diff mbox series

[v4,4/5] ASoC: dt-bindings: wsa881x: add bindings for port mapping

Message ID 20210315165650.13392-5-srinivas.kandagatla@linaro.org
State New
Headers show
Series soundwire: add static port map support | expand

Commit Message

Srinivas Kandagatla March 15, 2021, 4:56 p.m. UTC 
WSA881x SoundWire device ports are statically assigned to master ports
at design time. So add bindings required to specify these mappings!

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 .../devicetree/bindings/sound/qcom,wsa881x.yaml          | 9 +++++++++
 1 file changed, 9 insertions(+)

-- 
2.21.0

Comments

Rob Herring (Arm) March 24, 2021, 6:22 p.m. UTC | #1 
On Mon, 15 Mar 2021 16:56:49 +0000, Srinivas Kandagatla wrote:
> WSA881x SoundWire device ports are statically assigned to master ports

> at design time. So add bindings required to specify these mappings!

> 

> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---

>  .../devicetree/bindings/sound/qcom,wsa881x.yaml          | 9 +++++++++

>  1 file changed, 9 insertions(+)

> 


Reviewed-by: Rob Herring <robh@kernel.org>
Vinod Koul March 30, 2021, 9:01 a.m. UTC | #2 
On 15-03-21, 16:56, Srinivas Kandagatla wrote:
> WSA881x SoundWire device ports are statically assigned to master ports

> at design time. So add bindings required to specify these mappings!


Mark, are you okay for 4, 5 to go thru sdw tree with your ack? The
patches lgtm

-- 
~Vinod
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
index ea44d03e58ca..491ce1270cb5 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
@@ -26,6 +26,13 @@  properties:
     description: GPIO spec for Powerdown/Shutdown line to use
     maxItems: 1
 
+  qcom,port-mapping:
+    description: |
+      Specifies static port mapping between slave and master ports.
+      In the order of slave port index.
+    maxItems: 4
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
   '#thermal-sensor-cells':
     const: 0
 
@@ -54,6 +61,7 @@  examples:
             powerdown-gpios = <&wcdpinctrl 2 0>;
             #thermal-sensor-cells = <0>;
             #sound-dai-cells = <0>;
+            qcom,port-mapping = <1 2 3 7>;
         };
 
         speaker@0,2 {
@@ -62,6 +70,7 @@  examples:
             powerdown-gpios = <&wcdpinctrl 2 0>;
             #thermal-sensor-cells = <0>;
             #sound-dai-cells = <0>;
+            qcom,port-mapping = <4 5 6 8>;
         };
     };