[V2] mmc: core: HS200 mode support for eMMC 4.5

This patch adds the support of the HS200 bus speed for
eMMC 4.5 devices.
The eMMC 4.5 devices have support for 200MHz bus speed.
The mmc core and host modules have been touched to add support
for this module.
It is necessary to know the card type in the sdhci.c file to
add support for eMMC tuning function. So card.h file is included
to import the card data structure.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
---
Changes in v1:
	Case statements in switch that produce same result have
	been combined to reduce repeated assignments.
	patch recreated after rebase to chris balls mmc-next branch.
Changes in v2:
	Rebased to latest chris-mmc/mmc-next branch. Resolved indentation
	problems identified in review. This patch has to be applied before
	the patch released for modifying the printk messages.

 drivers/mmc/core/bus.c    |    3 +-
 drivers/mmc/core/mmc.c    |   91 +++++++++++++++++++++++++++++++++++++++++----
 drivers/mmc/host/sdhci.c  |   36 +++++++++++++++---
 include/linux/mmc/card.h  |    3 +
 include/linux/mmc/host.h  |    8 ++++
 include/linux/mmc/mmc.h   |    8 +++-
 include/linux/mmc/sdhci.h |    1 +
 7 files changed, 134 insertions(+), 16 deletions(-)

Dear all,
 Since the member host->ext_caps is a duplicate of host->caps2 which
is already accepted in mainline by maintainer. I will resend my
patch by using the existing caps2 member of struct mmc_host .

regards
Girish K S

On 28 September 2011 10:30, Girish K S <girish.shivananjappa@linaro.org> wrote:
> This patch adds the support of the HS200 bus speed for
> eMMC 4.5 devices.
> The eMMC 4.5 devices have support for 200MHz bus speed.
> The mmc core and host modules have been touched to add support
> for this module.
> It is necessary to know the card type in the sdhci.c file to
> add support for eMMC tuning function. So card.h file is included
> to import the card data structure.
>
> Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
> ---
> Changes in v1:
>        Case statements in switch that produce same result have
>        been combined to reduce repeated assignments.
>        patch recreated after rebase to chris balls mmc-next branch.
> Changes in v2:
>        Rebased to latest chris-mmc/mmc-next branch. Resolved indentation
>        problems identified in review. This patch has to be applied before
>        the patch released for modifying the printk messages.
>
>  drivers/mmc/core/bus.c    |    3 +-
>  drivers/mmc/core/mmc.c    |   91 +++++++++++++++++++++++++++++++++++++++++----
>  drivers/mmc/host/sdhci.c  |   36 +++++++++++++++---
>  include/linux/mmc/card.h  |    3 +
>  include/linux/mmc/host.h  |    8 ++++
>  include/linux/mmc/mmc.h   |    8 +++-
>  include/linux/mmc/sdhci.h |    1 +
>  7 files changed, 134 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
> index 393d817..a0aa7ab 100644
> --- a/drivers/mmc/core/bus.c
> +++ b/drivers/mmc/core/bus.c
> @@ -301,10 +301,11 @@ int mmc_add_card(struct mmc_card *card)
>                        mmc_card_ddr_mode(card) ? "DDR " : "",
>                        type);
>        } else {
> -               printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
> +               printk(KERN_INFO "%s: new %s%s%s%s card at address %04x\n",
>                        mmc_hostname(card->host),
>                        mmc_sd_card_uhs(card) ? "ultra high speed " :
>                        (mmc_card_highspeed(card) ? "high speed " : ""),
> +                       (mmc_card_hs200(card) ? "HS200 " : ""),
>                        mmc_card_ddr_mode(card) ? "DDR " : "",
>                        type, card->rca);
>        }
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index c632b1f..382bf39 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -283,6 +283,39 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
>        }
>        card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
>        switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
> +       case EXT_CSD_CARD_TYPE_SDR_200 |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_200 | EXT_CSD_CARD_TYPE_DDR_1_8V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_200 | EXT_CSD_CARD_TYPE_DDR_1_2V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_200 | EXT_CSD_CARD_TYPE_DDR_52 |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +               card->ext_csd.hs_max_dtr = 200000000;
> +               card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
> +               break;
> +       case EXT_CSD_CARD_TYPE_SDR_1_2V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_1_2V | EXT_CSD_CARD_TYPE_DDR_1_8V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_1_2V | EXT_CSD_CARD_TYPE_DDR_1_2V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_1_2V | EXT_CSD_CARD_TYPE_DDR_52 |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +               card->ext_csd.hs_max_dtr = 200000000;
> +               card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
> +               break;
> +       case EXT_CSD_CARD_TYPE_SDR_1_8V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_1_8V | EXT_CSD_CARD_TYPE_DDR_1_8V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_1_8V | EXT_CSD_CARD_TYPE_DDR_1_2V |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +       case EXT_CSD_CARD_TYPE_SDR_1_8V | EXT_CSD_CARD_TYPE_DDR_52 |
> +            EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
> +               card->ext_csd.hs_max_dtr = 200000000;
> +               card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
> +               break;
>        case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
>             EXT_CSD_CARD_TYPE_26:
>                card->ext_csd.hs_max_dtr = 52000000;
> @@ -624,6 +657,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>  {
>        struct mmc_card *card;
>        int err, ddr = 0;
> +       int hs_sdr = 0;
>        u32 cid[4];
>        unsigned int max_dtr;
>        u32 rocr;
> @@ -797,10 +831,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>        /*
>         * Activate high speed (if supported)
>         */
> -       if ((card->ext_csd.hs_max_dtr != 0) &&
> -               (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
