diff mbox series

ARM: imx7d-remarkable2.dts: Add WiFi support

Message ID 20210418210003.2806-1-alistair@alistair23.me
State Superseded
Headers show
Series ARM: imx7d-remarkable2.dts: Add WiFi support | expand

Commit Message

Alistair April 18, 2021, 9 p.m. UTC
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 91 +++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

Comments

Shawn Guo May 13, 2021, 1:35 p.m. UTC | #1
On Mon, Apr 19, 2021 at 07:00:03AM +1000, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair@alistair23.me>


I would suggest you add some commit log, and have subject like below.

ARM: dts: imx7d-remarkable2: Add WiFi support

> ---

>  arch/arm/boot/dts/imx7d-remarkable2.dts | 91 +++++++++++++++++++++++++

>  1 file changed, 91 insertions(+)

> 

> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts

> index 8cbae656395c..c3dda2b92fe6 100644

> --- a/arch/arm/boot/dts/imx7d-remarkable2.dts

> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts

> @@ -21,6 +21,27 @@ memory@80000000 {

>  		device_type = "memory";

>  		reg = <0x80000000 0x40000000>;

>  	};

> +

> +	reg_brcm: regulator-brcm {

> +		compatible = "regulator-fixed";

> +		regulator-name = "brcm_reg";

> +		regulator-min-microvolt = <3300000>;

> +		regulator-max-microvolt = <3300000>;

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&pinctrl_brcm_reg>;

> +		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;

> +		enable-active-high;

> +		startup-delay-us = <150>;

> +	};

> +

> +	wifi_pwrseq: wifi_pwrseq {

> +		compatible = "mmc-pwrseq-simple";

> +		pinctrl-names = "default";

> +		pinctrl-0 = <&pinctrl_wifi>;

> +		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;

> +		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;

> +		clock-names = "ext_clock";

> +	};

>  };

>  

>  &clks {

> @@ -56,6 +77,27 @@ &usbotg2 {

>  	status = "okay";

>  };

>  

> +&usdhc2 {

> +	#address-cells = <1>;

> +	#size-cells = <0>;

> +	pinctrl-names = "default", "state_100mhz", "sleep";

> +	pinctrl-0 = <&pinctrl_usdhc2>;

> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;


state_200mhz is missing.

Shawn

> +	pinctrl-2 = <&pinctrl_usdhc2>;

> +	mmc-pwrseq = <&wifi_pwrseq>;

> +	vmmc-supply = <&reg_brcm>;

> +	bus-width = <4>;

> +	non-removable;

> +	keep-power-in-suspend;

> +	cap-power-off-card;

> +	status = "okay";

> +

> +	brcmf: bcrmf@1 {

> +		reg = <1>;

> +		compatible = "brcm,bcm4329-fmac";

> +	};

> +};

> +

>  &usdhc3 {

>  	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";

>  	pinctrl-0 = <&pinctrl_usdhc3>;

> @@ -76,6 +118,13 @@ &wdog1 {

>  };

>  

>  &iomuxc {

> +	pinctrl_brcm_reg: brcmreggrp {

> +		fsl,pins = <

> +			/* WIFI_PWR_EN */

> +			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14

> +		>;

> +	};

> +

>  	pinctrl_uart1: uart1grp {

>  		fsl,pins = <

>  			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79

> @@ -90,6 +139,39 @@ MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79

>  		>;

>  	};

>  

> +	pinctrl_usdhc2: usdhc2grp {

> +		fsl,pins = <

> +			MX7D_PAD_SD2_CMD__SD2_CMD		0x59

> +			MX7D_PAD_SD2_CLK__SD2_CLK		0x19

> +			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59

> +			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59

> +			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59

> +			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59

> +		>;

> +	};

> +

> +	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {

> +		fsl,pins = <

> +			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a

> +			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a

> +			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a

> +			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a

> +			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a

> +			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a

> +		>;

> +	};

> +

> +	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {

> +		fsl,pins = <

> +			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b

> +			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b

> +			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b

> +			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b

> +			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b

> +			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b

> +		>;

> +	};

> +

>  	pinctrl_usdhc3: usdhc3grp {

>  		fsl,pins = <

>  			MX7D_PAD_SD3_CMD__SD3_CMD		0x59

> @@ -143,4 +225,13 @@ pinctrl_wdog: wdoggrp {

>  			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74

>  		>;

>  	};

> +

> +	pinctrl_wifi: wifigrp {

> +		fsl,pins = <

> +			/* WiFi Reg On */

> +			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014

> +			/* WiFi Sleep 32k */

> +			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014

> +		>;

> +	};

>  };

> -- 

> 2.31.1

>
Alistair Francis June 15, 2021, 9:46 a.m. UTC | #2
On Thu, May 13, 2021 at 11:35 PM Shawn Guo <shawnguo@kernel.org> wrote:
>

> On Mon, Apr 19, 2021 at 07:00:03AM +1000, Alistair Francis wrote:

> > Signed-off-by: Alistair Francis <alistair@alistair23.me>

>

> I would suggest you add some commit log, and have subject like below.

>

> ARM: dts: imx7d-remarkable2: Add WiFi support


Done!

>

> > ---

> >  arch/arm/boot/dts/imx7d-remarkable2.dts | 91 +++++++++++++++++++++++++

> >  1 file changed, 91 insertions(+)

> >

> > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts

> > index 8cbae656395c..c3dda2b92fe6 100644

> > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts

> > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts

> > @@ -21,6 +21,27 @@ memory@80000000 {

> >               device_type = "memory";

> >               reg = <0x80000000 0x40000000>;

> >       };

> > +

> > +     reg_brcm: regulator-brcm {

> > +             compatible = "regulator-fixed";

> > +             regulator-name = "brcm_reg";

> > +             regulator-min-microvolt = <3300000>;

> > +             regulator-max-microvolt = <3300000>;

> > +             pinctrl-names = "default";

> > +             pinctrl-0 = <&pinctrl_brcm_reg>;

> > +             gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;

> > +             enable-active-high;

> > +             startup-delay-us = <150>;

> > +     };

> > +

> > +     wifi_pwrseq: wifi_pwrseq {

> > +             compatible = "mmc-pwrseq-simple";

> > +             pinctrl-names = "default";

> > +             pinctrl-0 = <&pinctrl_wifi>;

> > +             reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;

> > +             clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;

> > +             clock-names = "ext_clock";

> > +     };

> >  };

> >

> >  &clks {

> > @@ -56,6 +77,27 @@ &usbotg2 {

> >       status = "okay";

> >  };

> >

> > +&usdhc2 {

> > +     #address-cells = <1>;

> > +     #size-cells = <0>;

> > +     pinctrl-names = "default", "state_100mhz", "sleep";

> > +     pinctrl-0 = <&pinctrl_usdhc2>;

> > +     pinctrl-1 = <&pinctrl_usdhc2_100mhz>;

>

> state_200mhz is missing.


Ah, sorry about that. Fixed.

Alistair

>

> Shawn

>

> > +     pinctrl-2 = <&pinctrl_usdhc2>;

> > +     mmc-pwrseq = <&wifi_pwrseq>;

> > +     vmmc-supply = <&reg_brcm>;

> > +     bus-width = <4>;

> > +     non-removable;

> > +     keep-power-in-suspend;

> > +     cap-power-off-card;

> > +     status = "okay";

> > +

> > +     brcmf: bcrmf@1 {

> > +             reg = <1>;

> > +             compatible = "brcm,bcm4329-fmac";

> > +     };

> > +};

> > +

> >  &usdhc3 {

> >       pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";

> >       pinctrl-0 = <&pinctrl_usdhc3>;

> > @@ -76,6 +118,13 @@ &wdog1 {

> >  };

