| Message ID | cover.1621097174.git.noodles@earth.li |
|---|---|
| Headers | show |
| Series | ARM: dts: qcom: Enable various devices for IPQ806x / RB3011 | expand |
On 15-05-21, 17:52, Jonathan McDowell wrote: > gcc: clock-controller@900000 { > - compatible = "qcom,gcc-ipq8064"; > + compatible = "qcom,gcc-ipq8064", "syscon"; Does this belong here > reg = <0x00900000 0x4000>; > #clock-cells = <1>; > #reset-cells = <1>; > + #power-domain-cells = <1>; > + > + tsens: thermal-sensor@900000 { > + compatible = "qcom,ipq8064-tsens"; > + > + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; > + nvmem-cell-names = "calib", "calib_backup"; > + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow"; > + > + #qcom,sensors = <11>; > + #thermal-sensor-cells = <1>; > + }; We have sensor under gcc node..? -- ~Vinod
On Mon, May 17, 2021 at 03:12:02PM +0530, Vinod Koul wrote: > On 15-05-21, 17:52, Jonathan McDowell wrote: > > > gcc: clock-controller@900000 { > > - compatible = "qcom,gcc-ipq8064"; > > + compatible = "qcom,gcc-ipq8064", "syscon"; > > Does this belong here No, not sure how that slipped in, will remove for v2. > > reg = <0x00900000 0x4000>; > > #clock-cells = <1>; > > #reset-cells = <1>; > > + #power-domain-cells = <1>; > > + > > + tsens: thermal-sensor@900000 { > > + compatible = "qcom,ipq8064-tsens"; > > + > > + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; > > + nvmem-cell-names = "calib", "calib_backup"; > > + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "uplow"; > > + > > + #qcom,sensors = <11>; > > + #thermal-sensor-cells = <1>; > > + }; > > We have sensor under gcc node..? Weirdly, yes, that seems to be where it lives for the 8064. J. -- I'm dangerous when I know what I'm doing.
This series adds various devices (NAND, USB, tsens, L2CC, RPM) which have either recently gained mainline drivers, or just failed to be previously added, to the DTS for the IPQ806x platform. It then enables them for the MikroTik RB3011 platform, where they have all been tested. I've done the additions to the main IPQ806x DTS as separate commits for each logical set, and then a single wholesale set of changes for the RB3011 to turn everything on. Happy to squash to 1/2 commits or split out further if desired. v2: Fix ADM label to "dma-controller" Drop spurious "syscon" on GCC for tsens changes Jonathan McDowell (5): ARM: dts: qcom: Add ADM DMA + NAND definitions to ipq806x ARM: dts: qcom: Add tsens details to ipq806x ARM: dts: qcom: Add USB port definitions to ipq806x ARM: dts: qcom: add L2CC and RPM for IPQ8064 ARM: dts: qcom: Enable NAND + USB for RB3011 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 58 +++ arch/arm/boot/dts/qcom-ipq8064.dtsi | 425 ++++++++++++++++++++++ 2 files changed, 483 insertions(+)