> -               err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> -                                EXT_CSD_HS_TIMING, 1, 0);
> +       if (card->ext_csd.hs_max_dtr != 0) {
> +               if ((card->ext_csd.hs_max_dtr > 52000000) &&
> +                   (host->ext_caps & MMC_CAP_HIGHSPEED_200))
> +                       err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> +                                        EXT_CSD_HS_TIMING, 2, 0);
> +               else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
> +                       err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> +                                        EXT_CSD_HS_TIMING, 1, 0);
> +
>                if (err && err != -EBADMSG)
>                        goto free_card;
>
> @@ -809,7 +848,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>                               mmc_hostname(card->host));
>                        err = 0;
>                } else {
> -                       mmc_card_set_highspeed(card);
> +                       if (card->ext_csd.hs_max_dtr > 52000000)
> +                               mmc_card_set_hs200(card);
> +                       else
> +                               mmc_card_set_highspeed(card);
>                        mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
>                }
>        }
> @@ -819,7 +861,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>         */
>        max_dtr = (unsigned int)-1;
>
> -       if (mmc_card_highspeed(card)) {
> +       if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
>                if (max_dtr > card->ext_csd.hs_max_dtr)
>                        max_dtr = card->ext_csd.hs_max_dtr;
>        } else if (max_dtr > card->csd.max_dtr) {
> @@ -845,6 +887,22 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>        }
>
>        /*
> +        * Indicate HS200 SDR mode (if supported).
> +        */
> +       if (mmc_card_hs200(card)) {
> +               if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V)
> +                       && ((host->ext_caps & (MMC_CAP_HS200_1_8V_SDR |
> +                            MMC_CAP_HS200))
> +                               == (MMC_CAP_HS200_1_8V_SDR | MMC_CAP_HS200)))
> +                               hs_sdr = MMC_1_8V_SDR_MODE;
> +               else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V)
> +                        && ((host->ext_caps & (MMC_CAP_HS200_1_2V_SDR |
> +                             MMC_CAP_HS200))
> +                               == (MMC_CAP_HS200_1_2V_SDR | MMC_CAP_HS200)))
> +                               hs_sdr = MMC_1_2V_SDR_MODE;
> +       }
> +
> +       /*
>         * Activate wide bus and DDR (if supported).
>         */
>        if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
> @@ -884,16 +942,24 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>                        if (!err) {
>                                mmc_set_bus_width(card->host, bus_width);
>
> +                               if ((host->ext_caps & MMC_CAP_HS200) &&
> +                                   card->host->ops->execute_tuning)
> +                                       err = card->host->ops-> \
> +                                             execute_tuning(card->host);
> +
>                                /*
>                                 * If controller can't handle bus width test,
>                                 * compare ext_csd previously read in 1 bit mode
>                                 * against ext_csd at new bus width
>                                 */
> -                               if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
> +                               if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST) &&
> +                                   !err)
>                                        err = mmc_compare_ext_csds(card,
>                                                bus_width);
> -                               else
> +                               else if (!err)
>                                        err = mmc_bus_test(card, bus_width);
> +                               else
> +                                       pr_warning("tuning execution failed\n");
>                                if (!err)
>                                        break;
>                        }
> @@ -942,6 +1008,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>                        mmc_card_set_ddr_mode(card);
>                        mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
>                        mmc_set_bus_width(card->host, bus_width);
> +               } else if (hs_sdr) {
> +                       if (hs_sdr == EXT_CSD_CARD_TYPE_SDR_1_2V) {
> +                               err = mmc_set_signal_voltage(host,
> +                                       MMC_SIGNAL_VOLTAGE_120, 0);
> +                               if (err)
> +                                       goto err;
> +                       }
> +                       mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
> +                       mmc_set_bus_width(card->host, bus_width);
>                }
>        }
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index d66a7a1..8582b5a 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -25,6 +25,7 @@
>
>  #include <linux/mmc/mmc.h>
>  #include <linux/mmc/host.h>
> +#include <linux/mmc/card.h>
>
>  #include "sdhci.h"
>
> @@ -993,7 +994,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>                flags |= SDHCI_CMD_INDEX;
>
>        /* CMD19 is special in that the Data Present Select should be set */
> -       if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK))
> +       if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK) ||
> +           (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))
>                flags |= SDHCI_CMD_DATA;
>
>        sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
> @@ -1623,10 +1625,13 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
>         * Host Controller needs tuning only in case of SDR104 mode
>         * and for SDR50 mode when Use Tuning for SDR50 is set in
>         * Capabilities register.
