diff mbox series

[v4,2/5] phy: Add LVDS configuration options

Message ID 1615175541-29009-3-git-send-email-victor.liu@nxp.com
State New
Headers show
Series [v4,1/5] drm/bridge: nwl-dsi: Set PHY mode in nwl_dsi_enable() | expand

Commit Message

Liu Ying March 8, 2021, 3:52 a.m. UTC
This patch allows LVDS PHYs to be configured through
the generic functions and through a custom structure
added to the generic union.

The parameters added here are based on common LVDS PHY
implementation practices.  The set of parameters
should cover all potential users.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v3->v4:
* Add Robert's R-b tag.

v2->v3:
* No change.

v1->v2:
* No change.

 include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/phy/phy.h      |  4 ++++
 2 files changed, 52 insertions(+)
 create mode 100644 include/linux/phy/phy-lvds.h

Comments

Vinod Koul March 17, 2021, 10:22 a.m. UTC | #1
On 08-03-21, 11:52, Liu Ying wrote:
> This patch allows LVDS PHYs to be configured through
> the generic functions and through a custom structure
> added to the generic union.
> 
> The parameters added here are based on common LVDS PHY
> implementation practices.  The set of parameters
> should cover all potential users.
> 
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v3->v4:
> * Add Robert's R-b tag.
> 
> v2->v3:
> * No change.
> 
> v1->v2:
> * No change.
> 
>  include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  4 ++++
>  2 files changed, 52 insertions(+)
>  create mode 100644 include/linux/phy/phy-lvds.h
> 
> diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
> new file mode 100644
> index 00000000..1b5b9d6
> --- /dev/null
> +++ b/include/linux/phy/phy-lvds.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __PHY_LVDS_H_
> +#define __PHY_LVDS_H_
> +
> +/**
> + * struct phy_configure_opts_lvds - LVDS configuration set
> + *
> + * This structure is used to represent the configuration state of a
> + * LVDS phy.
> + */
> +struct phy_configure_opts_lvds {
> +	/**
> +	 * @bits_per_lane_and_dclk_cycle:
> +	 *
> +	 * Number of bits per data lane and differential clock cycle.
> +	 */

Can we have these in kernel-doc style please, similar to style in linux/phy/phy.h

> +	unsigned int bits_per_lane_and_dclk_cycle;
> +
> +	/**
> +	 * @differential_clk_rate:
> +	 *
> +	 * Clock rate, in Hertz, of the LVDS differential clock.
> +	 */
> +	unsigned long differential_clk_rate;
> +
> +	/**
> +	 * @lanes:
> +	 *
> +	 * Number of active, consecutive, data lanes, starting from
> +	 * lane 0, used for the transmissions.
> +	 */
> +	unsigned int lanes;
> +
> +	/**
> +	 * @is_slave:
> +	 *
> +	 * Boolean, true if the phy is a slave which works together
> +	 * with a master phy to support dual link transmission,
> +	 * otherwise a regular phy or a master phy.
> +	 */
> +	bool is_slave;
> +};
> +
> +#endif /* __PHY_LVDS_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index e435bdb..d450b44 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
>  struct phy;
> @@ -51,10 +52,13 @@ enum phy_mode {
>   *		the MIPI_DPHY phy mode.
>   * @dp:		Configuration set applicable for phys supporting
>   *		the DisplayPort protocol.
> + * @lvds:	Configuration set applicable for phys supporting
> + *		the LVDS phy mode.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
>  	struct phy_configure_opts_dp		dp;
> +	struct phy_configure_opts_lvds		lvds;
>  };
>  
>  /**
> -- 
> 2.7.4
Liu Ying March 18, 2021, 2:22 a.m. UTC | #2
Hi Vinod,

On Wed, 2021-03-17 at 15:52 +0530, Vinod Koul wrote:
> On 08-03-21, 11:52, Liu Ying wrote:
> > This patch allows LVDS PHYs to be configured through
> > the generic functions and through a custom structure
> > added to the generic union.
> > 
> > The parameters added here are based on common LVDS PHY
> > implementation practices.  The set of parameters
> > should cover all potential users.
> > 
> > Cc: Kishon Vijay Abraham I <kishon@ti.com>
> > Cc: Vinod Koul <vkoul@kernel.org>
> > Cc: NXP Linux Team <linux-imx@nxp.com>
> > Reviewed-by: Robert Foss <robert.foss@linaro.org>
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > ---
> > v3->v4:
> > * Add Robert's R-b tag.
> > 
> > v2->v3:
> > * No change.
> > 
> > v1->v2:
> > * No change.
> > 
> >  include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/phy/phy.h      |  4 ++++
> >  2 files changed, 52 insertions(+)
> >  create mode 100644 include/linux/phy/phy-lvds.h
> > 
> > diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
> > new file mode 100644
> > index 00000000..1b5b9d6
> > --- /dev/null
> > +++ b/include/linux/phy/phy-lvds.h
> > @@ -0,0 +1,48 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright 2020 NXP
> > + */
> > +
> > +#ifndef __PHY_LVDS_H_
> > +#define __PHY_LVDS_H_
> > +
> > +/**
> > + * struct phy_configure_opts_lvds - LVDS configuration set
> > + *
> > + * This structure is used to represent the configuration state of a
> > + * LVDS phy.
> > + */
> > +struct phy_configure_opts_lvds {
> > +	/**
> > +	 * @bits_per_lane_and_dclk_cycle:
> > +	 *
> > +	 * Number of bits per data lane and differential clock cycle.
> > +	 */
> 
> Can we have these in kernel-doc style please, similar to style in linux/phy/phy.h

I take this way of in-line member documentation comment for the below 3
reasons:

1) Members of struct phy_configure_opts_mipi_dphy and
struct phy_configure_opts_dp use the same way of comment.
The structures are defined in linux/phy/phy-mipi-dphy.h and
linux/phy/phy-dp.h respectively.
Aligning to them makes a bit sense, IMHO.

2) In-line member documentation comments[1] are mentioned in kernel-doc 
guide. It says 'The structure members may also be documented in-line
within the definition.'.

3) Even the 'configure' and 'validate' members of struct phy_ops use
the same way of comment.  struct phy_ops is defined in linux/phy/phy.h.

[1] 
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#in-line-member-documentation-comments

Regards,
Liu Ying

> 
> > +	unsigned int bits_per_lane_and_dclk_cycle;
> > +
> > +	/**
> > +	 * @differential_clk_rate:
> > +	 *
> > +	 * Clock rate, in Hertz, of the LVDS differential clock.
> > +	 */
> > +	unsigned long differential_clk_rate;
> > +
> > +	/**
> > +	 * @lanes:
> > +	 *
> > +	 * Number of active, consecutive, data lanes, starting from
> > +	 * lane 0, used for the transmissions.
> > +	 */
> > +	unsigned int lanes;
> > +
> > +	/**
> > +	 * @is_slave:
> > +	 *
> > +	 * Boolean, true if the phy is a slave which works together
> > +	 * with a master phy to support dual link transmission,
> > +	 * otherwise a regular phy or a master phy.
> > +	 */
> > +	bool is_slave;
> > +};
> > +
> > +#endif /* __PHY_LVDS_H_ */
> > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> > index e435bdb..d450b44 100644
> > --- a/include/linux/phy/phy.h
> > +++ b/include/linux/phy/phy.h
> > @@ -17,6 +17,7 @@
> >  #include <linux/regulator/consumer.h>
> >  
> >  #include <linux/phy/phy-dp.h>
> > +#include <linux/phy/phy-lvds.h>
> >  #include <linux/phy/phy-mipi-dphy.h>
> >  
> >  struct phy;
> > @@ -51,10 +52,13 @@ enum phy_mode {
> >   *		the MIPI_DPHY phy mode.
> >   * @dp:		Configuration set applicable for phys supporting
> >   *		the DisplayPort protocol.
> > + * @lvds:	Configuration set applicable for phys supporting
> > + *		the LVDS phy mode.
> >   */
> >  union phy_configure_opts {
> >  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
> >  	struct phy_configure_opts_dp		dp;
> > +	struct phy_configure_opts_lvds		lvds;
> >  };
> >  
> >  /**
> > -- 
> > 2.7.4
Vinod Koul March 25, 2021, 7:28 a.m. UTC | #3
On 18-03-21, 10:22, Liu Ying wrote:

> > Can we have these in kernel-doc style please, similar to style in linux/phy/phy.h
> 
> I take this way of in-line member documentation comment for the below 3
> reasons:
> 
> 1) Members of struct phy_configure_opts_mipi_dphy and
> struct phy_configure_opts_dp use the same way of comment.
> The structures are defined in linux/phy/phy-mipi-dphy.h and
> linux/phy/phy-dp.h respectively.
> Aligning to them makes a bit sense, IMHO.
> 
> 2) In-line member documentation comments[1] are mentioned in kernel-doc 
> guide. It says 'The structure members may also be documented in-line
> within the definition.'.
> 
> 3) