| Message ID | 20210601174917.1979-4-tharvey@gateworks.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/4] arm64: dts: imx8mm-venice-gw700x: override thermal cfg for industrial temp | expand |
On Tue, Jun 1, 2021 at 10:49 AM Tim Harvey <tharvey@gateworks.com> wrote: > > Enable internal pull-down on UART transceiver GPIO config pins. > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts > index db43ee28bdb6..0216facb2aef 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts > @@ -877,9 +877,9 @@ > > pinctrl_uart3_gpio: uart3gpiogrp { > fsl,pins = < > - MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ > - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ > - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ > + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */ > + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */ > + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */ > >; > }; > > -- > 2.17.1 > Shawn, Is there anything you want changed here? Best regards, Tim
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index db43ee28bdb6..0216facb2aef 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -877,9 +877,9 @@ pinctrl_uart3_gpio: uart3gpiogrp { fsl,pins = < - MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ - MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000110 /* RS232# */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000110 /* RS422# */ + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000110 /* RS485# */ >; };
Enable internal pull-down on UART transceiver GPIO config pins. Signed-off-by: Tim Harvey <tharvey@gateworks.com> --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)