| Message ID | 20210304034141.7062-8-brad@pensando.io |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Support Pensando Elba SoC | expand |
On 04/03/2021 04:41, Brad Larson wrote: > Add Pensando common and Elba SoC specific device nodes > and corresponding binding documentation. > > Signed-off-by: Brad Larson <brad@pensando.io> > --- > .../bindings/gpio/pensando,elba-spics.txt | 24 ++ > .../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- > .../bindings/spi/cadence-quadspi.txt | 1 + > .../devicetree/bindings/vendor-prefixes.yaml | 2 + Hi, dt-bindings go always to separate patches, at beginning of patchset. > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/pensando/Makefile | 6 + > arch/arm64/boot/dts/pensando/elba-16core.dtsi | 171 ++++++++++ > .../boot/dts/pensando/elba-asic-common.dtsi | 113 +++++++ > arch/arm64/boot/dts/pensando/elba-asic.dts | 8 + > .../boot/dts/pensando/elba-flash-parts.dtsi | 80 +++++ > arch/arm64/boot/dts/pensando/elba.dtsi | 310 ++++++++++++++++++ You need the board/vendor YAML file. See: Documentation/devicetree/bindings/arm/ > 11 files changed, 717 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt > create mode 100644 arch/arm64/boot/dts/pensando/Makefile > create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts > create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi > create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi > > diff --git a/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt > new file mode 100644 > index 000000000000..30f5f3275238 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt > @@ -0,0 +1,24 @@ > +Pensando Elba SPI Chip Select Driver > + > +The Pensando Elba ASIC provides four SPI bus chip selects > + > +Required properties: > +- compatible: Should be "pensando,elba-spics" > +- reg: Address range of spics controller > +- gpio-controller: Marks the device node as gpio controller > +- #gpio-cells: Must be 2 > + > +Example: > +------- > +spics: spics@307c2468 { > + compatible = "pensando,elba-spics"; > + reg = <0x0 0x307c2468 0x0 0x4>; > + gpio-controller; > + #gpio-cells = <2>; > +}; > + > +&spi0 { > + num-cs = <4>; > + cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>; > + ... > +} > diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml > index af7442f73881..645ae696ba24 100644 > --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml > +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml > @@ -122,7 +122,7 @@ unevaluatedProperties: false > examples: > - | > emmc: mmc@5a000000 { > - compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; > + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc", "pensando,elba-emmc"; Why are you doing this? > reg = <0x5a000000 0x400>; > interrupts = <0 78 4>; > clocks = <&clk 4>; > diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt > index 8ace832a2d80..dbb346b2b1d7 100644 > --- a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt > +++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt > @@ -6,6 +6,7 @@ Required properties: > For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". > For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor". > For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor". > + For Pensando SoC - "pensando,cdns-qspi". > - reg : Contains two entries, each of which is a tuple consisting of a > physical address and length. The first entry is the address and > length of the controller register set. The second entry is the > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index f6064d84a424..9a21d780c5e1 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -850,6 +850,8 @@ patternProperties: > description: Parallax Inc. > "^pda,.*": > description: Precision Design Associates, Inc. > + "^pensando,.*": > + description: Pensando Systems Inc. > "^pericom,.*": > description: Pericom Technology Inc. > "^pervasive,.*": > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index f1173cd93594..c85db0a097fe 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -19,6 +19,7 @@ subdir-y += marvell > subdir-y += mediatek > subdir-y += microchip > subdir-y += nvidia > +subdir-y += pensando > subdir-y += qcom > subdir-y += realtek > subdir-y += renesas > diff --git a/arch/arm64/boot/dts/pensando/Makefile b/arch/arm64/boot/dts/pensando/Makefile > new file mode 100644 > index 000000000000..0c2c0961e64a > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_ARCH_PENSANDO_ELBA_SOC) += elba-asic.dtb > + > +always-y := $(dtb-y) > +subdir-y := $(dts-dirs) > +clean-files := *.dtb > diff --git a/arch/arm64/boot/dts/pensando/elba-16core.dtsi b/arch/arm64/boot/dts/pensando/elba-16core.dtsi > new file mode 100644 > index 000000000000..b0386864cfec > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba-16core.dtsi > @@ -0,0 +1,171 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/ { > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { cpu = <&cpu0>; }; > + core1 { cpu = <&cpu1>; }; > + core2 { cpu = <&cpu2>; }; > + core3 { cpu = <&cpu3>; }; > + }; > + cluster1 { > + core0 { cpu = <&cpu4>; }; > + core1 { cpu = <&cpu5>; }; > + core2 { cpu = <&cpu6>; }; > + core3 { cpu = <&cpu7>; }; > + }; > + cluster2 { > + core0 { cpu = <&cpu8>; }; > + core1 { cpu = <&cpu9>; }; > + core2 { cpu = <&cpu10>; }; > + core3 { cpu = <&cpu11>; }; > + }; > + cluster3 { > + core0 { cpu = <&cpu12>; }; > + core1 { cpu = <&cpu13>; }; > + core2 { cpu = <&cpu14>; }; > + core3 { cpu = <&cpu15>; }; > + }; > + }; > + > + // CLUSTER 0 > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x0>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_0>; > + }; > + cpu1: cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x1>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_0>; > + }; > + cpu2: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x2>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_0>; > + }; > + cpu3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x3>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_0>; > + }; > + > + l2_0: l2-cache0 { > + compatible = "cache"; > + }; > + > + // CLUSTER 1 > + cpu4: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x100>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_1>; > + }; > + cpu5: cpu@101 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x101>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_1>; > + }; > + cpu6: cpu@102 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x102>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_1>; > + }; > + cpu7: cpu@103 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x103>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_1>; > + }; > + > + l2_1: l2-cache1 { > + compatible = "cache"; > + }; > + > + // CLUSTER 2 > + cpu8: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x200>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_2>; > + }; > + cpu9: cpu@201 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x201>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_2>; > + }; > + cpu10: cpu@202 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x202>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_2>; > + }; > + cpu11: cpu@203 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x203>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_2>; > + }; > + > + l2_2: l2-cache2 { > + compatible = "cache"; > + }; > + > + // CLUSTER 3 > + cpu12: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x300>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_3>; > + }; > + cpu13: cpu@301 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x301>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_3>; > + }; > + cpu14: cpu@302 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x302>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_3>; > + }; > + cpu15: cpu@303 { > + device_type = "cpu"; > + compatible = "arm,cortex-a72", "arm,armv8"; > + reg = <0 0x303>; > + enable-method = "spin-table"; > + next-level-cache = <&l2_3>; > + }; > + > + l2_3: l2-cache3 { > + compatible = "cache"; > + }; Run the dtbs_check and build dtbs with W=1 - no warnings are usually expected. > + }; > +}; > diff --git a/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > new file mode 100644 > index 000000000000..9623df208131 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi > @@ -0,0 +1,113 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/ { > + model = "Elba ASIC Board"; > + > + aliases { > + serial0 = &uart0; > + spi0 = &spi0; > + spi1 = &qspi; > + }; > + > + chosen { > + stdout-path = "serial0:19200n8"; > + }; > +}; > + > +&ahb_clk { > + clock-frequency = <400000000>; > +}; > + > +&emmc_clk { > + clock-frequency = <200000000>; > +}; > + > +&flash_clk { > + clock-frequency = <400000000>; > +}; > + > +&ref_clk { > + clock-frequency = <156250000>; > +}; > + > +&qspi { > + status = "okay"; > + flash0: mt25q@0 { > + compatible = "jdec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <40000000>; > + spi-rx-bus-width = <2>; > + m25p,fast-read; > + cdns,read-delay = <0>; > + cdns,tshsl-ns = <0>; > + cdns,tsd2d-ns = <0>; > + cdns,tchsh-ns = <0>; > + cdns,tslch-ns = <0>; > + }; > +}; > + > +&gpio0 { > + status = "ok"; > +}; > + > +&emmc { > + bus-width = <8>; > + status = "ok"; > +}; > + > +&wdt0 { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <100000>; > + status = "okay"; > + tmp451@4c { Generic node name needed, like in devicetree spec. > + compatible = "ti,tmp451"; > + reg = <0x4c>; > + }; Here and everywhere else - line break between each node. > + tps53659@62 { > + compatible = "ti,tps53659"; > + reg = <0x62>; > + }; > + pcf85263@51 { > + compatible = "nxp,pcf85263"; > + reg = <0x51>; > + }; > +}; > + > +&spi0 { > + num-cs = <4>; > + cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>; > + status = "okay"; > + spi@0 { > + compatible = "pensando,cpld"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <0>; > + }; > + spi@1 { > + compatible = "pensando,cpld"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <1>; > + }; > + spi@2 { > + compatible = "pensando,cpld-rd1173"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <2>; > + interrupt-parent = <&porta>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > + }; > + spi@3 { > + compatible = "pensando,cpld"; > + #address-cells = <1>; > + #size-cells = <1>; > + spi-max-frequency = <12000000>; > + reg = <3>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/pensando/elba-asic.dts b/arch/arm64/boot/dts/pensando/elba-asic.dts > new file mode 100644 > index 000000000000..411c48457006 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba-asic.dts > @@ -0,0 +1,8 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/dts-v1/; > + > +#include "elba.dtsi" > +#include "elba-16core.dtsi" > +#include "elba-asic-common.dtsi" > +#include "elba-flash-parts.dtsi" > diff --git a/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi > new file mode 100644 > index 000000000000..1983de1a8403 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi > @@ -0,0 +1,80 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +&flash0 { > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + partition@0 { > + label = "flash"; > + reg = <0x00010000 0x0fff0000>; > + }; > + partition@f0000 { > + label = "golduenv"; > + reg = <0x000f0000 0x00010000>; > + }; > + partition@100000 { > + label = "boot0"; > + reg = <0x00100000 0x00080000>; > + }; > + partition@180000 { > + label = "golduboot"; > + reg = <0x00180000 0x00200000>; > + }; > + partition@400000 { > + label = "goldfw"; > + reg = <0x00400000 0x03c00000>; > + }; > + partition@4010000 { > + label = "fwmap"; > + reg = <0x04010000 0x00020000>; > + }; > + partition@4030000 { > + label = "fwsel"; > + reg = <0x04030000 0x00020000>; > + }; > + partition@4090000 { > + label = "bootlog"; > + reg = <0x04090000 0x00020000>; No leading 0 in address and size. > + }; > + partition@40b0000 { > + label = "panicbuf"; > + reg = <0x040b0000 0x00020000>; > + }; > + partition@40d0000 { > + label = "uservars"; > + reg = <0x040d0000 0x00020000>; > + }; > + partition@4200000 { > + label = "uboota"; > + reg = <0x04200000 0x00400000>; > + }; > + partition@4600000 { > + label = "ubootb"; > + reg = <0x04600000 0x00400000>; > + }; > + partition@4a00000 { > + label = "mainfwa"; > + reg = <0x04a00000 0x01000000>; > + }; > + partition@5a00000 { > + label = "mainfwb"; > + reg = <0x05a00000 0x01000000>; > + }; > + partition@8000000 { > + label = "diagfw"; > + reg = <0x08000000 0x07fe0000>; > + }; > + partition@ffe0000 { > + label = "ubootenv"; > + reg = <0x0ffe0000 0x00010000>; > + }; > + }; > +}; > + > +&soc { > + panicdump@740b0000 { > + compatible = "pensando,capri-crash"; > + reg = <0x0 0x740b0000 0x0 0x00020000>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi b/arch/arm64/boot/dts/pensando/elba.dtsi > new file mode 100644 > index 000000000000..72245e279483 > --- /dev/null > +++ b/arch/arm64/boot/dts/pensando/elba.dtsi > @@ -0,0 +1,310 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2019-2021, Pensando Systems Inc. > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. You have SPDX header. No boiler plate. OK, I stopped... Best regards, Krzysztof
On Thu, Mar 4, 2021 at 12:52 AM Linus Walleij <linus.walleij@linaro.org> wrote: > > On Thu, Mar 4, 2021 at 4:42 AM Brad Larson <brad@pensando.io> wrote: > > > Add Pensando common and Elba SoC specific device nodes > > and corresponding binding documentation. > > > > Signed-off-by: Brad Larson <brad@pensando.io> > (...) > > .../bindings/gpio/pensando,elba-spics.txt | 24 ++ > > Please use YAML schema for this. In patchset v2 changed to YAML schema and passed dt_binding_check and dtbs_check.
