new file mode 100644
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip eXtended Image Sensor Controller (XISC)
+
+maintainers:
+ - Eugen Hristev <eugen.hristev@microchip.com>
+
+description: |
+ The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
+ Microchip AT91 SAM family of devices.
+
+ The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
+ The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
+ parallel sensor.
+
+ The XISC provides one clock output that is used to clock the demuxer/bridge.
+
+properties:
+ compatible:
+ const: microchip,sama7g5-isc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: hclock
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names:
+ const: isc-mck
+
+ microchip,mipi-mode:
+ type: boolean
+ description:
+ As the XISC is usually connected to a demux/bridge, the XISC receives
+ the same type of input, however, it should be aware of the type of
+ signals received. The mipi-mode enables different internal handling
+ of the data and clock lines.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input port node, single endpoint describing the input pad.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+
+ properties:
+ bus-type:
+ enum: [5, 6]
+
+ remote-endpoint: true
+
+ bus-width:
+ enum: [8, 9, 10, 11, 12]
+ default: 12
+
+ hsync-active:
+ enum: [0, 1]
+ default: 1
+
+ vsync-active:
+ enum: [0, 1]
+ default: 1
+
+ pclk-sample:
+ enum: [0, 1]
+ default: 1
+
+ required:
+ - remote-endpoint
+ - bus-type
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - clock-output-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ xisc: xisc@e1408000 {
+ compatible = "microchip,sama7g5-isc";
+ reg = <0xe1408000 0x2000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+ clock-names = "hclock";
+ #clock-cells = <0>;
+ clock-output-names = "isc-mck";
+
+ port {
+ xisc_in: endpoint {
+ bus-type = <5>; /* Parallel */
+ remote-endpoint = <&csi2dc_out>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ bus-width = <12>;
+ };
+ };
+ };
+
Add bindings for the Microchip eXtended Image Sensor Controller. Based on the atmel,isc.yaml binding. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- Changes in v5: - fixed license clause to add BSD-2 Changes in v4: - added '|' at description to preserve line breaks .../bindings/media/microchip,xisc.yaml | 129 ++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/microchip,xisc.yaml