mbox series

[v2,00/13] Support Pensando Elba SoC

Message ID 20210329015938.20316-1-brad@pensando.io
Headers show
Series Support Pensando Elba SoC | expand

Message

Brad Larson March 29, 2021, 1:59 a.m. UTC
This series enables support for Pensando Elba SoC based platforms.
The Elba SoC has the following features:

- Sixteen ARM64 A72 cores
- Dual DDR 4/5 memory controllers
- 32 lanes of PCIe Gen3/4 to the Host
- Network interfaces: Dual 200GE, Quad 100GE, 50GE, 25GE, 10GE and
  also a single 1GE management port.
- Storage/crypto offloads and 144 programmable P4 cores.
- QSPI and EMMC for SoC storage
- Two SPI interfaces for peripheral management
- I2C bus for platform management

See below for an overview of changes since v1.

== Patch overview ==

- 01    Fix typo, return code value and log message.
- 03    Remove else clause, intrinsic DW chip-select is never used.
- 08-11 Split out dts and bindings to sub-patches
- 10    Converted existing cadence-quadspi.txt to YAML schema
- 13    New driver should use <linux/gpio/driver.h>

Brad Larson (13):
  gpio: Add Elba SoC gpio driver for spi cs control
  spi: cadence-quadspi: Add QSPI support for Pensando Elba SoC
  spi: dw: Add support for Pensando Elba SoC SPI
  spidev: Add Pensando CPLD compatible
  mmc: sdhci-cadence: Add Pensando Elba SoC support
  arm64: Add config for Pensando SoC platforms
  arm64: dts: Add Pensando Elba SoC support
  dt-bindings: Add pensando vendor prefix
  dt-bindings: mmc: Add Pensando Elba SoC binding
  dt-bindings: spi: cadence-qspi: Add support for Pensando Elba SoC
  dt-bindings: gpio: Add Pensando Elba SoC support
  MAINTAINERS: Add entry for PENSANDO
  gpio: Use linux/gpio/driver.h

 .../bindings/gpio/pensando,elba-spics.yaml    |  50 +++
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |   1 +
 .../bindings/spi/cadence-quadspi.txt          |  68 ----
 .../bindings/spi/cadence-quadspi.yaml         | 153 +++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   9 +
 arch/arm64/Kconfig.platforms                  |   5 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/pensando/Makefile         |   6 +
 arch/arm64/boot/dts/pensando/elba-16core.dtsi | 170 ++++++++++
 .../boot/dts/pensando/elba-asic-common.dtsi   | 112 +++++++
 arch/arm64/boot/dts/pensando/elba-asic.dts    |   7 +
 .../boot/dts/pensando/elba-flash-parts.dtsi   |  78 +++++
 arch/arm64/boot/dts/pensando/elba.dtsi        | 310 ++++++++++++++++++
 drivers/gpio/Kconfig                          |   6 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-elba-spics.c                | 113 +++++++
 drivers/mmc/host/Kconfig                      |  15 +
 drivers/mmc/host/Makefile                     |   1 +
 drivers/mmc/host/sdhci-cadence-elba.c         | 137 ++++++++
 drivers/mmc/host/sdhci-cadence.c              |  81 +++--
 drivers/mmc/host/sdhci-cadence.h              |  68 ++++
 drivers/spi/spi-cadence-quadspi.c             |   9 +
 drivers/spi/spi-dw-mmio.c                     |  28 +-
 drivers/spi/spidev.c                          |   1 +
 25 files changed, 1321 insertions(+), 111 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/pensando,elba-spics.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
 create mode 100644 arch/arm64/boot/dts/pensando/Makefile
 create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts
 create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi
 create mode 100644 drivers/gpio/gpio-elba-spics.c
 create mode 100644 drivers/mmc/host/sdhci-cadence-elba.c
 create mode 100644 drivers/mmc/host/sdhci-cadence.h

Comments

Serge Semin March 31, 2021, 4:17 p.m. UTC | #1
Hi Brad

On Sun, Mar 28, 2021 at 06:59:25PM -0700, Brad Larson wrote:
> This series enables support for Pensando Elba SoC based platforms.

> The Elba SoC has the following features:

> 

> - Sixteen ARM64 A72 cores

> - Dual DDR 4/5 memory controllers

> - 32 lanes of PCIe Gen3/4 to the Host

> - Network interfaces: Dual 200GE, Quad 100GE, 50GE, 25GE, 10GE and

>   also a single 1GE management port.

> - Storage/crypto offloads and 144 programmable P4 cores.

> - QSPI and EMMC for SoC storage

> - Two SPI interfaces for peripheral management

> - I2C bus for platform management

> 

> See below for an overview of changes since v1.

> 

> == Patch overview ==

> 

> - 01    Fix typo, return code value and log message.

> - 03    Remove else clause, intrinsic DW chip-select is never used.

> - 08-11 Split out dts and bindings to sub-patches

> - 10    Converted existing cadence-quadspi.txt to YAML schema

> - 13    New driver should use <linux/gpio/driver.h>


That would be super-useful if each changelog entry was also added to the
individual patches below "---" splitter.

-Sergey

> 

> Brad Larson (13):

>   gpio: Add Elba SoC gpio driver for spi cs control

>   spi: cadence-quadspi: Add QSPI support for Pensando Elba SoC

>   spi: dw: Add support for Pensando Elba SoC SPI

>   spidev: Add Pensando CPLD compatible

>   mmc: sdhci-cadence: Add Pensando Elba SoC support

>   arm64: Add config for Pensando SoC platforms

>   arm64: dts: Add Pensando Elba SoC support

>   dt-bindings: Add pensando vendor prefix

>   dt-bindings: mmc: Add Pensando Elba SoC binding

>   dt-bindings: spi: cadence-qspi: Add support for Pensando Elba SoC

>   dt-bindings: gpio: Add Pensando Elba SoC support

>   MAINTAINERS: Add entry for PENSANDO

>   gpio: Use linux/gpio/driver.h

> 

>  .../bindings/gpio/pensando,elba-spics.yaml    |  50 +++

>  .../devicetree/bindings/mmc/cdns,sdhci.yaml   |   1 +

>  .../bindings/spi/cadence-quadspi.txt          |  68 ----

>  .../bindings/spi/cadence-quadspi.yaml         | 153 +++++++++

>  .../devicetree/bindings/vendor-prefixes.yaml  |   2 +

>  MAINTAINERS                                   |   9 +

>  arch/arm64/Kconfig.platforms                  |   5 +

>  arch/arm64/boot/dts/Makefile                  |   1 +

>  arch/arm64/boot/dts/pensando/Makefile         |   6 +

>  arch/arm64/boot/dts/pensando/elba-16core.dtsi | 170 ++++++++++

>  .../boot/dts/pensando/elba-asic-common.dtsi   | 112 +++++++

>  arch/arm64/boot/dts/pensando/elba-asic.dts    |   7 +

>  .../boot/dts/pensando/elba-flash-parts.dtsi   |  78 +++++

>  arch/arm64/boot/dts/pensando/elba.dtsi        | 310 ++++++++++++++++++

>  drivers/gpio/Kconfig                          |   6 +

>  drivers/gpio/Makefile                         |   1 +

>  drivers/gpio/gpio-elba-spics.c                | 113 +++++++

>  drivers/mmc/host/Kconfig                      |  15 +

>  drivers/mmc/host/Makefile                     |   1 +

>  drivers/mmc/host/sdhci-cadence-elba.c         | 137 ++++++++

>  drivers/mmc/host/sdhci-cadence.c              |  81 +++--

>  drivers/mmc/host/sdhci-cadence.h              |  68 ++++

>  drivers/spi/spi-cadence-quadspi.c             |   9 +

>  drivers/spi/spi-dw-mmio.c                     |  28 +-

>  drivers/spi/spidev.c                          |   1 +

>  25 files changed, 1321 insertions(+), 111 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/gpio/pensando,elba-spics.yaml

>  delete mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.txt

>  create mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml

>  create mode 100644 arch/arm64/boot/dts/pensando/Makefile

>  create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi

>  create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi

>  create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts

>  create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi

>  create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi

>  create mode 100644 drivers/gpio/gpio-elba-spics.c

>  create mode 100644 drivers/mmc/host/sdhci-cadence-elba.c

>  create mode 100644 drivers/mmc/host/sdhci-cadence.h

> 

> -- 

> 2.17.1

>
Brad Larson Aug. 23, 2021, 1:18 a.m. UTC | #2
Hi Sergey,

On Wed, Mar 31, 2021 at 9:17 AM Serge Semin <fancer.lancer@gmail.com> wrote:
>
> Hi Brad
>
> On Sun, Mar 28, 2021 at 06:59:25PM -0700, Brad Larson wrote:
> > This series enables support for Pensando Elba SoC based platforms.
> > The Elba SoC has the following features:
[...]
> > See below for an overview of changes since v1.
> >
> > == Patch overview ==
> >
> > - 01    Fix typo, return code value and log message.
> > - 03    Remove else clause, intrinsic DW chip-select is never used.
> > - 08-11 Split out dts and bindings to sub-patches
> > - 10    Converted existing cadence-quadspi.txt to YAML schema
> > - 13    New driver should use <linux/gpio/driver.h>
>
> That would be super-useful if each changelog entry was also added to the
> individual patches below "---" splitter.

I'll do that for the v3 patchset once the discussions are resolved.

Regards,
Brad