Message ID | 20210322033846.39882-1-ran.wang_1@nxp.com |
---|---|
State | Accepted |
Commit | 76c47d1449fc2ad58fec3a4ace45e33c3952720e |
Headers | show |
Series | [v4] gpio: mpc8xxx: Add ACPI support | expand |
Hello, On Monday, March 22, 2021 11:39 AM, Ran Wang wrote: > > Current implementation only supports DT, now add ACPI support. > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > --- > Change in v4: > - Update error print for gpiochip_add_data() to fix wrong info. in ACPI case. > - Update error print for devm_request_irq() to fix panic in ACPI case. > - Add include property.h and mod_devicetable.h. > - Correct error handling for mpc8xxx_gc->regs. > - Replace "!(IS_ERR_OR_NULL(fwnode) || is_of_node(fwnode)))" with "is_acpi_node(fwnode)" Could this version be accepted, or any comment/suggestion? Thanks & Regards, Ran > Change in v3: > - Recover ls1028a and ls1088a compatilbe checking logic > > Change in v2: > - Initialize devtype with NULL to fix compile warning. > - Replace of_device_get_match_data() and acpi_match_device with device_get_match_data(). > - Replace acpi_match_device() with simpler checking logic per Andy's suggestion. > > drivers/gpio/gpio-mpc8xxx.c | 47 ++++++++++++++++++++++++++----------- > 1 file changed, 33 insertions(+), 14 deletions(-) > > diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 6dfca83bcd90..4b9157a69fca 100644 > --- a/drivers/gpio/gpio-mpc8xxx.c > +++ b/drivers/gpio/gpio-mpc8xxx.c > @@ -9,6 +9,7 @@ > * kind, whether express or implied. > */ > > +#include <linux/acpi.h> > #include <linux/kernel.h> > #include <linux/init.h> > #include <linux/spinlock.h> > @@ -18,6 +19,8 @@ > #include <linux/of_address.h> > #include <linux/of_irq.h> > #include <linux/of_platform.h> > +#include <linux/property.h> > +#include <linux/mod_devicetable.h> > #include <linux/slab.h> > #include <linux/irq.h> > #include <linux/gpio/driver.h> > @@ -303,8 +306,8 @@ static int mpc8xxx_probe(struct platform_device *pdev) > struct device_node *np = pdev->dev.of_node; > struct mpc8xxx_gpio_chip *mpc8xxx_gc; > struct gpio_chip *gc; > - const struct mpc8xxx_gpio_devtype *devtype = > - of_device_get_match_data(&pdev->dev); > + const struct mpc8xxx_gpio_devtype *devtype = NULL; > + struct fwnode_handle *fwnode; > int ret; > > mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc), GFP_KERNEL); @@ -315,14 +318,14 @@ static int > mpc8xxx_probe(struct platform_device *pdev) > > raw_spin_lock_init(&mpc8xxx_gc->lock); > > - mpc8xxx_gc->regs = of_iomap(np, 0); > - if (!mpc8xxx_gc->regs) > - return -ENOMEM; > + mpc8xxx_gc->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(mpc8xxx_gc->regs)) > + return PTR_ERR(mpc8xxx_gc->regs); > > gc = &mpc8xxx_gc->gc; > gc->parent = &pdev->dev; > > - if (of_property_read_bool(np, "little-endian")) { > + if (device_property_read_bool(&pdev->dev, "little-endian")) { > ret = bgpio_init(gc, &pdev->dev, 4, > mpc8xxx_gc->regs + GPIO_DAT, > NULL, NULL, > @@ -345,6 +348,7 @@ static int mpc8xxx_probe(struct platform_device *pdev) > > mpc8xxx_gc->direction_output = gc->direction_output; > > + devtype = device_get_match_data(&pdev->dev); > if (!devtype) > devtype = &mpc8xxx_gpio_devtype_default; > > @@ -369,24 +373,29 @@ static int mpc8xxx_probe(struct platform_device *pdev) > * associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate > * the port value to the GPIO Data Register. > */ > + fwnode = dev_fwnode(&pdev->dev); > if (of_device_is_compatible(np, "fsl,qoriq-gpio") || > of_device_is_compatible(np, "fsl,ls1028a-gpio") || > - of_device_is_compatible(np, "fsl,ls1088a-gpio")) > + of_device_is_compatible(np, "fsl,ls1088a-gpio") || > + is_acpi_node(fwnode)) > gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff); > > ret = gpiochip_add_data(gc, mpc8xxx_gc); > if (ret) { > - pr_err("%pOF: GPIO chip registration failed with status %d\n", > - np, ret); > + dev_err(&pdev->dev, > + "GPIO chip registration failed with status %d\n", ret); > goto err; > } > > - mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0); > + mpc8xxx_gc->irqn = platform_get_irq(pdev, 0); > if (!mpc8xxx_gc->irqn) > return 0; > > - mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS, > - &mpc8xxx_gpio_irq_ops, mpc8xxx_gc); > + mpc8xxx_gc->irq = irq_domain_create_linear(fwnode, > + MPC8XXX_GPIO_PINS, > + &mpc8xxx_gpio_irq_ops, > + mpc8xxx_gc); > + > if (!mpc8xxx_gc->irq) > return 0; > > @@ -399,8 +408,9 @@ static int mpc8xxx_probe(struct platform_device *pdev) > IRQF_SHARED, "gpio-cascade", > mpc8xxx_gc); > if (ret) { > - dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n", > - np->full_name, mpc8xxx_gc->irqn, ret); > + dev_err(&pdev->dev, > + "failed to devm_request_irq(%d), ret = %d\n", > + mpc8xxx_gc->irqn, ret); > goto err; > } > > @@ -425,12 +435,21 @@ static int mpc8xxx_remove(struct platform_device *pdev) > return 0; > } > > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id gpio_acpi_ids[] = { > + {"NXP0031",}, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, gpio_acpi_ids); #endif > + > static struct platform_driver mpc8xxx_plat_driver = { > .probe = mpc8xxx_probe, > .remove = mpc8xxx_remove, > .driver = { > .name = "gpio-mpc8xxx", > .of_match_table = mpc8xxx_gpio_ids, > + .acpi_match_table = ACPI_PTR(gpio_acpi_ids), > }, > }; > > -- > 2.25.1
On Mon, Mar 22, 2021 at 5:31 AM Ran Wang <ran.wang_1@nxp.com> wrote: > > Current implementation only supports DT, now add ACPI support. FWIW, Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > --- > Change in v4: > - Update error print for gpiochip_add_data() to fix wrong info. in ACPI case. > - Update error print for devm_request_irq() to fix panic in ACPI case. > - Add include property.h and mod_devicetable.h. > - Correct error handling for mpc8xxx_gc->regs. > - Replace "!(IS_ERR_OR_NULL(fwnode) || is_of_node(fwnode)))" with "is_acpi_node(fwnode)" > > Change in v3: > - Recover ls1028a and ls1088a compatilbe checking logic > > Change in v2: > - Initialize devtype with NULL to fix compile warning. > - Replace of_device_get_match_data() and acpi_match_device with device_get_match_data(). > - Replace acpi_match_device() with simpler checking logic per Andy's suggestion. > > drivers/gpio/gpio-mpc8xxx.c | 47 ++++++++++++++++++++++++++----------- > 1 file changed, 33 insertions(+), 14 deletions(-) > > diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c > index 6dfca83bcd90..4b9157a69fca 100644 > --- a/drivers/gpio/gpio-mpc8xxx.c > +++ b/drivers/gpio/gpio-mpc8xxx.c > @@ -9,6 +9,7 @@ > * kind, whether express or implied. > */ > > +#include <linux/acpi.h> > #include <linux/kernel.h> > #include <linux/init.h> > #include <linux/spinlock.h> > @@ -18,6 +19,8 @@ > #include <linux/of_address.h> > #include <linux/of_irq.h> > #include <linux/of_platform.h> > +#include <linux/property.h> > +#include <linux/mod_devicetable.h> > #include <linux/slab.h> > #include <linux/irq.h> > #include <linux/gpio/driver.h> > @@ -303,8 +306,8 @@ static int mpc8xxx_probe(struct platform_device *pdev) > struct device_node *np = pdev->dev.of_node; > struct mpc8xxx_gpio_chip *mpc8xxx_gc; > struct gpio_chip *gc; > - const struct mpc8xxx_gpio_devtype *devtype = > - of_device_get_match_data(&pdev->dev); > + const struct mpc8xxx_gpio_devtype *devtype = NULL; > + struct fwnode_handle *fwnode; > int ret; > > mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc), GFP_KERNEL); > @@ -315,14 +318,14 @@ static int mpc8xxx_probe(struct platform_device *pdev) > > raw_spin_lock_init(&mpc8xxx_gc->lock); > > - mpc8xxx_gc->regs = of_iomap(np, 0); > - if (!mpc8xxx_gc->regs) > - return -ENOMEM; > + mpc8xxx_gc->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(mpc8xxx_gc->regs)) > + return PTR_ERR(mpc8xxx_gc->regs); > > gc = &mpc8xxx_gc->gc; > gc->parent = &pdev->dev; > > - if (of_property_read_bool(np, "little-endian")) { > + if (device_property_read_bool(&pdev->dev, "little-endian")) { > ret = bgpio_init(gc, &pdev->dev, 4, > mpc8xxx_gc->regs + GPIO_DAT, > NULL, NULL, > @@ -345,6 +348,7 @@ static int mpc8xxx_probe(struct platform_device *pdev) > > mpc8xxx_gc->direction_output = gc->direction_output; > > + devtype = device_get_match_data(&pdev->dev); > if (!devtype) > devtype = &mpc8xxx_gpio_devtype_default; > > @@ -369,24 +373,29 @@ static int mpc8xxx_probe(struct platform_device *pdev) > * associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate > * the port value to the GPIO Data Register. > */ > + fwnode = dev_fwnode(&pdev->dev); > if (of_device_is_compatible(np, "fsl,qoriq-gpio") || > of_device_is_compatible(np, "fsl,ls1028a-gpio") || > - of_device_is_compatible(np, "fsl,ls1088a-gpio")) > + of_device_is_compatible(np, "fsl,ls1088a-gpio") || > + is_acpi_node(fwnode)) > gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff); > > ret = gpiochip_add_data(gc, mpc8xxx_gc); > if (ret) { > - pr_err("%pOF: GPIO chip registration failed with status %d\n", > - np, ret); > + dev_err(&pdev->dev, > + "GPIO chip registration failed with status %d\n", ret); > goto err; > } > > - mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0); > + mpc8xxx_gc->irqn = platform_get_irq(pdev, 0); > if (!mpc8xxx_gc->irqn) > return 0; > > - mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS, > - &mpc8xxx_gpio_irq_ops, mpc8xxx_gc); > + mpc8xxx_gc->irq = irq_domain_create_linear(fwnode, > + MPC8XXX_GPIO_PINS, > + &mpc8xxx_gpio_irq_ops, > + mpc8xxx_gc); > + > if (!mpc8xxx_gc->irq) > return 0; > > @@ -399,8 +408,9 @@ static int mpc8xxx_probe(struct platform_device *pdev) > IRQF_SHARED, "gpio-cascade", > mpc8xxx_gc); > if (ret) { > - dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n", > - np->full_name, mpc8xxx_gc->irqn, ret); > + dev_err(&pdev->dev, > + "failed to devm_request_irq(%d), ret = %d\n", > + mpc8xxx_gc->irqn, ret); > goto err; > } > > @@ -425,12 +435,21 @@ static int mpc8xxx_remove(struct platform_device *pdev) > return 0; > } > > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id gpio_acpi_ids[] = { > + {"NXP0031",}, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, gpio_acpi_ids); > +#endif > + > static struct platform_driver mpc8xxx_plat_driver = { > .probe = mpc8xxx_probe, > .remove = mpc8xxx_remove, > .driver = { > .name = "gpio-mpc8xxx", > .of_match_table = mpc8xxx_gpio_ids, > + .acpi_match_table = ACPI_PTR(gpio_acpi_ids), > }, > }; > > -- > 2.25.1 > -- With Best Regards, Andy Shevchenko
On Tue, Apr 6, 2021 at 3:49 AM Ran Wang <ran.wang_1@nxp.com> wrote: > Could this version be accepted, or any comment/suggestion? Andy says yes, then it is a yes :) FWIW Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On Thu, Apr 8, 2021 at 9:20 AM Linus Walleij <linus.walleij@linaro.org> wrote: > > On Tue, Apr 6, 2021 at 3:49 AM Ran Wang <ran.wang_1@nxp.com> wrote: > > > Could this version be accepted, or any comment/suggestion? > > Andy says yes, then it is a yes :) > FWIW > Acked-by: Linus Walleij <linus.walleij@linaro.org> > > Yours, > Linus Walleij Applied, thanks! Bartosz
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 6dfca83bcd90..4b9157a69fca 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -9,6 +9,7 @@ * kind, whether express or implied. */ +#include <linux/acpi.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -18,6 +19,8 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/property.h> +#include <linux/mod_devicetable.h> #include <linux/slab.h> #include <linux/irq.h> #include <linux/gpio/driver.h> @@ -303,8 +306,8 @@ static int mpc8xxx_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct mpc8xxx_gpio_chip *mpc8xxx_gc; struct gpio_chip *gc; - const struct mpc8xxx_gpio_devtype *devtype = - of_device_get_match_data(&pdev->dev); + const struct mpc8xxx_gpio_devtype *devtype = NULL; + struct fwnode_handle *fwnode; int ret; mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc), GFP_KERNEL); @@ -315,14 +318,14 @@ static int mpc8xxx_probe(struct platform_device *pdev) raw_spin_lock_init(&mpc8xxx_gc->lock); - mpc8xxx_gc->regs = of_iomap(np, 0); - if (!mpc8xxx_gc->regs) - return -ENOMEM; + mpc8xxx_gc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(mpc8xxx_gc->regs)) + return PTR_ERR(mpc8xxx_gc->regs); gc = &mpc8xxx_gc->gc; gc->parent = &pdev->dev; - if (of_property_read_bool(np, "little-endian")) { + if (device_property_read_bool(&pdev->dev, "little-endian")) { ret = bgpio_init(gc, &pdev->dev, 4, mpc8xxx_gc->regs + GPIO_DAT, NULL, NULL, @@ -345,6 +348,7 @@ static int mpc8xxx_probe(struct platform_device *pdev) mpc8xxx_gc->direction_output = gc->direction_output; + devtype = device_get_match_data(&pdev->dev); if (!devtype) devtype = &mpc8xxx_gpio_devtype_default; @@ -369,24 +373,29 @@ static int mpc8xxx_probe(struct platform_device *pdev) * associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate * the port value to the GPIO Data Register. */ + fwnode = dev_fwnode(&pdev->dev); if (of_device_is_compatible(np, "fsl,qoriq-gpio") || of_device_is_compatible(np, "fsl,ls1028a-gpio") || - of_device_is_compatible(np, "fsl,ls1088a-gpio")) + of_device_is_compatible(np, "fsl,ls1088a-gpio") || + is_acpi_node(fwnode)) gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff); ret = gpiochip_add_data(gc, mpc8xxx_gc); if (ret) { - pr_err("%pOF: GPIO chip registration failed with status %d\n", - np, ret); + dev_err(&pdev->dev, + "GPIO chip registration failed with status %d\n", ret); goto err; } - mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0); + mpc8xxx_gc->irqn = platform_get_irq(pdev, 0); if (!mpc8xxx_gc->irqn) return 0; - mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS, - &mpc8xxx_gpio_irq_ops, mpc8xxx_gc); + mpc8xxx_gc->irq = irq_domain_create_linear(fwnode, + MPC8XXX_GPIO_PINS, + &mpc8xxx_gpio_irq_ops, + mpc8xxx_gc); + if (!mpc8xxx_gc->irq) return 0; @@ -399,8 +408,9 @@ static int mpc8xxx_probe(struct platform_device *pdev) IRQF_SHARED, "gpio-cascade", mpc8xxx_gc); if (ret) { - dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n", - np->full_name, mpc8xxx_gc->irqn, ret); + dev_err(&pdev->dev, + "failed to devm_request_irq(%d), ret = %d\n", + mpc8xxx_gc->irqn, ret); goto err; } @@ -425,12 +435,21 @@ static int mpc8xxx_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_ACPI +static const struct acpi_device_id gpio_acpi_ids[] = { + {"NXP0031",}, + { } +}; +MODULE_DEVICE_TABLE(acpi, gpio_acpi_ids); +#endif + static struct platform_driver mpc8xxx_plat_driver = { .probe = mpc8xxx_probe, .remove = mpc8xxx_remove, .driver = { .name = "gpio-mpc8xxx", .of_match_table = mpc8xxx_gpio_ids, + .acpi_match_table = ACPI_PTR(gpio_acpi_ids), }, };
Current implementation only supports DT, now add ACPI support. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> --- Change in v4: - Update error print for gpiochip_add_data() to fix wrong info. in ACPI case. - Update error print for devm_request_irq() to fix panic in ACPI case. - Add include property.h and mod_devicetable.h. - Correct error handling for mpc8xxx_gc->regs. - Replace "!(IS_ERR_OR_NULL(fwnode) || is_of_node(fwnode)))" with "is_acpi_node(fwnode)" Change in v3: - Recover ls1028a and ls1088a compatilbe checking logic Change in v2: - Initialize devtype with NULL to fix compile warning. - Replace of_device_get_match_data() and acpi_match_device with device_get_match_data(). - Replace acpi_match_device() with simpler checking logic per Andy's suggestion. drivers/gpio/gpio-mpc8xxx.c | 47 ++++++++++++++++++++++++++----------- 1 file changed, 33 insertions(+), 14 deletions(-)