On Thu, Mar 4, 2021 at 12:03 AM Serge Semin <fancer.lancer@gmail.com> wrote: > > On Wed, Mar 03, 2021 at 07:41:40PM -0800, Brad Larson wrote: > > Add Pensando common and Elba SoC specific device nodes > > and corresponding binding documentation. > > This also needs to be split up into sub-patches seeing these are > unrelated changes like device bindings update, new platform DT file. In patchset v2 this is split into sub-patches. > What about converting this file to DT-schema and adding new HW > bindings in there? Converted existing file devicetree/bindings/spi/cadence-quadspi.txt to YAML schema. > > +&spi0 { > > + num-cs = <4>; > > > + cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>; > > Oh, you've got four peripheral SPI devices connected with only two native CS > available. Hmm, then I don't really know a better way, but just to forget about > the native DW APB CS functionality and activate the direct driving of > all the CS-pins at the moment of the DW APB SPI controller probe > procedure. Then indeed you'll need a custom CS function defined in the DW APB > SPI driver to handle that. Yes, with an Elba SoC specific gpio driver. > So that GPIO-controller is just a single register which provides a way > to toggle the DW APB SPI CS-mode together with their output value. > If so and seeing there are a few more tiny spaces of config > registers added to eMMC, PCI, etc DT node, I suppose all of them > belong to some bigger config space of the SoC. Thus I'd suggest to at > least implement them as part of a System Controller DT node. Then use > that device service to switch on/off corresponding functionality. > See [2] and the rest of added to the kernel DTS files with > syscon-nodes for example. > > [2] Documentation/devicetree/bindings/mfd/syscon.yaml To us it was more understandable to implement a standard gpio driver for the spi chip-selects.
diff --git a/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt new file mode 100644 index 000000000000..30f5f3275238 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt @@ -0,0 +1,24 @@ +Pensando Elba SPI Chip Select Driver + +The Pensando Elba ASIC provides four SPI bus chip selects + +Required properties: +- compatible: Should be "pensando,elba-spics" +- reg: Address range of spics controller +- gpio-controller: Marks the device node as gpio controller +- #gpio-cells: Must be 2 + +Example: +------- +spics: spics@307c2468 { + compatible = "pensando,elba-spics"; + reg = <0x0 0x307c2468 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; +}; + +&spi0 { + num-cs = <4>; + cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>; + ... +} diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index af7442f73881..645ae696ba24 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -122,7 +122,7 @@ unevaluatedProperties: false examples: - | emmc: mmc@5a000000 { - compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc", "pensando,elba-emmc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; clocks = <&clk 4>; diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt index 8ace832a2d80..dbb346b2b1d7 100644 --- a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt @@ -6,6 +6,7 @@ Required properties: For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor". For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor". + For Pensando SoC - "pensando,cdns-qspi". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f6064d84a424..9a21d780c5e1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -850,6 +850,8 @@ patternProperties: description: Parallax Inc. "^pda,.*": description: Precision Design Associates, Inc. + "^pensando,.*": + description: Pensando Systems Inc. "^pericom,.*": description: Pericom Technology Inc. "^pervasive,.*": diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index f1173cd93594..c85db0a097fe 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -19,6 +19,7 @@ subdir-y += marvell subdir-y += mediatek subdir-y += microchip subdir-y += nvidia +subdir-y += pensando subdir-y += qcom subdir-y += realtek subdir-y += renesas diff --git a/arch/arm64/boot/dts/pensando/Makefile b/arch/arm64/boot/dts/pensando/Makefile new file mode 100644 index 000000000000..0c2c0961e64a --- /dev/null +++ b/arch/arm64/boot/dts/pensando/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_PENSANDO_ELBA_SOC) += elba-asic.dtb + +always-y := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/pensando/elba-16core.dtsi b/arch/arm64/boot/dts/pensando/elba-16core.dtsi new file mode 100644 index 000000000000..b0386864cfec --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-16core.dtsi @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { cpu = <&cpu0>; }; + core1 { cpu = <&cpu1>; }; + core2 { cpu = <&cpu2>; }; + core3 { cpu = <&cpu3>; }; + }; + cluster1 { + core0 { cpu = <&cpu4>; }; + core1 { cpu = <&cpu5>; }; + core2 { cpu = <&cpu6>; }; + core3 { cpu = <&cpu7>; }; + }; + cluster2 { + core0 { cpu = <&cpu8>; }; + core1 { cpu = <&cpu9>; }; + core2 { cpu = <&cpu10>; }; + core3 { cpu = <&cpu11>; }; + }; + cluster3 { + core0 { cpu = <&cpu12>; }; + core1 { cpu = <&cpu13>; }; + core2 { cpu = <&cpu14>; }; + core3 { cpu = <&cpu15>; }; + }; + }; + + // CLUSTER 0 + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x0>; + enable-method = "spin-table"; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x1>; + enable-method = "spin-table"; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x2>; + enable-method = "spin-table"; + next-level-cache = <&l2_0>; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x3>; + enable-method = "spin-table"; + next-level-cache = <&l2_0>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + }; + + // CLUSTER 1 + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x100>; + enable-method = "spin-table"; + next-level-cache = <&l2_1>; + }; + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x101>; + enable-method = "spin-table"; + next-level-cache = <&l2_1>; + }; + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x102>; + enable-method = "spin-table"; + next-level-cache = <&l2_1>; + }; + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x103>; + enable-method = "spin-table"; + next-level-cache = <&l2_1>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + }; + + // CLUSTER 2 + cpu8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x200>; + enable-method = "spin-table"; + next-level-cache = <&l2_2>; + }; + cpu9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x201>; + enable-method = "spin-table"; + next-level-cache = <&l2_2>; + }; + cpu10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x202>; + enable-method = "spin-table"; + next-level-cache = <&l2_2>; + }; + cpu11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x203>; + enable-method = "spin-table"; + next-level-cache = <&l2_2>; + }; + + l2_2: l2-cache2 { + compatible = "cache"; + }; + + // CLUSTER 3 + cpu12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x300>; + enable-method = "spin-table"; + next-level-cache = <&l2_3>; + }; + cpu13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x301>; + enable-method = "spin-table"; + next-level-cache = <&l2_3>; + }; + cpu14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x302>; + enable-method = "spin-table"; + next-level-cache = <&l2_3>; + }; + cpu15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0 0x303>; + enable-method = "spin-table"; + next-level-cache = <&l2_3>; + }; + + l2_3: l2-cache3 { + compatible = "cache"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi new file mode 100644 index 000000000000..9623df208131 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + model = "Elba ASIC Board"; + + aliases { + serial0 = &uart0; + spi0 = &spi0; + spi1 = &qspi; + }; + + chosen { + stdout-path = "serial0:19200n8"; + }; +}; + +&ahb_clk { + clock-frequency = <400000000>; +}; + +&emmc_clk { + clock-frequency = <200000000>; +}; + +&flash_clk { + clock-frequency = <400000000>; +}; + +&ref_clk { + clock-frequency = <156250000>; +}; + +&qspi { + status = "okay"; + flash0: mt25q@0 { + compatible = "jdec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <2>; + m25p,fast-read; + cdns,read-delay = <0>; + cdns,tshsl-ns = <0>; + cdns,tsd2d-ns = <0>; + cdns,tchsh-ns = <0>; + cdns,tslch-ns = <0>; + }; +}; + +&gpio0 { + status = "ok"; +}; + +&emmc { + bus-width = <8>; + status = "ok"; +}; + +&wdt0 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + tmp451@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + tps53659@62 { + compatible = "ti,tps53659"; + reg = <0x62>; + }; + pcf85263@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&spi0 { + num-cs = <4>; + cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>; + status = "okay"; + spi@0 { + compatible = "pensando,cpld"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <0>; + }; + spi@1 { + compatible = "pensando,cpld"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <1>; + }; + spi@2 { + compatible = "pensando,cpld-rd1173"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <2>; + interrupt-parent = <&porta>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + spi@3 { + compatible = "pensando,cpld"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <12000000>; + reg = <3>; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba-asic.dts b/arch/arm64/boot/dts/pensando/elba-asic.dts new file mode 100644 index 000000000000..411c48457006 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-asic.