */
-	vwrq->disabled = 0;
-
-	return rvalue;
-}
-
-static int
-prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info,
-		    struct iw_param *vwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	s32 u = vwrq->value;
-
-	/* intersil firmware operates in 0.25 dBm (1/4) */
-	u *= 4;
-	if (vwrq->disabled) {
-		/* don't know how to disable radio */
-		printk(KERN_DEBUG
-		       "%s: %s() disabling radio is not yet supported.\n",
-		       priv->ndev->name, __func__);
-		return -ENOTSUPP;
-	} else if (vwrq->fixed)
-		/* currently only fixed value is supported */
-		return mgt_set_request(priv, OID_INL_OUTPUTPOWER, 0, &u);
-	else {
-		printk(KERN_DEBUG
-		       "%s: %s() auto power will be implemented later.\n",
-		       priv->ndev->name, __func__);
-		return -ENOTSUPP;
-	}
-}
-
-static int prism54_set_genie(struct net_device *ndev,
-			     struct iw_request_info *info,
-			     struct iw_point *data, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int alen, ret = 0;
-	struct obj_attachment *attach;
-
-	if (data->length > MAX_WPA_IE_LEN ||
-	    (data->length && extra == NULL))
-		return -EINVAL;
-
-	memcpy(priv->wpa_ie, extra, data->length);
-	priv->wpa_ie_len = data->length;
-
-	alen = sizeof(*attach) + priv->wpa_ie_len;
-	attach = kzalloc(alen, GFP_KERNEL);
-	if (attach == NULL)
-		return -ENOMEM;
-
-#define WLAN_FC_TYPE_MGMT 0
-#define WLAN_FC_STYPE_ASSOC_REQ 0
-#define WLAN_FC_STYPE_REASSOC_REQ 2
-
-	/* Note: endianness is covered by mgt_set_varlen */
-	attach->type = (WLAN_FC_TYPE_MGMT << 2) |
-               (WLAN_FC_STYPE_ASSOC_REQ << 4);
-	attach->id = -1;
-	attach->size = priv->wpa_ie_len;
-	memcpy(attach->data, extra, priv->wpa_ie_len);
-
-	ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach,
-		priv->wpa_ie_len);
-	if (ret == 0) {
-		attach->type = (WLAN_FC_TYPE_MGMT << 2) |
-			(WLAN_FC_STYPE_REASSOC_REQ << 4);
-
-		ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach,
-			priv->wpa_ie_len);
-		if (ret == 0)
-			printk(KERN_DEBUG "%s: WPA IE Attachment was set\n",
-				ndev->name);
-	}
-
-	kfree(attach);
-	return ret;
-}
-
-
-static int prism54_get_genie(struct net_device *ndev,
-			     struct iw_request_info *info,
-			     struct iw_point *data, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int len = priv->wpa_ie_len;
-
-	if (len <= 0) {
-		data->length = 0;
-		return 0;
-	}
-
-	if (data->length < len)
-		return -E2BIG;
-
-	data->length = len;
-	memcpy(extra, priv->wpa_ie, len);
-
-	return 0;
-}
-
-static int prism54_set_auth(struct net_device *ndev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct iw_param *param = &wrqu->param;
-	u32 mlmelevel = 0, authen = 0, dot1x = 0;
-	u32 exunencrypt = 0, privinvoked = 0, wpa = 0;
-	u32 old_wpa;
-	int ret = 0;
-	union oid_res_t r;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	/* first get the flags */
-	down_write(&priv->mib_sem);
-	wpa = old_wpa = priv->wpa;
-	up_write(&priv->mib_sem);
-	ret = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r);
-	authen = r.u;
-	ret = mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r);
-	privinvoked = r.u;
-	ret = mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r);
-	exunencrypt = r.u;
-	ret = mgt_get_request(priv, DOT11_OID_DOT1XENABLE, 0, NULL, &r);
-	dot1x = r.u;
-	ret = mgt_get_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, NULL, &r);
-	mlmelevel = r.u;
-
-	if (ret < 0)
-		goto out;
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_KEY_MGMT:
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		/* Do the same thing as IW_AUTH_WPA_VERSION */
-		if (param->value) {
-			wpa = 1;
-			privinvoked = 1; /* For privacy invoked */
-			exunencrypt = 1; /* Filter out all unencrypted frames */
-			dot1x = 0x01; /* To enable eap filter */
-			mlmelevel = DOT11_MLME_EXTENDED;
-			authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */
-		} else {
-			wpa = 0;
-			privinvoked = 0;
-			exunencrypt = 0; /* Do not filter un-encrypted data */
-			dot1x = 0;
-			mlmelevel = DOT11_MLME_AUTO;
-		}
-		break;
-
-	case IW_AUTH_WPA_VERSION:
-		if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
-			wpa = 0;
-			privinvoked = 0;
-			exunencrypt = 0; /* Do not filter un-encrypted data */
-			dot1x = 0;
-			mlmelevel = DOT11_MLME_AUTO;
-		} else {
-			if (param->value & IW_AUTH_WPA_VERSION_WPA)
-				wpa = 1;
-			else if (param->value & IW_AUTH_WPA_VERSION_WPA2)
-				wpa = 2;
-			privinvoked = 1; /* For privacy invoked */
-			exunencrypt = 1; /* Filter out all unencrypted frames */
-			dot1x = 0x01; /* To enable eap filter */
-			mlmelevel = DOT11_MLME_EXTENDED;
-			authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */
-		}
-		break;
-
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		/* dot1x should be the opposite of RX_UNENCRYPTED_EAPOL;
-		 * turn off dot1x when allowing receipt of unencrypted EAPOL
-		 * frames, turn on dot1x when receipt should be disallowed
-		 */
-		dot1x = param->value ? 0 : 0x01;
-		break;
-
-	case IW_AUTH_PRIVACY_INVOKED:
-		privinvoked = param->value ? 1 : 0;
-		break;
-
-	case IW_AUTH_DROP_UNENCRYPTED:
-		exunencrypt = param->value ? 1 : 0;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		if (param->value & IW_AUTH_ALG_SHARED_KEY) {
-			/* Only WEP uses _SK and _BOTH */
-			if (wpa > 0) {
-				ret = -EINVAL;
-				goto out;
-			}
-			authen = DOT11_AUTH_SK;
-		} else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
-			authen = DOT11_AUTH_OS;
-		} else {
-			ret = -EINVAL;
-			goto out;
-		}
-		break;
-
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	/* Set all the values */
-	down_write(&priv->mib_sem);
-	priv->wpa = wpa;
-	up_write(&priv->mib_sem);
-	mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
-	mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &privinvoked);
-	mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &exunencrypt);
-	mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x);
-	mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlmelevel);
-
-out:
-	return ret;
-}
-
-static int prism54_get_auth(struct net_device *ndev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct iw_param *param = &wrqu->param;
-	u32 wpa = 0;
-	int ret = 0;
-	union oid_res_t r;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	/* first get the flags */
-	down_write(&priv->mib_sem);
-	wpa = priv->wpa;
-	up_write(&priv->mib_sem);
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_KEY_MGMT:
-		/*
-		 * wpa_supplicant will control these internally
-		 */
-		ret = -EOPNOTSUPP;
-		break;
-
-	case IW_AUTH_WPA_VERSION:
-		switch (wpa) {
-		case 1:
-			param->value = IW_AUTH_WPA_VERSION_WPA;
-			break;
-		case 2:
-			param->value = IW_AUTH_WPA_VERSION_WPA2;
-			break;
-		case 0:
-		default:
-			param->value = IW_AUTH_WPA_VERSION_DISABLED;
-			break;
-		}
-		break;
-
-	case IW_AUTH_DROP_UNENCRYPTED:
-		ret = mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r);
-		if (ret >= 0)
-			param->value = r.u > 0 ? 1 : 0;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		ret = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r);
-		if (ret >= 0) {
-			switch (r.u) {
-			case DOT11_AUTH_OS:
-				param->value = IW_AUTH_ALG_OPEN_SYSTEM;
-				break;
-			case DOT11_AUTH_BOTH:
-			case DOT11_AUTH_SK:
-				param->value = IW_AUTH_ALG_SHARED_KEY;
-				break;
-			case DOT11_AUTH_NONE:
-			default:
-				param->value = 0;
-				break;
-			}
-		}
-		break;
-
-	case IW_AUTH_WPA_ENABLED:
-		param->value = wpa > 0 ? 1 : 0;
-		break;
-
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		ret = mgt_get_request(priv, DOT11_OID_DOT1XENABLE, 0, NULL, &r);
-		if (ret >= 0)
-			param->value = r.u > 0 ? 1 : 0;
-		break;
-
-	case IW_AUTH_PRIVACY_INVOKED:
-		ret = mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r);
-		if (ret >= 0)
-			param->value = r.u > 0 ? 1 : 0;
-		break;
-
-	default:
-		return -EOPNOTSUPP;
-	}
-	return ret;
-}
-
-static int prism54_set_encodeext(struct net_device *ndev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, alg = ext->alg, set_key = 1;
-	union oid_res_t r;
-	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0;
-	int ret = 0;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	/* Determine and validate the key index */
-	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-	if (idx) {
-		if (idx < 0 || idx > 3)
-			return -EINVAL;
-	} else {
-		ret = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
-		if (ret < 0)
-			goto out;
-		idx = r.u;
-	}
-
-	if (encoding->flags & IW_ENCODE_DISABLED)
-		alg = IW_ENCODE_ALG_NONE;
-
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		/* Only set transmit key index here, actual
-		 * key is set below if needed.
-		 */
-		ret = mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, &idx);
-		set_key = ext->key_len > 0 ? 1 : 0;
-	}
-
-	if (set_key) {
-		struct obj_key key = { DOT11_PRIV_WEP, 0, "" };
-		switch (alg) {
-		case IW_ENCODE_ALG_NONE:
-			break;
-		case IW_ENCODE_ALG_WEP:
-			if (ext->key_len > KEY_SIZE_WEP104) {
-				ret = -EINVAL;
-				goto out;
-			}
-			if (ext->key_len > KEY_SIZE_WEP40)
-				key.length = KEY_SIZE_WEP104;
-			else
-				key.length = KEY_SIZE_WEP40;
-			break;
-		case IW_ENCODE_ALG_TKIP:
-			if (ext->key_len > KEY_SIZE_TKIP) {
-				ret = -EINVAL;
-				goto out;
-			}
-			key.type = DOT11_PRIV_TKIP;
-			key.length = KEY_SIZE_TKIP;
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		if (key.length) {
-			memset(key.key, 0, sizeof(key.key));
-			memcpy(key.key, ext->key, ext->key_len);
-			ret = mgt_set_request(priv, DOT11_OID_DEFKEYX, idx,
-					    &key);
-			if (ret < 0)
-				goto out;
-		}
-	}
-
-	/* Read the flags */
-	if (encoding->flags & IW_ENCODE_DISABLED) {
-		/* Encoding disabled,
-		 * authen = DOT11_AUTH_OS;
-		 * invoke = 0;
-		 * exunencrypt = 0; */
-	}
-	if (encoding->flags & IW_ENCODE_OPEN) {
-		/* Encode but accept non-encoded packets. No auth */
-		invoke = 1;
-	}
-	if (encoding->flags & IW_ENCODE_RESTRICTED) {
-		/* Refuse non-encoded packets. Auth */
-		authen = DOT11_AUTH_BOTH;
-		invoke = 1;
-		exunencrypt = 1;
-	}
-
-	/* do the change if requested  */
-	if (encoding->flags & IW_ENCODE_MODE) {
-		ret = mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0,
-				      &authen);
-		ret = mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0,
-				      &invoke);
-		ret = mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0,
-				      &exunencrypt);
-	}
-
-out:
-	return ret;
-}
-
-
-static int prism54_get_encodeext(struct net_device *ndev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, max_key_len;
-	union oid_res_t r;
-	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0, wpa = 0;
-	int ret = 0;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	/* first get the flags */
-	ret = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r);
-	authen = r.u;
-	ret = mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r);
-	invoke = r.u;
-	ret = mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r);
-	exunencrypt = r.u;
-	if (ret < 0)
-		goto out;
-
-	max_key_len = encoding->length - sizeof(*ext);
-	if (max_key_len < 0)
-		return -EINVAL;
-
-	idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
-	if (idx) {
-		if (idx < 0 || idx > 3)
-			return -EINVAL;
-	} else {
-		ret = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
-		if (ret < 0)
-			goto out;
-		idx = r.u;
-	}
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	switch (authen) {
-	case DOT11_AUTH_BOTH:
-	case DOT11_AUTH_SK:
-		wrqu->encoding.flags |= IW_ENCODE_RESTRICTED;
-		fallthrough;
-	case DOT11_AUTH_OS:
-	default:
-		wrqu->encoding.flags |= IW_ENCODE_OPEN;
-		break;
-	}
-
-	down_write(&priv->mib_sem);
-	wpa = priv->wpa;
-	up_write(&priv->mib_sem);
-
-	if (authen == DOT11_AUTH_OS && !exunencrypt && !invoke && !wpa) {
-		/* No encryption */
-		ext->alg = IW_ENCODE_ALG_NONE;
-		ext->key_len = 0;
-		wrqu->encoding.flags |= IW_ENCODE_DISABLED;
-	} else {
-		struct obj_key *key;
-
-		ret = mgt_get_request(priv, DOT11_OID_DEFKEYX, idx, NULL, &r);
-		if (ret < 0)
-			goto out;
-		key = r.ptr;
-		if (max_key_len < key->length) {
-			ret = -E2BIG;
-			goto out;
-		}
-		memcpy(ext->key, key->key, key->length);
-		ext->key_len = key->length;
-
-		switch (key->type) {
-		case DOT11_PRIV_TKIP:
-			ext->alg = IW_ENCODE_ALG_TKIP;
-			break;
-		default:
-		case DOT11_PRIV_WEP:
-			ext->alg = IW_ENCODE_ALG_WEP;
-			break;
-		}
-		wrqu->encoding.flags |= IW_ENCODE_ENABLED;
-	}
-
-out:
-	return ret;
-}
-
-
-static int
-prism54_reset(struct net_device *ndev, struct iw_request_info *info,
-	      __u32 * uwrq, char *extra)
-{
-	islpci_reset(netdev_priv(ndev), 0);
-
-	return 0;
-}
-
-static int
-prism54_get_oid(struct net_device *ndev, struct iw_request_info *info,
-		struct iw_point *dwrq, char *extra)
-{
-	union oid_res_t r;
-	int rvalue;
-	enum oid_num_t n = dwrq->flags;
-
-	rvalue = mgt_get_request(netdev_priv(ndev), n, 0, NULL, &r);
-	dwrq->length = mgt_response_to_str(n, &r, extra);
-	if ((isl_oid[n].flags & OID_FLAG_TYPE) != OID_TYPE_U32)
-		kfree(r.ptr);
-	return rvalue;
-}
-
-static int
-prism54_set_u32(struct net_device *ndev, struct iw_request_info *info,
-		__u32 * uwrq, char *extra)
-{
-	u32 oid = uwrq[0], u = uwrq[1];
-
-	return mgt_set_request(netdev_priv(ndev), oid, 0, &u);
-}
-
-static int
-prism54_set_raw(struct net_device *ndev, struct iw_request_info *info,
-		struct iw_point *dwrq, char *extra)
-{
-	u32 oid = dwrq->flags;
-
-	return mgt_set_request(netdev_priv(ndev), oid, 0, extra);
-}
-
-void
-prism54_acl_init(struct islpci_acl *acl)
-{
-	mutex_init(&acl->lock);
-	INIT_LIST_HEAD(&acl->mac_list);
-	acl->size = 0;
-	acl->policy = MAC_POLICY_OPEN;
-}
-
-static void
-prism54_clear_mac(struct islpci_acl *acl)
-{
-	struct list_head *ptr, *next;
-	struct mac_entry *entry;
-
-	mutex_lock(&acl->lock);
-
-	if (acl->size == 0) {
-		mutex_unlock(&acl->lock);
-		return;
-	}
-
-	for (ptr = acl->mac_list.next, next = ptr->next;
-	     ptr != &acl->mac_list; ptr = next, next = ptr->next) {
-		entry = list_entry(ptr, struct mac_entry, _list);
-		list_del(ptr);
-		kfree(entry);
-	}
-	acl->size = 0;
-	mutex_unlock(&acl->lock);
-}
-
-void
-prism54_acl_clean(struct islpci_acl *acl)
-{
-	prism54_clear_mac(acl);
-}
-
-static int
-prism54_add_mac(struct net_device *ndev, struct iw_request_info *info,
-		struct sockaddr *awrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_acl *acl = &priv->acl;
-	struct mac_entry *entry;
-	struct sockaddr *addr = (struct sockaddr *) extra;
-
-	if (addr->sa_family != ARPHRD_ETHER)
-		return -EOPNOTSUPP;
-
-	entry = kmalloc(sizeof (struct mac_entry), GFP_KERNEL);
-	if (entry == NULL)
-		return -ENOMEM;
-
-	memcpy(entry->addr, addr->sa_data, ETH_ALEN);
-
-	if (mutex_lock_interruptible(&acl->lock)) {
-		kfree(entry);
-		return -ERESTARTSYS;
-	}
-	list_add_tail(&entry->_list, &acl->mac_list);
-	acl->size++;
-	mutex_unlock(&acl->lock);
-
-	return 0;
-}
-
-static int
-prism54_del_mac(struct net_device *ndev, struct iw_request_info *info,
-		struct sockaddr *awrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_acl *acl = &priv->acl;
-	struct mac_entry *entry;
-	struct sockaddr *addr = (struct sockaddr *) extra;
-
-	if (addr->sa_family != ARPHRD_ETHER)
-		return -EOPNOTSUPP;
-
-	if (mutex_lock_interruptible(&acl->lock))
-		return -ERESTARTSYS;
-	list_for_each_entry(entry, &acl->mac_list, _list) {
-		if (ether_addr_equal(entry->addr, addr->sa_data)) {
-			list_del(&entry->_list);
-			acl->size--;
-			kfree(entry);
-			mutex_unlock(&acl->lock);
-			return 0;
-		}
-	}
-	mutex_unlock(&acl->lock);
-	return -EINVAL;
-}
-
-static int
-prism54_get_mac(struct net_device *ndev, struct iw_request_info *info,
-		struct iw_point *dwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_acl *acl = &priv->acl;
-	struct mac_entry *entry;
-	struct sockaddr *dst = (struct sockaddr *) extra;
-
-	dwrq->length = 0;
-
-	if (mutex_lock_interruptible(&acl->lock))
-		return -ERESTARTSYS;
-
-	list_for_each_entry(entry, &acl->mac_list, _list) {
-		memcpy(dst->sa_data, entry->addr, ETH_ALEN);
-		dst->sa_family = ARPHRD_ETHER;
-		dwrq->length++;
-		dst++;
-	}
-	mutex_unlock(&acl->lock);
-	return 0;
-}
-
-/* Setting policy also clears the MAC acl, even if we don't change the default
- * policy
- */
-
-static int
-prism54_set_policy(struct net_device *ndev, struct iw_request_info *info,
-		   __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_acl *acl = &priv->acl;
-	u32 mlmeautolevel;
-
-	prism54_clear_mac(acl);
-
-	if ((*uwrq < MAC_POLICY_OPEN) || (*uwrq > MAC_POLICY_REJECT))
-		return -EINVAL;
-
-	down_write(&priv->mib_sem);
-
-	acl->policy = *uwrq;
-
-	/* the ACL code needs an intermediate mlmeautolevel */
-	if ((priv->iw_mode == IW_MODE_MASTER) &&
-	    (acl->policy != MAC_POLICY_OPEN))
-		mlmeautolevel = DOT11_MLME_INTERMEDIATE;
-	else
-		mlmeautolevel = CARD_DEFAULT_MLME_MODE;
-	if (priv->wpa)
-		mlmeautolevel = DOT11_MLME_EXTENDED;
-	mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel);
-	/* restart the card with our new policy */
-	if (mgt_commit(priv)) {
-		up_write(&priv->mib_sem);
-		return -EIO;
-	}
-	up_write(&priv->mib_sem);
-
-	return 0;
-}
-
-static int
-prism54_get_policy(struct net_device *ndev, struct iw_request_info *info,
-		   __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_acl *acl = &priv->acl;
-
-	*uwrq = acl->policy;
-
-	return 0;
-}
-
-/* Return 1 only if client should be accepted. */
-
-static int
-prism54_mac_accept(struct islpci_acl *acl, char *mac)
-{
-	struct mac_entry *entry;
-	int res = 0;
-
-	if (mutex_lock_interruptible(&acl->lock))
-		return -ERESTARTSYS;
-
-	if (acl->policy == MAC_POLICY_OPEN) {
-		mutex_unlock(&acl->lock);
-		return 1;
-	}
-
-	list_for_each_entry(entry, &acl->mac_list, _list) {
-		if (memcmp(entry->addr, mac, ETH_ALEN) == 0) {
-			res = 1;
-			break;
-		}
-	}
-	res = (acl->policy == MAC_POLICY_ACCEPT) ? !res : res;
-	mutex_unlock(&acl->lock);
-
-	return res;
-}
-
-static int
-prism54_kick_all(struct net_device *ndev, struct iw_request_info *info,
-		 struct iw_point *dwrq, char *extra)
-{
-	struct obj_mlme *mlme;
-	int rvalue;
-
-	mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL);
-	if (mlme == NULL)
-		return -ENOMEM;
-
-	/* Tell the card to kick every client */
-	mlme->id = 0;
-	rvalue =
-	    mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme);
-	kfree(mlme);
-
-	return rvalue;
-}
-
-static int
-prism54_kick_mac(struct net_device *ndev, struct iw_request_info *info,
-		 struct sockaddr *awrq, char *extra)
-{
-	struct obj_mlme *mlme;
-	struct sockaddr *addr = (struct sockaddr *) extra;
-	int rvalue;
-
-	if (addr->sa_family != ARPHRD_ETHER)
-		return -EOPNOTSUPP;
-
-	mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL);
-	if (mlme == NULL)
-		return -ENOMEM;
-
-	/* Tell the card to only kick the corresponding bastard */
-	memcpy(mlme->address, addr->sa_data, ETH_ALEN);
-	mlme->id = -1;
-	rvalue =
-	    mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme);
-
-	kfree(mlme);
-
-	return rvalue;
-}
-
-/* Translate a TRAP oid into a wireless event. Called in islpci_mgt_receive. */
-
-static void
-format_event(islpci_private *priv, char *dest, const char *str,
-	     const struct obj_mlme *mlme, u16 *length, int error)
-{
-	int n = snprintf(dest, IW_CUSTOM_MAX,
-			 "%s %s %pM %s (%2.2X)",
-			 str,
-			 ((priv->iw_mode == IW_MODE_MASTER) ? "from" : "to"),
-			 mlme->address,
-			 (error ? (mlme->code ? " : REJECTED " : " : ACCEPTED ")
-			  : ""), mlme->code);
-	WARN_ON(n >= IW_CUSTOM_MAX);
-	*length = n;
-}
-
-static void
-send_formatted_event(islpci_private *priv, const char *str,
-		     const struct obj_mlme *mlme, int error)
-{
-	union iwreq_data wrqu;
-	char *memptr;
-
-	memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL);
-	if (!memptr)
-		return;
-	wrqu.data.pointer = memptr;
-	wrqu.data.length = 0;
-	format_event(priv, memptr, str, mlme, &wrqu.data.length,
-		     error);
-	wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr);
-	kfree(memptr);
-}
-
-static void
-send_simple_event(islpci_private *priv, const char *str)
-{
-	union iwreq_data wrqu;
-	char *memptr;
-	int n = strlen(str);
-
-	memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL);
-	if (!memptr)
-		return;
-	BUG_ON(n >= IW_CUSTOM_MAX);
-	wrqu.data.pointer = memptr;
-	wrqu.data.length = n;
-	strcpy(memptr, str);
-	wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr);
-	kfree(memptr);
-}
-
-static void
-link_changed(struct net_device *ndev, u32 bitrate)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	if (bitrate) {
-		netif_carrier_on(ndev);
-		if (priv->iw_mode == IW_MODE_INFRA) {
-			union iwreq_data uwrq;
-			prism54_get_wap(ndev, NULL, (struct sockaddr *) &uwrq,
-					NULL);
-			wireless_send_event(ndev, SIOCGIWAP, &uwrq, NULL);
-		} else
-			send_simple_event(netdev_priv(ndev),
-					  "Link established");
-	} else {
-		netif_carrier_off(ndev);
-		send_simple_event(netdev_priv(ndev), "Link lost");
-	}
-}
-
-/* Beacon/ProbeResp payload header */
-struct ieee80211_beacon_phdr {
-	u8 timestamp[8];
-	u16 beacon_int;
-	u16 capab_info;
-} __packed;
-
-#define WLAN_EID_GENERIC 0xdd
-static u8 wpa_oid[4] = { 0x00, 0x50, 0xf2, 1 };
-
-static void
-prism54_wpa_bss_ie_add(islpci_private *priv, u8 *bssid,
-		       u8 *wpa_ie, size_t wpa_ie_len)
-{
-	struct list_head *ptr;
-	struct islpci_bss_wpa_ie *bss = NULL;
-
-	if (wpa_ie_len > MAX_WPA_IE_LEN)
-		wpa_ie_len = MAX_WPA_IE_LEN;
-
-	mutex_lock(&priv->wpa_lock);
-
-	/* try to use existing entry */
-	list_for_each(ptr, &priv->bss_wpa_list) {
-		bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
-		if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) {
-			list_move(&bss->list, &priv->bss_wpa_list);
-			break;
-		}
-		bss = NULL;
-	}
-
-	if (bss == NULL) {
-		/* add a new BSS entry; if max number of entries is already
-		 * reached, replace the least recently updated */
-		if (priv->num_bss_wpa >= MAX_BSS_WPA_IE_COUNT) {
-			bss = list_entry(priv->bss_wpa_list.prev,
-					 struct islpci_bss_wpa_ie, list);
-			list_del(&bss->list);
-		} else {
-			bss = kzalloc(sizeof (*bss), GFP_ATOMIC);
-			if (bss != NULL)
-				priv->num_bss_wpa++;
-		}
-		if (bss != NULL) {
-			memcpy(bss->bssid, bssid, ETH_ALEN);
-			list_add(&bss->list, &priv->bss_wpa_list);
-		}
-	}
-
-	if (bss != NULL) {
-		memcpy(bss->wpa_ie, wpa_ie, wpa_ie_len);
-		bss->wpa_ie_len = wpa_ie_len;
-		bss->last_update = jiffies;
-	} else {
-		printk(KERN_DEBUG "Failed to add BSS WPA entry for "
-		       "%pM\n", bssid);
-	}
-
-	/* expire old entries from WPA list */
-	while (priv->num_bss_wpa > 0) {
-		bss = list_entry(priv->bss_wpa_list.prev,
-				 struct islpci_bss_wpa_ie, list);
-		if (!time_after(jiffies, bss->last_update + 60 * HZ))
-			break;
-
-		list_del(&bss->list);
-		priv->num_bss_wpa--;
-		kfree(bss);
-	}
-
-	mutex_unlock(&priv->wpa_lock);
-}
-
-static size_t
-prism54_wpa_bss_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie)
-{
-	struct list_head *ptr;
-	struct islpci_bss_wpa_ie *bss = NULL;
-	size_t len = 0;
-
-	mutex_lock(&priv->wpa_lock);
-
-	list_for_each(ptr, &priv->bss_wpa_list) {
-		bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
-		if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0)
-			break;
-		bss = NULL;
-	}
-	if (bss) {
-		len = bss->wpa_ie_len;
-		memcpy(wpa_ie, bss->wpa_ie, len);
-	}
-	mutex_unlock(&priv->wpa_lock);
-
-	return len;
-}
-
-void
-prism54_wpa_bss_ie_init(islpci_private *priv)
-{
-	INIT_LIST_HEAD(&priv->bss_wpa_list);
-	mutex_init(&priv->wpa_lock);
-}
-
-void
-prism54_wpa_bss_ie_clean(islpci_private *priv)
-{
-	struct islpci_bss_wpa_ie *bss, *n;
-
-	list_for_each_entry_safe(bss, n, &priv->bss_wpa_list, list) {
-		kfree(bss);
-	}
-}
-
-static void
-prism54_process_bss_data(islpci_private *priv, u32 oid, u8 *addr,
-			 u8 *payload, size_t len)
-{
-	struct ieee80211_beacon_phdr *hdr;
-	u8 *pos, *end;
-
-	if (!priv->wpa)
-		return;
-
-	hdr = (struct ieee80211_beacon_phdr *) payload;
-	pos = (u8 *) (hdr + 1);
-	end = payload + len;
-	while (pos < end) {
-		if (pos + 2 + pos[1] > end) {
-			printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed "
-			       "for %pM\n", addr);
-			return;
-		}
-		if (pos[0] == WLAN_EID_GENERIC && pos[1] >= 4 &&
-		    memcmp(pos + 2, wpa_oid, 4) == 0) {
-			prism54_wpa_bss_ie_add(priv, addr, pos, pos[1] + 2);
-			return;
-		}
-		pos += 2 + pos[1];
-	}
-}
-
-static void
-handle_request(islpci_private *priv, struct obj_mlme *mlme, enum oid_num_t oid)
-{
-	if (((mlme->state == DOT11_STATE_AUTHING) ||
-	     (mlme->state == DOT11_STATE_ASSOCING))
-	    && mgt_mlme_answer(priv)) {
-		/* Someone is requesting auth and we must respond. Just send back
-		 * the trap with error code set accordingly.
-		 */
-		mlme->code = prism54_mac_accept(&priv->acl,
-						mlme->address) ? 0 : 1;
-		mgt_set_request(priv, oid, 0, mlme);
-	}
-}
-
-static int
-prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
-			    char *data)
-{
-	struct obj_mlme *mlme = (struct obj_mlme *) data;
-	struct obj_mlmeex *mlmeex = (struct obj_mlmeex *) data;
-	struct obj_mlmeex *confirm;
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	int wpa_ie_len;
-	size_t len = 0; /* u16, better? */
-	u8 *payload = NULL, *pos = NULL;
-	int ret;
-
-	/* I think all trapable objects are listed here.
-	 * Some oids have a EX version. The difference is that they are emitted
-	 * in DOT11_MLME_EXTENDED mode (set with DOT11_OID_MLMEAUTOLEVEL)
-	 * with more info.
-	 * The few events already defined by the wireless tools are not really
-	 * suited. We use the more flexible custom event facility.
-	 */
-
-	if (oid >= DOT11_OID_BEACON) {
-		len = mlmeex->size;
-		payload = pos = mlmeex->data;
-	}
-
-	/* I fear prism54_process_bss_data won't work with big endian data */
-	if ((oid == DOT11_OID_BEACON) || (oid == DOT11_OID_PROBE))
-		prism54_process_bss_data(priv, oid, mlmeex->address,
-					 payload, len);
-
-	mgt_le_to_cpu(isl_oid[oid].flags & OID_FLAG_TYPE, (void *) mlme);
-
-	switch (oid) {
-
-	case GEN_OID_LINKSTATE:
-		link_changed(priv->ndev, (u32) *data);
-		break;
-
-	case DOT11_OID_MICFAILURE:
-		send_simple_event(priv, "Mic failure");
-		break;
-
-	case DOT11_OID_DEAUTHENTICATE:
-		send_formatted_event(priv, "DeAuthenticate request", mlme, 0);
-		break;
-
-	case DOT11_OID_AUTHENTICATE:
-		handle_request(priv, mlme, oid);
-		send_formatted_event(priv, "Authenticate request", mlme, 1);
-		break;
-
-	case DOT11_OID_DISASSOCIATE:
-		send_formatted_event(priv, "Disassociate request", mlme, 0);
-		break;
-
-	case DOT11_OID_ASSOCIATE:
-		handle_request(priv, mlme, oid);
-		send_formatted_event(priv, "Associate request", mlme, 1);
-		break;
-
-	case DOT11_OID_REASSOCIATE:
-		handle_request(priv, mlme, oid);
-		send_formatted_event(priv, "ReAssociate request", mlme, 1);
-		break;
-
-	case DOT11_OID_BEACON:
-		send_formatted_event(priv,
-				     "Received a beacon from an unknown AP",
-				     mlme, 0);
-		break;
-
-	case DOT11_OID_PROBE:
-		/* we received a probe from a client. */
-		send_formatted_event(priv, "Received a probe from client", mlme,
-				     0);
-		break;
-
-		/* Note : "mlme" is actually a "struct obj_mlmeex *" here, but this
-		 * is backward compatible layout-wise with "struct obj_mlme".
-		 */
-
-	case DOT11_OID_DEAUTHENTICATEEX:
-		send_formatted_event(priv, "DeAuthenticate request", mlme, 0);
-		break;
-
-	case DOT11_OID_AUTHENTICATEEX:
-		handle_request(priv, mlme, oid);
-		send_formatted_event(priv, "Authenticate request (ex)", mlme, 1);
-
-		if (priv->iw_mode != IW_MODE_MASTER
-				&& mlmeex->state != DOT11_STATE_AUTHING)
-			break;
-
-		confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC);
-
-		if (!confirm)
-			break;
-
-		memcpy(&confirm->address, mlmeex->address, ETH_ALEN);
-		printk(KERN_DEBUG "Authenticate from: address:\t%pM\n",
-		       mlmeex->address);
-		confirm->id = -1; /* or mlmeex->id ? */
-		confirm->state = 0; /* not used */
-		confirm->code = 0;
-		confirm->size = 6;
-		confirm->data[0] = 0x00;
-		confirm->data[1] = 0x00;
-		confirm->data[2] = 0x02;
-		confirm->data[3] = 0x00;
-		confirm->data[4] = 0x00;
-		confirm->data[5] = 0x00;
-
-		ret = mgt_set_varlen(priv, DOT11_OID_ASSOCIATEEX, confirm, 6);
-
-		kfree(confirm);
-		if (ret)
-			return ret;
-		break;
-
-	case DOT11_OID_DISASSOCIATEEX:
-		send_formatted_event(priv, "Disassociate request (ex)", mlme, 0);
-		break;
-
-	case DOT11_OID_ASSOCIATEEX:
-		handle_request(priv, mlme, oid);
-		send_formatted_event(priv, "Associate request (ex)", mlme, 1);
-
-		if (priv->iw_mode != IW_MODE_MASTER
-				&& mlmeex->state != DOT11_STATE_ASSOCING)
-			break;
-
-		confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC);
-
-		if (!confirm)
-			break;
-
-		memcpy(&confirm->address, mlmeex->address, ETH_ALEN);
-
-		confirm->id = ((struct obj_mlmeex *)mlme)->id;
-		confirm->state = 0; /* not used */
-		confirm->code = 0;
-
-		wpa_ie_len = prism54_wpa_bss_ie_get(priv, mlmeex->address, wpa_ie);
-
-		if (!wpa_ie_len) {
-			printk(KERN_DEBUG "No WPA IE found from address:\t%pM\n",
-			       mlmeex->address);
-			kfree(confirm);
-			break;
-		}
-
-		confirm->size = wpa_ie_len;
-		memcpy(&confirm->data, wpa_ie, wpa_ie_len);
-
-		mgt_set_varlen(priv, oid, confirm, wpa_ie_len);
-
-		kfree(confirm);
-
-		break;
-
-	case DOT11_OID_REASSOCIATEEX:
-		handle_request(priv, mlme, oid);
-		send_formatted_event(priv, "Reassociate request (ex)", mlme, 1);
-
-		if (priv->iw_mode != IW_MODE_MASTER
-				&& mlmeex->state != DOT11_STATE_ASSOCING)
-			break;
-
-		confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC);
-
-		if (!confirm)
-			break;
-
-		memcpy(&confirm->address, mlmeex->address, ETH_ALEN);
-
-		confirm->id = mlmeex->id;
-		confirm->state = 0; /* not used */
-		confirm->code = 0;
-
-		wpa_ie_len = prism54_wpa_bss_ie_get(priv, mlmeex->address, wpa_ie);
-
-		if (!wpa_ie_len) {
-			printk(KERN_DEBUG "No WPA IE found from address:\t%pM\n",
-			       mlmeex->address);
-			kfree(confirm);
-			break;
-		}
-
-		confirm->size = wpa_ie_len;
-		memcpy(&confirm->data, wpa_ie, wpa_ie_len);
-
-		mgt_set_varlen(priv, oid, confirm, wpa_ie_len);
-
-		kfree(confirm);
-
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * Process a device trap.  This is called via schedule_work(), outside of
- * interrupt context, no locks held.
- */
-void
-prism54_process_trap(struct work_struct *work)
-{
-	struct islpci_mgmtframe *frame =
-		container_of(work, struct islpci_mgmtframe, ws);
-	struct net_device *ndev = frame->ndev;
-	enum oid_num_t n = mgt_oidtonum(frame->header->oid);
-
-	if (n != OID_NUM_LAST)
-		prism54_process_trap_helper(netdev_priv(ndev), n, frame->data);
-	islpci_mgt_release(frame);
-}
-
-int
-prism54_set_mac_address(struct net_device *ndev, void *addr)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	int ret;
-
-	if (ndev->addr_len != 6)
-		return -EINVAL;
-	ret = mgt_set_request(priv, GEN_OID_MACADDRESS, 0,
-			      &((struct sockaddr *) addr)->sa_data);
-	if (!ret)
-		memcpy(priv->ndev->dev_addr,
-		       &((struct sockaddr *) addr)->sa_data, ETH_ALEN);
-
-	return ret;
-}
-
-#define PRISM54_SET_WPA			SIOCIWFIRSTPRIV+12
-
-static int
-prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info,
-		__u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	u32 mlme, authen, dot1x, filter, wep;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	wep = 1; /* For privacy invoked */
-	filter = 1; /* Filter out all unencrypted frames */
-	dot1x = 0x01; /* To enable eap filter */
-	mlme = DOT11_MLME_EXTENDED;
-	authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */
-
-	down_write(&priv->mib_sem);
-	priv->wpa = *uwrq;
-
-	switch (priv->wpa) {
-		default:
-		case 0: /* Clears/disables WPA and friends */
-			wep = 0;
-			filter = 0; /* Do not filter un-encrypted data */
-			dot1x = 0;
-			mlme = DOT11_MLME_AUTO;
-			printk("%s: Disabling WPA\n", ndev->name);
-			break;
-		case 2:
-		case 1: /* WPA */
-			printk("%s: Enabling WPA\n", ndev->name);
-			break;
-	}
-	up_write(&priv->mib_sem);
-
-	mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
-	mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &wep);
-	mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &filter);
-	mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x);
-	mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlme);
-
-	return 0;
-}
-
-static int
-prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info,
-		__u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	*uwrq = priv->wpa;
-	return 0;
-}
-
-static int
-prism54_set_prismhdr(struct net_device *ndev, struct iw_request_info *info,
-		     __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	priv->monitor_type =
-	    (*uwrq ? ARPHRD_IEEE80211_PRISM : ARPHRD_IEEE80211);
-	if (priv->iw_mode == IW_MODE_MONITOR)
-		priv->ndev->type = priv->monitor_type;
-
-	return 0;
-}
-
-static int
-prism54_get_prismhdr(struct net_device *ndev, struct iw_request_info *info,
-		     __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	*uwrq = (priv->monitor_type == ARPHRD_IEEE80211_PRISM);
-	return 0;
-}
-
-static int
-prism54_debug_oid(struct net_device *ndev, struct iw_request_info *info,
-		  __u32 * uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	priv->priv_oid = *uwrq;
-	printk("%s: oid 0x%08X\n", ndev->name, *uwrq);
-
-	return 0;
-}
-
-static int
-prism54_debug_get_oid(struct net_device *ndev, struct iw_request_info *info,
-		      struct iw_point *data, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_mgmtframe *response;
-	int ret = -EIO;
-
-	printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid);
-	data->length = 0;
-
-	if (islpci_get_state(priv) >= PRV_STATE_INIT) {
-		ret =
-		    islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
-					   priv->priv_oid, extra, 256,
-					   &response);
-		printk("%s: ret: %i\n", ndev->name, ret);
-		if (ret || !response
-		    || response->header->operation == PIMFOR_OP_ERROR) {
-			if (response) {
-				islpci_mgt_release(response);
-			}
-			printk("%s: EIO\n", ndev->name);
-			ret = -EIO;
-		}
-		if (!ret) {
-			data->length = response->header->length;
-			memcpy(extra, response->data, data->length);
-			islpci_mgt_release(response);
-			printk("%s: len: %i\n", ndev->name, data->length);
-		}
-	}
-
-	return ret;
-}
-
-static int
-prism54_debug_set_oid(struct net_device *ndev, struct iw_request_info *info,
-		      struct iw_point *data, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	struct islpci_mgmtframe *response;
-	int ret = 0, response_op = PIMFOR_OP_ERROR;
-
-	printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid,
-	       data->length);
-
-	if (islpci_get_state(priv) >= PRV_STATE_INIT) {
-		ret =
-		    islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET,
-					   priv->priv_oid, extra, data->length,
-					   &response);
-		printk("%s: ret: %i\n", ndev->name, ret);
-		if (ret || !response
-		    || response->header->operation == PIMFOR_OP_ERROR) {
-			if (response) {
-				islpci_mgt_release(response);
-			}
-			printk("%s: EIO\n", ndev->name);
-			ret = -EIO;
-		}
-		if (!ret) {
-			response_op = response->header->operation;
-			printk("%s: response_op: %i\n", ndev->name,
-			       response_op);
-			islpci_mgt_release(response);
-		}
-	}
-
-	return (ret ? ret : -EINPROGRESS);
-}
-
-static int
-prism54_set_spy(struct net_device *ndev,
-		struct iw_request_info *info,
-		union iwreq_data *uwrq, char *extra)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	u32 u;
-	enum oid_num_t oid = OID_INL_CONFIG;
-
-	down_write(&priv->mib_sem);
-	mgt_get(priv, OID_INL_CONFIG, &u);
-
-	if ((uwrq->data.length == 0) && (priv->spy_data.spy_number > 0))
-		/* disable spy */
-		u &= ~INL_CONFIG_RXANNEX;
-	else if ((uwrq->data.length > 0) && (priv->spy_data.spy_number == 0))
-		/* enable spy */
-		u |= INL_CONFIG_RXANNEX;
-
-	mgt_set(priv, OID_INL_CONFIG, &u);
-	mgt_commit_list(priv, &oid, 1);
-	up_write(&priv->mib_sem);
-
-	return iw_handler_set_spy(ndev, info, uwrq, extra);
-}
-
-static const iw_handler prism54_handler[] = {
-	(iw_handler) prism54_commit,	/* SIOCSIWCOMMIT */
-	(iw_handler) prism54_get_name,	/* SIOCGIWNAME */
-	(iw_handler) NULL,	/* SIOCSIWNWID */
-	(iw_handler) NULL,	/* SIOCGIWNWID */
-	(iw_handler) prism54_set_freq,	/* SIOCSIWFREQ */
-	(iw_handler) prism54_get_freq,	/* SIOCGIWFREQ */
-	(iw_handler) prism54_set_mode,	/* SIOCSIWMODE */
-	(iw_handler) prism54_get_mode,	/* SIOCGIWMODE */
-	(iw_handler) prism54_set_sens,	/* SIOCSIWSENS */
-	(iw_handler) prism54_get_sens,	/* SIOCGIWSENS */
-	(iw_handler) NULL,	/* SIOCSIWRANGE */
-	(iw_handler) prism54_get_range,	/* SIOCGIWRANGE */
-	(iw_handler) NULL,	/* SIOCSIWPRIV */
-	(iw_handler) NULL,	/* SIOCGIWPRIV */
-	(iw_handler) NULL,	/* SIOCSIWSTATS */
-	(iw_handler) NULL,	/* SIOCGIWSTATS */
-	prism54_set_spy,	/* SIOCSIWSPY */
-	iw_handler_get_spy,	/* SIOCGIWSPY */
-	iw_handler_set_thrspy,	/* SIOCSIWTHRSPY */
-	iw_handler_get_thrspy,	/* SIOCGIWTHRSPY */
-	(iw_handler) prism54_set_wap,	/* SIOCSIWAP */
-	(iw_handler) prism54_get_wap,	/* SIOCGIWAP */
-	(iw_handler) NULL,	/* -- hole -- */
-	(iw_handler) NULL,	/* SIOCGIWAPLIST deprecated */
-	(iw_handler) prism54_set_scan,	/* SIOCSIWSCAN */
-	(iw_handler) prism54_get_scan,	/* SIOCGIWSCAN */
-	(iw_handler) prism54_set_essid,	/* SIOCSIWESSID */
-	(iw_handler) prism54_get_essid,	/* SIOCGIWESSID */
-	(iw_handler) prism54_set_nick,	/* SIOCSIWNICKN */
-	(iw_handler) prism54_get_nick,	/* SIOCGIWNICKN */
-	(iw_handler) NULL,	/* -- hole -- */
-	(iw_handler) NULL,	/* -- hole -- */
-	(iw_handler) prism54_set_rate,	/* SIOCSIWRATE */
-	(iw_handler) prism54_get_rate,	/* SIOCGIWRATE */
-	(iw_handler) prism54_set_rts,	/* SIOCSIWRTS */
-	(iw_handler) prism54_get_rts,	/* SIOCGIWRTS */
-	(iw_handler) prism54_set_frag,	/* SIOCSIWFRAG */
-	(iw_handler) prism54_get_frag,	/* SIOCGIWFRAG */
-	(iw_handler) prism54_set_txpower,	/* SIOCSIWTXPOW */
-	(iw_handler) prism54_get_txpower,	/* SIOCGIWTXPOW */
-	(iw_handler) prism54_set_retry,	/* SIOCSIWRETRY */
-	(iw_handler) prism54_get_retry,	/* SIOCGIWRETRY */
-	(iw_handler) prism54_set_encode,	/* SIOCSIWENCODE */
-	(iw_handler) prism54_get_encode,	/* SIOCGIWENCODE */
-	(iw_handler) NULL,	/* SIOCSIWPOWER */
-	(iw_handler) NULL,	/* SIOCGIWPOWER */
-	NULL,			/* -- hole -- */
-	NULL,			/* -- hole -- */
-	(iw_handler) prism54_set_genie,	/* SIOCSIWGENIE */
-	(iw_handler) prism54_get_genie,	/* SIOCGIWGENIE */
-	(iw_handler) prism54_set_auth,	/* SIOCSIWAUTH */
-	(iw_handler) prism54_get_auth,	/* SIOCGIWAUTH */
-	(iw_handler) prism54_set_encodeext, /* SIOCSIWENCODEEXT */
-	(iw_handler) prism54_get_encodeext, /* SIOCGIWENCODEEXT */
-	NULL,			/* SIOCSIWPMKSA */
-};
-
-/* The low order bit identify a SET (0) or a GET (1) ioctl.  */
-
-#define PRISM54_RESET		SIOCIWFIRSTPRIV
-#define PRISM54_GET_POLICY	SIOCIWFIRSTPRIV+1
-#define PRISM54_SET_POLICY	SIOCIWFIRSTPRIV+2
-#define PRISM54_GET_MAC		SIOCIWFIRSTPRIV+3
-#define PRISM54_ADD_MAC		SIOCIWFIRSTPRIV+4
-
-#define PRISM54_DEL_MAC		SIOCIWFIRSTPRIV+6
-
-#define PRISM54_KICK_MAC	SIOCIWFIRSTPRIV+8
-
-#define PRISM54_KICK_ALL	SIOCIWFIRSTPRIV+10
-
-#define PRISM54_GET_WPA		SIOCIWFIRSTPRIV+11
-#define PRISM54_SET_WPA		SIOCIWFIRSTPRIV+12
-
-#define PRISM54_DBG_OID		SIOCIWFIRSTPRIV+14
-#define PRISM54_DBG_GET_OID	SIOCIWFIRSTPRIV+15
-#define PRISM54_DBG_SET_OID	SIOCIWFIRSTPRIV+16
-
-#define PRISM54_GET_OID		SIOCIWFIRSTPRIV+17
-#define PRISM54_SET_OID_U32	SIOCIWFIRSTPRIV+18
-#define	PRISM54_SET_OID_STR	SIOCIWFIRSTPRIV+20
-#define	PRISM54_SET_OID_ADDR	SIOCIWFIRSTPRIV+22
-
-#define PRISM54_GET_PRISMHDR	SIOCIWFIRSTPRIV+23
-#define PRISM54_SET_PRISMHDR	SIOCIWFIRSTPRIV+24
-
-#define IWPRIV_SET_U32(n,x)	{ n, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x }
-#define IWPRIV_SET_SSID(n,x)	{ n, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x }
-#define IWPRIV_SET_ADDR(n,x)	{ n, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x }
-#define IWPRIV_GET(n,x)	{ n, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, "g_"x }
-
-#define IWPRIV_U32(n,x)		IWPRIV_SET_U32(n,x), IWPRIV_GET(n,x)
-#define IWPRIV_SSID(n,x)	IWPRIV_SET_SSID(n,x), IWPRIV_GET(n,x)
-#define IWPRIV_ADDR(n,x)	IWPRIV_SET_ADDR(n,x), IWPRIV_GET(n,x)
-
-/* Note : limited to 128 private ioctls (wireless tools 26) */
-
-static const struct iw_priv_args prism54_private_args[] = {
-/*{ cmd, set_args, get_args, name } */
-	{PRISM54_RESET, 0, 0, "reset"},
-	{PRISM54_GET_PRISMHDR, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	 "get_prismhdr"},
-	{PRISM54_SET_PRISMHDR, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "set_prismhdr"},
-	{PRISM54_GET_POLICY, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	 "getPolicy"},
-	{PRISM54_SET_POLICY, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "setPolicy"},
-	{PRISM54_GET_MAC, 0, IW_PRIV_TYPE_ADDR | 64, "getMac"},
-	{PRISM54_ADD_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "addMac"},
-	{PRISM54_DEL_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "delMac"},
-	{PRISM54_KICK_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "kickMac"},
-	{PRISM54_KICK_ALL, 0, 0, "kickAll"},
-	{PRISM54_GET_WPA, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-	 "get_wpa"},
-	{PRISM54_SET_WPA, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "set_wpa"},
-	{PRISM54_DBG_OID, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
-	 "dbg_oid"},
-	{PRISM54_DBG_GET_OID, 0, IW_PRIV_TYPE_BYTE | 256, "dbg_get_oid"},
-	{PRISM54_DBG_SET_OID, IW_PRIV_TYPE_BYTE | 256, 0, "dbg_set_oid"},
-	/* --- sub-ioctls handlers --- */
-	{PRISM54_GET_OID,
-	 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, ""},
-	{PRISM54_SET_OID_U32,
-	 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, ""},
-	{PRISM54_SET_OID_STR,
-	 IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, ""},
-	{PRISM54_SET_OID_ADDR,
