Message ID | 1568107824b071265b5fc3a195a1d91089ad617a.1617834404.git.gurus@codeaurora.org |
---|---|
State | New |
Headers | show |
Series | [1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8008 support | expand |
On Wed 07 Apr 17:34 CDT 2021, Guru Das Srinagesh wrote: > Add support for the PM8008 GPIO support to the Qualcomm PMIC GPIO > binding. > > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> > --- > Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > index 70e119b..1818481 100644 > --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > @@ -36,6 +36,7 @@ PMIC's from Qualcomm. > "qcom,pm6150-gpio" > "qcom,pm6150l-gpio" > "qcom,pmx55-gpio" > + "qcom,pm8008-gpio" Please keep these sorted alphabetically (i.e. '8' < 'x') With that Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > > And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" > if the device is on an spmi bus or an ssbi bus respectively > @@ -125,6 +126,7 @@ to specify in a pin configuration subnode: > gpio1-gpio12 for pm6150l > gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 > and gpio11) > + gpio1-gpio2 for pm8008 > > - function: > Usage: required > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On Wed 07 Apr 17:35 CDT 2021, Guru Das Srinagesh wrote: > Add support for the two GPIOs present on PM8008. > > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> > --- > drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > index c2b9f2e..76e997a 100644 > --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c > @@ -1137,6 +1137,7 @@ static const struct of_device_id pmic_gpio_of_match[] = { > { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, > /* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */ > { .compatible = "qcom,pmx55-gpio", .data = (void *) 11 }, > + { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 }, As with the binding, please keep these sorted alphabetically. With that: Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > { }, > }; > > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 70e119b..1818481 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -36,6 +36,7 @@ PMIC's from Qualcomm. "qcom,pm6150-gpio" "qcom,pm6150l-gpio" "qcom,pmx55-gpio" + "qcom,pm8008-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively @@ -125,6 +126,7 @@ to specify in a pin configuration subnode: gpio1-gpio12 for pm6150l gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) + gpio1-gpio2 for pm8008 - function: Usage: required
Add support for the PM8008 GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> --- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++ 1 file changed, 2 insertions(+)