> +        * If the Host Controller supports the HS200 mode then tuning
> +        * function has to be executed.
>         */
>        if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) ||
>            (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) &&
> -           (host->flags & SDHCI_SDR50_NEEDS_TUNING)))
> +           (host->flags & SDHCI_SDR50_NEEDS_TUNING)) ||
> +           (host->flags & SDHCI_HS200_NEEDS_TUNING))
>                ctrl |= SDHCI_CTRL_EXEC_TUNING;
>        else {
>                spin_unlock(&host->lock);
> @@ -1661,7 +1666,10 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
>                if (!tuning_loop_counter && !timeout)
>                        break;
>
> -               cmd.opcode = MMC_SEND_TUNING_BLOCK;
> +               if (mmc->card->type == MMC_TYPE_MMC)
> +                       cmd.opcode = MMC_SEND_TUNING_BLOCK_HS200;
> +               else
> +                       cmd.opcode = MMC_SEND_TUNING_BLOCK;
>                cmd.arg = 0;
>                cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
>                cmd.retries = 0;
> @@ -1676,7 +1684,17 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
>                 * block to the Host Controller. So we set the block size
>                 * to 64 here.
>                 */
> -               sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), SDHCI_BLOCK_SIZE);
> +               if (mmc->card->type == MMC_TYPE_MMC) {
> +                       if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
> +                               sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
> +                                            SDHCI_BLOCK_SIZE);
> +                       else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
> +                               sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> +                                            SDHCI_BLOCK_SIZE);
> +               } else {
> +                       sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
> +                                    SDHCI_BLOCK_SIZE);
> +               }
>
>                /*
>                 * The tuning block is sent by the card to the host controller.
> @@ -2047,12 +2065,14 @@ static void sdhci_show_adma_error(struct sdhci_host *host) { }
>
>  static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  {
> +       u32 command;
>        BUG_ON(intmask == 0);
>
>        /* CMD19 generates _only_ Buffer Read Ready interrupt */
>        if (intmask & SDHCI_INT_DATA_AVAIL) {
> -               if (SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) ==
> -                   MMC_SEND_TUNING_BLOCK) {
> +               command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
> +               if ((command == MMC_SEND_TUNING_BLOCK) ||
> +                   (command == MMC_SEND_TUNING_BLOCK_HS200)) {
>                        host->tuning_done = 1;
>                        wake_up(&host->buf_ready_int);
>                        return;
> @@ -2567,6 +2587,10 @@ int sdhci_add_host(struct sdhci_host *host)
>        if (caps[1] & SDHCI_USE_SDR50_TUNING)
>                host->flags |= SDHCI_SDR50_NEEDS_TUNING;
>
> +       /* Does the host needs tuning for HS200? */
> +       if (mmc->ext_caps & MMC_CAP_HS200)
> +               host->flags |= SDHCI_HS200_NEEDS_TUNING;
> +
>        /* Driver Type(s) (A, C, D) supported by the host */
>        if (caps[1] & SDHCI_DRIVER_TYPE_A)
>                mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 5294ddf..15e5ce2 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -178,6 +178,7 @@ struct mmc_card {
>  #define MMC_STATE_HIGHSPEED_DDR (1<<4)         /* card is in high speed mode */
>  #define MMC_STATE_ULTRAHIGHSPEED (1<<5)                /* card is in ultra high speed mode */
>  #define MMC_CARD_SDXC          (1<<6)          /* card is SDXC */
> +#define MMC_STATE_HIGHSPEED_200        (1<<7)          /* card is in HS200 mode */
>        unsigned int            quirks;         /* card quirks */
>  #define MMC_QUIRK_LENIENT_FN0  (1<<0)          /* allow SDIO FN0 writes outside of the VS CCCR range */
>  #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)   /* use func->cur_blksize */
> @@ -313,6 +314,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
>  #define mmc_card_present(c)    ((c)->state & MMC_STATE_PRESENT)
>  #define mmc_card_readonly(c)   ((c)->state & MMC_STATE_READONLY)
>  #define mmc_card_highspeed(c)  ((c)->state & MMC_STATE_HIGHSPEED)
> +#define mmc_card_hs200(c)      ((c)->state & MMC_STATE_HIGHSPEED_200)
>  #define mmc_card_blockaddr(c)  ((c)->state & MMC_STATE_BLOCKADDR)
>  #define mmc_card_ddr_mode(c)   ((c)->state & MMC_STATE_HIGHSPEED_DDR)
>  #define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
> @@ -321,6 +323,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
>  #define mmc_card_set_present(c)        ((c)->state |= MMC_STATE_PRESENT)
>  #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
>  #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
> +#define mmc_card_set_hs200(c)  ((c)->state |= MMC_STATE_HIGHSPEED_200)
>  #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
>  #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
>  #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index aed5bc7..9d460d7 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -60,6 +60,8 @@ struct mmc_ios {
>  #define MMC_SDR_MODE           0
>  #define MMC_1_2V_DDR_MODE      1
>  #define MMC_1_8V_DDR_MODE      2
> +#define MMC_1_2V_SDR_MODE      3
> +#define MMC_1_8V_SDR_MODE      4
>
>        unsigned char   signal_voltage;         /* signalling voltage (1.8V or 3.3V) */
>
> @@ -236,6 +238,12 @@ struct mmc_host {
>  #define MMC_CAP_CMD23          (1 << 30)       /* CMD23 supported. */
>  #define MMC_CAP_HW_RESET       (1 << 31)       /* Hardware reset */
>
> +       unsigned long           ext_caps;       /* extended Host capabilities */
> +#define MMC_CAP_HS200          (1 << 0)        /* Host supports HS200 mode */
> +#define MMC_CAP_HS200_1_8V_SDR (1 << 1)        /* can support */
> +#define MMC_CAP_HS200_1_2V_SDR (1 << 2)        /* can support */
> +#define MMC_CAP_HIGHSPEED_200  (1 << 3)        /* Can do MMC HS200 timing */
> +
>        unsigned int            caps2;          /* More host capabilities */
>
>  #define MMC_CAP2_BOOTPART_NOACC        (1 << 0)        /* Boot partition no access */
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 50af227..3f2e210 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -51,6 +51,7 @@
>  #define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
>  #define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
>  #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
> +#define MMC_SEND_TUNING_BLOCK_HS200    21      /* adtc R1  */
>
>   /* class 3 */
>  #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
> @@ -321,13 +322,18 @@ struct _mmc_csd {
>
>  #define EXT_CSD_CARD_TYPE_26   (1<<0)  /* Card can run at 26MHz */
>  #define EXT_CSD_CARD_TYPE_52   (1<<1)  /* Card can run at 52MHz */
> -#define EXT_CSD_CARD_TYPE_MASK 0xF     /* Mask out reserved bits */
> +#define EXT_CSD_CARD_TYPE_MASK 0x3F    /* Mask out reserved bits */
>  #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
>                                             /* DDR mode @1.8V or 3V I/O */
>  #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
>                                             /* DDR mode @1.2V I/O */
>  #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
>                                        | EXT_CSD_CARD_TYPE_DDR_1_2V)
> +#define EXT_CSD_CARD_TYPE_SDR_1_8V     (1<<4)  /* Card can run at 200MHz */
> +#define EXT_CSD_CARD_TYPE_SDR_1_2V     (1<<5)  /* Card can run at 200MHz */
> +                                               /* SDR mode @1.2V I/O */
> +#define EXT_CSD_CARD_TYPE_SDR_200      (EXT_CSD_CARD_TYPE_SDR_1_8V     \
> +                                       | EXT_CSD_CARD_TYPE_SDR_1_2V)
>
>  #define EXT_CSD_BUS_WIDTH_1    0       /* Card is in 1 bit mode */
>  #define EXT_CSD_BUS_WIDTH_4    1       /* Card is in 4 bit mode */
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> index 5666f3a..b6e81bd 100644
> --- a/include/linux/mmc/sdhci.h
> +++ b/include/linux/mmc/sdhci.h
> @@ -115,6 +115,7 @@ struct sdhci_host {
>  #define SDHCI_NEEDS_RETUNING   (1<<5)  /* Host needs retuning */
>  #define SDHCI_AUTO_CMD12       (1<<6)  /* Auto CMD12 support */
>  #define SDHCI_AUTO_CMD23       (1<<7)  /* Auto CMD23 support */
> +#define SDHCI_HS200_NEEDS_TUNING (1<<8)        /* HS200 needs tuning */
>
>        unsigned int version;   /* SDHCI spec. version */
>
> --
> 1.7.1
>
>