-	 IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, ""},
-	/* --- sub-ioctls definitions --- */
-	IWPRIV_ADDR(GEN_OID_MACADDRESS, "addr"),
-	IWPRIV_GET(GEN_OID_LINKSTATE, "linkstate"),
-	IWPRIV_U32(DOT11_OID_BSSTYPE, "bsstype"),
-	IWPRIV_ADDR(DOT11_OID_BSSID, "bssid"),
-	IWPRIV_U32(DOT11_OID_STATE, "state"),
-	IWPRIV_U32(DOT11_OID_AID, "aid"),
-
-	IWPRIV_SSID(DOT11_OID_SSIDOVERRIDE, "ssidoverride"),
-
-	IWPRIV_U32(DOT11_OID_MEDIUMLIMIT, "medlimit"),
-	IWPRIV_U32(DOT11_OID_BEACONPERIOD, "beacon"),
-	IWPRIV_U32(DOT11_OID_DTIMPERIOD, "dtimperiod"),
-
-	IWPRIV_U32(DOT11_OID_AUTHENABLE, "authenable"),
-	IWPRIV_U32(DOT11_OID_PRIVACYINVOKED, "privinvok"),
-	IWPRIV_U32(DOT11_OID_EXUNENCRYPTED, "exunencrypt"),
-
-	IWPRIV_U32(DOT11_OID_REKEYTHRESHOLD, "rekeythresh"),
-
-	IWPRIV_U32(DOT11_OID_MAXTXLIFETIME, "maxtxlife"),
-	IWPRIV_U32(DOT11_OID_MAXRXLIFETIME, "maxrxlife"),
-	IWPRIV_U32(DOT11_OID_ALOFT_FIXEDRATE, "fixedrate"),
-	IWPRIV_U32(DOT11_OID_MAXFRAMEBURST, "frameburst"),
-	IWPRIV_U32(DOT11_OID_PSM, "psm"),
-
-	IWPRIV_U32(DOT11_OID_BRIDGELOCAL, "bridge"),
-	IWPRIV_U32(DOT11_OID_CLIENTS, "clients"),
-	IWPRIV_U32(DOT11_OID_CLIENTSASSOCIATED, "clientassoc"),
-	IWPRIV_U32(DOT11_OID_DOT1XENABLE, "dot1xenable"),
-	IWPRIV_U32(DOT11_OID_ANTENNARX, "rxant"),
-	IWPRIV_U32(DOT11_OID_ANTENNATX, "txant"),
-	IWPRIV_U32(DOT11_OID_ANTENNADIVERSITY, "antdivers"),
-	IWPRIV_U32(DOT11_OID_EDTHRESHOLD, "edthresh"),
-	IWPRIV_U32(DOT11_OID_PREAMBLESETTINGS, "preamble"),
-	IWPRIV_GET(DOT11_OID_RATES, "rates"),
-	IWPRIV_U32(DOT11_OID_OUTPUTPOWER, ".11outpower"),
-	IWPRIV_GET(DOT11_OID_SUPPORTEDRATES, "supprates"),
-	IWPRIV_GET(DOT11_OID_SUPPORTEDFREQUENCIES, "suppfreq"),
-
-	IWPRIV_U32(DOT11_OID_NOISEFLOOR, "noisefloor"),
-	IWPRIV_GET(DOT11_OID_FREQUENCYACTIVITY, "freqactivity"),
-	IWPRIV_U32(DOT11_OID_NONERPPROTECTION, "nonerpprotec"),
-	IWPRIV_U32(DOT11_OID_PROFILES, "profile"),
-	IWPRIV_GET(DOT11_OID_EXTENDEDRATES, "extrates"),
-	IWPRIV_U32(DOT11_OID_MLMEAUTOLEVEL, "mlmelevel"),
-
-	IWPRIV_GET(DOT11_OID_BSSS, "bsss"),
-	IWPRIV_GET(DOT11_OID_BSSLIST, "bsslist"),
-	IWPRIV_U32(OID_INL_MODE, "mode"),
-	IWPRIV_U32(OID_INL_CONFIG, "config"),
-	IWPRIV_U32(OID_INL_DOT11D_CONFORMANCE, ".11dconform"),
-	IWPRIV_GET(OID_INL_PHYCAPABILITIES, "phycapa"),
-	IWPRIV_U32(OID_INL_OUTPUTPOWER, "outpower"),
-};
-
-static const iw_handler prism54_private_handler[] = {
-	(iw_handler) prism54_reset,
-	(iw_handler) prism54_get_policy,
-	(iw_handler) prism54_set_policy,
-	(iw_handler) prism54_get_mac,
-	(iw_handler) prism54_add_mac,
-	(iw_handler) NULL,
-	(iw_handler) prism54_del_mac,
-	(iw_handler) NULL,
-	(iw_handler) prism54_kick_mac,
-	(iw_handler) NULL,
-	(iw_handler) prism54_kick_all,
-	(iw_handler) prism54_get_wpa,
-	(iw_handler) prism54_set_wpa,
-	(iw_handler) NULL,
-	(iw_handler) prism54_debug_oid,
-	(iw_handler) prism54_debug_get_oid,
-	(iw_handler) prism54_debug_set_oid,
-	(iw_handler) prism54_get_oid,
-	(iw_handler) prism54_set_u32,
-	(iw_handler) NULL,
-	(iw_handler) prism54_set_raw,
-	(iw_handler) NULL,
-	(iw_handler) prism54_set_raw,
-	(iw_handler) prism54_get_prismhdr,
-	(iw_handler) prism54_set_prismhdr,
-};
-
-const struct iw_handler_def prism54_handler_def = {
-	.num_standard = ARRAY_SIZE(prism54_handler),
-	.num_private = ARRAY_SIZE(prism54_private_handler),
-	.num_private_args = ARRAY_SIZE(prism54_private_args),
-	.standard = (iw_handler *) prism54_handler,
-	.private = (iw_handler *) prism54_private_handler,
-	.private_args = (struct iw_priv_args *) prism54_private_args,
-	.get_wireless_stats = prism54_get_wireless_stats,
-};
diff --git a/drivers/net/wireless/intersil/prism54/isl_ioctl.h b/drivers/net/wireless/intersil/prism54/isl_ioctl.h
deleted file mode 100644
index 3f85fd75ac19..000000000000
--- a/drivers/net/wireless/intersil/prism54/isl_ioctl.h
+++ /dev/null
@@ -1,35 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *            (C) 2003 Aurelien Alleaume <slts@free.fr>
- *            (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
- */
-
-#ifndef _ISL_IOCTL_H
-#define _ISL_IOCTL_H
-
-#include "islpci_mgt.h"
-#include "islpci_dev.h"
-
-#include <net/iw_handler.h>	/* New driver API */
-
-#define SUPPORTED_WIRELESS_EXT                  19
-
-void prism54_mib_init(islpci_private *);
-
-struct iw_statistics *prism54_get_wireless_stats(struct net_device *);
-void prism54_update_stats(struct work_struct *);
-
-void prism54_acl_init(struct islpci_acl *);
-void prism54_acl_clean(struct islpci_acl *);
-
-void prism54_process_trap(struct work_struct *);
-
-void prism54_wpa_bss_ie_init(islpci_private *priv);
-void prism54_wpa_bss_ie_clean(islpci_private *priv);
-
-int prism54_set_mac_address(struct net_device *, void *);
-
-extern const struct iw_handler_def prism54_handler_def;
-
-#endif				/* _ISL_IOCTL_H */
diff --git a/drivers/net/wireless/intersil/prism54/isl_oid.h b/drivers/net/wireless/intersil/prism54/isl_oid.h
deleted file mode 100644
index b889bb73a485..000000000000
--- a/drivers/net/wireless/intersil/prism54/isl_oid.h
+++ /dev/null
@@ -1,492 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
- *  Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
- *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
- */
-
-#if !defined(_ISL_OID_H)
-#define _ISL_OID_H
-
-/*
- * MIB related constant and structure definitions for communicating
- * with the device firmware
- */
-
-struct obj_ssid {
-	u8 length;
-	char octets[33];
-} __packed;
-
-struct obj_key {
-	u8 type;		/* dot11_priv_t */
-	u8 length;
-	char key[32];
-} __packed;
-
-struct obj_mlme {
-	u8 address[6];
-	u16 id;
-	u16 state;
-	u16 code;
-} __packed;
-
-struct obj_mlmeex {
-	u8 address[6];
-	u16 id;
-	u16 state;
-	u16 code;
-	u16 size;
-	u8 data[];
-} __packed;
-
-struct obj_buffer {
-	u32 size;
-	u32 addr;		/* 32bit bus address */
-} __packed;
-
-struct obj_bss {
-	u8 address[6];
-	int:16;			/* padding */
-
-	char state;
-	char reserved;
-	short age;
-
-	char quality;
-	char rssi;
-
-	struct obj_ssid ssid;
-	short channel;
-	char beacon_period;
-	char dtim_period;
-	short capinfo;
-	short rates;
-	short basic_rates;
-	int:16;			/* padding */
-} __packed;
-
-struct obj_bsslist {
-	u32 nr;
-	struct obj_bss bsslist[];
-} __packed;
-
-struct obj_frequencies {
-	u16 nr;
-	u16 mhz[];
-} __packed;
-
-struct obj_attachment {
-	char type;
-	char reserved;
-	short id;
-	short size;
-	char data[];
-} __packed;
-
-/*
- * in case everything's ok, the inlined function below will be
- * optimized away by the compiler...
- */
-static inline void
-__bug_on_wrong_struct_sizes(void)
-{
-	BUILD_BUG_ON(sizeof (struct obj_ssid) != 34);
-	BUILD_BUG_ON(sizeof (struct obj_key) != 34);
-	BUILD_BUG_ON(sizeof (struct obj_mlme) != 12);
-	BUILD_BUG_ON(sizeof (struct obj_mlmeex) != 14);
-	BUILD_BUG_ON(sizeof (struct obj_buffer) != 8);
-	BUILD_BUG_ON(sizeof (struct obj_bss) != 60);
-	BUILD_BUG_ON(sizeof (struct obj_bsslist) != 4);
-	BUILD_BUG_ON(sizeof (struct obj_frequencies) != 2);
-}
-
-enum dot11_state_t {
-	DOT11_STATE_NONE = 0,
-	DOT11_STATE_AUTHING = 1,
-	DOT11_STATE_AUTH = 2,
-	DOT11_STATE_ASSOCING = 3,
-
-	DOT11_STATE_ASSOC = 5,
-	DOT11_STATE_IBSS = 6,
-	DOT11_STATE_WDS = 7
-};
-
-enum dot11_bsstype_t {
-	DOT11_BSSTYPE_NONE = 0,
-	DOT11_BSSTYPE_INFRA = 1,
-	DOT11_BSSTYPE_IBSS = 2,
-	DOT11_BSSTYPE_ANY = 3
-};
-
-enum dot11_auth_t {
-	DOT11_AUTH_NONE = 0,
-	DOT11_AUTH_OS = 1,
-	DOT11_AUTH_SK = 2,
-	DOT11_AUTH_BOTH = 3
-};
-
-enum dot11_mlme_t {
-	DOT11_MLME_AUTO = 0,
-	DOT11_MLME_INTERMEDIATE = 1,
-	DOT11_MLME_EXTENDED = 2
-};
-
-enum dot11_priv_t {
-	DOT11_PRIV_WEP = 0,
-	DOT11_PRIV_TKIP = 1
-};
-
-/* Prism "Nitro" / Frameburst / "Packet Frame Grouping"
- * Value is in microseconds. Represents the # microseconds
- * the firmware will take to group frames before sending out then out
- * together with a CSMA contention. Without this all frames are
- * sent with a CSMA contention.
- * Bibliography:
- * https://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
- */
-enum dot11_maxframeburst_t {
-	/* Values for DOT11_OID_MAXFRAMEBURST */
-	DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */
-	DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */
-	DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */
-	DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max,
-		* Note: firmware allows for greater values. This is a
-		* recommended max. I'll update this as I find
-		* out what the real MAX is. Also note that you don't necessarily
-		* get better results with a greater value here.
-		*/
-};
-
-/* Support for 802.11 long and short frame preambles.
- * Long	 preamble uses 128-bit sync field, 8-bit  CRC
- * Short preamble uses 56-bit  sync field, 16-bit CRC
- *
- * 802.11a -- not sure, both optionally ?
- * 802.11b supports long and optionally short
- * 802.11g supports both */
-enum dot11_preamblesettings_t {
-	DOT11_PREAMBLESETTING_LONG = 0,
-		/* Allows *only* long 802.11 preambles */
-	DOT11_PREAMBLESETTING_SHORT = 1,
-		/* Allows *only* short 802.11 preambles */
-	DOT11_PREAMBLESETTING_DYNAMIC = 2
-		/* AutomatiGically set */
-};
-
-/* Support for 802.11 slot timing (time between packets).
- *
- * Long uses 802.11a slot timing  (9 usec ?)
- * Short uses 802.11b slot timing (20 use ?) */
-enum dot11_slotsettings_t {
-	DOT11_SLOTSETTINGS_LONG = 0,
-		/* Allows *only* long 802.11b slot timing */
-	DOT11_SLOTSETTINGS_SHORT = 1,
-		/* Allows *only* long 802.11a slot timing */
-	DOT11_SLOTSETTINGS_DYNAMIC = 2
-		/* AutomatiGically set */
-};
-
-/* All you need to know, ERP is "Extended Rate PHY".
- * An Extended Rate PHY (ERP) STA or AP shall support three different
- * preamble and header formats:
- * Long  preamble (refer to above)
- * Short preamble (refer to above)
- * OFDM  preamble ( ? )
- *
- * I'm assuming here Protection tells the AP
- * to be careful, a STA which cannot handle the long pre-amble
- * has joined.
- */
-enum do11_nonerpstatus_t {
-	DOT11_ERPSTAT_NONEPRESENT = 0,
-	DOT11_ERPSTAT_USEPROTECTION = 1
-};
-
-/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-*
- * The key here is DOT11 NON ERP NEVER protects against
- * NON ERP STA's. You *don't* want this unless
- * you know what you are doing. It means you will only
- * get Extended Rate capabilities */
-enum dot11_nonerpprotection_t {
-	DOT11_NONERP_NEVER = 0,
-	DOT11_NONERP_ALWAYS = 1,
-	DOT11_NONERP_DYNAMIC = 2
-};
-
-/* Preset OID configuration for 802.11 modes
- * Note: DOT11_OID_CW[MIN|MAX] hold the values of the
- * DCS MIN|MAX backoff used */
-enum dot11_profile_t { /* And set/allowed values */
-	/* Allowed values for DOT11_OID_PROFILES */
-	DOT11_PROFILE_B_ONLY = 0,
-		/* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps
-		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
-		 * DOT11_OID_CWMIN: 31
-		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
-		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG
-		 */
-	DOT11_PROFILE_MIXED_G_WIFI = 1,
-		/* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs
-		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
-		 * DOT11_OID_CWMIN: 15
-		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
-		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC
-		 */
-	DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */
-		/* Same as Profile MIXED_G_WIFI */
-	DOT11_PROFILE_G_ONLY = 3,
-		/* Same as Profile MIXED_G_WIFI */
-	DOT11_PROFILE_TEST = 4,
-		/* Same as Profile MIXED_G_WIFI except:
-		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT
-		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER
-		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT
-		 */
-	DOT11_PROFILE_B_WIFI = 5,
-		/* Same as Profile B_ONLY */
-	DOT11_PROFILE_A_ONLY = 6,
-		/* Same as Profile MIXED_G_WIFI except:
-		 * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs
-		 */
-	DOT11_PROFILE_MIXED_SHORT = 7
-		/* Same as MIXED_G_WIFI */
-};
-
-
-/* The dot11d conformance level configures the 802.11d conformance levels.
- * The following conformance levels exist:*/
-enum oid_inl_conformance_t {
-	OID_INL_CONFORMANCE_NONE = 0,	/* Perform active scanning */
-	OID_INL_CONFORMANCE_STRICT = 1,	/* Strictly adhere to 802.11d */
-	OID_INL_CONFORMANCE_FLEXIBLE = 2,	/* Use passed 802.11d info to
-		* determine channel AND/OR just make assumption that active
-		* channels are valid  channels */
-};
-
-enum oid_inl_mode_t {
-	INL_MODE_NONE = -1,
-	INL_MODE_PROMISCUOUS = 0,
-	INL_MODE_CLIENT = 1,
-	INL_MODE_AP = 2,
-	INL_MODE_SNIFFER = 3
-};
-
-enum oid_inl_config_t {
-	INL_CONFIG_NOTHING = 0x00,
-	INL_CONFIG_MANUALRUN = 0x01,
-	INL_CONFIG_FRAMETRAP = 0x02,
-	INL_CONFIG_RXANNEX = 0x04,
-	INL_CONFIG_TXANNEX = 0x08,
-	INL_CONFIG_WDS = 0x10
-};
-
-enum oid_inl_phycap_t {
-	INL_PHYCAP_2400MHZ = 1,
-	INL_PHYCAP_5000MHZ = 2,
-	INL_PHYCAP_FAA = 0x80000000,	/* Means card supports the FAA switch */
-};
-
-
-enum oid_num_t {
-	GEN_OID_MACADDRESS = 0,
-	GEN_OID_LINKSTATE,
-	GEN_OID_WATCHDOG,
-	GEN_OID_MIBOP,
-	GEN_OID_OPTIONS,
-	GEN_OID_LEDCONFIG,
-
-	/* 802.11 */
-	DOT11_OID_BSSTYPE,
-	DOT11_OID_BSSID,
-	DOT11_OID_SSID,
-	DOT11_OID_STATE,
-	DOT11_OID_AID,
-	DOT11_OID_COUNTRYSTRING,
-	DOT11_OID_SSIDOVERRIDE,
-
-	DOT11_OID_MEDIUMLIMIT,
-	DOT11_OID_BEACONPERIOD,
-	DOT11_OID_DTIMPERIOD,
-	DOT11_OID_ATIMWINDOW,
-	DOT11_OID_LISTENINTERVAL,
-	DOT11_OID_CFPPERIOD,
-	DOT11_OID_CFPDURATION,
-
-	DOT11_OID_AUTHENABLE,
-	DOT11_OID_PRIVACYINVOKED,
-	DOT11_OID_EXUNENCRYPTED,
-	DOT11_OID_DEFKEYID,
-	DOT11_OID_DEFKEYX,	/* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
-	DOT11_OID_STAKEY,
-	DOT11_OID_REKEYTHRESHOLD,
-	DOT11_OID_STASC,
-
-	DOT11_OID_PRIVTXREJECTED,
-	DOT11_OID_PRIVRXPLAIN,
-	DOT11_OID_PRIVRXFAILED,
-	DOT11_OID_PRIVRXNOKEY,
-
-	DOT11_OID_RTSTHRESH,
-	DOT11_OID_FRAGTHRESH,
-	DOT11_OID_SHORTRETRIES,
-	DOT11_OID_LONGRETRIES,
-	DOT11_OID_MAXTXLIFETIME,
-	DOT11_OID_MAXRXLIFETIME,
-	DOT11_OID_AUTHRESPTIMEOUT,
-	DOT11_OID_ASSOCRESPTIMEOUT,
-
-	DOT11_OID_ALOFT_TABLE,
-	DOT11_OID_ALOFT_CTRL_TABLE,
-	DOT11_OID_ALOFT_RETREAT,
-	DOT11_OID_ALOFT_PROGRESS,
-	DOT11_OID_ALOFT_FIXEDRATE,
-	DOT11_OID_ALOFT_RSSIGRAPH,
-	DOT11_OID_ALOFT_CONFIG,
-
-	DOT11_OID_VDCFX,
-	DOT11_OID_MAXFRAMEBURST,
-
-	DOT11_OID_PSM,
-	DOT11_OID_CAMTIMEOUT,
-	DOT11_OID_RECEIVEDTIMS,
-	DOT11_OID_ROAMPREFERENCE,
-
-	DOT11_OID_BRIDGELOCAL,
-	DOT11_OID_CLIENTS,
-	DOT11_OID_CLIENTSASSOCIATED,
-	DOT11_OID_CLIENTX,	/* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
-
-	DOT11_OID_CLIENTFIND,
-	DOT11_OID_WDSLINKADD,
-	DOT11_OID_WDSLINKREMOVE,
-	DOT11_OID_EAPAUTHSTA,
-	DOT11_OID_EAPUNAUTHSTA,
-	DOT11_OID_DOT1XENABLE,
-	DOT11_OID_MICFAILURE,
-	DOT11_OID_REKEYINDICATE,
-
-	DOT11_OID_MPDUTXSUCCESSFUL,
-	DOT11_OID_MPDUTXONERETRY,
-	DOT11_OID_MPDUTXMULTIPLERETRIES,
-	DOT11_OID_MPDUTXFAILED,
-	DOT11_OID_MPDURXSUCCESSFUL,
-	DOT11_OID_MPDURXDUPS,
-	DOT11_OID_RTSSUCCESSFUL,
-	DOT11_OID_RTSFAILED,
-	DOT11_OID_ACKFAILED,
-	DOT11_OID_FRAMERECEIVES,
-	DOT11_OID_FRAMEERRORS,
-	DOT11_OID_FRAMEABORTS,
-	DOT11_OID_FRAMEABORTSPHY,
-
-	DOT11_OID_SLOTTIME,
-	DOT11_OID_CWMIN, /* MIN DCS backoff */
-	DOT11_OID_CWMAX, /* MAX DCS backoff */
-	DOT11_OID_ACKWINDOW,
-	DOT11_OID_ANTENNARX,
-	DOT11_OID_ANTENNATX,
-	DOT11_OID_ANTENNADIVERSITY,
-	DOT11_OID_CHANNEL,
-	DOT11_OID_EDTHRESHOLD,
-	DOT11_OID_PREAMBLESETTINGS,
-	DOT11_OID_RATES,
-	DOT11_OID_CCAMODESUPPORTED,
-	DOT11_OID_CCAMODE,
-	DOT11_OID_RSSIVECTOR,
-	DOT11_OID_OUTPUTPOWERTABLE,
-	DOT11_OID_OUTPUTPOWER,
-	DOT11_OID_SUPPORTEDRATES,
-	DOT11_OID_FREQUENCY,
-	DOT11_OID_SUPPORTEDFREQUENCIES,
-	DOT11_OID_NOISEFLOOR,
-	DOT11_OID_FREQUENCYACTIVITY,
-	DOT11_OID_IQCALIBRATIONTABLE,
-	DOT11_OID_NONERPPROTECTION,
-	DOT11_OID_SLOTSETTINGS,
-	DOT11_OID_NONERPTIMEOUT,
-	DOT11_OID_PROFILES,
-	DOT11_OID_EXTENDEDRATES,
-
-	DOT11_OID_DEAUTHENTICATE,
-	DOT11_OID_AUTHENTICATE,
-	DOT11_OID_DISASSOCIATE,
-	DOT11_OID_ASSOCIATE,
-	DOT11_OID_SCAN,
-	DOT11_OID_BEACON,
-	DOT11_OID_PROBE,
-	DOT11_OID_DEAUTHENTICATEEX,
-	DOT11_OID_AUTHENTICATEEX,
-	DOT11_OID_DISASSOCIATEEX,
-	DOT11_OID_ASSOCIATEEX,
-	DOT11_OID_REASSOCIATE,
-	DOT11_OID_REASSOCIATEEX,
-
-	DOT11_OID_NONERPSTATUS,
-
-	DOT11_OID_STATIMEOUT,
-	DOT11_OID_MLMEAUTOLEVEL,
-	DOT11_OID_BSSTIMEOUT,
-	DOT11_OID_ATTACHMENT,
-	DOT11_OID_PSMBUFFER,
-
-	DOT11_OID_BSSS,
-	DOT11_OID_BSSX,		/*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
-	DOT11_OID_BSSFIND,
-	DOT11_OID_BSSLIST,
-
-	OID_INL_TUNNEL,
-	OID_INL_MEMADDR,
-	OID_INL_MEMORY,
-	OID_INL_MODE,
-	OID_INL_COMPONENT_NR,
-	OID_INL_VERSION,
-	OID_INL_INTERFACE_ID,
-	OID_INL_COMPONENT_ID,
-	OID_INL_CONFIG,
-	OID_INL_DOT11D_CONFORMANCE,
-	OID_INL_PHYCAPABILITIES,
-	OID_INL_OUTPUTPOWER,
-
-	OID_NUM_LAST
-};
-
-#define OID_FLAG_CACHED		0x80
-#define OID_FLAG_TYPE		0x7f
-
-#define OID_TYPE_U32		0x01
-#define OID_TYPE_SSID		0x02
-#define OID_TYPE_KEY		0x03
-#define OID_TYPE_BUFFER		0x04
-#define OID_TYPE_BSS		0x05
-#define OID_TYPE_BSSLIST	0x06
-#define OID_TYPE_FREQUENCIES	0x07
-#define OID_TYPE_MLME		0x08
-#define OID_TYPE_MLMEEX		0x09
-#define OID_TYPE_ADDR		0x0A
-#define OID_TYPE_RAW		0x0B
-#define OID_TYPE_ATTACH		0x0C
-
-/* OID_TYPE_MLMEEX is special because of a variable size field when sending.
- * Not yet implemented (not used in driver anyway).
- */
-
-struct oid_t {
-	enum oid_num_t oid;
-	short range;		/* to define a range of oid */
-	short size;		/* max size of the associated data */
-	char flags;
-};
-
-union oid_res_t {
-	void *ptr;
-	u32 u;
-};
-
-#define	IWMAX_BITRATES	20
-#define	IWMAX_BSS	24
-#define IWMAX_FREQ	30
-#define PRIV_STR_SIZE	1024
-
-#endif				/* !defined(_ISL_OID_H) */
-/* EOF */
diff --git a/drivers/net/wireless/intersil/prism54/islpci_dev.c b/drivers/net/wireless/intersil/prism54/islpci_dev.c
deleted file mode 100644
index 8eb6d5e4bd57..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_dev.c
+++ /dev/null
@@ -1,951 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
- *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
- */
-
-#include <linux/hardirq.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/if_arp.h>
-
-#include <asm/io.h>
-
-#include "prismcompat.h"
-#include "isl_38xx.h"
-#include "isl_ioctl.h"
-#include "islpci_dev.h"
-#include "islpci_mgt.h"
-#include "islpci_eth.h"
-#include "oid_mgt.h"
-
-#define ISL3877_IMAGE_FILE	"isl3877"
-#define ISL3886_IMAGE_FILE	"isl3886"
-#define ISL3890_IMAGE_FILE	"isl3890"
-MODULE_FIRMWARE(ISL3877_IMAGE_FILE);
-MODULE_FIRMWARE(ISL3886_IMAGE_FILE);
-MODULE_FIRMWARE(ISL3890_IMAGE_FILE);
-
-static int prism54_bring_down(islpci_private *);
-static int islpci_alloc_memory(islpci_private *);
-
-/* Temporary dummy MAC address to use until firmware is loaded.
- * The idea there is that some tools (such as nameif) may query
- * the MAC address before the netdev is 'open'. By using a valid
- * OUI prefix, they can process the netdev properly.
- * Of course, this is not the final/real MAC address. It doesn't
- * matter, as you are suppose to be able to change it anytime via
- * ndev->set_mac_address. Jean II */
-static const unsigned char	dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
-
-static int
-isl_upload_firmware(islpci_private *priv)
-{
-	u32 reg, rc;
-	void __iomem *device_base = priv->device_base;
-
-	/* clear the RAMBoot and the Reset bit */
-	reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-	reg &= ~ISL38XX_CTRL_STAT_RESET;
-	reg &= ~ISL38XX_CTRL_STAT_RAMBOOT;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* set the Reset bit without reading the register ! */
-	reg |= ISL38XX_CTRL_STAT_RESET;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* clear the Reset bit */
-	reg &= ~ISL38XX_CTRL_STAT_RESET;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	wmb();
-
-	/* wait a while for the device to reboot */
-	mdelay(50);
-
-	{
-		const struct firmware *fw_entry = NULL;
-		long fw_len;
-		const u32 *fw_ptr;
-
-		rc = request_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV);
-		if (rc) {
-			printk(KERN_ERR
-			       "%s: request_firmware() failed for '%s'\n",
-			       "prism54", priv->firmware);
-			return rc;
-		}
-		/* prepare the Direct Memory Base register */
-		reg = ISL38XX_DEV_FIRMWARE_ADDRES;
-
-		fw_ptr = (u32 *) fw_entry->data;
-		fw_len = fw_entry->size;
-
-		if (fw_len % 4) {
-			printk(KERN_ERR
-			       "%s: firmware '%s' size is not multiple of 32bit, aborting!\n",
-			       "prism54", priv->firmware);
-			release_firmware(fw_entry);
-			return -EILSEQ; /* Illegal byte sequence  */;
-		}
-
-		while (fw_len > 0) {
-			long _fw_len =
-			    (fw_len >
-			     ISL38XX_MEMORY_WINDOW_SIZE) ?
-			    ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
-			u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
-
-			/* set the card's base address for writing the data */
-			isl38xx_w32_flush(device_base, reg,
-					  ISL38XX_DIR_MEM_BASE_REG);
-			wmb();	/* be paranoid */
-
-			/* increment the write address for next iteration */
-			reg += _fw_len;
-			fw_len -= _fw_len;
-
-			/* write the data to the Direct Memory Window 32bit-wise */
-			/* memcpy_toio() doesn't guarantee 32bit writes :-| */
-			while (_fw_len > 0) {
-				/* use non-swapping writel() */
-				__raw_writel(*fw_ptr, dev_fw_ptr);
-				fw_ptr++, dev_fw_ptr++;
-				_fw_len -= 4;
-			}
-
-			/* flush PCI posting */
-			(void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH);
-			wmb();	/* be paranoid again */
-
-			BUG_ON(_fw_len != 0);
-		}
-
-		BUG_ON(fw_len != 0);
-
-		/* Firmware version is at offset 40 (also for "newmac") */
-		printk(KERN_DEBUG "%s: firmware version: %.8s\n",
-		       priv->ndev->name, fw_entry->data + 40);
-
-		release_firmware(fw_entry);
-	}
-
-	/* now reset the device
-	 * clear the Reset & ClkRun bit, set the RAMBoot bit */
-	reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-	reg &= ~ISL38XX_CTRL_STAT_CLKRUN;
-	reg &= ~ISL38XX_CTRL_STAT_RESET;
-	reg |= ISL38XX_CTRL_STAT_RAMBOOT;
-	isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG);
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* set the reset bit latches the host override and RAMBoot bits
-	 * into the device for operation when the reset bit is reset */
-	reg |= ISL38XX_CTRL_STAT_RESET;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	/* don't do flush PCI posting here! */
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* clear the reset bit should start the whole circus */
-	reg &= ~ISL38XX_CTRL_STAT_RESET;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	/* don't do flush PCI posting here! */
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	return 0;
-}
-
-/******************************************************************************
-    Device Interrupt Handler
-******************************************************************************/
-
-irqreturn_t
-islpci_interrupt(int irq, void *config)
-{
-	u32 reg;
-	islpci_private *priv = config;
-	struct net_device *ndev = priv->ndev;
-	void __iomem *device = priv->device_base;
-	int powerstate = ISL38XX_PSM_POWERSAVE_STATE;
-
-	/* lock the interrupt handler */
-	spin_lock(&priv->slock);
-
-	/* received an interrupt request on a shared IRQ line
-	 * first check whether the device is in sleep mode */
-	reg = readl(device + ISL38XX_CTRL_STAT_REG);
-	if (reg & ISL38XX_CTRL_STAT_SLEEPMODE)
-		/* device is in sleep mode, IRQ was generated by someone else */
-	{
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
-#endif
-		spin_unlock(&priv->slock);
-		return IRQ_NONE;
-	}
-
-
-	/* check whether there is any source of interrupt on the device */
-	reg = readl(device + ISL38XX_INT_IDENT_REG);
-
-	/* also check the contents of the Interrupt Enable Register, because this
-	 * will filter out interrupt sources from other devices on the same irq ! */
-	reg &= readl(device + ISL38XX_INT_EN_REG);
-	reg &= ISL38XX_INT_SOURCES;
-
-	if (reg != 0) {
-		if (islpci_get_state(priv) != PRV_STATE_SLEEP)
-			powerstate = ISL38XX_PSM_ACTIVE_STATE;
-
-		/* reset the request bits in the Identification register */
-		isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_FUNCTION_CALLS,
-		      "IRQ: Identification register 0x%p 0x%x\n", device, reg);
-#endif
-
-		/* check for each bit in the register separately */
-		if (reg & ISL38XX_INT_IDENT_UPDATE) {
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			/* Queue has been updated */
-			DEBUG(SHOW_TRACING, "IRQ: Update flag\n");
-
-			DEBUG(SHOW_QUEUE_INDEXES,
-			      "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
-			      le32_to_cpu(priv->control_block->
-					  driver_curr_frag[0]),
-			      le32_to_cpu(priv->control_block->
-					  driver_curr_frag[1]),
-			      le32_to_cpu(priv->control_block->
-					  driver_curr_frag[2]),
-			      le32_to_cpu(priv->control_block->
-					  driver_curr_frag[3]),
-			      le32_to_cpu(priv->control_block->
-					  driver_curr_frag[4]),
-			      le32_to_cpu(priv->control_block->
-					  driver_curr_frag[5])
-			    );
-
-			DEBUG(SHOW_QUEUE_INDEXES,
-			      "CB dev Qs: [%i][%i][%i][%i][%i][%i]\n",
-			      le32_to_cpu(priv->control_block->
-					  device_curr_frag[0]),
-			      le32_to_cpu(priv->control_block->
-					  device_curr_frag[1]),
-			      le32_to_cpu(priv->control_block->
-					  device_curr_frag[2]),
-			      le32_to_cpu(priv->control_block->
-					  device_curr_frag[3]),
-			      le32_to_cpu(priv->control_block->
-					  device_curr_frag[4]),
-			      le32_to_cpu(priv->control_block->
-					  device_curr_frag[5])
-			    );
-#endif
-
-			/* cleanup the data low transmit queue */
-			islpci_eth_cleanup_transmit(priv, priv->control_block);
-
-			/* device is in active state, update the
-			 * powerstate flag if necessary */
-			powerstate = ISL38XX_PSM_ACTIVE_STATE;
-
-			/* check all three queues in priority order
-			 * call the PIMFOR receive function until the
-			 * queue is empty */
-			if (isl38xx_in_queue(priv->control_block,
-						ISL38XX_CB_RX_MGMTQ) != 0) {
-#if VERBOSE > SHOW_ERROR_MESSAGES
-				DEBUG(SHOW_TRACING,
-				      "Received frame in Management Queue\n");
-#endif
-				islpci_mgt_receive(ndev);
-
-				islpci_mgt_cleanup_transmit(ndev);
-
-				/* Refill slots in receive queue */
-				islpci_mgmt_rx_fill(ndev);
-
-				/* no need to trigger the device, next
-                                   islpci_mgt_transaction does it */
-			}
-
-			while (isl38xx_in_queue(priv->control_block,
-						ISL38XX_CB_RX_DATA_LQ) != 0) {
-#if VERBOSE > SHOW_ERROR_MESSAGES
-				DEBUG(SHOW_TRACING,
-				      "Received frame in Data Low Queue\n");
-#endif
-				islpci_eth_receive(priv);
-			}
-
-			/* check whether the data transmit queues were full */
-			if (priv->data_low_tx_full) {
-				/* check whether the transmit is not full anymore */
-				if (ISL38XX_CB_TX_QSIZE -
-				    isl38xx_in_queue(priv->control_block,
-						     ISL38XX_CB_TX_DATA_LQ) >=
-				    ISL38XX_MIN_QTHRESHOLD) {
-					/* nope, the driver is ready for more network frames */
-					netif_wake_queue(priv->ndev);
-
-					/* reset the full flag */
-					priv->data_low_tx_full = 0;
-				}
-			}
-		}
-
-		if (reg & ISL38XX_INT_IDENT_INIT) {
-			/* Device has been initialized */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING,
-			      "IRQ: Init flag, device initialized\n");
-#endif
-			wake_up(&priv->reset_done);
-		}
-
-		if (reg & ISL38XX_INT_IDENT_SLEEP) {
-			/* Device intends to move to powersave state */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
-#endif
-			isl38xx_handle_sleep_request(priv->control_block,
-						     &powerstate,
-						     priv->device_base);
-		}
-
-		if (reg & ISL38XX_INT_IDENT_WAKEUP) {
-			/* Device has been woken up to active state */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
-#endif
-
-			isl38xx_handle_wakeup(priv->control_block,
-					      &powerstate, priv->device_base);
-		}
-	} else {
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
-#endif
-		spin_unlock(&priv->slock);
-		return IRQ_NONE;
-	}
-
-	/* sleep -> ready */
-	if (islpci_get_state(priv) == PRV_STATE_SLEEP
-	    && powerstate == ISL38XX_PSM_ACTIVE_STATE)
-		islpci_set_state(priv, PRV_STATE_READY);
-
-	/* !sleep -> sleep */
-	if (islpci_get_state(priv) != PRV_STATE_SLEEP
-	    && powerstate == ISL38XX_PSM_POWERSAVE_STATE)
-		islpci_set_state(priv, PRV_STATE_SLEEP);
-
-	/* unlock the interrupt handler */
-	spin_unlock(&priv->slock);
-
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
-    Network Interface Control & Statistical functions
-******************************************************************************/
-static int
-islpci_open(struct net_device *ndev)
-{
-	u32 rc;
-	islpci_private *priv = netdev_priv(ndev);
-
-	/* reset data structures, upload firmware and reset device */
-	rc = islpci_reset(priv,1);
-	if (rc) {
-		prism54_bring_down(priv);
-		return rc; /* Returns informative message */
-	}
-
-	netif_start_queue(ndev);
-
-	/* Turn off carrier if in STA or Ad-hoc mode. It will be turned on
-	 * once the firmware receives a trap of being associated
-	 * (GEN_OID_LINKSTATE). In other modes (AP or WDS or monitor) we
-	 * should just leave the carrier on as its expected the firmware
-	 * won't send us a trigger. */
-	if (priv->iw_mode == IW_MODE_INFRA || priv->iw_mode == IW_MODE_ADHOC)
-		netif_carrier_off(ndev);
-	else
-		netif_carrier_on(ndev);
-
-	return 0;
-}
-
-static int
-islpci_close(struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name);
-
-	netif_stop_queue(ndev);
-
-	return prism54_bring_down(priv);
-}
-
-static int
-prism54_bring_down(islpci_private *priv)
-{
-	void __iomem *device_base = priv->device_base;
-	u32 reg;
-	/* we are going to shutdown the device */
-	islpci_set_state(priv, PRV_STATE_PREBOOT);
-
-	/* disable all device interrupts in case they weren't */
-	isl38xx_disable_interrupts(priv->device_base);
-
-	/* For safety reasons, we may want to ensure that no DMA transfer is
-	 * currently in progress by emptying the TX and RX queues. */
-
-	/* wait until interrupts have finished executing on other CPUs */
-	synchronize_irq(priv->pdev->irq);
-
-	reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-	reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT);
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	reg |= ISL38XX_CTRL_STAT_RESET;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	wmb();
-	udelay(ISL38XX_WRITEIO_DELAY);
-
-	/* clear the Reset bit */
-	reg &= ~ISL38XX_CTRL_STAT_RESET;
-	writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
-	wmb();
-
-	/* wait a while for the device to reset */
-	schedule_timeout_uninterruptible(msecs_to_jiffies(50));
-
-	return 0;
-}
-
-static int
-islpci_upload_fw(islpci_private *priv)
-{
-	islpci_state_t old_state;
-	u32 rc;
-
-	old_state = islpci_set_state(priv, PRV_STATE_BOOT);
-
-	printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name);
-
-	rc = isl_upload_firmware(priv);
-	if (rc) {
-		/* error uploading the firmware */
-		printk(KERN_ERR "%s: could not upload firmware ('%s')\n",
-		       priv->ndev->name, priv->firmware);
-
-		islpci_set_state(priv, old_state);
-		return rc;
-	}
-
-	printk(KERN_DEBUG "%s: firmware upload complete\n",
-	       priv->ndev->name);
-
-	islpci_set_state(priv, PRV_STATE_POSTBOOT);
-
-	return 0;
-}
-
-static int
-islpci_reset_if(islpci_private *priv)
-{
-	long remaining;
-	int result = -ETIME;
-	int count;
-
-	DEFINE_WAIT(wait);
-	prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE);
-
-	/* now the last step is to reset the interface */
-	isl38xx_interface_reset(priv->device_base, priv->device_host_address);
-	islpci_set_state(priv, PRV_STATE_PREINIT);
-
-        for(count = 0; count < 2 && result; count++) {
-		/* The software reset acknowledge needs about 220 msec here.
-		 * Be conservative and wait for up to one second. */
-
-		remaining = schedule_timeout_uninterruptible(HZ);
-
-		if(remaining > 0) {
-			result = 0;
-			break;
-		}
-
-		/* If we're here it's because our IRQ hasn't yet gone through.
-		 * Retry a bit more...
-		 */
-		printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n",
-			priv->ndev->name);
-	}
-
-	finish_wait(&priv->reset_done, &wait);
-
-	if (result) {
-		printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
-		return result;
-	}
-
-	islpci_set_state(priv, PRV_STATE_INIT);
-
-	/* Now that the device is 100% up, let's allow
-	 * for the other interrupts --
-	 * NOTE: this is not *yet* true since we've only allowed the
-	 * INIT interrupt on the IRQ line. We can perhaps poll
-	 * the IRQ line until we know for sure the reset went through */
-	isl38xx_enable_common_interrupts(priv->device_base);
-
-	down_write(&priv->mib_sem);
-	result = mgt_commit(priv);
-	if (result) {
-		printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
-		up_write(&priv->mib_sem);
-		return result;
-	}
-	up_write(&priv->mib_sem);
-
-	islpci_set_state(priv, PRV_STATE_READY);
-
-	printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name);
-	return 0;
-}
-
-int
-islpci_reset(islpci_private *priv, int reload_firmware)
-{
-	isl38xx_control_block *cb =    /* volatile not needed */
-		(isl38xx_control_block *) priv->control_block;
-	unsigned counter;
-	int rc;
-
-	if (reload_firmware)
-		islpci_set_state(priv, PRV_STATE_PREBOOT);
-	else
-		islpci_set_state(priv, PRV_STATE_POSTBOOT);
-
-	printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name);
-
-	/* disable all device interrupts in case they weren't */
-	isl38xx_disable_interrupts(priv->device_base);
-
-	/* flush all management queues */
-	priv->index_mgmt_tx = 0;
-	priv->index_mgmt_rx = 0;
-
-	/* clear the indexes in the frame pointer */
-	for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
-		cb->driver_curr_frag[counter] = cpu_to_le32(0);
-		cb->device_curr_frag[counter] = cpu_to_le32(0);
-	}
-
-	/* reset the mgmt receive queue */
-	for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
-		isl38xx_fragment *frag = &cb->rx_data_mgmt[counter];
-		frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
-		frag->flags = 0;
-		frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr);
-	}
-
-	for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
-		cb->rx_data_low[counter].address =
-		    cpu_to_le32((u32) priv->pci_map_rx_address[counter]);
-	}
-
-	/* since the receive queues are filled with empty fragments, now we can
-	 * set the corresponding indexes in the Control Block */
-	priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] =
-	    cpu_to_le32(ISL38XX_CB_RX_QSIZE);
-	priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] =
-	    cpu_to_le32(ISL38XX_CB_MGMT_QSIZE);
-
-	/* reset the remaining real index registers and full flags */
-	priv->free_data_rx = 0;
-	priv->free_data_tx = 0;
-	priv->data_low_tx_full = 0;
-
-	if (reload_firmware) { /* Should we load the firmware ? */
-	/* now that the data structures are cleaned up, upload
-	 * firmware and reset interface */
-		rc = islpci_upload_fw(priv);
-		if (rc) {
-			printk(KERN_ERR "%s: islpci_reset: failure\n",
-				priv->ndev->name);
-			return rc;
-		}
-	}
-
-	/* finally reset interface */
-	rc = islpci_reset_if(priv);
-	if (rc)
-		printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n");
-	return rc;
-}
-
-/******************************************************************************
-    Network device configuration functions
-******************************************************************************/
-static int
-islpci_alloc_memory(islpci_private *priv)
-{
-	int counter;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	printk(KERN_DEBUG "islpci_alloc_memory\n");
-#endif
-
-	/* remap the PCI device base address to accessible */
-	if (!(priv->device_base =
-	      ioremap(pci_resource_start(priv->pdev, 0),
-		      ISL38XX_PCI_MEM_SIZE))) {
-		/* error in remapping the PCI device memory address range */
-		printk(KERN_ERR "PCI memory remapping failed\n");
-		return -1;
-	}
-
-	/* memory layout for consistent DMA region:
-	 *
-	 * Area 1: Control Block for the device interface
-	 * Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that
-	 *         the number of supported stations in the AP determines the minimal
-	 *         size of the buffer !
-	 */
-
-	/* perform the allocation */
-	priv->driver_mem_address = dma_alloc_coherent(&priv->pdev->dev,
-						      HOST_MEM_BLOCK,
-						      &priv->device_host_address,
-						      GFP_KERNEL);
-
-	if (!priv->driver_mem_address) {
-		/* error allocating the block of PCI memory */
-		printk(KERN_ERR "%s: could not allocate DMA memory, aborting!",
-		       "prism54");
-		return -1;
-	}
-
-	/* assign the Control Block to the first address of the allocated area */
-	priv->control_block =
-	    (isl38xx_control_block *) priv->driver_mem_address;
-
-	/* set the Power Save Buffer pointer directly behind the CB */
-	priv->device_psm_buffer =
-		priv->device_host_address + CONTROL_BLOCK_SIZE;
-
-	/* make sure all buffer pointers are initialized */
-	for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
-		priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0);
-		priv->control_block->device_curr_frag[counter] = cpu_to_le32(0);
-	}
-
-	priv->index_mgmt_rx = 0;
-	memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx));
-	memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx));
-
-	/* allocate rx queue for management frames */
-	if (islpci_mgmt_rx_fill(priv->ndev) < 0)
-		goto out_free;
-
-	/* now get the data rx skb's */
-	memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx));
-	memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address));
-
-	for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
-		struct sk_buff *skb;
-
-		/* allocate an sk_buff for received data frames storage
-		 * each frame on receive size consists of 1 fragment
-		 * include any required allignment operations */
-		if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) {
-			/* error allocating an sk_buff structure elements */
-			printk(KERN_ERR "Error allocating skb.\n");
-			skb = NULL;
-			goto out_free;
-		}
-		skb_reserve(skb, (4 - (long) skb->data) & 0x03);
-		/* add the new allocated sk_buff to the buffer array */
-		priv->data_low_rx[counter] = skb;
-
-		/* map the allocated skb data area to pci */
-		priv->pci_map_rx_address[counter] =
-		    dma_map_single(&priv->pdev->dev, (void *)skb->data,
-				   MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
-		if (dma_mapping_error(&priv->pdev->dev, priv->pci_map_rx_address[counter])) {
-			priv->pci_map_rx_address[counter] = 0;
-			/* error mapping the buffer to device
-			   accessible memory address */
-			printk(KERN_ERR "failed to map skb DMA'able\n");
-			goto out_free;
-		}
-	}
-
-	prism54_acl_init(&priv->acl);
-	prism54_wpa_bss_ie_init(priv);
-	if (mgt_init(priv))
-		goto out_free;
-
-	return 0;
- out_free:
-	islpci_free_memory(priv);
-	return -1;
-}
-
-int
-islpci_free_memory(islpci_private *priv)
-{
-	int counter;
-
-	if (priv->device_base)
-		iounmap(priv->device_base);
-	priv->device_base = NULL;
-
-	/* free consistent DMA area... */
-	if (priv->driver_mem_address)
-		dma_free_coherent(&priv->pdev->dev, HOST_MEM_BLOCK,
-				  priv->driver_mem_address,
-				  priv->device_host_address);
-
-	/* clear some dangling pointers */
-	priv->driver_mem_address = NULL;
-	priv->device_host_address = 0;
-	priv->device_psm_buffer = 0;
-	priv->control_block = NULL;
-
-        /* clean up mgmt rx buffers */
-        for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
-		struct islpci_membuf *buf = &priv->mgmt_rx[counter];
-		if (buf->pci_addr)
-			dma_unmap_single(&priv->pdev->dev, buf->pci_addr,
-					 buf->size, DMA_FROM_DEVICE);
-		buf->pci_addr = 0;
-		kfree(buf->mem);
-		buf->size = 0;
-		buf->mem = NULL;
-        }
-
-	/* clean up data rx buffers */
-	for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
-		if (priv->pci_map_rx_address[counter])
-			dma_unmap_single(&priv->pdev->dev,
-					 priv->pci_map_rx_address[counter],
-					 MAX_FRAGMENT_SIZE_RX + 2,
-					 DMA_FROM_DEVICE);
-		priv->pci_map_rx_address[counter] = 0;
-
-		if (priv->data_low_rx[counter])
-			dev_kfree_skb(priv->data_low_rx[counter]);
-		priv->data_low_rx[counter] = NULL;
-	}
-
-	/* Free the access control list and the WPA list */
-	prism54_acl_clean(&priv->acl);
-	prism54_wpa_bss_ie_clean(priv);
-	mgt_clean(priv);
-
-	return 0;
-}
-
-#if 0
-static void
-islpci_set_multicast_list(struct net_device *dev)
-{
-	/* put device into promisc mode and let network layer handle it */
-}
-#endif
-
-static void islpci_ethtool_get_drvinfo(struct net_device *dev,
-                                       struct ethtool_drvinfo *info)
-{
-	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
-	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-}
-
-static const struct ethtool_ops islpci_ethtool_ops = {
-	.get_drvinfo = islpci_ethtool_get_drvinfo,
-};
-
-static const struct net_device_ops islpci_netdev_ops = {
-	.ndo_open 		= islpci_open,
-	.ndo_stop		= islpci_close,
-	.ndo_start_xmit		= islpci_eth_transmit,
-	.ndo_tx_timeout		= islpci_eth_tx_timeout,
-	.ndo_set_mac_address 	= prism54_set_mac_address,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static struct device_type wlan_type = {
-	.name	= "wlan",
-};
-
-struct net_device *
-islpci_setup(struct pci_dev *pdev)
-{
-	islpci_private *priv;
-	struct net_device *ndev = alloc_etherdev(sizeof (islpci_private));
-
-	if (!ndev)
-		return ndev;
-
-	pci_set_drvdata(pdev, ndev);
-	SET_NETDEV_DEV(ndev, &pdev->dev);
-	SET_NETDEV_DEVTYPE(ndev, &wlan_type);
-
-	/* setup the structure members */
-	ndev->base_addr = pci_resource_start(pdev, 0);
-	ndev->irq = pdev->irq;
-
-	/* initialize the function pointers */
-	ndev->netdev_ops = &islpci_netdev_ops;
-	ndev->wireless_handlers = &prism54_handler_def;
-	ndev->ethtool_ops = &islpci_ethtool_ops;
-
-	/* ndev->set_multicast_list = &islpci_set_multicast_list; */
-	ndev->addr_len = ETH_ALEN;
-	/* Get a non-zero dummy MAC address for nameif. Jean II */
-	memcpy(ndev->dev_addr, dummy_mac, ETH_ALEN);
-
-	ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT;
-
-	/* allocate a private device structure to the network device  */
-	priv = netdev_priv(ndev);
-	priv->ndev = ndev;
-	priv->pdev = pdev;
-	priv->monitor_type = ARPHRD_IEEE80211;
-	priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
-		priv->monitor_type : ARPHRD_ETHER;
-
-	/* Add pointers to enable iwspy support. */
-	priv->wireless_data.spy_data = &priv->spy_data;
-	ndev->wireless_data = &priv->wireless_data;
-
-	/* save the start and end address of the PCI memory area */
-	ndev->mem_start = (unsigned long) priv->device_base;
-	ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base);
-#endif
-
-	init_waitqueue_head(&priv->reset_done);
-
-	/* init the queue read locks, process wait counter */
-	mutex_init(&priv->mgmt_lock);
-	priv->mgmt_received = NULL;
-	init_waitqueue_head(&priv->mgmt_wqueue);
-	mutex_init(&priv->stats_lock);
-	spin_lock_init(&priv->slock);
-
-	/* init state machine with off#1 state */
-	priv->state = PRV_STATE_OFF;
-	priv->state_off = 1;
-
-	/* initialize workqueue's */
-	INIT_WORK(&priv->stats_work, prism54_update_stats);
-	priv->stats_timestamp = 0;
-
-	INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake);
-	priv->reset_task_pending = 0;
-
-	/* allocate various memory areas */
-	if (islpci_alloc_memory(priv))
-		goto do_free_netdev;
-
-	/* select the firmware file depending on the device id */
-	switch (pdev->device) {
-	case 0x3877:
-		strcpy(priv->firmware, ISL3877_IMAGE_FILE);
-		break;
-
-	case 0x3886:
-		strcpy(priv->firmware, ISL3886_IMAGE_FILE);
-		break;
-
-	default:
-		strcpy(priv->firmware, ISL3890_IMAGE_FILE);
-		break;
-	}
-
-	if (register_netdev(ndev)) {
-		DEBUG(SHOW_ERROR_MESSAGES,
-		      "ERROR: register_netdev() failed\n");
-		goto do_islpci_free_memory;
-	}
-
-	return ndev;
-
-      do_islpci_free_memory:
-	islpci_free_memory(priv);
-      do_free_netdev:
-	free_netdev(ndev);
-	priv = NULL;
-	return NULL;
-}
-
-islpci_state_t
-islpci_set_state(islpci_private *priv, islpci_state_t new_state)
-{
-	islpci_state_t old_state;
-
-	/* lock */
-	old_state = priv->state;
-
-	/* this means either a race condition or some serious error in
-	 * the driver code */
-	switch (new_state) {
-	case PRV_STATE_OFF:
-		priv->state_off++;
-		fallthrough;
-	default:
-		priv->state = new_state;
-		break;
-
-	case PRV_STATE_PREBOOT:
-		/* there are actually many off-states, enumerated by
-		 * state_off */
-		if (old_state == PRV_STATE_OFF)
-			priv->state_off--;
-
-		/* only if hw_unavailable is zero now it means we either
-		 * were in off#1 state, or came here from
-		 * somewhere else */
-		if (!priv->state_off)
-			priv->state = new_state;
-		break;
-	}
-#if 0
-	printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n",
-	       priv->ndev->name, old_state, new_state, priv->state_off);
-#endif
-
-	/* invariants */
-	BUG_ON(priv->state_off < 0);
-	BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF));
-	BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF));
-
-	/* unlock */
-	return old_state;
-}
diff --git a/drivers/net/wireless/intersil/prism54/islpci_dev.h b/drivers/net/wireless/intersil/prism54/islpci_dev.h
deleted file mode 100644
index 4753418dce62..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_dev.h
+++ /dev/null
@@ -1,204 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
- *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
- *  Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
- */
-
-#ifndef _ISLPCI_DEV_H
-#define _ISLPCI_DEV_H
-
-#include <linux/irqreturn.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-
-#include "isl_38xx.h"
-#include "isl_oid.h"
-#include "islpci_mgt.h"
-
-/* some states might not be superflous and may be removed when
-   design is finalized (hvr) */
-typedef enum {
-	PRV_STATE_OFF = 0,	/* this means hw_unavailable is != 0 */
-	PRV_STATE_PREBOOT,	/* we are in a pre-boot state (empty RAM) */
-	PRV_STATE_BOOT,		/* boot state (fw upload, run fw) */
-	PRV_STATE_POSTBOOT,	/* after boot state, need reset now */
-	PRV_STATE_PREINIT,	/* pre-init state */
-	PRV_STATE_INIT,		/* init state (restore MIB backup to device) */
-	PRV_STATE_READY,	/* driver&device are in operational state */
-	PRV_STATE_SLEEP		/* device in sleep mode */
-} islpci_state_t;
-
-/* ACL using MAC address */
-struct mac_entry {
-   struct list_head _list;
-   char addr[ETH_ALEN];
-};
-
-struct islpci_acl {
-   enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
-   struct list_head mac_list;  /* a list of mac_entry */
-   int size;   /* size of queue */
-   struct mutex lock;   /* accessed in ioctls and trap_work */
-};
-
-struct islpci_membuf {
-	int size;                   /* size of memory */
-	void *mem;                  /* address of memory as seen by CPU */
-	dma_addr_t pci_addr;        /* address of memory as seen by device */
-};
-
-#define MAX_BSS_WPA_IE_COUNT 64
-#define MAX_WPA_IE_LEN 64
-struct islpci_bss_wpa_ie {
-	struct list_head list;
-	unsigned long last_update;
-	u8 bssid[ETH_ALEN];
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-
-};
-
-typedef struct {
-	spinlock_t slock;	/* generic spinlock; */
-
-	u32 priv_oid;
-
-	/* our mib cache */
-	u32 iw_mode;
-        struct rw_semaphore mib_sem;
-	void **mib;
-	char nickname[IW_ESSID_MAX_SIZE+1];
-
-	/* Take care of the wireless stats */
-	struct work_struct stats_work;
-	struct mutex stats_lock;
-	/* remember when we last updated the stats */
-	unsigned long stats_timestamp;
-	/* The first is accessed under semaphore locking.
-	 * The second is the clean one we return to iwconfig.
-	 */
-	struct iw_statistics local_iwstatistics;
-	struct iw_statistics iwstatistics;
-
-	struct iw_spy_data spy_data; /* iwspy support */
-
-	struct iw_public_data wireless_data;
-
-	int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
-
-	struct islpci_acl acl;
-
-	/* PCI bus allocation & configuration members */
-	struct pci_dev *pdev;	/* PCI structure information */
-	char firmware[33];
-
-	void __iomem *device_base;	/* ioremapped device base address */
-
-	/* consistent DMA region */
-	void *driver_mem_address;	/* base DMA address */
-	dma_addr_t device_host_address;	/* base DMA address (bus address) */
-	dma_addr_t device_psm_buffer;	/* host memory for PSM buffering (bus address) */
-
-	/* our network_device structure  */
-	struct net_device *ndev;
-
-	/* device queue interface members */
-	struct isl38xx_cb *control_block;	/* device control block
-							   (== driver_mem_address!) */
-
-	/* Each queue has three indexes:
-	 *   free/index_mgmt/data_rx/tx (called index, see below),
-	 *   driver_curr_frag, and device_curr_frag (in the control block)
-	 * All indexes are ever-increasing, but interpreted modulo the
-	 * device queue size when used.
-	 *   index <= device_curr_frag <= driver_curr_frag  at all times
-	 * For rx queues, [index, device_curr_frag) contains fragments
-	 * that the interrupt processing needs to handle (owned by driver).
-	 * [device_curr_frag, driver_curr_frag) is the free space in the
-	 * rx queue, waiting for data (owned by device).  The driver
-	 * increments driver_curr_frag to indicate to the device that more
-	 * buffers are available.
-	 * If device_curr_frag == driver_curr_frag, no more rx buffers are
-	 * available, and the rx DMA engine of the device is halted.
-	 * For tx queues, [index, device_curr_frag) contains fragments
-	 * where tx is done; they need to be freed (owned by driver).
-	 * [device_curr_frag, driver_curr_frag) contains the frames
-	 * that are being transferred (owned by device).  The driver
-	 * increments driver_curr_frag to indicate that more tx work
-	 * needs to be done.
-	 */
-	u32 index_mgmt_rx;              /* real index mgmt rx queue */
-	u32 index_mgmt_tx;              /* read index mgmt tx queue */
-	u32 free_data_rx;	/* free pointer data rx queue */
-	u32 free_data_tx;	/* free pointer data tx queue */
-	u32 data_low_tx_full;	/* full detected flag */
-
-	/* frame memory buffers for the device queues */
-	struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
-	struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
-	struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
-	struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
-	dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
-	dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
-
-	/* wait for a reset interrupt */
-	wait_queue_head_t reset_done;
-
-	/* used by islpci_mgt_transaction */
-	struct mutex mgmt_lock; /* serialize access to mailbox and wqueue */
-	struct islpci_mgmtframe *mgmt_received;	  /* mbox for incoming frame */
-	wait_queue_head_t mgmt_wqueue;            /* waitqueue for mbox */
-
-	/* state machine */
-	islpci_state_t state;
-	int state_off;		/* enumeration of off-state, if 0 then
-				 * we're not in any off-state */
-
-	/* WPA stuff */
-	int wpa; /* WPA mode enabled */
-	struct list_head bss_wpa_list;
-	int num_bss_wpa;
-	struct mutex wpa_lock;
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-
-	struct work_struct reset_task;
-	int reset_task_pending;
-} islpci_private;
-
-static inline islpci_state_t
-islpci_get_state(islpci_private *priv)
-{
-	/* lock */
-	return priv->state;
-	/* unlock */
-}
-
-islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
-
-#define ISLPCI_TX_TIMEOUT               (2*HZ)
-
-irqreturn_t islpci_interrupt(int, void *);
-
-int prism54_post_setup(islpci_private *, int);
-int islpci_reset(islpci_private *, int);
-
-static inline void
-islpci_trigger(islpci_private *priv)
-{
-	isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
-			       priv->device_base);
-}
-
-int islpci_free_memory(islpci_private *);
-struct net_device *islpci_setup(struct pci_dev *);
-
-#define DRV_NAME	"prism54"
-#define DRV_VERSION	"1.2"
-
-#endif				/* _ISLPCI_DEV_H */
diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.c b/drivers/net/wireless/intersil/prism54/islpci_eth.c
deleted file mode 100644
index 74dd65716afd..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_eth.c
+++ /dev/null
@@ -1,489 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
- */
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-#include <asm/byteorder.h>
-
-#include "prismcompat.h"
-#include "isl_38xx.h"
-#include "islpci_eth.h"
-#include "islpci_mgt.h"
-#include "oid_mgt.h"
-
-/******************************************************************************
-    Network Interface functions
-******************************************************************************/
-void
-islpci_eth_cleanup_transmit(islpci_private *priv,
-			    isl38xx_control_block *control_block)
-{
-	struct sk_buff *skb;
-	u32 index;
-
-	/* compare the control block read pointer with the free pointer */
-	while (priv->free_data_tx !=
-	       le32_to_cpu(control_block->
-			   device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
-		/* read the index of the first fragment to be freed */
-		index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
-
-		/* check for holes in the arrays caused by multi fragment frames
-		 * searching for the last fragment of a frame */
-		if (priv->pci_map_tx_address[index]) {
-			/* entry is the last fragment of a frame
-			 * free the skb structure and unmap pci memory */
-			skb = priv->data_low_tx[index];
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING,
-			      "cleanup skb %p skb->data %p skb->len %u truesize %u\n",
-			      skb, skb->data, skb->len, skb->truesize);
-#endif
-
-			dma_unmap_single(&priv->pdev->dev,
-					 priv->pci_map_tx_address[index],
-					 skb->len, DMA_TO_DEVICE);
-			dev_kfree_skb_irq(skb);
-			skb = NULL;
-		}
-		/* increment the free data low queue pointer */
-		priv->free_data_tx++;
-	}
-}
-
-netdev_tx_t
-islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	isl38xx_control_block *cb = priv->control_block;
-	u32 index;
-	dma_addr_t pci_map_address;
-	int frame_size;
-	isl38xx_fragment *fragment;
-	int offset;
-	struct sk_buff *newskb;
-	int newskb_offset;
-	unsigned long flags;
-	unsigned char wds_mac[6];
-	u32 curr_frag;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
-#endif
-
-	/* lock the driver code */
-	spin_lock_irqsave(&priv->slock, flags);
-
-	/* check whether the destination queue has enough fragments for the frame */
-	curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
-	if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
-		printk(KERN_ERR "%s: transmit device queue full when awake\n",
-		       ndev->name);
-		netif_stop_queue(ndev);
-
-		/* trigger the device */
-		isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
-				  ISL38XX_DEV_INT_REG);
-		udelay(ISL38XX_WRITEIO_DELAY);
-		goto drop_free;
-	}
-	/* Check alignment and WDS frame formatting. The start of the packet should
-	 * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
-	 * and add WDS address information */
-	if (likely(((long) skb->data & 0x03) | init_wds)) {
-		/* get the number of bytes to add and re-align */
-		offset = (4 - (long) skb->data) & 0x03;
-		offset += init_wds ? 6 : 0;
-
-		/* check whether the current skb can be used  */
-		if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
-			unsigned char *src = skb->data;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
-			      init_wds);
-#endif
-
-			/* align the buffer on 4-byte boundary */
-			skb_reserve(skb, (4 - (long) skb->data) & 0x03);
-			if (init_wds) {
-				/* wds requires an additional address field of 6 bytes */
-				skb_put(skb, 6);
-#ifdef ISLPCI_ETH_DEBUG
-				printk("islpci_eth_transmit:wds_mac\n");
-#endif
-				memmove(skb->data + 6, src, skb->len);
-				skb_copy_to_linear_data(skb, wds_mac, 6);
-			} else {
-				memmove(skb->data, src, skb->len);
-			}
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
-			      src, skb->len);
-#endif
-		} else {
-			newskb =
-			    dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
-			if (unlikely(newskb == NULL)) {
-				printk(KERN_ERR "%s: Cannot allocate skb\n",
-				       ndev->name);
-				goto drop_free;
-			}
-			newskb_offset = (4 - (long) newskb->data) & 0x03;
-
-			/* Check if newskb->data is aligned */
-			if (newskb_offset)
-				skb_reserve(newskb, newskb_offset);
-
-			skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
-			if (init_wds) {
-				skb_copy_from_linear_data(skb,
-							  newskb->data + 6,
-							  skb->len);
-				skb_copy_to_linear_data(newskb, wds_mac, 6);
-#ifdef ISLPCI_ETH_DEBUG
-				printk("islpci_eth_transmit:wds_mac\n");
-#endif
-			} else
-				skb_copy_from_linear_data(skb, newskb->data,
-							  skb->len);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
-			      newskb->data, skb->data, skb->len, init_wds);
-#endif
-
-			newskb->dev = skb->dev;
-			dev_kfree_skb_irq(skb);
-			skb = newskb;
-		}
-	}
-	/* display the buffer contents for debugging */
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
-	display_buffer((char *) skb->data, skb->len);
-#endif
-
-	/* map the skb buffer to pci memory for DMA operation */
-	pci_map_address = dma_map_single(&priv->pdev->dev, (void *)skb->data,
-					 skb->len, DMA_TO_DEVICE);
-	if (dma_mapping_error(&priv->pdev->dev, pci_map_address)) {
-		printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
-		       ndev->name);
-		goto drop_free;
-	}
-	/* Place the fragment in the control block structure. */
-	index = curr_frag % ISL38XX_CB_TX_QSIZE;
-	fragment = &cb->tx_data_low[index];
-
-	priv->pci_map_tx_address[index] = pci_map_address;
-	/* store the skb address for future freeing  */
-	priv->data_low_tx[index] = skb;
-	/* set the proper fragment start address and size information */
-	frame_size = skb->len;
-	fragment->size = cpu_to_le16(frame_size);
-	fragment->flags = cpu_to_le16(0);	/* set to 1 if more fragments */
-	fragment->address = cpu_to_le32(pci_map_address);
-	curr_frag++;
-
-	/* The fragment address in the control block must have been
-	 * written before announcing the frame buffer to device. */
-	wmb();
-	cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
-
-	if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
-	    > ISL38XX_CB_TX_QSIZE) {
-		/* stop sends from upper layers */
-		netif_stop_queue(ndev);
-
-		/* set the full flag for the transmission queue */
-		priv->data_low_tx_full = 1;
-	}
-
-	ndev->stats.tx_packets++;
-	ndev->stats.tx_bytes += skb->len;
-
-	/* trigger the device */
-	islpci_trigger(priv);
-
-	/* unlock the driver code */
-	spin_unlock_irqrestore(&priv->slock, flags);
-
-	return NETDEV_TX_OK;
-
-      drop_free:
-	ndev->stats.tx_dropped++;
-	spin_unlock_irqrestore(&priv->slock, flags);
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static inline int
-islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
-{
-	/* The card reports full 802.11 packets but with a 20 bytes
-	 * header and without the FCS. But there a is a bit that
-	 * indicates if the packet is corrupted :-) */
-	struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
-
-	if (hdr->flags & 0x01)
-		/* This one is bad. Drop it ! */
-		return -1;
-	if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
-		struct avs_80211_1_header *avs;
-		/* extract the relevant data from the header */
-		u32 clock = le32_to_cpu(hdr->clock);
-		u8 rate = hdr->rate;
-		u16 freq = le16_to_cpu(hdr->freq);
-		u8 rssi = hdr->rssi;
-
-		skb_pull(*skb, sizeof (struct rfmon_header));
-
-		if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
-			struct sk_buff *newskb = skb_copy_expand(*skb,
-								 sizeof (struct
-									 avs_80211_1_header),
-								 0, GFP_ATOMIC);
-			if (newskb) {
-				dev_kfree_skb_irq(*skb);
-				*skb = newskb;
-			} else
-				return -1;
-			/* This behavior is not very subtile... */
-		}
-
-		/* make room for the new header and fill it. */
-		avs = skb_push(*skb, sizeof(struct avs_80211_1_header));
-
-		avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
-		avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
-		avs->mactime = cpu_to_be64(clock);
-		avs->hosttime = cpu_to_be64(jiffies);
-		avs->phytype = cpu_to_be32(6);	/*OFDM: 6 for (g), 8 for (a) */
-		avs->channel = cpu_to_be32(channel_of_freq(freq));
-		avs->datarate = cpu_to_be32(rate * 5);
-		avs->antenna = cpu_to_be32(0);	/*unknown */
-		avs->priority = cpu_to_be32(0);	/*unknown */
-		avs->ssi_type = cpu_to_be32(3);	/*2: dBm, 3: raw RSSI */
-		avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
-		avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise);	/*better than 'undefined', I assume */
-		avs->preamble = cpu_to_be32(0);	/*unknown */
-		avs->encoding = cpu_to_be32(0);	/*unknown */
-	} else
-		skb_pull(*skb, sizeof (struct rfmon_header));
-
-	(*skb)->protocol = htons(ETH_P_802_2);
-	skb_reset_mac_header(*skb);
-	(*skb)->pkt_type = PACKET_OTHERHOST;
-
-	return 0;
-}
-
-int
-islpci_eth_receive(islpci_private *priv)
-{
-	struct net_device *ndev = priv->ndev;
-	isl38xx_control_block *control_block = priv->control_block;
-	struct sk_buff *skb;
-	u16 size;
-	u32 index, offset;
-	unsigned char *src;
-	int discard = 0;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
-#endif
-
-	/* the device has written an Ethernet frame in the data area
-	 * of the sk_buff without updating the structure, do it now */
-	index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
-	size = le16_to_cpu(control_block->rx_data_low[index].size);
-	skb = priv->data_low_rx[index];
-	offset = ((unsigned long)
-		  le32_to_cpu(control_block->rx_data_low[index].address) -
-		  (unsigned long) skb->data) & 3;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING,
-	      "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n",
-	      control_block->rx_data_low[priv->free_data_rx].address, skb->data,
-	      skb->len, offset, skb->truesize);
-#endif
-
-	/* delete the streaming DMA mapping before processing the skb */
-	dma_unmap_single(&priv->pdev->dev, priv->pci_map_rx_address[index],
-			 MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
-
-	/* update the skb structure and align the buffer */
-	skb_put(skb, size);
-	if (offset) {
-		/* shift the buffer allocation offset bytes to get the right frame */
-		skb_pull(skb, 2);
-		skb_put(skb, 2);
-	}
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	/* display the buffer contents for debugging */
-	DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
-	display_buffer((char *) skb->data, skb->len);
-#endif
-
-	/* check whether WDS is enabled and whether the data frame is a WDS frame */
-
-	if (init_wds) {
-		/* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
-		src = skb->data + 6;
-		memmove(skb->data, src, skb->len - 6);
-		skb_trim(skb, skb->len - 6);
-	}
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
-	DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
-
-	/* display the buffer contents for debugging */
-	DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
-	display_buffer((char *) skb->data, skb->len);
-#endif
-	/* take care of monitor mode and spy monitoring. */
-	if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) {
-		skb->dev = ndev;
-		discard = islpci_monitor_rx(priv, &skb);
-	} else {
-		if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
-			/* The packet has a rx_annex. Read it for spy monitoring, Then
-			 * remove it, while keeping the 2 leading MAC addr.
-			 */
-			struct iw_quality wstats;
-			struct rx_annex_header *annex =
-			    (struct rx_annex_header *) skb->data;
-			wstats.level = annex->rfmon.rssi;
-			/* The noise value can be a bit outdated if nobody's
-			 * reading wireless stats... */
-			wstats.noise = priv->local_iwstatistics.qual.noise;
-			wstats.qual = wstats.level - wstats.noise;
-			wstats.updated = 0x07;
-			/* Update spy records */
-			wireless_spy_update(ndev, annex->addr2, &wstats);
-
-			skb_copy_from_linear_data(skb,
-						  (skb->data +
-						   sizeof(struct rfmon_header)),
-						  2 * ETH_ALEN);
-			skb_pull(skb, sizeof (struct rfmon_header));
-		}
-		skb->protocol = eth_type_trans(skb, ndev);
-	}
-	skb->ip_summed = CHECKSUM_NONE;
-	ndev->stats.rx_packets++;
-	ndev->stats.rx_bytes += size;
-
-	/* deliver the skb to the network layer */
-#ifdef ISLPCI_ETH_DEBUG
-	printk
-	    ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
-	     skb->data[0], skb->data[1], skb->data[2], skb->data[3],
-	     skb->data[4], skb->data[5]);
-#endif
-	if (unlikely(discard)) {
-		dev_kfree_skb_irq(skb);
-		skb = NULL;
-	} else
-		netif_rx(skb);
-
-	/* increment the read index for the rx data low queue */
-	priv->free_data_rx++;
-
-	/* add one or more sk_buff structures */
-	while (index =
-	       le32_to_cpu(control_block->
-			   driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
-	       index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
-		/* allocate an sk_buff for received data frames storage
-		 * include any required allignment operations */
-		skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
-		if (unlikely(skb == NULL)) {
-			/* error allocating an sk_buff structure elements */
-			DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
-			break;
-		}
-		skb_reserve(skb, (4 - (long) skb->data) & 0x03);
-		/* store the new skb structure pointer */
-		index = index % ISL38XX_CB_RX_QSIZE;
-		priv->data_low_rx[index] = skb;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_TRACING,
-		      "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n",
-		      skb, skb->data, skb->len, index, skb->truesize);
-#endif
-
-		/* set the streaming DMA mapping for proper PCI bus operation */
-		priv->pci_map_rx_address[index] =
-		    dma_map_single(&priv->pdev->dev, (void *)skb->data,
-				   MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
-		if (dma_mapping_error(&priv->pdev->dev, priv->pci_map_rx_address[index])) {
-			/* error mapping the buffer to device accessible memory address */
-			DEBUG(SHOW_ERROR_MESSAGES,
-			      "Error mapping DMA address\n");
-
-			/* free the skbuf structure before aborting */
-			dev_kfree_skb_irq(skb);
-			skb = NULL;
-			break;
-		}
-		/* update the fragment address */
-		control_block->rx_data_low[index].address =
-			cpu_to_le32((u32)priv->pci_map_rx_address[index]);
-		wmb();
-
-		/* increment the driver read pointer */
-		le32_add_cpu(&control_block->
-			     driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
-	}
-
-	/* trigger the device */
-	islpci_trigger(priv);
-
-	return 0;
-}
-
-void
-islpci_do_reset_and_wake(struct work_struct *work)
-{
-	islpci_private *priv = container_of(work, islpci_private, reset_task);
-
-	islpci_reset(priv, 1);
-	priv->reset_task_pending = 0;
-	smp_wmb();
-	netif_wake_queue(priv->ndev);
-}
-
-void
-islpci_eth_tx_timeout(struct net_device *ndev, unsigned int txqueue)
-{
-	islpci_private *priv = netdev_priv(ndev);
-
-	/* increment the transmit error counter */
-	ndev->stats.tx_errors++;
-
-	if (!priv->reset_task_pending) {
-		printk(KERN_WARNING
-			"%s: tx_timeout, scheduling reset", ndev->name);
-		netif_stop_queue(ndev);
-		priv->reset_task_pending = 1;
-		schedule_work(&priv->reset_task);
-	} else {
-		printk(KERN_WARNING
-			"%s: tx_timeout, waiting for reset", ndev->name);
-	}
-}
diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.h b/drivers/net/wireless/intersil/prism54/islpci_eth.h
deleted file mode 100644
index e433ccdc526b..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_eth.h
+++ /dev/null
@@ -1,59 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- */
-
-#ifndef _ISLPCI_ETH_H
-#define _ISLPCI_ETH_H
-
-#include "isl_38xx.h"
-#include "islpci_dev.h"
-
-struct rfmon_header {
-	__le16 unk0;		/* = 0x0000 */
-	__le16 length;		/* = 0x1400 */
-	__le32 clock;		/* 1MHz clock */
-	u8 flags;
-	u8 unk1;
-	u8 rate;
-	u8 unk2;
-	__le16 freq;
-	__le16 unk3;
-	u8 rssi;
-	u8 padding[3];
-} __packed;
-
-struct rx_annex_header {
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	struct rfmon_header rfmon;
-} __packed;
-
-/* wlan-ng (and hopefully others) AVS header, version one.  Fields in
- * network byte order. */
-#define P80211CAPTURE_VERSION 0x80211001
-
-struct avs_80211_1_header {
-	__be32 version;
-	__be32 length;
-	__be64 mactime;
-	__be64 hosttime;
-	__be32 phytype;
-	__be32 channel;
-	__be32 datarate;
-	__be32 antenna;
-	__be32 priority;
-	__be32 ssi_type;
-	__be32 ssi_signal;
-	__be32 ssi_noise;
-	__be32 preamble;
-	__be32 encoding;
-};
-
-void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *);
-netdev_tx_t islpci_eth_transmit(struct sk_buff *, struct net_device *);
-int islpci_eth_receive(islpci_private *);
-void islpci_eth_tx_timeout(struct net_device *, unsigned int txqueue);
-void islpci_do_reset_and_wake(struct work_struct *);
-
-#endif				/* _ISL_GEN_H */
diff --git a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
deleted file mode 100644
index 31a1e61326ff..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
+++ /dev/null
@@ -1,316 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
- */
-
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/init.h> /* For __init, __exit */
-#include <linux/dma-mapping.h>
-
-#include "prismcompat.h"
-#include "islpci_dev.h"
-#include "islpci_mgt.h"		/* for pc_debug */
-#include "isl_oid.h"
-
-MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>");
-MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter");
-MODULE_LICENSE("GPL");
-
-static int	init_pcitm = 0;
-module_param(init_pcitm, int, 0);
-
-/* In this order: vendor, device, subvendor, subdevice, class, class_mask,
- * driver_data
- * If you have an update for this please contact prism54-devel@prism54.org
- * The latest list can be found at http://wireless.wiki.kernel.org/en/users/Drivers/p54
- */
-static const struct pci_device_id prism54_id_tbl[] = {
-	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
-	{
-	 0x1260, 0x3890,
-	 PCI_ANY_ID, PCI_ANY_ID,
-	 0, 0, 0
-	},
-
-	/* 3COM 3CRWE154G72 Wireless LAN adapter */
-	{
-	 PCI_VDEVICE(3COM, 0x6001), 0
-	},
-
-	/* Intersil PRISM Indigo Wireless LAN adapter */
-	{
-	 0x1260, 0x3877,
-	 PCI_ANY_ID, PCI_ANY_ID,
-	 0, 0, 0
-	},
-
-	/* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
-	{
-	 0x1260, 0x3886,
-	 PCI_ANY_ID, PCI_ANY_ID,
-	 0, 0, 0
-	},
-
-	/* End of list */
-	{0,0,0,0,0,0,0}
-};
-
-/* register the device with the Hotplug facilities of the kernel */
-MODULE_DEVICE_TABLE(pci, prism54_id_tbl);
-
-static int prism54_probe(struct pci_dev *, const struct pci_device_id *);
-static void prism54_remove(struct pci_dev *);
-static int __maybe_unused prism54_suspend(struct device *);
-static int __maybe_unused prism54_resume(struct device *);
-
-static SIMPLE_DEV_PM_OPS(prism54_pm_ops, prism54_suspend, prism54_resume);
-
-static struct pci_driver prism54_driver = {
-	.name = DRV_NAME,
-	.id_table = prism54_id_tbl,
-	.probe = prism54_probe,
-	.remove = prism54_remove,
-	.driver.pm = &prism54_pm_ops,
-};
-
-/******************************************************************************
-    Module initialization functions
-******************************************************************************/
-
-static int
-prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct net_device *ndev;
-	u8 latency_tmr;
-	u32 mem_addr;
-	islpci_private *priv;
-	int rvalue;
-
-	/* Enable the pci device */
-	if (pci_enable_device(pdev)) {
-		printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME);
-		return -ENODEV;
-	}
-
-	/* check whether the latency timer is set correctly */
-	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_tmr);
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_TRACING, "latency timer: %x\n", latency_tmr);
-#endif
-	if (latency_tmr < PCIDEVICE_LATENCY_TIMER_MIN) {
-		/* set the latency timer */
-		pci_write_config_byte(pdev, PCI_LATENCY_TIMER,
-				      PCIDEVICE_LATENCY_TIMER_VAL);
-	}
-
-	/* enable PCI DMA */
-	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
-		goto do_pci_disable_device;
-        }
-
-	/* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT)
-	 * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT)
-	 *	The RETRY_TIMEOUT is used to set the number of retries that the core, as a
-	 *	Master, will perform before abandoning a cycle. The default value for
-	 *	RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
-	 *	devices. A write of zero to the RETRY_TIMEOUT register disables this
-	 *	function to allow use with any non-compliant legacy devices that may
-	 *	execute more retries.
-	 *
-	 *	Writing zero to both these two registers will disable both timeouts and
-	 *	*can* solve problems caused by devices that are slow to respond.
-	 *	Make this configurable - MSW
-	 */
-	if ( init_pcitm >= 0 ) {
-		pci_write_config_byte(pdev, 0x40, (u8)init_pcitm);
-		pci_write_config_byte(pdev, 0x41, (u8)init_pcitm);
-	} else {
-		printk(KERN_INFO "PCI TRDY/RETRY unchanged\n");
-	}
-
-	/* request the pci device I/O regions */
-	rvalue = pci_request_regions(pdev, DRV_NAME);
-	if (rvalue) {
-		printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n",
-		       DRV_NAME, rvalue);
-		goto do_pci_disable_device;
-	}
-
-	/* check if the memory window is indeed set */
-	rvalue = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &mem_addr);
-	if (rvalue || !mem_addr) {
-		printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n",
-		       DRV_NAME);
-		goto do_pci_release_regions;
-	}
-
-	/* enable PCI bus-mastering */
-	DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME);
-	pci_set_master(pdev);
-
-	/* enable MWI */
-	pci_try_set_mwi(pdev);
-
-	/* setup the network device interface and its structure */
-	if (!(ndev = islpci_setup(pdev))) {
-		/* error configuring the driver as a network device */
-		printk(KERN_ERR "%s: could not configure network device\n",
-		       DRV_NAME);
-		goto do_pci_clear_mwi;
-	}
-
-	priv = netdev_priv(ndev);
-	islpci_set_state(priv, PRV_STATE_PREBOOT); /* we are attempting to boot */
-
-	/* card is in unknown state yet, might have some interrupts pending */
-	isl38xx_disable_interrupts(priv->device_base);
-
-	/* request for the interrupt before uploading the firmware */
-	rvalue = request_irq(pdev->irq, islpci_interrupt,
-			     IRQF_SHARED, ndev->name, priv);
-
-	if (rvalue) {
-		/* error, could not hook the handler to the irq */
-		printk(KERN_ERR "%s: could not install IRQ handler\n",
-		       ndev->name);
-		goto do_unregister_netdev;
-	}
-
-	/* firmware upload is triggered in islpci_open */
-
-	return 0;
-
-      do_unregister_netdev:
-	unregister_netdev(ndev);
-	islpci_free_memory(priv);
-	free_netdev(ndev);
-	priv = NULL;
-      do_pci_clear_mwi:
-	pci_clear_mwi(pdev);
-      do_pci_release_regions:
-	pci_release_regions(pdev);
-      do_pci_disable_device:
-	pci_disable_device(pdev);
-	return -EIO;
-}
-
-/* set by cleanup_module */
-static volatile int __in_cleanup_module = 0;
-
-/* this one removes one(!!) instance only */
-static void
-prism54_remove(struct pci_dev *pdev)
-{
-	struct net_device *ndev = pci_get_drvdata(pdev);
-	islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
-	BUG_ON(!priv);
-
-	if (!__in_cleanup_module) {
-		printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name);
-		islpci_set_state(priv, PRV_STATE_OFF);
-	}
-
-	printk(KERN_DEBUG "%s: removing device\n", ndev->name);
-
-	unregister_netdev(ndev);
-
-	/* free the interrupt request */
-
-	if (islpci_get_state(priv) != PRV_STATE_OFF) {
-		isl38xx_disable_interrupts(priv->device_base);
-		islpci_set_state(priv, PRV_STATE_OFF);
-		/* This bellow causes a lockup at rmmod time. It might be
-		 * because some interrupts still linger after rmmod time,
-		 * see bug #17 */
-		/* pci_set_power_state(pdev, 3);*/	/* try to power-off */
-	}
-
-	free_irq(pdev->irq, priv);
-
-	/* free the PCI memory and unmap the remapped page */
-	islpci_free_memory(priv);
-
-	free_netdev(ndev);
-	priv = NULL;
-
-	pci_clear_mwi(pdev);
-
-	pci_release_regions(pdev);
-
-	pci_disable_device(pdev);
-}
-
-static int __maybe_unused
-prism54_suspend(struct device *dev)
-{
-	struct net_device *ndev = dev_get_drvdata(dev);
-	islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
-	BUG_ON(!priv);
-
-	/* tell the device not to trigger interrupts for now... */
-	isl38xx_disable_interrupts(priv->device_base);
-
-	/* from now on assume the hardware was already powered down
-	   and don't touch it anymore */
-	islpci_set_state(priv, PRV_STATE_OFF);
-
-	netif_stop_queue(ndev);
-	netif_device_detach(ndev);
-
-	return 0;
-}
-
-static int __maybe_unused
-prism54_resume(struct device *dev)
-{
-	struct net_device *ndev = dev_get_drvdata(dev);
-	islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
-
-	BUG_ON(!priv);
-
-	printk(KERN_NOTICE "%s: got resume request\n", ndev->name);
-
-	/* alright let's go into the PREBOOT state */
-	islpci_reset(priv, 1);
-
-	netif_device_attach(ndev);
-	netif_start_queue(ndev);
-
-	return 0;
-}
-
-static int __init
-prism54_module_init(void)
-{
-	printk(KERN_INFO "Loaded %s driver, version %s\n",
-	       DRV_NAME, DRV_VERSION);
-
-	__bug_on_wrong_struct_sizes ();
-
-	return pci_register_driver(&prism54_driver);
-}
-
-/* by the time prism54_module_exit() terminates, as a postcondition
- * all instances will have been destroyed by calls to
- * prism54_remove() */
-static void __exit
-prism54_module_exit(void)
-{
-	__in_cleanup_module = 1;
-
-	pci_unregister_driver(&prism54_driver);
-
-	printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME);
-
-	__in_cleanup_module = 0;
-}
-
-/* register entry points */
-module_init(prism54_module_init);
-module_exit(prism54_module_exit);
-/* EOF */
diff --git a/drivers/net/wireless/intersil/prism54/islpci_mgt.c b/drivers/net/wireless/intersil/prism54/islpci_mgt.c
deleted file mode 100644
index 0c7fb76c7d1c..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_mgt.c
+++ /dev/null
@@ -1,491 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright 2004 Jens Maurer <Jens.Maurer@gmx.net>
- */
-
-#include <linux/netdevice.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include <asm/io.h>
-#include <linux/if_arp.h>
-
-#include "prismcompat.h"
-#include "isl_38xx.h"
-#include "islpci_mgt.h"
-#include "isl_oid.h"		/* additional types and defs for isl38xx fw */
-#include "isl_ioctl.h"
-
-#include <net/iw_handler.h>
-
-/******************************************************************************
-        Global variable definition section
-******************************************************************************/
-int pc_debug = VERBOSE;
-module_param(pc_debug, int, 0);
-
-/******************************************************************************
-    Driver general functions
-******************************************************************************/
-#if VERBOSE > SHOW_ERROR_MESSAGES
-void
-display_buffer(char *buffer, int length)
-{
-	if ((pc_debug & SHOW_BUFFER_CONTENTS) == 0)
-		return;
-
-	while (length > 0) {
-		printk("[%02x]", *buffer & 255);
-		length--;
-		buffer++;
-	}
-
-	printk("\n");
-}
-#endif
-
-/*****************************************************************************
-    Queue handling for management frames
-******************************************************************************/
-
-/*
- * Helper function to create a PIMFOR management frame header.
- */
-static void
-pimfor_encode_header(int operation, u32 oid, u32 length, pimfor_header_t *h)
-{
-	h->version = PIMFOR_VERSION;
-	h->operation = operation;
-	h->device_id = PIMFOR_DEV_ID_MHLI_MIB;
-	h->flags = 0;
-	h->oid = cpu_to_be32(oid);
-	h->length = cpu_to_be32(length);
-}
-
-/*
- * Helper function to analyze a PIMFOR management frame header.
- */
-static pimfor_header_t *
-pimfor_decode_header(void *data, int len)
-{
-	pimfor_header_t *h = data;
-
-	while ((void *) h < data + len) {
-		if (h->flags & PIMFOR_FLAG_LITTLE_ENDIAN) {
-			le32_to_cpus(&h->oid);
-			le32_to_cpus(&h->length);
-		} else {
-			be32_to_cpus(&h->oid);
-			be32_to_cpus(&h->length);
-		}
-		if (h->oid != OID_INL_TUNNEL)
-			return h;
-		h++;
-	}
-	return NULL;
-}
-
-/*
- * Fill the receive queue for management frames with fresh buffers.
- */
-int
-islpci_mgmt_rx_fill(struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	isl38xx_control_block *cb =	/* volatile not needed */
-	    (isl38xx_control_block *) priv->control_block;
-	u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n");
-#endif
-
-	while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
-		u32 index = curr % ISL38XX_CB_MGMT_QSIZE;
-		struct islpci_membuf *buf = &priv->mgmt_rx[index];
-		isl38xx_fragment *frag = &cb->rx_data_mgmt[index];
-
-		if (buf->mem == NULL) {
-			buf->mem = kmalloc(MGMT_FRAME_SIZE, GFP_ATOMIC);
-			if (!buf->mem)
-				return -ENOMEM;
-			buf->size = MGMT_FRAME_SIZE;
-		}
-		if (buf->pci_addr == 0) {
-			buf->pci_addr = dma_map_single(&priv->pdev->dev,
-						       buf->mem,
-						       MGMT_FRAME_SIZE,
-						       DMA_FROM_DEVICE);
-			if (dma_mapping_error(&priv->pdev->dev, buf->pci_addr)) {
-				printk(KERN_WARNING
-				       "Failed to make memory DMA'able.\n");
-				return -ENOMEM;
-			}
-		}
-
-		/* be safe: always reset control block information */
-		frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
-		frag->flags = 0;
-		frag->address = cpu_to_le32(buf->pci_addr);
-		curr++;
-
-		/* The fragment address in the control block must have
-		 * been written before announcing the frame buffer to
-		 * device */
-		wmb();
-		cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = cpu_to_le32(curr);
-	}
-	return 0;
-}
-
-/*
- * Create and transmit a management frame using "operation" and "oid",
- * with arguments data/length.
- * We either return an error and free the frame, or we return 0 and
- * islpci_mgt_cleanup_transmit() frees the frame in the tx-done
- * interrupt.
- */
-static int
-islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
-		    void *data, int length)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	isl38xx_control_block *cb =
-	    (isl38xx_control_block *) priv->control_block;
-	void *p;
-	int err = -EINVAL;
-	unsigned long flags;
-	isl38xx_fragment *frag;
-	struct islpci_membuf buf;
-	u32 curr_frag;
-	int index;
-	int frag_len = length + PIMFOR_HEADER_SIZE;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_transmit\n");
-#endif
-
-	if (frag_len > MGMT_FRAME_SIZE) {
-		printk(KERN_DEBUG "%s: mgmt frame too large %d\n",
-		       ndev->name, frag_len);
-		goto error;
-	}
-
-	err = -ENOMEM;
-	p = buf.mem = kmalloc(frag_len, GFP_KERNEL);
-	if (!buf.mem)
-		goto error;
-
-	buf.size = frag_len;
-
-	/* create the header directly in the fragment data area */
-	pimfor_encode_header(operation, oid, length, (pimfor_header_t *) p);
-	p += PIMFOR_HEADER_SIZE;
-
-	if (data)
-		memcpy(p, data, length);
-	else
-		memset(p, 0, length);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	{
-		pimfor_header_t *h = buf.mem;
-		DEBUG(SHOW_PIMFOR_FRAMES,
-		      "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n",
-		      h->operation, oid, h->device_id, h->flags, length);
-
-		/* display the buffer contents for debugging */
-		display_buffer((char *) h, sizeof (pimfor_header_t));
-		display_buffer(p, length);
-	}
-#endif
-
-	err = -ENOMEM;
-	buf.pci_addr = dma_map_single(&priv->pdev->dev, buf.mem, frag_len,
-				      DMA_TO_DEVICE);
-	if (dma_mapping_error(&priv->pdev->dev, buf.pci_addr)) {
-		printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n",
-		       ndev->name);
-		goto error_free;
-	}
-
-	/* Protect the control block modifications against interrupts. */
-	spin_lock_irqsave(&priv->slock, flags);
-	curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ]);
-	if (curr_frag - priv->index_mgmt_tx >= ISL38XX_CB_MGMT_QSIZE) {
-		printk(KERN_WARNING "%s: mgmt tx queue is still full\n",
-		       ndev->name);
-		goto error_unlock;
-	}
-
-	/* commit the frame to the tx device queue */
-	index = curr_frag % ISL38XX_CB_MGMT_QSIZE;
-	priv->mgmt_tx[index] = buf;
-	frag = &cb->tx_data_mgmt[index];
-	frag->size = cpu_to_le16(frag_len);
-	frag->flags = 0;	/* for any other than the last fragment, set to 1 */
-	frag->address = cpu_to_le32(buf.pci_addr);
-
-	/* The fragment address in the control block must have
-	 * been written before announcing the frame buffer to
-	 * device */
-	wmb();
-	cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ] = cpu_to_le32(curr_frag + 1);
-	spin_unlock_irqrestore(&priv->slock, flags);
-
-	/* trigger the device */
-	islpci_trigger(priv);
-	return 0;
-
-      error_unlock:
-	spin_unlock_irqrestore(&priv->slock, flags);
-      error_free:
-	kfree(buf.mem);
-      error:
-	return err;
-}
-
-/*
- * Receive a management frame from the device.
- * This can be an arbitrary number of traps, and at most one response
- * frame for a previous request sent via islpci_mgt_transmit().
- */
-int
-islpci_mgt_receive(struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	isl38xx_control_block *cb =
-	    (isl38xx_control_block *) priv->control_block;
-	u32 curr_frag;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n");
-#endif
-
-	/* Only once per interrupt, determine fragment range to
-	 * process.  This avoids an endless loop (i.e. lockup) if
-	 * frames come in faster than we can process them. */
-	curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_RX_MGMTQ]);
-	barrier();
-
-	for (; priv->index_mgmt_rx < curr_frag; priv->index_mgmt_rx++) {
-		pimfor_header_t *header;
-		u32 index = priv->index_mgmt_rx % ISL38XX_CB_MGMT_QSIZE;
-		struct islpci_membuf *buf = &priv->mgmt_rx[index];
-		u16 frag_len;
-		int size;
-		struct islpci_mgmtframe *frame;
-
-		/* I have no idea (and no documentation) if flags != 0
-		 * is possible.  Drop the frame, reuse the buffer. */
-		if (le16_to_cpu(cb->rx_data_mgmt[index].flags) != 0) {
-			printk(KERN_WARNING "%s: unknown flags 0x%04x\n",
-			       ndev->name,
-			       le16_to_cpu(cb->rx_data_mgmt[index].flags));
-			continue;
-		}
-
-		/* The device only returns the size of the header(s) here. */
-		frag_len = le16_to_cpu(cb->rx_data_mgmt[index].size);
-
-		/*
-		 * We appear to have no way to tell the device the
-		 * size of a receive buffer.  Thus, if this check
-		 * triggers, we likely have kernel heap corruption. */
-		if (frag_len > MGMT_FRAME_SIZE) {
-			printk(KERN_WARNING
-				"%s: Bogus packet size of %d (%#x).\n",
-				ndev->name, frag_len, frag_len);
-			frag_len = MGMT_FRAME_SIZE;
-		}
-
-		/* Ensure the results of device DMA are visible to the CPU. */
-		dma_sync_single_for_cpu(&priv->pdev->dev, buf->pci_addr,
-					buf->size, DMA_FROM_DEVICE);
-
-		/* Perform endianess conversion for PIMFOR header in-place. */
-		header = pimfor_decode_header(buf->mem, frag_len);
-		if (!header) {
-			printk(KERN_WARNING "%s: no PIMFOR header found\n",
-			       ndev->name);
-			continue;
-		}
-
-		/* The device ID from the PIMFOR packet received from
-		 * the MVC is always 0.  We forward a sensible device_id.
-		 * Not that anyone upstream would care... */
-		header->device_id = priv->ndev->ifindex;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_PIMFOR_FRAMES,
-		      "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n",
-		      header->operation, header->oid, header->device_id,
-		      header->flags, header->length);
-
-		/* display the buffer contents for debugging */
-		display_buffer((char *) header, PIMFOR_HEADER_SIZE);
-		display_buffer((char *) header + PIMFOR_HEADER_SIZE,
-			       header->length);
-#endif
-
-		/* nobody sends these */
-		if (header->flags & PIMFOR_FLAG_APPLIC_ORIGIN) {
-			printk(KERN_DEBUG
-			       "%s: errant PIMFOR application frame\n",
-			       ndev->name);
-			continue;
-		}
-
-		/* Determine frame size, skipping OID_INL_TUNNEL headers. */
-		size = PIMFOR_HEADER_SIZE + header->length;
-		frame = kmalloc(sizeof(struct islpci_mgmtframe) + size,
-				GFP_ATOMIC);
-		if (!frame)
-			continue;
-
-		frame->ndev = ndev;
-		memcpy(&frame->buf, header, size);
-		frame->header = (pimfor_header_t *) frame->buf;
-		frame->data = frame->buf + PIMFOR_HEADER_SIZE;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-		DEBUG(SHOW_PIMFOR_FRAMES,
-		      "frame: header: %p, data: %p, size: %d\n",
-		      frame->header, frame->data, size);
-#endif
-
-		if (header->operation == PIMFOR_OP_TRAP) {
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			printk(KERN_DEBUG
-			       "TRAP: oid 0x%x, device %i, flags 0x%x length %i\n",
-			       header->oid, header->device_id, header->flags,
-			       header->length);
-#endif
-
-			/* Create work to handle trap out of interrupt
-			 * context. */
-			INIT_WORK(&frame->ws, prism54_process_trap);
-			schedule_work(&frame->ws);
-
-		} else {
-			/* Signal the one waiting process that a response
-			 * has been received. */
-			if ((frame = xchg(&priv->mgmt_received, frame)) != NULL) {
-				printk(KERN_WARNING
-				       "%s: mgmt response not collected\n",
-				       ndev->name);
-				kfree(frame);
-			}
-#if VERBOSE > SHOW_ERROR_MESSAGES
-			DEBUG(SHOW_TRACING, "Wake up Mgmt Queue\n");
-#endif
-			wake_up(&priv->mgmt_wqueue);
-		}
-
-	}
-
-	return 0;
-}
-
-/*
- * Cleanup the transmit queue by freeing all frames handled by the device.
- */
-void
-islpci_mgt_cleanup_transmit(struct net_device *ndev)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	isl38xx_control_block *cb =	/* volatile not needed */
-	    (isl38xx_control_block *) priv->control_block;
-	u32 curr_frag;
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
-	DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_cleanup_transmit\n");
-#endif
-
-	/* Only once per cleanup, determine fragment range to
-	 * process.  This avoids an endless loop (i.e. lockup) if
-	 * the device became confused, incrementing device_curr_frag
-	 * rapidly. */
-	curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_TX_MGMTQ]);
-	barrier();
-
-	for (; priv->index_mgmt_tx < curr_frag; priv->index_mgmt_tx++) {
-		int index = priv->index_mgmt_tx % ISL38XX_CB_MGMT_QSIZE;
-		struct islpci_membuf *buf = &priv->mgmt_tx[index];
-		dma_unmap_single(&priv->pdev->dev, buf->pci_addr, buf->size,
-				 DMA_TO_DEVICE);
-		buf->pci_addr = 0;
-		kfree(buf->mem);
-		buf->mem = NULL;
-		buf->size = 0;
-	}
-}
-
-/*
- * Perform one request-response transaction to the device.
- */
-int
-islpci_mgt_transaction(struct net_device *ndev,
-		       int operation, unsigned long oid,
-		       void *senddata, int sendlen,
-		       struct islpci_mgmtframe **recvframe)
-{
-	islpci_private *priv = netdev_priv(ndev);
-	const long wait_cycle_jiffies = msecs_to_jiffies(ISL38XX_WAIT_CYCLE * 10);
-	long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies;
-	int err;
-	DEFINE_WAIT(wait);
-
-	*recvframe = NULL;
-
-	if (mutex_lock_interruptible(&priv->mgmt_lock))
-		return -ERESTARTSYS;
-
-	prepare_to_wait(&priv->mgmt_wqueue, &wait, TASK_UNINTERRUPTIBLE);
-	err = islpci_mgt_transmit(ndev, operation, oid, senddata, sendlen);
-	if (err)
-		goto out;
-
-	err = -ETIMEDOUT;
-	while (timeout_left > 0) {
-		int timeleft;
-		struct islpci_mgmtframe *frame;
-
-		timeleft = schedule_timeout_uninterruptible(wait_cycle_jiffies);
-		frame = xchg(&priv->mgmt_received, NULL);
-		if (frame) {
-			if (frame->header->oid == oid) {
-				*recvframe = frame;
-				err = 0;
-				goto out;
-			} else {
-				printk(KERN_DEBUG
-				       "%s: expecting oid 0x%x, received 0x%x.\n",
-				       ndev->name, (unsigned int) oid,
-				       frame->header->oid);
-				kfree(frame);
-				frame = NULL;
-			}
-		}
-		if (timeleft == 0) {
-			printk(KERN_DEBUG
-				"%s: timeout waiting for mgmt response %lu, "
-				"triggering device\n",
-				ndev->name, timeout_left);
-			islpci_trigger(priv);
-		}
-		timeout_left += timeleft - wait_cycle_jiffies;
-	}
-	printk(KERN_WARNING "%s: timeout waiting for mgmt response\n",
-	       ndev->name);
-
-	/* TODO: we should reset the device here */
- out:
-	finish_wait(&priv->mgmt_wqueue, &wait);
-	mutex_unlock(&priv->mgmt_lock);
-	return err;
-}
-
diff --git a/drivers/net/wireless/intersil/prism54/islpci_mgt.h b/drivers/net/wireless/intersil/prism54/islpci_mgt.h
deleted file mode 100644
index 1f87d0aea60c..000000000000
--- a/drivers/net/wireless/intersil/prism54/islpci_mgt.h
+++ /dev/null
@@ -1,126 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2002 Intersil Americas Inc.
- *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
- */
-
-#ifndef _ISLPCI_MGT_H
-#define _ISLPCI_MGT_H
-
-#include <linux/wireless.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-
-/*
- *  Function definitions
- */
-
-#define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0)
-#define DEBUG(f, args...) K_DEBUG(f, pc_debug, args)
-
-extern int pc_debug;
-#define init_wds 0	/* help compiler optimize away dead code */
-
-
-/* General driver definitions */
-#define PCIDEVICE_LATENCY_TIMER_MIN		0x40
-#define PCIDEVICE_LATENCY_TIMER_VAL		0x50
-
-/* Debugging verbose definitions */
-#define SHOW_NOTHING                            0x00	/* overrules everything */
-#define SHOW_ANYTHING                           0xFF
-#define SHOW_ERROR_MESSAGES                     0x01
-#define SHOW_TRAPS                              0x02
-#define SHOW_FUNCTION_CALLS                     0x04
-#define SHOW_TRACING                            0x08
-#define SHOW_QUEUE_INDEXES                      0x10
-#define SHOW_PIMFOR_FRAMES                      0x20
-#define SHOW_BUFFER_CONTENTS                    0x40
-#define VERBOSE                                 0x01
-
-/* Default card definitions */
-#define CARD_DEFAULT_CHANNEL                    6
-#define CARD_DEFAULT_MODE                       INL_MODE_CLIENT
-#define CARD_DEFAULT_IW_MODE			IW_MODE_INFRA
-#define CARD_DEFAULT_BSSTYPE                    DOT11_BSSTYPE_INFRA
-#define CARD_DEFAULT_CLIENT_SSID		""
-#define CARD_DEFAULT_AP_SSID			"default"
-#define CARD_DEFAULT_KEY1                       "default_key_1"
-#define CARD_DEFAULT_KEY2                       "default_key_2"
-#define CARD_DEFAULT_KEY3                       "default_key_3"
-#define CARD_DEFAULT_KEY4                       "default_key_4"
-#define CARD_DEFAULT_WEP                        0
-#define CARD_DEFAULT_FILTER                     0
-#define CARD_DEFAULT_WDS                        0
-#define	CARD_DEFAULT_AUTHEN                     DOT11_AUTH_OS
-#define	CARD_DEFAULT_DOT1X			0
-#define CARD_DEFAULT_MLME_MODE			DOT11_MLME_AUTO
-#define CARD_DEFAULT_CONFORMANCE                OID_INL_CONFORMANCE_NONE
-#define CARD_DEFAULT_PROFILE			DOT11_PROFILE_MIXED_G_WIFI
-#define CARD_DEFAULT_MAXFRAMEBURST		DOT11_MAXFRAMEBURST_MIXED_SAFE
-
-/* PIMFOR package definitions */
-#define PIMFOR_ETHERTYPE                        0x8828
-#define PIMFOR_HEADER_SIZE                      12
-#define PIMFOR_VERSION                          1
-#define PIMFOR_OP_GET                           0
-#define PIMFOR_OP_SET                           1
-#define PIMFOR_OP_RESPONSE                      2
-#define PIMFOR_OP_ERROR                         3
-#define PIMFOR_OP_TRAP                          4
-#define PIMFOR_OP_RESERVED                      5	/* till 255 */
-#define PIMFOR_DEV_ID_MHLI_MIB                  0
-#define PIMFOR_FLAG_APPLIC_ORIGIN               0x01
-#define PIMFOR_FLAG_LITTLE_ENDIAN               0x02
-
-void display_buffer(char *, int);
-
-/*
- *  Type definition section
- *
- *  the structure defines only the header allowing copyless
- *  frame handling
- */
-typedef struct {
-	u8 version;
-	u8 operation;
-	u32 oid;
-	u8 device_id;
-	u8 flags;
-	u32 length;
-} __packed
-pimfor_header_t;
-
-/* A received and interrupt-processed management frame, either for
- * schedule_work(prism54_process_trap) or for priv->mgmt_received,
- * processed by islpci_mgt_transaction(). */
-struct islpci_mgmtframe {
-	struct net_device *ndev;      /* pointer to network device */
-	pimfor_header_t *header;      /* payload header, points into buf */
-	void *data;		      /* payload ex header, points into buf */
-        struct work_struct ws;	      /* argument for schedule_work() */
-	char buf[];		      /* fragment buffer */
-};
-
-int
-islpci_mgt_receive(struct net_device *ndev);
-
-int
-islpci_mgmt_rx_fill(struct net_device *ndev);
-
-void
-islpci_mgt_cleanup_transmit(struct net_device *ndev);
-
-int
-islpci_mgt_transaction(struct net_device *ndev,
-                       int operation, unsigned long oid,
-		       void *senddata, int sendlen,
-		       struct islpci_mgmtframe **recvframe);
-
-static inline void
-islpci_mgt_release(struct islpci_mgmtframe *frame)
-{
-        kfree(frame);
-}
-
-#endif				/* _ISLPCI_MGT_H */
diff --git a/drivers/net/wireless/intersil/prism54/oid_mgt.c b/drivers/net/wireless/intersil/prism54/oid_mgt.c
deleted file mode 100644
index 9fd307ca4b6d..000000000000
--- a/drivers/net/wireless/intersil/prism54/oid_mgt.c
+++ /dev/null
@@ -1,889 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2003,2004 Aurelien Alleaume <slts@free.fr>
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include "prismcompat.h"
-#include "islpci_dev.h"
-#include "islpci_mgt.h"
-#include "isl_oid.h"
-#include "oid_mgt.h"
-#include "isl_ioctl.h"
-
-/* to convert between channel and freq */
-static const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432,
-	2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-
-int
-channel_of_freq(int f)
-{
-	int c = 0;
-
-	if ((f >= 2412) && (f <= 2484)) {
-		while ((c < 14) && (f != frequency_list_bg[c]))
-			c++;
-		return (c >= 14) ? 0 : ++c;
-	} else if ((f >= (int) 5000) && (f <= (int) 6000)) {
-		return ( (f - 5000) / 5 );
-	} else
-		return 0;
-}
-
-#define OID_STRUCT(name,oid,s,t) [name] = {oid, 0, sizeof(s), t}
-#define OID_STRUCT_C(name,oid,s,t) OID_STRUCT(name,oid,s,t | OID_FLAG_CACHED)
-#define OID_U32(name,oid) OID_STRUCT(name,oid,u32,OID_TYPE_U32)
-#define OID_U32_C(name,oid) OID_STRUCT_C(name,oid,u32,OID_TYPE_U32)
-#define OID_STRUCT_MLME(name,oid) OID_STRUCT(name,oid,struct obj_mlme,OID_TYPE_MLME)
-#define OID_STRUCT_MLMEEX(name,oid) OID_STRUCT(name,oid,struct obj_mlmeex,OID_TYPE_MLMEEX)
-
-#define OID_UNKNOWN(name,oid) OID_STRUCT(name,oid,0,0)
-
-struct oid_t isl_oid[] = {
-	OID_STRUCT(GEN_OID_MACADDRESS, 0x00000000, u8[6], OID_TYPE_ADDR),
-	OID_U32(GEN_OID_LINKSTATE, 0x00000001),
-	OID_UNKNOWN(GEN_OID_WATCHDOG, 0x00000002),
-	OID_UNKNOWN(GEN_OID_MIBOP, 0x00000003),
-	OID_UNKNOWN(GEN_OID_OPTIONS, 0x00000004),
-	OID_UNKNOWN(GEN_OID_LEDCONFIG, 0x00000005),
-
-	/* 802.11 */
-	OID_U32_C(DOT11_OID_BSSTYPE, 0x10000000),
-	OID_STRUCT_C(DOT11_OID_BSSID, 0x10000001, u8[6], OID_TYPE_RAW),
-	OID_STRUCT_C(DOT11_OID_SSID, 0x10000002, struct obj_ssid,
-		     OID_TYPE_SSID),
-	OID_U32(DOT11_OID_STATE, 0x10000003),
-	OID_U32(DOT11_OID_AID, 0x10000004),
-	OID_STRUCT(DOT11_OID_COUNTRYSTRING, 0x10000005, u8[4], OID_TYPE_RAW),
-	OID_STRUCT_C(DOT11_OID_SSIDOVERRIDE, 0x10000006, struct obj_ssid,
-		     OID_TYPE_SSID),
-
-	OID_U32(DOT11_OID_MEDIUMLIMIT, 0x11000000),
-	OID_U32_C(DOT11_OID_BEACONPERIOD, 0x11000001),
-	OID_U32(DOT11_OID_DTIMPERIOD, 0x11000002),
-	OID_U32(DOT11_OID_ATIMWINDOW, 0x11000003),
-	OID_U32(DOT11_OID_LISTENINTERVAL, 0x11000004),
-	OID_U32(DOT11_OID_CFPPERIOD, 0x11000005),
-	OID_U32(DOT11_OID_CFPDURATION, 0x11000006),
-
-	OID_U32_C(DOT11_OID_AUTHENABLE, 0x12000000),
-	OID_U32_C(DOT11_OID_PRIVACYINVOKED, 0x12000001),
-	OID_U32_C(DOT11_OID_EXUNENCRYPTED, 0x12000002),
-	OID_U32_C(DOT11_OID_DEFKEYID, 0x12000003),
-	[DOT11_OID_DEFKEYX] = {0x12000004, 3, sizeof (struct obj_key),
-			       OID_FLAG_CACHED | OID_TYPE_KEY},	/* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
-	OID_UNKNOWN(DOT11_OID_STAKEY, 0x12000008),
-	OID_U32(DOT11_OID_REKEYTHRESHOLD, 0x12000009),
-	OID_UNKNOWN(DOT11_OID_STASC, 0x1200000a),
-
-	OID_U32(DOT11_OID_PRIVTXREJECTED, 0x1a000000),
-	OID_U32(DOT11_OID_PRIVRXPLAIN, 0x1a000001),
-	OID_U32(DOT11_OID_PRIVRXFAILED, 0x1a000002),
-	OID_U32(DOT11_OID_PRIVRXNOKEY, 0x1a000003),
-
-	OID_U32_C(DOT11_OID_RTSTHRESH, 0x13000000),
-	OID_U32_C(DOT11_OID_FRAGTHRESH, 0x13000001),
-	OID_U32_C(DOT11_OID_SHORTRETRIES, 0x13000002),
-	OID_U32_C(DOT11_OID_LONGRETRIES, 0x13000003),
-	OID_U32_C(DOT11_OID_MAXTXLIFETIME, 0x13000004),
-	OID_U32(DOT11_OID_MAXRXLIFETIME, 0x13000005),
-	OID_U32(DOT11_OID_AUTHRESPTIMEOUT, 0x13000006),
-	OID_U32(DOT11_OID_ASSOCRESPTIMEOUT, 0x13000007),
-
-	OID_UNKNOWN(DOT11_OID_ALOFT_TABLE, 0x1d000000),
-	OID_UNKNOWN(DOT11_OID_ALOFT_CTRL_TABLE, 0x1d000001),
-	OID_UNKNOWN(DOT11_OID_ALOFT_RETREAT, 0x1d000002),
-	OID_UNKNOWN(DOT11_OID_ALOFT_PROGRESS, 0x1d000003),
-	OID_U32(DOT11_OID_ALOFT_FIXEDRATE, 0x1d000004),
-	OID_UNKNOWN(DOT11_OID_ALOFT_RSSIGRAPH, 0x1d000005),
-	OID_UNKNOWN(DOT11_OID_ALOFT_CONFIG, 0x1d000006),
-
-	[DOT11_OID_VDCFX] = {0x1b000000, 7, 0, 0},
-	OID_U32(DOT11_OID_MAXFRAMEBURST, 0x1b000008),
-
-	OID_U32(DOT11_OID_PSM, 0x14000000),
-	OID_U32(DOT11_OID_CAMTIMEOUT, 0x14000001),
-	OID_U32(DOT11_OID_RECEIVEDTIMS, 0x14000002),
-	OID_U32(DOT11_OID_ROAMPREFERENCE, 0x14000003),
-
-	OID_U32(DOT11_OID_BRIDGELOCAL, 0x15000000),
-	OID_U32(DOT11_OID_CLIENTS, 0x15000001),
-	OID_U32(DOT11_OID_CLIENTSASSOCIATED, 0x15000002),
-	[DOT11_OID_CLIENTX] = {0x15000003, 2006, 0, 0},	/* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
-
-	OID_STRUCT(DOT11_OID_CLIENTFIND, 0x150007DB, u8[6], OID_TYPE_ADDR),
-	OID_STRUCT(DOT11_OID_WDSLINKADD, 0x150007DC, u8[6], OID_TYPE_ADDR),
-	OID_STRUCT(DOT11_OID_WDSLINKREMOVE, 0x150007DD, u8[6], OID_TYPE_ADDR),
-	OID_STRUCT(DOT11_OID_EAPAUTHSTA, 0x150007DE, u8[6], OID_TYPE_ADDR),
-	OID_STRUCT(DOT11_OID_EAPUNAUTHSTA, 0x150007DF, u8[6], OID_TYPE_ADDR),
-	OID_U32_C(DOT11_OID_DOT1XENABLE, 0x150007E0),
-	OID_UNKNOWN(DOT11_OID_MICFAILURE, 0x150007E1),
-	OID_UNKNOWN(DOT11_OID_REKEYINDICATE, 0x150007E2),
-
-	OID_U32(DOT11_OID_MPDUTXSUCCESSFUL, 0x16000000),
-	OID_U32(DOT11_OID_MPDUTXONERETRY, 0x16000001),
-	OID_U32(DOT11_OID_MPDUTXMULTIPLERETRIES, 0x16000002),
-	OID_U32(DOT11_OID_MPDUTXFAILED, 0x16000003),
-	OID_U32(DOT11_OID_MPDURXSUCCESSFUL, 0x16000004),
-	OID_U32(DOT11_OID_MPDURXDUPS, 0x16000005),
-	OID_U32(DOT11_OID_RTSSUCCESSFUL, 0x16000006),
-	OID_U32(DOT11_OID_RTSFAILED, 0x16000007),
-	OID_U32(DOT11_OID_ACKFAILED, 0x16000008),
-	OID_U32(DOT11_OID_FRAMERECEIVES, 0x16000009),
-	OID_U32(DOT11_OID_FRAMEERRORS, 0x1600000A),
-	OID_U32(DOT11_OID_FRAMEABORTS, 0x1600000B),
-	OID_U32(DOT11_OID_FRAMEABORTSPHY, 0x1600000C),
-
-	OID_U32(DOT11_OID_SLOTTIME, 0x17000000),
-	OID_U32(DOT11_OID_CWMIN, 0x17000001),
-	OID_U32(DOT11_OID_CWMAX, 0x17000002),
-	OID_U32(DOT11_OID_ACKWINDOW, 0x17000003),
-	OID_U32(DOT11_OID_ANTENNARX, 0x17000004),
-	OID_U32(DOT11_OID_ANTENNATX, 0x17000005),
-	OID_U32(DOT11_OID_ANTENNADIVERSITY, 0x17000006),
-	OID_U32_C(DOT11_OID_CHANNEL, 0x17000007),
-	OID_U32_C(DOT11_OID_EDTHRESHOLD, 0x17000008),
-	OID_U32(DOT11_OID_PREAMBLESETTINGS, 0x17000009),
-	OID_STRUCT(DOT11_OID_RATES, 0x1700000A, u8[IWMAX_BITRATES + 1],
-		   OID_TYPE_RAW),
-	OID_U32(DOT11_OID_CCAMODESUPPORTED, 0x1700000B),
-	OID_U32(DOT11_OID_CCAMODE, 0x1700000C),
-	OID_UNKNOWN(DOT11_OID_RSSIVECTOR, 0x1700000D),
-	OID_UNKNOWN(DOT11_OID_OUTPUTPOWERTABLE, 0x1700000E),
-	OID_U32(DOT11_OID_OUTPUTPOWER, 0x1700000F),
-	OID_STRUCT(DOT11_OID_SUPPORTEDRATES, 0x17000010,
-		   u8[IWMAX_BITRATES + 1], OID_TYPE_RAW),
-	OID_U32_C(DOT11_OID_FREQUENCY, 0x17000011),
-	[DOT11_OID_SUPPORTEDFREQUENCIES] =
-	    {0x17000012, 0, sizeof (struct obj_frequencies)
-	     + sizeof (u16) * IWMAX_FREQ, OID_TYPE_FREQUENCIES},
-
-	OID_U32(DOT11_OID_NOISEFLOOR, 0x17000013),
-	OID_STRUCT(DOT11_OID_FREQUENCYACTIVITY, 0x17000014, u8[IWMAX_FREQ + 1],
-		   OID_TYPE_RAW),
-	OID_UNKNOWN(DOT11_OID_IQCALIBRATIONTABLE, 0x17000015),
-	OID_U32(DOT11_OID_NONERPPROTECTION, 0x17000016),
-	OID_U32(DOT11_OID_SLOTSETTINGS, 0x17000017),
-	OID_U32(DOT11_OID_NONERPTIMEOUT, 0x17000018),
-	OID_U32(DOT11_OID_PROFILES, 0x17000019),
-	OID_STRUCT(DOT11_OID_EXTENDEDRATES, 0x17000020,
-		   u8[IWMAX_BITRATES + 1], OID_TYPE_RAW),
-
-	OID_STRUCT_MLME(DOT11_OID_DEAUTHENTICATE, 0x18000000),
-	OID_STRUCT_MLME(DOT11_OID_AUTHENTICATE, 0x18000001),
-	OID_STRUCT_MLME(DOT11_OID_DISASSOCIATE, 0x18000002),
-	OID_STRUCT_MLME(DOT11_OID_ASSOCIATE, 0x18000003),
-	OID_UNKNOWN(DOT11_OID_SCAN, 0x18000004),
-	OID_STRUCT_MLMEEX(DOT11_OID_BEACON, 0x18000005),
-	OID_STRUCT_MLMEEX(DOT11_OID_PROBE, 0x18000006),
-	OID_STRUCT_MLMEEX(DOT11_OID_DEAUTHENTICATEEX, 0x18000007),
-	OID_STRUCT_MLMEEX(DOT11_OID_AUTHENTICATEEX, 0x18000008),
-	OID_STRUCT_MLMEEX(DOT11_OID_DISASSOCIATEEX, 0x18000009),
-	OID_STRUCT_MLMEEX(DOT11_OID_ASSOCIATEEX, 0x1800000A),
-	OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATE, 0x1800000B),
-	OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATEEX, 0x1800000C),
-
-	OID_U32(DOT11_OID_NONERPSTATUS, 0x1E000000),
-
-	OID_U32(DOT11_OID_STATIMEOUT, 0x19000000),
-	OID_U32_C(DOT11_OID_MLMEAUTOLEVEL, 0x19000001),
-	OID_U32(DOT11_OID_BSSTIMEOUT, 0x19000002),
-	[DOT11_OID_ATTACHMENT] = {0x19000003, 0,
-		sizeof(struct obj_attachment), OID_TYPE_ATTACH},
-	OID_STRUCT_C(DOT11_OID_PSMBUFFER, 0x19000004, struct obj_buffer,
-		     OID_TYPE_BUFFER),
-
-	OID_U32(DOT11_OID_BSSS, 0x1C000000),
-	[DOT11_OID_BSSX] = {0x1C000001, 63, sizeof (struct obj_bss),
-			    OID_TYPE_BSS},	/*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
-	OID_STRUCT(DOT11_OID_BSSFIND, 0x1C000042, struct obj_bss, OID_TYPE_BSS),
-	[DOT11_OID_BSSLIST] = {0x1C000043, 0, sizeof (struct
-						      obj_bsslist) +
-			       sizeof (struct obj_bss[IWMAX_BSS]),
-			       OID_TYPE_BSSLIST},
-
-	OID_UNKNOWN(OID_INL_TUNNEL, 0xFF020000),
-	OID_UNKNOWN(OID_INL_MEMADDR, 0xFF020001),
-	OID_UNKNOWN(OID_INL_MEMORY, 0xFF020002),
-	OID_U32_C(OID_INL_MODE, 0xFF020003),
-	OID_UNKNOWN(OID_INL_COMPONENT_NR, 0xFF020004),
-	OID_STRUCT(OID_INL_VERSION, 0xFF020005, u8[8], OID_TYPE_RAW),
-	OID_UNKNOWN(OID_INL_INTERFACE_ID, 0xFF020006),
-	OID_UNKNOWN(OID_INL_COMPONENT_ID, 0xFF020007),
-	OID_U32_C(OID_INL_CONFIG, 0xFF020008),
-	OID_U32_C(OID_INL_DOT11D_CONFORMANCE, 0xFF02000C),
-	OID_U32(OID_INL_PHYCAPABILITIES, 0xFF02000D),
-	OID_U32_C(OID_INL_OUTPUTPOWER, 0xFF02000F),
-
-};
-
-int
-mgt_init(islpci_private *priv)
-{
-	int i;
-
-	priv->mib = kcalloc(OID_NUM_LAST, sizeof (void *), GFP_KERNEL);
-	if (!priv->mib)
-		return -ENOMEM;
-
-	/* Alloc the cache */
-	for (i = 0; i < OID_NUM_LAST; i++) {
-		if (isl_oid[i].flags & OID_FLAG_CACHED) {
-			priv->mib[i] = kcalloc(isl_oid[i].size,
-					       (isl_oid[i].range + 1),
-					       GFP_KERNEL);
-			if (!priv->mib[i])
-				return -ENOMEM;
-		} else
-			priv->mib[i] = NULL;
-	}
-
-	init_rwsem(&priv->mib_sem);
-	prism54_mib_init(priv);
-
-	return 0;
-}
-
-void
-mgt_clean(islpci_private *priv)
-{
-	int i;
-
-	if (!priv->mib)
-		return;
-	for (i = 0; i < OID_NUM_LAST; i++) {
-		kfree(priv->mib[i]);
-		priv->mib[i] = NULL;
-	}
-	kfree(priv->mib);
-	priv->mib = NULL;
-}
-
-void
-mgt_le_to_cpu(int type, void *data)
-{
-	switch (type) {
-	case OID_TYPE_U32:
-		*(u32 *) data = le32_to_cpu(*(u32 *) data);
-		break;
-	case OID_TYPE_BUFFER:{
-			struct obj_buffer *buff = data;
-			buff->size = le32_to_cpu(buff->size);
-			buff->addr = le32_to_cpu(buff->addr);
-			break;
-		}
-	case OID_TYPE_BSS:{
-			struct obj_bss *bss = data;
-			bss->age = le16_to_cpu(bss->age);
-			bss->channel = le16_to_cpu(bss->channel);
-			bss->capinfo = le16_to_cpu(bss->capinfo);
-			bss->rates = le16_to_cpu(bss->rates);
-			bss->basic_rates = le16_to_cpu(bss->basic_rates);
-			break;
-		}
-	case OID_TYPE_BSSLIST:{
-			struct obj_bsslist *list = data;
-			int i;
-			list->nr = le32_to_cpu(list->nr);
-			for (i = 0; i < list->nr; i++)
-				mgt_le_to_cpu(OID_TYPE_BSS, &list->bsslist[i]);
-			break;
-		}
-	case OID_TYPE_FREQUENCIES:{
-			struct obj_frequencies *freq = data;
-			int i;
-			freq->nr = le16_to_cpu(freq->nr);
-			for (i = 0; i < freq->nr; i++)
-				freq->mhz[i] = le16_to_cpu(freq->mhz[i]);
-			break;
-		}
-	case OID_TYPE_MLME:{
-			struct obj_mlme *mlme = data;
-			mlme->id = le16_to_cpu(mlme->id);
-			mlme->state = le16_to_cpu(mlme->state);
-			mlme->code = le16_to_cpu(mlme->code);
-			break;
-		}
-	case OID_TYPE_MLMEEX:{
-			struct obj_mlmeex *mlme = data;
-			mlme->id = le16_to_cpu(mlme->id);
-			mlme->state = le16_to_cpu(mlme->state);
-			mlme->code = le16_to_cpu(mlme->code);
-			mlme->size = le16_to_cpu(mlme->size);
-			break;
-		}
-	case OID_TYPE_ATTACH:{
-			struct obj_attachment *attach = data;
-			attach->id = le16_to_cpu(attach->id);
-			attach->size = le16_to_cpu(attach->size);
-			break;
-	}
-	case OID_TYPE_SSID:
-	case OID_TYPE_KEY:
-	case OID_TYPE_ADDR:
-	case OID_TYPE_RAW:
-		break;
-	default:
-		BUG();
-	}
-}
-
-static void
-mgt_cpu_to_le(int type, void *data)
-{
-	switch (type) {
-	case OID_TYPE_U32:
-		*(u32 *) data = cpu_to_le32(*(u32 *) data);
-		break;
-	case OID_TYPE_BUFFER:{
-			struct obj_buffer *buff = data;
-			buff->size = cpu_to_le32(buff->size);
-			buff->addr = cpu_to_le32(buff->addr);
-			break;
-		}
-	case OID_TYPE_BSS:{
-			struct obj_bss *bss = data;
-			bss->age = cpu_to_le16(bss->age);
-			bss->channel = cpu_to_le16(bss->channel);
-			bss->capinfo = cpu_to_le16(bss->capinfo);
-			bss->rates = cpu_to_le16(bss->rates);
-			bss->basic_rates = cpu_to_le16(bss->basic_rates);
-			break;
-		}
-	case OID_TYPE_BSSLIST:{
-			struct obj_bsslist *list = data;
-			int i;
-			list->nr = cpu_to_le32(list->nr);
-			for (i = 0; i < list->nr; i++)
-				mgt_cpu_to_le(OID_TYPE_BSS, &list->bsslist[i]);
-			break;
-		}
-	case OID_TYPE_FREQUENCIES:{
-			struct obj_frequencies *freq = data;
-			int i;
-			freq->nr = cpu_to_le16(freq->nr);
-			for (i = 0; i < freq->nr; i++)
-				freq->mhz[i] = cpu_to_le16(freq->mhz[i]);
-			break;
-		}
-	case OID_TYPE_MLME:{
-			struct obj_mlme *mlme = data;
-			mlme->id = cpu_to_le16(mlme->id);
-			mlme->state = cpu_to_le16(mlme->state);
-			mlme->code = cpu_to_le16(mlme->code);
-			break;
-		}
-	case OID_TYPE_MLMEEX:{
-			struct obj_mlmeex *mlme = data;
-			mlme->id = cpu_to_le16(mlme->id);
-			mlme->state = cpu_to_le16(mlme->state);
-			mlme->code = cpu_to_le16(mlme->code);
-			mlme->size = cpu_to_le16(mlme->size);
-			break;
-		}
-	case OID_TYPE_ATTACH:{
-			struct obj_attachment *attach = data;
-			attach->id = cpu_to_le16(attach->id);
-			attach->size = cpu_to_le16(attach->size);
-			break;
-	}
-	case OID_TYPE_SSID:
-	case OID_TYPE_KEY:
-	case OID_TYPE_ADDR:
-	case OID_TYPE_RAW:
-		break;
-	default:
-		BUG();
-	}
-}
-
-/* Note : data is modified during this function */
-
-int
-mgt_set_request(islpci_private *priv, enum oid_num_t n, int extra, void *data)
-{
-	int ret = 0;
-	struct islpci_mgmtframe *response = NULL;
-	int response_op = PIMFOR_OP_ERROR;
-	int dlen;
-	void *cache, *_data = data;
-	u32 oid;
-
-	BUG_ON(n >= OID_NUM_LAST);
-	BUG_ON(extra > isl_oid[n].range);
-
-	if (!priv->mib)
-		/* memory has been freed */
-		return -1;
-
-	dlen = isl_oid[n].size;
-	cache = priv->mib[n];
-	cache += (cache ? extra * dlen : 0);
-	oid = isl_oid[n].oid + extra;
-
-	if (_data == NULL)
-		/* we are requested to re-set a cached value */
-		_data = cache;
-	else
-		mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, _data);
-	/* If we are going to write to the cache, we don't want anyone to read
-	 * it -> acquire write lock.