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include "elba.dtsi" +#include "elba-16core.dtsi" +#include "elba-asic-common.dtsi" +#include "elba-flash-parts.dtsi" diff --git a/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi new file mode 100644 index 000000000000..1983de1a8403 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 + +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "flash"; + reg = <0x00010000 0x0fff0000>; + }; + partition@f0000 { + label = "golduenv"; + reg = <0x000f0000 0x00010000>; + }; + partition@100000 { + label = "boot0"; + reg = <0x00100000 0x00080000>; + }; + partition@180000 { + label = "golduboot"; + reg = <0x00180000 0x00200000>; + }; + partition@400000 { + label = "goldfw"; + reg = <0x00400000 0x03c00000>; + }; + partition@4010000 { + label = "fwmap"; + reg = <0x04010000 0x00020000>; + }; + partition@4030000 { + label = "fwsel"; + reg = <0x04030000 0x00020000>; + }; + partition@4090000 { + label = "bootlog"; + reg = <0x04090000 0x00020000>; + }; + partition@40b0000 { + label = "panicbuf"; + reg = <0x040b0000 0x00020000>; + }; + partition@40d0000 { + label = "uservars"; + reg = <0x040d0000 0x00020000>; + }; + partition@4200000 { + label = "uboota"; + reg = <0x04200000 0x00400000>; + }; + partition@4600000 { + label = "ubootb"; + reg = <0x04600000 0x00400000>; + }; + partition@4a00000 { + label = "mainfwa"; + reg = <0x04a00000 0x01000000>; + }; + partition@5a00000 { + label = "mainfwb"; + reg = <0x05a00000 0x01000000>; + }; + partition@8000000 { + label = "diagfw"; + reg = <0x08000000 0x07fe0000>; + }; + partition@ffe0000 { + label = "ubootenv"; + reg = <0x0ffe0000 0x00010000>; + }; + }; +}; + +&soc { + panicdump@740b0000 { + compatible = "pensando,capri-crash"; + reg = <0x0 0x740b0000 0x0 0x00020000>; + }; +}; diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi b/arch/arm64/boot/dts/pensando/elba.dtsi new file mode 100644 index 000000000000..72245e279483 --- /dev/null +++ b/arch/arm64/boot/dts/pensando/elba.dtsi @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019-2021, Pensando Systems Inc. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dt-bindings/interrupt-controller/arm-gic.h" + +/ { + compatible = "pensando,elba"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + ahb_clk: oscillator0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + emmc_clk: oscillator2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + flash_clk: oscillator3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + ref_clk: oscillator4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + /* Common UIO device for MSI drivers */ + uio_penmsi { + compatible = "pensando,uio_penmsi"; + name = "uio_penmsi"; + }; + + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@800000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x800000 0x0 0x200000>, // GICD + <0x0 0xa00000 0x0 0x200000>; // GICR + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + its: interrupt-controller@820000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x820000 0x0 0x10000>; + socionext,synquacer-pre-its = + <0xc00000 0x1000000>; + }; + }; + + /* + * Until we know the interrupt domain following this, we + * are forced to use this is the place where interrupts from + * PCI converge. In the ideal case, we use one domain higher, + * where the PCI-ness has been shed. + */ + pxc0_intr: intc@20102200 { + compatible = "pensando,soc-ictlr-csrintr"; + interrupt-controller; + reg = <0x0 0x20102200 0x0 0x4>; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pxc0_intr"; + }; + + uart0: serial@4800 { + device_type = "serial"; + compatible = "ns16550a"; + reg = <0x0 0x4800 0x0 0x100>; + clocks = <&ref_clk>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + qspi: spi@2400 { + compatible = "pensando,cdns-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2400 0x0 0x400>, + <0x0 0x7fff0000 0x0 0x1000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&flash_clk>; + cdns,fifo-depth = <1024>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x7fff0000>; + status = "disabled"; + }; + + gpio0: gpio@4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x4000 0x0 0x78>; + status = "disabled"; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <8>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + }; + portb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <8>; + }; + }; + + i2c0: i2c@400 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x400 0x0 0x100>; + clocks = <&ahb_clk>; + #address-cells = <1>; + #size-cells = <0>; + i2c-sda-hold-time-ns = <480>; + snps,sda-timeout-ms = <750>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + /* UIO device using interrupt line PCIEMAC */ + pciemac@20102200 { + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <3>; + + compatible = "pensando,uio_pciemac"; + register-type = "csr-interrupt"; + interrupt-parent = <&pxc0_intr>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x20102200 0x0 0x10>; /* pxc0_intr */ + + enable_csr_paddr = <0x0 0x20102200 0x0 0x10>; + enable_mask = <(1 << 0)>; + }; + + /* MSI UIO device 1 */ + uio_penmsi1@520000 { + compatible = "pensando,uio_penmsi1"; + reg = <0x0 0x520000 0x0 0x10000>; + msi-parent = <&its 0xa>; + num-interrupts = <16>; /* # MSI interrupts to get */ + }; + + spics: spics@307c2468 { + compatible = "pensando,elba-spics"; + reg = <0x0 0x307c2468 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi0: spi@2800 { + compatible = "pensando,elba-spi"; + reg = <0x0 0x2800 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + status = "disabled"; + }; + + wdt0: watchdog@1400 { + compatible = "snps,dw-wdt"; + reg = <0x0 0x1400 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + wdt1: watchdog@1800 { + compatible = "snps,dw-wdt"; + reg = <0x0 0x1800 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + wdt2: watchdog@1c00 { + compatible = "snps,dw-wdt"; + reg = <0x0 0x1c00 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + wdt3: watchdog@2000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0x2000 0x0 0x100>; + clocks = <&ahb_clk>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + emmc: sdio-host-chip@30440000 { + compatible = "pensando,elba-emmc"; + clocks = <&emmc_clk>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x30440000 0x0 0x10000 + 0x0 0x30480044 0x0 0x4>; + cdns,phy-input-delay-sd-highspeed = <0x4>; + cdns,phy-input-delay-legacy = <0x4>; + cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>; + cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>; + cdns,mmc-ddr-1_8v; + status = "disabled"; + } ; + + pcie@307c2480 { + compatible = "pensando,pcie"; + reg = <0x0 0x307c2480 0x0 0x4 /* MS CFG_WDT */ + 0x0 0x00001400 0x0 0x10 /* WDT0 */ + 0x0 0x20000000 0x0 0x00380000>; /* PXB Base */ + }; + + panic: panicdump@0 { + compatible = "pensando,pen-crash"; + status = "disabled"; + }; + + bsm@307c2080 { + compatible = "pensando,bsm"; + reg = <0x0 0x307c2080 0x0 0x4>; + }; + }; + mnet0: mnet0 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x0>; + }; + mnet1: mnet1 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x1>; + }; + mnet2: mnet2 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x2>; + }; + mnet3: mnet3 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x3>; + }; + mnet4: mnet4 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x4>; + }; + mnet5: mnet5 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x5>; + }; + mnet6: mnet6 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x6>; + }; + mnet7: mnet7 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x7>; + }; + mnet8: mnet8 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x8>; + }; + mnet9: mnet9 { + compatible = "pensando,mnet"; + msi-parent = <&its 0x9>; + }; +};
Add Pensando common and Elba SoC specific device nodes and corresponding binding documentation. Signed-off-by: Brad Larson <brad@pensando.io> --- .../bindings/gpio/pensando,elba-spics.txt | 24 ++ .../devicetree/bindings/mmc/cdns,sdhci.yaml | 2 +- .../bindings/spi/cadence-quadspi.txt | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/pensando/Makefile | 6 + arch/arm64/boot/dts/pensando/elba-16core.dtsi | 171 ++++++++++ .../boot/dts/pensando/elba-asic-common.dtsi | 113 +++++++ arch/arm64/boot/dts/pensando/elba-asic.dts | 8 + .../boot/dts/pensando/elba-flash-parts.dtsi | 80 +++++ arch/arm64/boot/dts/pensando/elba.dtsi | 310 ++++++++++++++++++ 11 files changed, 717 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt create mode 100644 arch/arm64/boot/dts/pensando/Makefile create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi