| Message ID | 20210514192218.13022-16-prabhakar.mahadev-lad.rj@bp.renesas.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support | expand |
Hi Prabhakar, On Fri, May 14, 2021 at 9:24 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > Add initial DTSI for RZ/G2{L,LC} SoC's. > > File structure: > r9a07g044.dtsi => RZ/G2L family SoC common parts > r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC > r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC > r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Thanks for your patch! > index 000000000000..c625d302f889 > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi > @@ -0,0 +1,70 @@ > +// SPDX-License-Identifier: GPL-2.0 Do we want to use SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) for new DTS files? This actually also applies to <dt-bindings/...> files. > +/* > + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts > + * > + * Copyright (C) 2021 Renesas Electronics Corp. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/r9a07g044l-cpg.h> > + > +/ { > + compatible = "renesas,r9a07g044"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + extal_clk: extal { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + /* This value must be overridden by the board */ > + clock-frequency = <0>; > + }; > + > + psci { > + compatible = "arm,psci-1.0", "arm,psci-0.2"; > + method = "smc"; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + scif0: serial@1004b800 { > + compatible = "renesas,scif-r9a07g044"; > + reg = <0 0x1004b800 0 0x400>; > + interrupts = > + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; "make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/renesas,scif.yaml": arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml: serial@1004b800: interrupts: 'oneOf' conditional failed, one must be fixed: [[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]] is too long Additional items are not allowed ([0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4] were unexpected) Additional items are not allowed ([0, 384, 4] was unexpected) [[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]] is too short One interrupt is missing. According to the documentation, "tei" and "dri" share an interrupt, so they should map to the same interrupt number. Please add interrupt-names. > + clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; > + clock-names = "fck"; > + power-domains = <&cpg>; > + resets = <&cpg R9A07G044_CLK_SCIF0>; > + status = "disabled"; > + }; > + > + devid: chipid@11020a04 { > + compatible = "renesas,devid"; > + reg = <0 0x11020a04 0 4>; > + }; > + > + gic: interrupt-controller@11900000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + interrupt-controller; > + reg = <0x0 0x11900000 0 0x40000>, > + <0x0 0x11940000 0 0x60000>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&cpg CPG_MOD R9A07G044_CLK_GIC600>; > + clock-names = "gic6000"; This looks like a weird name ;-) In addition, it should be the consumer clock name, not the provider clock name. > + power-domains = <&cpg>; > + resets = <&cpg R9A07G044_CLK_GIC600>; "make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml": arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml: interrupt-controller@11900000: 'clock-names', 'clocks', 'power-domains', 'resets' do not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+' These properties should be added to the GIC-v3 bindings, cfr. the normal GIC bindings. > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi > new file mode 100644 > index 000000000000..8d396b9100c1 > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi > @@ -0,0 +1,21 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the RZ/G2L common SoC parts > + * > + * Copyright (C) 2021 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > +#include "r9a07g044.dtsi" > + > +&soc { > + cpg: clock-controller@11010000 { > + compatible = "renesas,r9a07g044l-cpg"; > + reg = <0 0x11010000 0 0x10000>; > + clocks = <&extal_clk>; > + clock-names = "extal"; > + #clock-cells = <2>; > + #reset-cells = <1>; > + #power-domain-cells = <0>; > + }; As I think this is shared by RZ/G2L and RZ/G2LC, it belongs to r9a07g044.dtsi. > +}; > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi > new file mode 100644 > index 000000000000..44d4504e44c3 > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi > @@ -0,0 +1,43 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts > + * > + * Copyright (C) 2021 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > +#include "r9a07g044l.dtsi" > + > +/ { > + compatible = "renesas,r9a07g044l1"; > + #address-cells = <2>; > + #size-cells = <2>; #{address,size}-cells already defined in r9a07g044.dtsi. > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + a55_0: cpu@0 { > + compatible = "arm,cortex-a55"; > + reg = <0>; > + device_type = "cpu"; > + next-level-cache = <&L3_CA55>; > + enable-method = "psci"; > + }; > + > + L3_CA55: cache-controller-0 { > + compatible = "cache"; > + cache-unified; > + cache-size = <0x40000>; > + }; I think the first CPU core should be in the base r9a07g044.dtsi file. > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts-extended = > + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; Also in the base file, with interrupts-extended overridden where needed? > + }; > +}; > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi > new file mode 100644 > index 000000000000..33bb35e1c369 > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi > @@ -0,0 +1,62 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the RZ/G2L R9A07G044L2 common parts > + * > + * Copyright (C) 2021 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > +#include "r9a07g044l.dtsi" > + > +/ { > + compatible = "renesas,r9a07g044l2"; > + #address-cells = <2>; > + #size-cells = <2>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&a55_0>; > + }; > + core1 { > + cpu = <&a55_1>; > + }; > + }; > + }; > + > + a55_0: cpu@0 { > + compatible = "arm,cortex-a55"; > + reg = <0>; > + device_type = "cpu"; > + next-level-cache = <&L3_CA55>; > + enable-method = "psci"; > + }; > + > + a55_1: cpu@1 { > + compatible = "arm,cortex-a55"; > + reg = <0x100>; > + device_type = "cpu"; > + next-level-cache = <&L3_CA55>; > + enable-method = "psci"; > + }; > + > + L3_CA55: cache-controller-0 { > + compatible = "cache"; > + cache-unified; > + cache-size = <0x40000>; > + }; I think (at least) the first CPU core should be in the base r9a07g044.dtsi file. Probably the second CPU core should be in the base file, too, and removed by /delete-node/ in r9a07g044l1.dtsi? > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts-extended = > + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; > + }; Also in the base file, with interrupts-extended overridden where needed? > +}; > -- > 2.17.1 > -- Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert, Thank you for the review. On Fri, May 21, 2021 at 4:35 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Fri, May 14, 2021 at 9:24 PM Lad Prabhakar > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > Add initial DTSI for RZ/G2{L,LC} SoC's. > > > > File structure: > > r9a07g044.dtsi => RZ/G2L family SoC common parts > > r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC > > r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC > > r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > Thanks for your patch! > > > index 000000000000..c625d302f889 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi > > @@ -0,0 +1,70 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > Do we want to use > > SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > for new DTS files? > This actually also applies to <dt-bindings/...> files. > > > +/* > > + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts > > + * > > + * Copyright (C) 2021 Renesas Electronics Corp. > > + */ > > + > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/clock/r9a07g044l-cpg.h> > > + > > +/ { > > + compatible = "renesas,r9a07g044"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + extal_clk: extal { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + /* This value must be overridden by the board */ > > + clock-frequency = <0>; > > + }; > > + > > + psci { > > + compatible = "arm,psci-1.0", "arm,psci-0.2"; > > + method = "smc"; > > + }; > > + > > + soc: soc { > > + compatible = "simple-bus"; > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + scif0: serial@1004b800 { > > + compatible = "renesas,scif-r9a07g044"; > > + reg = <0 0x1004b800 0 0x400>; > > + interrupts = > > + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; > > "make dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/renesas,scif.yaml": > > arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml: > serial@1004b800: interrupts: 'oneOf' conditional failed, one must be > fixed: > [[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]] > is too long > Additional items are not allowed ([0, 382, 4], [0, 383, 4], [0, > 381, 4], [0, 384, 4] were unexpected) > Additional items are not allowed ([0, 384, 4] was unexpected) > [[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]] > is too short > > One interrupt is missing. According to the documentation, "tei" and > "dri" share an interrupt, so they should map to the same interrupt number. > Please add interrupt-names. > Agreed will do. > > + clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; > > + clock-names = "fck"; > > + power-domains = <&cpg>; > > + resets = <&cpg R9A07G044_CLK_SCIF0>; > > + status = "disabled"; > > + }; > > + > > + devid: chipid@11020a04 { > > + compatible = "renesas,devid"; > > + reg = <0 0x11020a04 0 4>; > > + }; > > + > > + gic: interrupt-controller@11900000 { > > + compatible = "arm,gic-v3"; > > + #interrupt-cells = <3>; > > + #address-cells = <0>; > > + interrupt-controller; > > + reg = <0x0 0x11900000 0 0x40000>, > > + <0x0 0x11940000 0 0x60000>; > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&cpg CPG_MOD R9A07G044_CLK_GIC600>; > > + clock-names = "gic6000"; > > This looks like a weird name ;-) > In addition, it should be the consumer clock name, not the provider > clock name. > Agreed will rename that. > > + power-domains = <&cpg>; > > + resets = <&cpg R9A07G044_CLK_GIC600>; > > "make dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml": > > arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml: > interrupt-controller@11900000: 'clock-names', 'clocks', > 'power-domains', 'resets' do not match any of the regexes: > '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', > '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+' > > These properties should be added to the GIC-v3 bindings, cfr. the normal > GIC bindings. > Agreed will do that. > > > + }; > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi > > new file mode 100644 > > index 000000000000..8d396b9100c1 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi > > @@ -0,0 +1,21 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for the RZ/G2L common SoC parts > > + * > > + * Copyright (C) 2021 Renesas Electronics Corp. > > + */ > > + > > +/dts-v1/; > > +#include "r9a07g044.dtsi" > > + > > +&soc { > > + cpg: clock-controller@11010000 { > > + compatible = "renesas,r9a07g044l-cpg"; > > + reg = <0 0x11010000 0 0x10000>; > > + clocks = <&extal_clk>; > > + clock-names = "extal"; > > + #clock-cells = <2>; > > + #reset-cells = <1>; > > + #power-domain-cells = <0>; > > + }; > > As I think this is shared by RZ/G2L and RZ/G2LC, it belongs to > r9a07g044.dtsi. > As some of the IP blocks present on RZ/G2L aren't present in RZ/G2LC the clocks for the IP will be missing hence this is added to SoC specific dtsi. > > +}; > > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi > > new file mode 100644 > > index 000000000000..44d4504e44c3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi > > @@ -0,0 +1,43 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts > > + * > > + * Copyright (C) 2021 Renesas Electronics Corp. > > + */ > > + > > +/dts-v1/; > > +#include "r9a07g044l.dtsi" > > + > > +/ { > > + compatible = "renesas,r9a07g044l1"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > #{address,size}-cells already defined in r9a07g044.dtsi. > Will drop that. > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + a55_0: cpu@0 { > > + compatible = "arm,cortex-a55"; > > + reg = <0>; > > + device_type = "cpu"; > > + next-level-cache = <&L3_CA55>; > > + enable-method = "psci"; > > + }; > > + > > + L3_CA55: cache-controller-0 { > > + compatible = "cache"; > > + cache-unified; > > + cache-size = <0x40000>; > > + }; > > I think the first CPU core should be in the base r9a07g044.dtsi file. > OK will move that. > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts-extended = > > + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, > > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, > > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, > > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; > > Also in the base file, with interrupts-extended overridden where > needed? > OK will override here with the timer node moved from r9a07g044l2.dtsi to common SoC file. > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi > > new file mode 100644 > > index 000000000000..33bb35e1c369 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi > > @@ -0,0 +1,62 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for the RZ/G2L R9A07G044L2 common parts > > + * > > + * Copyright (C) 2021 Renesas Electronics Corp. > > + */ > > + > > +/dts-v1/; > > +#include "r9a07g044l.dtsi" > > + > > +/ { > > + compatible = "renesas,r9a07g044l2"; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&a55_0>; > > + }; > > + core1 { > > + cpu = <&a55_1>; > > + }; > > + }; > > + }; > > + > > + a55_0: cpu@0 { > > + compatible = "arm,cortex-a55"; > > + reg = <0>; > > + device_type = "cpu"; > > + next-level-cache = <&L3_CA55>; > > + enable-method = "psci"; > > + }; > > + > > + a55_1: cpu@1 { > > + compatible = "arm,cortex-a55"; > > + reg = <0x100>; > > + device_type = "cpu"; > > + next-level-cache = <&L3_CA55>; > > + enable-method = "psci"; > > + }; > > + > > + L3_CA55: cache-controller-0 { > > + compatible = "cache"; > > + cache-unified; > > + cache-size = <0x40000>; > > + }; > > I think (at least) the first CPU core should be in the base > r9a07g044.dtsi file. > Probably the second CPU core should be in the base file, too, and > removed by /delete-node/ in r9a07g044l1.dtsi? > Agreed will do that. > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts-extended = > > + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > > + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > > + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, > > + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; > > + }; > > Also in the base file, with interrupts-extended overridden where > needed? > Will move this node to common SoC r9a07g044.dtsi file and override in r9a07g044l1.dtsi with CPU maks to 1. Cheers, Prabhakar > > +}; > > -- > > 2.17.1 > > > > > -- > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
Hi Prabhakar, On Fri, May 14, 2021 at 9:24 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > Add initial DTSI for RZ/G2{L,LC} SoC's. > > File structure: > r9a07g044.dtsi => RZ/G2L family SoC common parts > r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC > r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC > r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi > @@ -0,0 +1,70 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts > + * > + * Copyright (C) 2021 Renesas Electronics Corp. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/r9a07g044l-cpg.h> > + > +/ { > + compatible = "renesas,r9a07g044"; > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi > @@ -0,0 +1,43 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts > + * > + * Copyright (C) 2021 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > +#include "r9a07g044l.dtsi" > + > +/ { > + compatible = "renesas,r9a07g044l1"; This overwrites the main compatible value set by r9a07g044.dtsi before. As per your bindings, you want both: compatible = "renesas,r9a07g044l1", "renesas,r9a07g044". Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert, On Thu, May 27, 2021 at 12:17 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Fri, May 14, 2021 at 9:24 PM Lad Prabhakar > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > Add initial DTSI for RZ/G2{L,LC} SoC's. > > > > File structure: > > r9a07g044.dtsi => RZ/G2L family SoC common parts > > r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC > > r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC > > r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > > --- /dev/null > > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi > > @@ -0,0 +1,70 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts > > + * > > + * Copyright (C) 2021 Renesas Electronics Corp. > > + */ > > + > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/clock/r9a07g044l-cpg.h> > > + > > +/ { > > + compatible = "renesas,r9a07g044"; > > > --- /dev/null > > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi > > @@ -0,0 +1,43 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts > > + * > > + * Copyright (C) 2021 Renesas Electronics Corp. > > + */ > > + > > +/dts-v1/; > > +#include "r9a07g044l.dtsi" > > + > > +/ { > > + compatible = "renesas,r9a07g044l1"; > > This overwrites the main compatible value set by r9a07g044.dtsi before. > As per your bindings, you want both: > > compatible = "renesas,r9a07g044l1", "renesas,r9a07g044". > Agreed will fix that in next respin. Cheers, Prabhakar
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi new file mode 100644 index 000000000000..c625d302f889 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a07g044l-cpg.h> + +/ { + compatible = "renesas,r9a07g044"; + #address-cells = <2>; + #size-cells = <2>; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CLK_SCIF0>; + status = "disabled"; + }; + + devid: chipid@11020a04 { + compatible = "renesas,devid"; + reg = <0 0x11020a04 0 4>; + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD R9A07G044_CLK_GIC600>; + clock-names = "gic6000"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CLK_GIC600>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi new file mode 100644 index 000000000000..8d396b9100c1 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2L common SoC parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +&soc { + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044l-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi new file mode 100644 index 000000000000..44d4504e44c3 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044l.dtsi" + +/ { + compatible = "renesas,r9a07g044l1"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a55_0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi new file mode 100644 index 000000000000..33bb35e1c369 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2L R9A07G044L2 common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044l.dtsi" + +/ { + compatible = "renesas,r9a07g044l2"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a55_0>; + }; + core1 { + cpu = <&a55_1>; + }; + }; + }; + + a55_0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + a55_1: cpu@1 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +};
Add initial DTSI for RZ/G2{L,LC} SoC's. File structure: r9a07g044.dtsi => RZ/G2L family SoC common parts r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 70 ++++++++++++++++++++ arch/arm64/boot/dts/renesas/r9a07g044l.dtsi | 21 ++++++ arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi | 43 ++++++++++++ arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi | 62 +++++++++++++++++ 4 files changed, 196 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi