| Message ID | 20210513134550.2117-2-shameerali.kolothum.thodi@huawei.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ACPI/IORT: Support for IORT RMR node | expand |
On Thu, May 13, 2021 at 02:45:43PM +0100, Shameer Kolothum wrote: > Add support for parsing RMR node information from ACPI. > Find associated stream id and smmu node info from the > RMR node and populate a linked list with RMR memory > descriptors. "Add support for parsing RMR node information from ACPI. Find the associated streamid and SMMU node info from the RMR node and populate a linked list with RMR memory descriptors." > Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> > --- > drivers/acpi/arm64/iort.c | 104 +++++++++++++++++++++++++++++++++++++- > 1 file changed, 103 insertions(+), 1 deletion(-) > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index 3912a1f6058e..fea1ffaedf3b 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -40,6 +40,19 @@ struct iort_fwnode { > static LIST_HEAD(iort_fwnode_list); > static DEFINE_SPINLOCK(iort_fwnode_lock); > > +/* > + * One entry for IORT RMR. > + */ > +struct iort_rmr_entry { > + struct list_head list; > + u32 sid; > + struct acpi_iort_node *smmu; > + struct acpi_iort_rmr_desc *rmr_desc; > + u32 flags; > +}; > + > +static LIST_HEAD(iort_rmr_list); /* list of RMR regions from ACPI */ > + > /** > * iort_set_fwnode() - Create iort_fwnode and use it to register > * iommu data in the iort_fwnode_list > @@ -393,7 +406,8 @@ static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, > if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || > node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || > node->type == ACPI_IORT_NODE_SMMU_V3 || > - node->type == ACPI_IORT_NODE_PMCG) { > + node->type == ACPI_IORT_NODE_PMCG || > + node->type == ACPI_IORT_NODE_RMR) { > *id_out = map->output_base; > return parent; > } > @@ -1660,6 +1674,91 @@ static void __init iort_enable_acs(struct acpi_iort_node *iort_node) > #else > static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { } > #endif > +static int iort_rmr_desc_valid(struct acpi_iort_rmr_desc *desc, u32 count) > +{ > + int i, j; > + > + for (i = 0; i < count; i++) { > + u64 end, start = desc[i].base_address, length = desc[i].length; > + > + if (!IS_ALIGNED(start, SZ_64K) || !IS_ALIGNED(length, SZ_64K)) > + return -EINVAL; > + > + end = start + length - 1; > + > + /* Check for address overlap */ > + for (j = i + 1; j < count; j++) { > + u64 e_start = desc[j].base_address; > + u64 e_end = e_start + desc[j].length - 1; > + > + if (start <= e_end && end >= e_start) > + return -EINVAL; > + } > + } > + > + return 0; > +} > + > +static int __init iort_parse_rmr(struct acpi_iort_node *iort_node) > +{ > + struct acpi_iort_node *smmu; > + struct iort_rmr_entry *e; > + struct acpi_iort_rmr *rmr; > + struct acpi_iort_rmr_desc *rmr_desc; > + u32 map_count = iort_node->mapping_count; > + u32 sid; ^ Remove one space. > + int i, ret = 0; > + > + if (iort_node->type != ACPI_IORT_NODE_RMR) > + return 0; > + > + if (!iort_node->mapping_offset || map_count != 1) { > + pr_err(FW_BUG "Invalid ID mapping, skipping RMR node %p\n", > + iort_node); > + return -EINVAL; > + } > + > + /* Retrieve associated smmu and stream id */ > + smmu = iort_node_get_id(iort_node, &sid, 0); > + if (!smmu) { > + pr_err(FW_BUG "Invalid SMMU reference, skipping RMR node %p\n", > + iort_node); > + return -EINVAL; > + } > + > + /* Retrieve RMR data */ > + rmr = (struct acpi_iort_rmr *)iort_node->node_data; > + if (!rmr->rmr_offset || !rmr->rmr_count) { > + pr_err(FW_BUG "Invalid RMR descriptor array, skipping RMR node %p\n", > + iort_node); > + return -EINVAL; > + } > + > + rmr_desc = ACPI_ADD_PTR(struct acpi_iort_rmr_desc, iort_node, > + rmr->rmr_offset); > + > + ret = iort_rmr_desc_valid(rmr_desc, rmr->rmr_count); > + if (ret) { > + pr_err(FW_BUG "Invalid RMR descriptor[%d] for node %p, skipping...\n", > + i, iort_node); > + return ret; > + } > + > + for (i = 0; i < rmr->rmr_count; i++, rmr_desc++) { > + e = kmalloc(sizeof(*e), GFP_KERNEL); > + if (!e) > + return -ENOMEM; > + > + e->sid = sid; > + e->smmu = smmu; > + e->rmr_desc = rmr_desc; > + e->flags = rmr->flags; > + > + list_add_tail(&e->list, &iort_rmr_list); > + } > + > + return 0; > +} > > static void __init iort_init_platform_devices(void) > { > @@ -1689,6 +1788,9 @@ static void __init iort_init_platform_devices(void) > > iort_enable_acs(iort_node); > > + if (iort_table->revision == 3) > + iort_parse_rmr(iort_node); > + I prefer creating a iort_parse_rmr(void) function (looping through the nodes and only parsing the relevant ones) rather that doing this in: iort_init_platform_devices() it is better IMO. Thanks, Lorenzo > ops = iort_get_dev_cfg(iort_node); > if (ops) { > fwnode = acpi_alloc_fwnode_static(); > -- > 2.17.1 >
Hi Lorenzo, > -----Original Message----- > From: Lorenzo Pieralisi [mailto:lorenzo.pieralisi@arm.com] > Sent: 03 June 2021 12:37 > To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> > Cc: linux-arm-kernel@lists.infradead.org; linux-acpi@vger.kernel.org; > iommu@lists.linux-foundation.org; Linuxarm <linuxarm@huawei.com>; > joro@8bytes.org; robin.murphy@arm.com; wanghuiqiang > <wanghuiqiang@huawei.com>; Guohanjun (Hanjun Guo) > <guohanjun@huawei.com>; steven.price@arm.com; Sami.Mujawar@arm.com; > jon@solid-run.com; eric.auger@redhat.com; yangyicong > <yangyicong@huawei.com> > Subject: Re: [PATCH v4 1/8] ACPI/IORT: Add support for RMR node parsing > > On Thu, May 13, 2021 at 02:45:43PM +0100, Shameer Kolothum wrote: > > Add support for parsing RMR node information from ACPI. > > Find associated stream id and smmu node info from the > > RMR node and populate a linked list with RMR memory > > descriptors. > > "Add support for parsing RMR node information from ACPI. > > Find the associated streamid and SMMU node info from the > RMR node and populate a linked list with RMR memory > descriptors." Ok. Thanks for taking a look. Just a quick update, there is a v5[1] of this series and better to take a look at that before you read further. (Anyways, the comments so far are still valid for v5 as well I think). Thanks, Shameer [1]. https://lore.kernel.org/linux-acpi/20210524110222.2212-1-shameerali.kolothum.thodi@huawei.com/ > > Signed-off-by: Shameer Kolothum > <shameerali.kolothum.thodi@huawei.com> > > --- > > drivers/acpi/arm64/iort.c | 104 > +++++++++++++++++++++++++++++++++++++- > > 1 file changed, 103 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > > index 3912a1f6058e..fea1ffaedf3b 100644 > > --- a/drivers/acpi/arm64/iort.c > > +++ b/drivers/acpi/arm64/iort.c > > @@ -40,6 +40,19 @@ struct iort_fwnode { > > static LIST_HEAD(iort_fwnode_list); > > static DEFINE_SPINLOCK(iort_fwnode_lock); > > > > +/* > > + * One entry for IORT RMR. > > + */ > > +struct iort_rmr_entry { > > + struct list_head list; > > + u32 sid; > > + struct acpi_iort_node *smmu; > > + struct acpi_iort_rmr_desc *rmr_desc; > > + u32 flags; > > +}; > > + > > +static LIST_HEAD(iort_rmr_list); /* list of RMR regions from ACPI > */ > > + > > /** > > * iort_set_fwnode() - Create iort_fwnode and use it to register > > * iommu data in the iort_fwnode_list > > @@ -393,7 +406,8 @@ static struct acpi_iort_node > *iort_node_get_id(struct acpi_iort_node *node, > > if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || > > node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || > > node->type == ACPI_IORT_NODE_SMMU_V3 || > > - node->type == ACPI_IORT_NODE_PMCG) { > > + node->type == ACPI_IORT_NODE_PMCG || > > + node->type == ACPI_IORT_NODE_RMR) { > > *id_out = map->output_base; > > return parent; > > } > > @@ -1660,6 +1674,91 @@ static void __init iort_enable_acs(struct > acpi_iort_node *iort_node) > > #else > > static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { } > > #endif > > +static int iort_rmr_desc_valid(struct acpi_iort_rmr_desc *desc, u32 count) > > +{ > > + int i, j; > > + > > + for (i = 0; i < count; i++) { > > + u64 end, start = desc[i].base_address, length = desc[i].length; > > + > > + if (!IS_ALIGNED(start, SZ_64K) || !IS_ALIGNED(length, SZ_64K)) > > + return -EINVAL; > > + > > + end = start + length - 1; > > + > > + /* Check for address overlap */ > > + for (j = i + 1; j < count; j++) { > > + u64 e_start = desc[j].base_address; > > + u64 e_end = e_start + desc[j].length - 1; > > + > > + if (start <= e_end && end >= e_start) > > + return -EINVAL; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static int __init iort_parse_rmr(struct acpi_iort_node *iort_node) > > +{ > > + struct acpi_iort_node *smmu; > > + struct iort_rmr_entry *e; > > + struct acpi_iort_rmr *rmr; > > + struct acpi_iort_rmr_desc *rmr_desc; > > + u32 map_count = iort_node->mapping_count; > > + u32 sid; > ^ > Remove one space. > > > + int i, ret = 0; > > + > > + if (iort_node->type != ACPI_IORT_NODE_RMR) > > + return 0; > > + > > + if (!iort_node->mapping_offset || map_count != 1) { > > + pr_err(FW_BUG "Invalid ID mapping, skipping RMR node %p\n", > > + iort_node); > > + return -EINVAL; > > + } > > + > > + /* Retrieve associated smmu and stream id */ > > + smmu = iort_node_get_id(iort_node, &sid, 0); > > + if (!smmu) { > > + pr_err(FW_BUG "Invalid SMMU reference, skipping RMR > node %p\n", > > + iort_node); > > + return -EINVAL; > > + } > > + > > + /* Retrieve RMR data */ > > + rmr = (struct acpi_iort_rmr *)iort_node->node_data; > > + if (!rmr->rmr_offset || !rmr->rmr_count) { > > + pr_err(FW_BUG "Invalid RMR descriptor array, skipping RMR > node %p\n", > > + iort_node); > > + return -EINVAL; > > + } > > + > > + rmr_desc = ACPI_ADD_PTR(struct acpi_iort_rmr_desc, iort_node, > > + rmr->rmr_offset); > > + > > + ret = iort_rmr_desc_valid(rmr_desc, rmr->rmr_count); > > + if (ret) { > > + pr_err(FW_BUG "Invalid RMR descriptor[%d] for node %p, > skipping...\n", > > + i, iort_node); > > + return ret; > > + } > > + > > + for (i = 0; i < rmr->rmr_count; i++, rmr_desc++) { > > + e = kmalloc(sizeof(*e), GFP_KERNEL); > > + if (!e) > > + return -ENOMEM; > > + > > + e->sid = sid; > > + e->smmu = smmu; > > + e->rmr_desc = rmr_desc; > > + e->flags = rmr->flags; > > + > > + list_add_tail(&e->list, &iort_rmr_list); > > + } > > + > > + return 0; > > +} > > > > static void __init iort_init_platform_devices(void) > > { > > @@ -1689,6 +1788,9 @@ static void __init iort_init_platform_devices(void) > > > > iort_enable_acs(iort_node); > > > > + if (iort_table->revision == 3) > > + iort_parse_rmr(iort_node); > > + > > I prefer creating a iort_parse_rmr(void) function (looping through the > nodes and only parsing the relevant ones) rather that doing this in: > > iort_init_platform_devices() > > it is better IMO. > > Thanks, > Lorenzo > > > ops = iort_get_dev_cfg(iort_node); > > if (ops) { > > fwnode = acpi_alloc_fwnode_static(); > > -- > > 2.17.1 > >
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 3912a1f6058e..fea1ffaedf3b 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -40,6 +40,19 @@ struct iort_fwnode { static LIST_HEAD(iort_fwnode_list); static DEFINE_SPINLOCK(iort_fwnode_lock); +/* + * One entry for IORT RMR. + */ +struct iort_rmr_entry { + struct list_head list; + u32 sid; + struct acpi_iort_node *smmu; + struct acpi_iort_rmr_desc *rmr_desc; + u32 flags; +}; + +static LIST_HEAD(iort_rmr_list); /* list of RMR regions from ACPI */ + /** * iort_set_fwnode() - Create iort_fwnode and use it to register * iommu data in the iort_fwnode_list @@ -393,7 +406,8 @@ static struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || node->type == ACPI_IORT_NODE_SMMU_V3 || - node->type == ACPI_IORT_NODE_PMCG) { + node->type == ACPI_IORT_NODE_PMCG || + node->type == ACPI_IORT_NODE_RMR) { *id_out = map->output_base; return parent; } @@ -1660,6 +1674,91 @@ static void __init iort_enable_acs(struct acpi_iort_node *iort_node) #else static inline void iort_enable_acs(struct acpi_iort_node *iort_node) { } #endif +static int iort_rmr_desc_valid(struct acpi_iort_rmr_desc *desc, u32 count) +{ + int i, j; + + for (i = 0; i < count; i++) { + u64 end, start = desc[i].base_address, length = desc[i].length; + + if (!IS_ALIGNED(start, SZ_64K) || !IS_ALIGNED(length, SZ_64K)) + return -EINVAL; + + end = start + length - 1; + + /* Check for address overlap */ + for (j = i + 1; j < count; j++) { + u64 e_start = desc[j].base_address; + u64 e_end = e_start + desc[j].length - 1; + + if (start <= e_end && end >= e_start) + return -EINVAL; + } + } + + return 0; +} + +static int __init iort_parse_rmr(struct acpi_iort_node *iort_node) +{ + struct acpi_iort_node *smmu; + struct iort_rmr_entry *e; + struct acpi_iort_rmr *rmr; + struct acpi_iort_rmr_desc *rmr_desc; + u32 map_count = iort_node->mapping_count; + u32 sid; + int i, ret = 0; + + if (iort_node->type != ACPI_IORT_NODE_RMR) + return 0; + + if (!iort_node->mapping_offset || map_count != 1) { + pr_err(FW_BUG "Invalid ID mapping, skipping RMR node %p\n", + iort_node); + return -EINVAL; + } + + /* Retrieve associated smmu and stream id */ + smmu = iort_node_get_id(iort_node, &sid, 0); + if (!smmu) { + pr_err(FW_BUG "Invalid SMMU reference, skipping RMR node %p\n", + iort_node); + return -EINVAL; + } + + /* Retrieve RMR data */ + rmr = (struct acpi_iort_rmr *)iort_node->node_data; + if (!rmr->rmr_offset || !rmr->rmr_count) { + pr_err(FW_BUG "Invalid RMR descriptor array, skipping RMR node %p\n", + iort_node); + return -EINVAL; + } + + rmr_desc = ACPI_ADD_PTR(struct acpi_iort_rmr_desc, iort_node, + rmr->rmr_offset); + + ret = iort_rmr_desc_valid(rmr_desc, rmr->rmr_count); + if (ret) { + pr_err(FW_BUG "Invalid RMR descriptor[%d] for node %p, skipping...\n", + i, iort_node); + return ret; + } + + for (i = 0; i < rmr->rmr_count; i++, rmr_desc++) { + e = kmalloc(sizeof(*e), GFP_KERNEL); + if (!e) + return -ENOMEM; + + e->sid = sid; + e->smmu = smmu; + e->rmr_desc = rmr_desc; + e->flags = rmr->flags; + + list_add_tail(&e->list, &iort_rmr_list); + } + + return 0; +} static void __init iort_init_platform_devices(void) { @@ -1689,6 +1788,9 @@ static void __init iort_init_platform_devices(void) iort_enable_acs(iort_node); + if (iort_table->revision == 3) + iort_parse_rmr(iort_node); + ops = iort_get_dev_cfg(iort_node); if (ops) { fwnode = acpi_alloc_fwnode_static();
Add support for parsing RMR node information from ACPI. Find associated stream id and smmu node info from the RMR node and populate a linked list with RMR memory descriptors. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> --- drivers/acpi/arm64/iort.c | 104 +++++++++++++++++++++++++++++++++++++- 1 file changed, 103 insertions(+), 1 deletion(-) -- 2.17.1