> >

> >  &iomuxc {

> > +     pinctrl_brcm_reg: brcmreggrp {

> > +             fsl,pins = <

> > +                     /* WIFI_PWR_EN */

> > +                     MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13       0x14

> > +             >;

> > +     };

> > +

> >       pinctrl_uart1: uart1grp {

> >               fsl,pins = <

> >                       MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX    0x79

> > @@ -90,6 +139,39 @@ MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                0x79

> >               >;

> >       };

> >

> > +     pinctrl_usdhc2: usdhc2grp {

> > +             fsl,pins = <

> > +                     MX7D_PAD_SD2_CMD__SD2_CMD               0x59

> > +                     MX7D_PAD_SD2_CLK__SD2_CLK               0x19

> > +                     MX7D_PAD_SD2_DATA0__SD2_DATA0           0x59

> > +                     MX7D_PAD_SD2_DATA1__SD2_DATA1           0x59

> > +                     MX7D_PAD_SD2_DATA2__SD2_DATA2           0x59

> > +                     MX7D_PAD_SD2_DATA3__SD2_DATA3           0x59

> > +             >;

> > +     };

> > +

> > +     pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {

> > +             fsl,pins = <

> > +                     MX7D_PAD_SD2_CMD__SD2_CMD               0x5a

> > +                     MX7D_PAD_SD2_CLK__SD2_CLK               0x1a

> > +                     MX7D_PAD_SD2_DATA0__SD2_DATA0           0x5a

> > +                     MX7D_PAD_SD2_DATA1__SD2_DATA1           0x5a

> > +                     MX7D_PAD_SD2_DATA2__SD2_DATA2           0x5a

> > +                     MX7D_PAD_SD2_DATA3__SD2_DATA3           0x5a

> > +             >;

> > +     };

> > +

> > +     pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {

> > +             fsl,pins = <

> > +                     MX7D_PAD_SD2_CMD__SD2_CMD               0x5b

> > +                     MX7D_PAD_SD2_CLK__SD2_CLK               0x1b

> > +                     MX7D_PAD_SD2_DATA0__SD2_DATA0           0x5b

> > +                     MX7D_PAD_SD2_DATA1__SD2_DATA1           0x5b

> > +                     MX7D_PAD_SD2_DATA2__SD2_DATA2           0x5b

> > +                     MX7D_PAD_SD2_DATA3__SD2_DATA3           0x5b

> > +             >;

> > +     };

> > +

> >       pinctrl_usdhc3: usdhc3grp {

> >               fsl,pins = <

> >                       MX7D_PAD_SD3_CMD__SD3_CMD               0x59

> > @@ -143,4 +225,13 @@ pinctrl_wdog: wdoggrp {

> >                       MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY      0x74

> >               >;

> >       };

> > +

> > +     pinctrl_wifi: wifigrp {

> > +             fsl,pins = <

> > +                     /* WiFi Reg On */

> > +                     MX7D_PAD_SD2_CD_B__GPIO5_IO9            0x00000014

> > +                     /* WiFi Sleep 32k */

> > +                     MX7D_PAD_SD1_WP__CCM_CLKO2              0x00000014

> > +             >;

> > +     };

> >  };

> > --

> > 2.31.1

> >
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 8cbae656395c..c3dda2b92fe6 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -21,6 +21,27 @@  memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <150>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
 };
 
 &clks {
@@ -56,6 +77,27 @@  &usbotg2 {
 	status = "okay";
 };
 
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_brcm>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -76,6 +118,13 @@  &wdog1 {
 };
 
 &iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			/* WIFI_PWR_EN */
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
@@ -90,6 +139,39 @@  MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
@@ -143,4 +225,13 @@  pinctrl_wdog: wdoggrp {
 			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
 		>;
 	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WiFi Reg On */
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
+			/* WiFi Sleep 32k */
+			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
+		>;
+	};
 };