@@ -11,6 +11,16 @@
#include "netdev.h"
#include "cfg80211.h"
+/*
+ * For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or
+ * more zero bytes between the command response and the DATA Start tag
+ * (0xf3). This behavior appears to be undocumented in "ATWILC1000
+ * USER GUIDE" (https://tinyurl.com/4hhshdts) but we have observed 1-4
+ * zero bytes when the SPI bus operates at 48MHz and none when it
+ * operates at 1MHz.
+ */
+#define WILC_SPI_RSP_HDR_EXTRA_DATA 8
+
struct wilc_spi {
int crc_off;
};
@@ -79,16 +89,15 @@ struct wilc_spi_cmd {
} __packed;
struct wilc_spi_read_rsp_data {
- u8 rsp_cmd_type;
- u8 status;
- u8 resp_header;
- u8 resp_data[4];
+ u8 header;
+ u8 data[4];
u8 crc[];
} __packed;
struct wilc_spi_rsp_data {
u8 rsp_cmd_type;
u8 status;
+ u8 data[];
} __packed;
static int wilc_bus_probe(struct spi_device *spi)
@@ -359,10 +368,11 @@ static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
struct spi_device *spi = to_spi_device(wilc->dev);
struct wilc_spi *spi_priv = wilc->bus_data;
u8 wb[32], rb[32];
- int cmd_len, resp_len;
u8 crc[2];
+ int cmd_len, resp_len, i;
struct wilc_spi_cmd *c;
- struct wilc_spi_read_rsp_data *r;
+ struct wilc_spi_read_rsp_data *r_data;
+ struct wilc_spi_rsp_data *r;
memset(wb, 0x0, sizeof(wb));
memset(rb, 0x0, sizeof(rb));
@@ -384,7 +394,8 @@ static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
}
cmd_len = offsetof(struct wilc_spi_cmd, u.simple_cmd.crc);
- resp_len = sizeof(*r);
+ resp_len = sizeof(*r) + sizeof(*r_data) + WILC_SPI_RSP_HDR_EXTRA_DATA;
+
if (!spi_priv->crc_off) {
c->u.simple_cmd.crc[0] = wilc_get_crc7(wb, cmd_len);
cmd_len += 1;
@@ -403,7 +414,7 @@ static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
return -EINVAL;
}
- r = (struct wilc_spi_read_rsp_data *)&rb[cmd_len];
+ r = (struct wilc_spi_rsp_data *)&rb[cmd_len];
if (r->rsp_cmd_type != cmd) {
dev_err(&spi->dev,
"Failed cmd response, cmd (%02x), resp (%02x)\n",
@@ -417,17 +428,22 @@ static int wilc_spi_single_read(struct wilc *wilc, u8 cmd, u32 adr, void *b,
return -EINVAL;
}
- if (WILC_GET_RESP_HDR_START(r->resp_header) != 0xf) {
- dev_err(&spi->dev, "Error, data read response (%02x)\n",
- r->resp_header);
+ for (i = 0; i < WILC_SPI_RSP_HDR_EXTRA_DATA; ++i)
+ if (WILC_GET_RESP_HDR_START(r->data[i]) == 0xf)
+ break;
+
+ if (i >= WILC_SPI_RSP_HDR_EXTRA_DATA) {
+ dev_err(&spi->dev, "Error, data start missing\n");
return -EINVAL;
}
+ r_data = (struct wilc_spi_read_rsp_data *)&r->data[i];
+
if (b)
- memcpy(b, r->resp_data, 4);
+ memcpy(b, r_data->data, 4);
if (!spi_priv->crc_off)
- memcpy(crc, r->crc, 2);
+ memcpy(crc, r_data->crc, 2);
return 0;
}
For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or more zero bytes between the command response and the DATA Start tag (0xf3). This behavior appears to be undocumented in "ATWILC1000 USER GUIDE" (https://tinyurl.com/4hhshdts) but we have observed 1-4 zero bytes when the SPI bus operates at 48MHz and none when it operates at 1MHz. This code is derived from the equivalent code of the wilc driver in the linux-at91 repository. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> --- drivers/net/wireless/microchip/wilc1000/spi.c | 42 +++++++++++++------ 1 file changed, 29 insertions(+), 13 deletions(-)