@@ -152,9 +152,11 @@ static void set_muxconf_regs_essential(void)
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- /* gpio_wk7 is used for controlling TPS on 4460 */
if (omap_revision() >= OMAP4460_ES1_0)
- writew(M3, CONTROL_WKUP_PAD1_FREF_CLK4_REQ);
+ do_set_mux(CONTROL_PADCONF_WKUP,
+ wkup_padconf_array_essential_4460,
+ sizeof(wkup_padconf_array_essential_4460) /
+ sizeof(struct pad_conf_entry));
}
static void set_mux_conf_regs(void)
@@ -73,4 +73,11 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
};
+const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
+
+{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */
+
+};
+
+
#endif /* _OMAP4_MUX_DATA_H_ */
@@ -71,9 +71,26 @@ void set_muxconf_regs_non_essential(void)
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
+ if (omap_revision() < OMAP4460_ES1_0)
+ do_set_mux(CONTROL_PADCONF_CORE,
+ core_padconf_array_non_essential_4430,
+ sizeof(core_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
+ else
+ do_set_mux(CONTROL_PADCONF_CORE,
+ core_padconf_array_non_essential_4460,
+ sizeof(core_padconf_array_non_essential_4460) /
+ sizeof(struct pad_conf_entry));
+
do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
+
+ if (omap_revision() < OMAP4460_ES1_0)
+ do_set_mux(CONTROL_PADCONF_WKUP,
+ wkup_padconf_array_non_essential_4430,
+ sizeof(wkup_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
}
#ifdef CONFIG_GENERIC_MMC
@@ -100,7 +100,6 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
@@ -202,6 +201,14 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
};
+const struct pad_conf_entry core_padconf_array_non_essential_4430[] = {
+ {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
+};
+
+const struct pad_conf_entry core_padconf_array_non_essential_4460[] = {
+ {ABE_MCBSP2_CLKX, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
+};
+
const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
{PAD1_SIM_CLK, (M0)}, /* sim_clk */
@@ -214,7 +221,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
{PAD1_FREF_CLK3_REQ, M7}, /* safe mode */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (PTU | M3)}, /* led status_1 */
{PAD0_FREF_CLK4_OUT, (PTU | M3)}, /* led status_2 */
{PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
{PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
@@ -224,4 +230,8 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
};
+const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = {
+ {PAD1_FREF_CLK4_REQ, (PTU | M3)}, /* led status_1 */
+};
+
#endif /* _PANDA_MUX_DATA_H_ */
Not all padconfs are the same between 4430 and 4460, so instead of working around this with an if, we should have an specific padconf structure for both chips (like handling the differences between the LEDs GPIOs and TPS). Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@linaro.org> 4 files changed, 40 insertions(+), 4 deletions(-)