-	 * Else we could acquire a read lock to be sure we don't bother the
-	 * commit process (which takes a write lock). But I'm not sure if it's
-	 * needed.
-	 */
-	if (cache)
-		down_write(&priv->mib_sem);
-
-	if (islpci_get_state(priv) >= PRV_STATE_READY) {
-		ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid,
-					     _data, dlen, &response);
-		if (!ret) {
-			response_op = response->header->operation;
-			islpci_mgt_release(response);
-		}
-		if (ret || response_op == PIMFOR_OP_ERROR)
-			ret = -EIO;
-	} else if (!cache)
-		ret = -EIO;
-
-	if (cache) {
-		if (!ret && data)
-			memcpy(cache, _data, dlen);
-		up_write(&priv->mib_sem);
-	}
-
-	/* re-set given data to what it was */
-	if (data)
-		mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data);
-
-	return ret;
-}
-
-/* None of these are cached */
-int
-mgt_set_varlen(islpci_private *priv, enum oid_num_t n, void *data, int extra_len)
-{
-	int ret = 0;
-	struct islpci_mgmtframe *response;
-	int response_op = PIMFOR_OP_ERROR;
-	int dlen;
-	u32 oid;
-
-	BUG_ON(n >= OID_NUM_LAST);
-
-	dlen = isl_oid[n].size;
-	oid = isl_oid[n].oid;
-
-	mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, data);
-
-	if (islpci_get_state(priv) >= PRV_STATE_READY) {
-		ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid,
-					     data, dlen + extra_len, &response);
-		if (!ret) {
-			response_op = response->header->operation;
-			islpci_mgt_release(response);
-		}
-		if (ret || response_op == PIMFOR_OP_ERROR)
-			ret = -EIO;
-	} else
-		ret = -EIO;
-
-	/* re-set given data to what it was */
-	if (data)
-		mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data);
-
-	return ret;
-}
-
-int
-mgt_get_request(islpci_private *priv, enum oid_num_t n, int extra, void *data,
-		union oid_res_t *res)
-{
-
-	int ret = -EIO;
-	int reslen = 0;
-	struct islpci_mgmtframe *response = NULL;
-
-	int dlen;
-	void *cache, *_res = NULL;
-	u32 oid;
-
-	BUG_ON(n >= OID_NUM_LAST);
-	BUG_ON(extra > isl_oid[n].range);
-
-	res->ptr = NULL;
-
-	if (!priv->mib)
-		/* memory has been freed */
-		return -1;
-
-	dlen = isl_oid[n].size;
-	cache = priv->mib[n];
-	cache += cache ? extra * dlen : 0;
-	oid = isl_oid[n].oid + extra;
-	reslen = dlen;
-
-	if (cache)
-		down_read(&priv->mib_sem);
-
-	if (islpci_get_state(priv) >= PRV_STATE_READY) {
-		ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
-					     oid, data, dlen, &response);
-		if (ret || !response ||
-		    response->header->operation == PIMFOR_OP_ERROR) {
-			if (response)
-				islpci_mgt_release(response);
-			ret = -EIO;
-		}
-		if (!ret) {
-			_res = response->data;
-			reslen = response->header->length;
-		}
-	} else if (cache) {
-		_res = cache;
-		ret = 0;
-	}
-	if ((isl_oid[n].flags & OID_FLAG_TYPE) == OID_TYPE_U32)
-		res->u = ret ? 0 : le32_to_cpu(*(u32 *) _res);
-	else {
-		res->ptr = kmalloc(reslen, GFP_KERNEL);
-		BUG_ON(res->ptr == NULL);
-		if (ret)
-			memset(res->ptr, 0, reslen);
-		else {
-			memcpy(res->ptr, _res, reslen);
-			mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE,
-				      res->ptr);
-		}
-	}
-	if (cache)
-		up_read(&priv->mib_sem);
-
-	if (response && !ret)
-		islpci_mgt_release(response);
-
-	if (reslen > isl_oid[n].size)
-		printk(KERN_DEBUG
-		       "mgt_get_request(0x%x): received data length was bigger "
-		       "than expected (%d > %d). Memory is probably corrupted...",
-		       oid, reslen, isl_oid[n].size);
-
-	return ret;
-}
-
-/* lock outside */
-int
-mgt_commit_list(islpci_private *priv, enum oid_num_t *l, int n)
-{
-	int i, ret = 0;
-	struct islpci_mgmtframe *response;
-
-	for (i = 0; i < n; i++) {
-		struct oid_t *t = &(isl_oid[l[i]]);
-		void *data = priv->mib[l[i]];
-		int j = 0;
-		u32 oid = t->oid;
-		BUG_ON(data == NULL);
-		while (j <= t->range) {
-			int r = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET,
-						      oid, data, t->size,
-						      &response);
-			if (response) {
-				r |= (response->header->operation == PIMFOR_OP_ERROR);
-				islpci_mgt_release(response);
-			}
-			if (r)
-				printk(KERN_ERR "%s: mgt_commit_list: failure. "
-					"oid=%08x err=%d\n",
-					priv->ndev->name, oid, r);
-			ret |= r;
-			j++;
-			oid++;
-			data += t->size;
-		}
-	}
-	return ret;
-}
-
-/* Lock outside */
-
-void
-mgt_set(islpci_private *priv, enum oid_num_t n, void *data)
-{
-	BUG_ON(n >= OID_NUM_LAST);
-	BUG_ON(priv->mib[n] == NULL);
-
-	memcpy(priv->mib[n], data, isl_oid[n].size);
-	mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, priv->mib[n]);
-}
-
-void
-mgt_get(islpci_private *priv, enum oid_num_t n, void *res)
-{
-	BUG_ON(n >= OID_NUM_LAST);
-	BUG_ON(priv->mib[n] == NULL);
-	BUG_ON(res == NULL);
-
-	memcpy(res, priv->mib[n], isl_oid[n].size);
-	mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, res);
-}
-
-/* Commits the cache. Lock outside. */
-
-static enum oid_num_t commit_part1[] = {
-	OID_INL_CONFIG,
-	OID_INL_MODE,
-	DOT11_OID_BSSTYPE,
-	DOT11_OID_CHANNEL,
-	DOT11_OID_MLMEAUTOLEVEL
-};
-
-static enum oid_num_t commit_part2[] = {
-	DOT11_OID_SSID,
-	DOT11_OID_PSMBUFFER,
-	DOT11_OID_AUTHENABLE,
-	DOT11_OID_PRIVACYINVOKED,
-	DOT11_OID_EXUNENCRYPTED,
-	DOT11_OID_DEFKEYX,	/* MULTIPLE */
-	DOT11_OID_DEFKEYID,
-	DOT11_OID_DOT1XENABLE,
-	OID_INL_DOT11D_CONFORMANCE,
-	/* Do not initialize this - fw < 1.0.4.3 rejects it
-	OID_INL_OUTPUTPOWER,
-	*/
-};
-
-/* update the MAC addr. */
-static int
-mgt_update_addr(islpci_private *priv)
-{
-	struct islpci_mgmtframe *res;
-	int ret;
-
-	ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
-				     isl_oid[GEN_OID_MACADDRESS].oid, NULL,
-				     isl_oid[GEN_OID_MACADDRESS].size, &res);
-
-	if ((ret == 0) && res && (res->header->operation != PIMFOR_OP_ERROR))
-		memcpy(priv->ndev->dev_addr, res->data, ETH_ALEN);
-	else
-		ret = -EIO;
-	if (res)
-		islpci_mgt_release(res);
-
-	if (ret)
-		printk(KERN_ERR "%s: mgt_update_addr: failure\n", priv->ndev->name);
-	return ret;
-}
-
-int
-mgt_commit(islpci_private *priv)
-{
-	int rvalue;
-	enum oid_num_t u;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return 0;
-
-	rvalue = mgt_commit_list(priv, commit_part1, ARRAY_SIZE(commit_part1));
-
-	if (priv->iw_mode != IW_MODE_MONITOR)
-		rvalue |= mgt_commit_list(priv, commit_part2, ARRAY_SIZE(commit_part2));
-
-	u = OID_INL_MODE;
-	rvalue |= mgt_commit_list(priv, &u, 1);
-	rvalue |= mgt_update_addr(priv);
-
-	if (rvalue) {
-		/* some request have failed. The device might be in an
-		   incoherent state. We should reset it ! */
-		printk(KERN_DEBUG "%s: mgt_commit: failure\n", priv->ndev->name);
-	}
-	return rvalue;
-}
-
-/* The following OIDs need to be "unlatched":
- *
- * MEDIUMLIMIT,BEACONPERIOD,DTIMPERIOD,ATIMWINDOW,LISTENINTERVAL
- * FREQUENCY,EXTENDEDRATES.
- *
- * The way to do this is to set ESSID. Note though that they may get
- * unlatch before though by setting another OID. */
-#if 0
-void
-mgt_unlatch_all(islpci_private *priv)
-{
-	u32 u;
-	int rvalue = 0;
-
-	if (islpci_get_state(priv) < PRV_STATE_INIT)
-		return;
-
-	u = DOT11_OID_SSID;
-	rvalue = mgt_commit_list(priv, &u, 1);
-	/* Necessary if in MANUAL RUN mode? */
-#if 0
-	u = OID_INL_MODE;
-	rvalue |= mgt_commit_list(priv, &u, 1);
-
-	u = DOT11_OID_MLMEAUTOLEVEL;
-	rvalue |= mgt_commit_list(priv, &u, 1);
-
-	u = OID_INL_MODE;
-	rvalue |= mgt_commit_list(priv, &u, 1);
-#endif
-
-	if (rvalue)
-		printk(KERN_DEBUG "%s: Unlatching OIDs failed\n", priv->ndev->name);
-}
-#endif
-
-/* This will tell you if you are allowed to answer a mlme(ex) request .*/
-
-int
-mgt_mlme_answer(islpci_private *priv)
-{
-	u32 mlmeautolevel;
-	/* Acquire a read lock because if we are in a mode change, it's
-	 * possible to answer true, while the card is leaving master to managed
-	 * mode. Answering to a mlme in this situation could hang the card.
-	 */
-	down_read(&priv->mib_sem);
-	mlmeautolevel =
-	    le32_to_cpu(*(u32 *) priv->mib[DOT11_OID_MLMEAUTOLEVEL]);
-	up_read(&priv->mib_sem);
-
-	return ((priv->iw_mode == IW_MODE_MASTER) &&
-		(mlmeautolevel >= DOT11_MLME_INTERMEDIATE));
-}
-
-enum oid_num_t
-mgt_oidtonum(u32 oid)
-{
-	int i;
-
-	for (i = 0; i < OID_NUM_LAST; i++)
-		if (isl_oid[i].oid == oid)
-			return i;
-
-	printk(KERN_DEBUG "looking for an unknown oid 0x%x", oid);
-
-	return OID_NUM_LAST;
-}
-
-int
-mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
-{
-	switch (isl_oid[n].flags & OID_FLAG_TYPE) {
-	case OID_TYPE_U32:
-		return scnprintf(str, PRIV_STR_SIZE, "%u\n", r->u);
-	case OID_TYPE_BUFFER:{
-			struct obj_buffer *buff = r->ptr;
-			return scnprintf(str, PRIV_STR_SIZE,
-					"size=%u\naddr=0x%X\n", buff->size,
-					buff->addr);
-		}
-		break;
-	case OID_TYPE_BSS:{
-			struct obj_bss *bss = r->ptr;
-			return scnprintf(str, PRIV_STR_SIZE,
-					"age=%u\nchannel=%u\n"
-					"capinfo=0x%X\nrates=0x%X\n"
-					"basic_rates=0x%X\n", bss->age,
-					bss->channel, bss->capinfo,
-					bss->rates, bss->basic_rates);
-		}
-		break;
-	case OID_TYPE_BSSLIST:{
-			struct obj_bsslist *list = r->ptr;
-			int i, k;
-			k = scnprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
-			for (i = 0; i < list->nr; i++)
-				k += scnprintf(str + k, PRIV_STR_SIZE - k,
-					      "bss[%u] :\nage=%u\nchannel=%u\n"
-					      "capinfo=0x%X\nrates=0x%X\n"
-					      "basic_rates=0x%X\n",
-					      i, list->bsslist[i].age,
-					      list->bsslist[i].channel,
-					      list->bsslist[i].capinfo,
-					      list->bsslist[i].rates,
-					      list->bsslist[i].basic_rates);
-			return k;
-		}
-		break;
-	case OID_TYPE_FREQUENCIES:{
-			struct obj_frequencies *freq = r->ptr;
-			int i, t;
-			printk("nr : %u\n", freq->nr);
-			t = scnprintf(str, PRIV_STR_SIZE, "nr=%u\n", freq->nr);
-			for (i = 0; i < freq->nr; i++)
-				t += scnprintf(str + t, PRIV_STR_SIZE - t,
-					      "mhz[%u]=%u\n", i, freq->mhz[i]);
-			return t;
-		}
-		break;
-	case OID_TYPE_MLME:{
-			struct obj_mlme *mlme = r->ptr;
-			return scnprintf(str, PRIV_STR_SIZE,
-					"id=0x%X\nstate=0x%X\ncode=0x%X\n",
-					mlme->id, mlme->state, mlme->code);
-		}
-		break;
-	case OID_TYPE_MLMEEX:{
-			struct obj_mlmeex *mlme = r->ptr;
-			return scnprintf(str, PRIV_STR_SIZE,
-					"id=0x%X\nstate=0x%X\n"
-					"code=0x%X\nsize=0x%X\n", mlme->id,
-					mlme->state, mlme->code, mlme->size);
-		}
-		break;
-	case OID_TYPE_ATTACH:{
-			struct obj_attachment *attach = r->ptr;
-			return scnprintf(str, PRIV_STR_SIZE,
-					"id=%d\nsize=%d\n",
-					attach->id,
-					attach->size);
-		}
-		break;
-	case OID_TYPE_SSID:{
-			struct obj_ssid *ssid = r->ptr;
-			return scnprintf(str, PRIV_STR_SIZE,
-					"length=%u\noctets=%.*s\n",
-					ssid->length, ssid->length,
-					ssid->octets);
-		}
-		break;
-	case OID_TYPE_KEY:{
-			struct obj_key *key = r->ptr;
-			int t, i;
-			t = scnprintf(str, PRIV_STR_SIZE,
-				     "type=0x%X\nlength=0x%X\nkey=0x",
-				     key->type, key->length);
-			for (i = 0; i < key->length; i++)
-				t += scnprintf(str + t, PRIV_STR_SIZE - t,
-					      "%02X:", key->key[i]);
-			t += scnprintf(str + t, PRIV_STR_SIZE - t, "\n");
-			return t;
-		}
-		break;
-	case OID_TYPE_RAW:
-	case OID_TYPE_ADDR:{
-			unsigned char *buff = r->ptr;
-			int t, i;
-			t = scnprintf(str, PRIV_STR_SIZE, "hex data=");
-			for (i = 0; i < isl_oid[n].size; i++)
-				t += scnprintf(str + t, PRIV_STR_SIZE - t,
-					      "%02X:", buff[i]);
-			t += scnprintf(str + t, PRIV_STR_SIZE - t, "\n");
-			return t;
-		}
-		break;
-	default:
-		BUG();
-	}
-	return 0;
-}
diff --git a/drivers/net/wireless/intersil/prism54/oid_mgt.h b/drivers/net/wireless/intersil/prism54/oid_mgt.h
deleted file mode 100644
index a7dc9e24c0bf..000000000000
--- a/drivers/net/wireless/intersil/prism54/oid_mgt.h
+++ /dev/null
@@ -1,46 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
- */
-
-#if !defined(_OID_MGT_H)
-#define _OID_MGT_H
-
-#include "isl_oid.h"
-#include "islpci_dev.h"
-
-extern struct oid_t isl_oid[];
-
-int mgt_init(islpci_private *);
-
-void mgt_clean(islpci_private *);
-
-/* I don't know where to put these 2 */
-extern const int frequency_list_a[];
-int channel_of_freq(int);
-
-void mgt_le_to_cpu(int, void *);
-
-int mgt_set_request(islpci_private *, enum oid_num_t, int, void *);
-int mgt_set_varlen(islpci_private *, enum oid_num_t, void *, int);
-
-
-int mgt_get_request(islpci_private *, enum oid_num_t, int, void *,
-		    union oid_res_t *);
-
-int mgt_commit_list(islpci_private *, enum oid_num_t *, int);
-
-void mgt_set(islpci_private *, enum oid_num_t, void *);
-
-void mgt_get(islpci_private *, enum oid_num_t, void *);
-
-int mgt_commit(islpci_private *);
-
-int mgt_mlme_answer(islpci_private *);
-
-enum oid_num_t mgt_oidtonum(u32 oid);
-
-int mgt_response_to_str(enum oid_num_t, union oid_res_t *, char *);
-
-#endif				/* !defined(_OID_MGT_H) */
-/* EOF */
diff --git a/drivers/net/wireless/intersil/prism54/prismcompat.h b/drivers/net/wireless/intersil/prism54/prismcompat.h
deleted file mode 100644
index c4489b66d07e..000000000000
--- a/drivers/net/wireless/intersil/prism54/prismcompat.h
+++ /dev/null
@@ -1,30 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  (C) 2004 Margit Schubert-While <margitsw@t-online.de>
- */
-
-/*
- *	Compatibility header file to aid support of different kernel versions
- */
-
-#ifdef PRISM54_COMPAT24
-#include "prismcompat24.h"
-#else	/* PRISM54_COMPAT24 */
-
-#ifndef _PRISM_COMPAT_H
-#define _PRISM_COMPAT_H
-
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/moduleparam.h>
-#include <linux/workqueue.h>
-#include <linux/compiler.h>
-
-#ifndef __iomem
-#define __iomem
-#endif
-
-#define PRISM_FW_PDEV		&priv->pdev->dev
-
-#endif				/* _PRISM_COMPAT_H */
-#endif				/* PRISM54_COMPAT24 */