Message ID | 1616409015-27682-1-git-send-email-mkshah@codeaurora.org |
---|---|
State | New |
Headers | show |
Series | [v2] dt-bindings: interrupt-controller: Convert bindings to yaml for qcom,pdc | expand |
Quoting Maulik Shah (2021-03-22 03:30:15) > -- qcom,pdc-ranges: > - Usage: required > - Value type: <u32 array> > - Definition: Specifies the PDC pin offset and the number of PDC ports. > - The tuples indicates the valid mapping of valid PDC ports > - and their hwirq mapping. > - The first element of the tuple is the starting PDC port. > - The second element is the GIC hwirq number for the PDC port. > - The third element is the number of interrupts in sequence. > - > diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml > new file mode 100644 > index 0000000..8b4151c > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml > @@ -0,0 +1,96 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. PDC interrupt controller > + > +maintainers: > + - Maulik Shah <mkshah@codeaurora.org> > + > +description: | > + Qualcomm Technologies, Inc. SoCs based on the RPM Hardened architecture have a > + Power Domain Controller (PDC) that is on always-on domain. In addition to > + providing power control for the power domains, the hardware also has an > + interrupt controller that can be used to help detect edge low interrupts as > + well detect interrupts when the GIC is non-operational. > + > + GIC is parent interrupt controller at the highest level. Platform interrupt > + controller PDC is next in hierarchy, followed by others. Drivers requiring > + wakeup capabilities of their device interrupts routed through the PDC, must > + specify PDC as their interrupt controller and request the PDC port associated > + with the GIC interrupt. See example below. > + > +properties: > + compatible: > + items: > + - enum: > + # Should contain "qcom,<soc>-pdc" and "qcom,pdc" > + - qcom,sc7180-pdc #For SC7180 > + - qcom,sc7280-pdc #For SC7280 > + - qcom,sdm845-pdc #For SDM845 > + - qcom,sm8250-pdc #For SM8250 > + - qcom,sm8350-pdc #For SM8350 > + - const: qcom,pdc > + > + reg: > + description: | > + Specifies the base physical address for PDC hardware followed by optional > + PDC's GIC interface registers that need to be configured for wakeup capable > + GPIOs routed to the PDC. > + minItems: 1 > + maxItems: 2 Can this be items: - description: base registers - description: wakeup configuration registers and then we should always have both registers? > + > + '#interrupt-cells': > + # Specifies the number of cells needed to encode an interrupt. > + # The first element of the tuple is the PDC pin for the interrupt. > + # The second element is the trigger type. > + const: 2 > + > + interrupt-controller: true > + > + qcom,pdc-ranges: > + description: | > + Specifies the PDC pin offset and the number of PDC ports. > + The tuples indicates the valid mapping of valid PDC ports > + and their hwirq mapping. > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + items: > + items: > + - description: | > + "a" The first element of the tuple is the starting PDC port. > + - description: | > + "b" The second element is the GIC SPI number for the PDC port. > + - description: | > + "c" The third element is the number of interrupts in sequence. Do we need the "a", "b", "c" prefixes? Is there any minItems or maxItems that can be placed on this? > + > +required: > + - compatible > + - reg > + - '#interrupt-cells' > + - interrupt-controller > + - qcom,pdc-ranges > + > +additionalProperties: false
On Mon, Mar 22, 2021 at 04:00:15PM +0530, Maulik Shah wrote: > This change converts PDC interrupt controller bindings to yaml. > > Cc: devicetree@vger.kernel.org > Signed-off-by: Maulik Shah <mkshah@codeaurora.org> > --- > This change depends on [1] which adds sc7280 compatible for PDC > > Changes in v2: > - Document optional PDC's GIC interface reg > - Update example to mention optional reg. > > [1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=449725 > --- > .../bindings/interrupt-controller/qcom,pdc.txt | 76 ----------------- > .../bindings/interrupt-controller/qcom,pdc.yaml | 96 ++++++++++++++++++++++ > 2 files changed, 96 insertions(+), 76 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml > index 0000000..8b4151c > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml > @@ -0,0 +1,96 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. PDC interrupt controller > + > +maintainers: > + - Maulik Shah <mkshah@codeaurora.org> > + > +description: | > + Qualcomm Technologies, Inc. SoCs based on the RPM Hardened architecture have a > + Power Domain Controller (PDC) that is on always-on domain. In addition to > + providing power control for the power domains, the hardware also has an > + interrupt controller that can be used to help detect edge low interrupts as > + well detect interrupts when the GIC is non-operational. > + > + GIC is parent interrupt controller at the highest level. Platform interrupt > + controller PDC is next in hierarchy, followed by others. Drivers requiring > + wakeup capabilities of their device interrupts routed through the PDC, must > + specify PDC as their interrupt controller and request the PDC port associated > + with the GIC interrupt. See example below. > + > +properties: > + compatible: > + items: > + - enum: > + # Should contain "qcom,<soc>-pdc" and "qcom,pdc" > + - qcom,sc7180-pdc #For SC7180 > + - qcom,sc7280-pdc #For SC7280 > + - qcom,sdm845-pdc #For SDM845 > + - qcom,sm8250-pdc #For SM8250 > + - qcom,sm8350-pdc #For SM8350 > + - const: qcom,pdc > + > + reg: > + description: | > + Specifies the base physical address for PDC hardware followed by optional > + PDC's GIC interface registers that need to be configured for wakeup capable > + GPIOs routed to the PDC. > + minItems: 1 > + maxItems: 2 > + > + '#interrupt-cells': > + # Specifies the number of cells needed to encode an interrupt. That's every #interrupt-cells. No need to redefine it here. > + # The first element of the tuple is the PDC pin for the interrupt. > + # The second element is the trigger type. 'description', not a comment. > + const: 2 > + > + interrupt-controller: true > + > + qcom,pdc-ranges: > + description: | > + Specifies the PDC pin offset and the number of PDC ports. > + The tuples indicates the valid mapping of valid PDC ports > + and their hwirq mapping. > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + items: > + items: Indentation is wrong. Is there no maximum number of entries? > + - description: | > + "a" The first element of the tuple is the starting PDC port. > + - description: | > + "b" The second element is the GIC SPI number for the PDC port. > + - description: | > + "c" The third element is the number of interrupts in sequence. > + > +required: > + - compatible > + - reg > + - '#interrupt-cells' > + - interrupt-controller > + - qcom,pdc-ranges > + > +additionalProperties: false > + > +examples: > + - | > + pdc: interrupt-controller@b220000 { > + compatible = "qcom,sdm845-pdc", "qcom,pdc"; > + reg = <0xb220000 0x30000>, <0x17c000f0 0x60>; > + qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; > + #interrupt-cells = <2>; > + interrupt-parent = <&intc>; > + interrupt-controller; > + }; > + > + # DT binding of a device that wants to use the GIC SPI 514 as a wakeup > + # interrupt, must do - > + # wake-device { > + # interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; > + # }; > + > + # In this case interrupt 514 would be mapped to port 2 on the PDC as defined > + # by the qcom,pdc-ranges property. > +... > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt deleted file mode 100644 index 98d89e5..0000000 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt +++ /dev/null @@ -1,76 +0,0 @@ -PDC interrupt controller - -Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a -Power Domain Controller (PDC) that is on always-on domain. In addition to -providing power control for the power domains, the hardware also has an -interrupt controller that can be used to help detect edge low interrupts as -well detect interrupts when the GIC is non-operational. - -GIC is parent interrupt controller at the highest level. Platform interrupt -controller PDC is next in hierarchy, followed by others. Drivers requiring -wakeup capabilities of their device interrupts routed through the PDC, must -specify PDC as their interrupt controller and request the PDC port associated -with the GIC interrupt. See example below. - -Properties: - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc" - - "qcom,sc7180-pdc": For SC7180 - - "qcom,sc7280-pdc": For SC7280 - - "qcom,sdm845-pdc": For SDM845 - - "qcom,sdm8250-pdc": For SM8250 - - "qcom,sdm8350-pdc": For SM8350 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the base physical address for PDC hardware. - -- interrupt-cells: - Usage: required - Value type: <u32> - Definition: Specifies the number of cells needed to encode an interrupt - source. - Must be 2. - The first element of the tuple is the PDC pin for the - interrupt. - The second element is the trigger type. - -- interrupt-controller: - Usage: required - Value type: <bool> - Definition: Identifies the node as an interrupt controller. - -- qcom,pdc-ranges: - Usage: required - Value type: <u32 array> - Definition: Specifies the PDC pin offset and the number of PDC ports. - The tuples indicates the valid mapping of valid PDC ports - and their hwirq mapping. - The first element of the tuple is the starting PDC port. - The second element is the GIC hwirq number for the PDC port. - The third element is the number of interrupts in sequence. - -Example: - - pdc: interrupt-controller@b220000 { - compatible = "qcom,sdm845-pdc"; - reg = <0xb220000 0x30000>; - qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; - -DT binding of a device that wants to use the GIC SPI 514 as a wakeup -interrupt, must do - - - wake-device { - interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; - }; - -In this case interrupt 514 would be mapped to port 2 on the PDC as defined by -the qcom,pdc-ranges property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml new file mode 100644 index 0000000..8b4151c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PDC interrupt controller + +maintainers: + - Maulik Shah <mkshah@codeaurora.org> + +description: | + Qualcomm Technologies, Inc. SoCs based on the RPM Hardened architecture have a + Power Domain Controller (PDC) that is on always-on domain. In addition to + providing power control for the power domains, the hardware also has an + interrupt controller that can be used to help detect edge low interrupts as + well detect interrupts when the GIC is non-operational. + + GIC is parent interrupt controller at the highest level. Platform interrupt + controller PDC is next in hierarchy, followed by others. Drivers requiring + wakeup capabilities of their device interrupts routed through the PDC, must + specify PDC as their interrupt controller and request the PDC port associated + with the GIC interrupt. See example below. + +properties: + compatible: + items: + - enum: + # Should contain "qcom,<soc>-pdc" and "qcom,pdc" + - qcom,sc7180-pdc #For SC7180 + - qcom,sc7280-pdc #For SC7280 + - qcom,sdm845-pdc #For SDM845 + - qcom,sm8250-pdc #For SM8250 + - qcom,sm8350-pdc #For SM8350 + - const: qcom,pdc + + reg: + description: | + Specifies the base physical address for PDC hardware followed by optional + PDC's GIC interface registers that need to be configured for wakeup capable + GPIOs routed to the PDC. + minItems: 1 + maxItems: 2 + + '#interrupt-cells': + # Specifies the number of cells needed to encode an interrupt. + # The first element of the tuple is the PDC pin for the interrupt. + # The second element is the trigger type. + const: 2 + + interrupt-controller: true + + qcom,pdc-ranges: + description: | + Specifies the PDC pin offset and the number of PDC ports. + The tuples indicates the valid mapping of valid PDC ports + and their hwirq mapping. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "a" The first element of the tuple is the starting PDC port. + - description: | + "b" The second element is the GIC SPI number for the PDC port. + - description: | + "c" The third element is the number of interrupts in sequence. + +required: + - compatible + - reg + - '#interrupt-cells' + - interrupt-controller + - qcom,pdc-ranges + +additionalProperties: false + +examples: + - | + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0xb220000 0x30000>, <0x17c000f0 0x60>; + qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + # DT binding of a device that wants to use the GIC SPI 514 as a wakeup + # interrupt, must do - + # wake-device { + # interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; + # }; + + # In this case interrupt 514 would be mapped to port 2 on the PDC as defined + # by the qcom,pdc-ranges property. +...
This change converts PDC interrupt controller bindings to yaml. Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <mkshah@codeaurora.org> --- This change depends on [1] which adds sc7280 compatible for PDC Changes in v2: - Document optional PDC's GIC interface reg - Update example to mention optional reg. [1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=449725 --- .../bindings/interrupt-controller/qcom,pdc.txt | 76 ----------------- .../bindings/interrupt-controller/qcom,pdc.yaml | 96 ++++++++++++++++++++++ 2 files changed, 96 insertions(+), 76 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml