@@ -217,6 +217,7 @@ config VIDEO_ADV7180
depends on GPIOLIB && VIDEO_V4L2 && I2C
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
help
Support for the Analog Devices ADV7180 video decoder.
@@ -534,6 +535,7 @@ config VIDEO_ADV7175
config VIDEO_ADV7343
tristate "ADV7343 video encoder"
depends on I2C
+ select V4L2_ASYNC
help
Support for Analog Devices I2C bus based ADV7343 encoder.
@@ -652,6 +654,7 @@ config SDR_MAX2175
tristate "Maxim 2175 RF to Bits tuner"
depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
select REGMAP_I2C
+ select V4L2_ASYNC
help
Support for Maxim 2175 tuner. It is an advanced analog/digital
radio receiver with RF-to-Bits front-end designed for SDR solutions.
@@ -668,6 +671,7 @@ menu "Miscellaneous helper chips"
config VIDEO_THS7303
tristate "THS7303/53 Video Amplifier"
depends on VIDEO_V4L2 && I2C
+ select V4L2_ASYNC
help
Support for TI THS7303/53 video amplifier
@@ -1341,6 +1345,7 @@ config VIDEO_AD5820
tristate "AD5820 lens voice coil support"
depends on GPIOLIB && I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
+ select V4L2_ASYNC
help
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
@@ -1350,6 +1355,7 @@ config VIDEO_AK7375
depends on I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
help
This is a driver for the AK7375 camera lens voice coil.
AK7375 is a 12 bit DAC with 120mA output current sink
@@ -1361,6 +1367,7 @@ config VIDEO_DW9714
depends on I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
help
This is a driver for the DW9714 camera lens voice coil.
DW9714 is a 10 bit DAC with 120mA output current sink
@@ -1384,6 +1391,7 @@ config VIDEO_DW9807_VCM
depends on I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
help
This is a driver for the DW9807 camera lens voice coil.
DW9807 is a 10 bit DAC with 100mA output current sink
@@ -1399,6 +1407,7 @@ config VIDEO_ADP1653
tristate "ADP1653 flash support"
depends on I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
+ select V4L2_ASYNC
help
This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
@@ -1408,6 +1417,7 @@ config VIDEO_LM3560
depends on I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
select REGMAP_I2C
+ select V4L2_ASYNC
help
This is a driver for the lm3560 dual flash controllers. It controls
flash, torch LEDs.
@@ -1417,6 +1427,7 @@ config VIDEO_LM3646
depends on I2C && VIDEO_V4L2
select MEDIA_CONTROLLER
select REGMAP_I2C
+ select V4L2_ASYNC
help
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
@@ -62,6 +62,7 @@ config V4L2_FLASH_LED_CLASS
tristate "V4L2 flash API for LED flash class devices"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on LEDS_CLASS_FLASH
+ select V4L2_ASYNC
help
Say Y here to enable V4L2 flash API support for LED flash
class drivers.
@@ -70,6 +71,10 @@ config V4L2_FLASH_LED_CLASS
config V4L2_FWNODE
tristate
+ select V4L2_ASYNC
+
+config V4L2_ASYNC
+ tristate
# Used by drivers that need Videobuf modules
config VIDEOBUF_GEN
@@ -7,15 +7,16 @@ tuner-objs := tuner-core.o
videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \
v4l2-event.o v4l2-ctrls.o v4l2-subdev.o \
- v4l2-async.o v4l2-common.o
+ v4l2-common.o
videodev-$(CONFIG_COMPAT) += v4l2-compat-ioctl32.o
videodev-$(CONFIG_TRACEPOINTS) += v4l2-trace.o
videodev-$(CONFIG_MEDIA_CONTROLLER) += v4l2-mc.o
videodev-$(CONFIG_SPI) += v4l2-spi.o
videodev-$(CONFIG_VIDEO_V4L2_I2C) += v4l2-i2c.o
-obj-$(CONFIG_V4L2_FWNODE) += v4l2-fwnode.o
obj-$(CONFIG_VIDEO_V4L2) += videodev.o
+obj-$(CONFIG_V4L2_FWNODE) += v4l2-fwnode.o
+obj-$(CONFIG_V4L2_ASYNC) += v4l2-async.o
obj-$(CONFIG_VIDEO_V4L2) += v4l2-dv-timings.o
obj-$(CONFIG_VIDEO_TUNER) += tuner.o
@@ -854,8 +854,27 @@ static int pending_subdevs_show(struct seq_file *s, void *data)
}
DEFINE_SHOW_ATTRIBUTE(pending_subdevs);
-void v4l2_async_debug_init(struct dentry *debugfs_dir)
+static struct dentry *v4l2_async_debugfs_dir;
+
+static int __init v4l2_async_init(void)
{
- debugfs_create_file("pending_async_subdevices", 0444, debugfs_dir, NULL,
+ v4l2_async_debugfs_dir = debugfs_create_dir("v4l2-async", NULL);
+ debugfs_create_file("pending_async_subdevices", 0444,
+ v4l2_async_debugfs_dir, NULL,
&pending_subdevs_fops);
+
+ return 0;
+}
+
+static void __exit v4l2_async_exit(void)
+{
+ debugfs_remove_recursive(v4l2_async_debugfs_dir);
}
+
+subsys_initcall(v4l2_async_init);
+module_exit(v4l2_async_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@linux.intel.com>");
+MODULE_AUTHOR("Ezequiel Garcia <ezequiel@collabora.com>");
+MODULE_LICENSE("GPL");
@@ -39,8 +39,6 @@
__func__, ##arg); \
} while (0)
-static struct dentry *v4l2_debugfs_dir;
-
/*
* sysfs stuff
*/
@@ -1121,8 +1119,6 @@ static int __init videodev_init(void)
return -EIO;
}
- v4l2_debugfs_dir = debugfs_create_dir("video4linux", NULL);
- v4l2_async_debug_init(v4l2_debugfs_dir);
return 0;
}
@@ -1130,7 +1126,6 @@ static void __exit videodev_exit(void)
{
dev_t dev = MKDEV(VIDEO_MAJOR, 0);
- debugfs_remove_recursive(v4l2_debugfs_dir);
class_unregister(&video_class);
unregister_chrdev_region(dev, VIDEO_NUM_DEVICES);
}
The V4L2 async framework is generally used with the V4L2 fwnode, which also depends on the former. There are a few exceptions but they are relatively few. At the same time there is a vast number of systems that need videodev module, but have no use for v4l2-async that's now part of videodev. In order to improve, split the v4l2-async into its own module. Selecting V4L2_FWNODE also selects V4L2_ASYNC. This also moves the initialisation of the debufs entries for async subdevs to loading of the v4l2-async module. The directory is named as "v4l2-async". Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> --- since v2: - Use select to choose V4L2_ASYNC when V4L2_FWNODE is required by the driver (thanks to Ezequiel). - Select V4L2_ASYNC for a few more drivers. - Rework the commit message. drivers/media/i2c/Kconfig | 11 +++++++++++ drivers/media/v4l2-core/Kconfig | 5 +++++ drivers/media/v4l2-core/Makefile | 5 +++-- drivers/media/v4l2-core/v4l2-async.c | 23 +++++++++++++++++++++-- drivers/media/v4l2-core/v4l2-dev.c | 5 ----- 5 files changed, 40 insertions(+), 9 deletions(-)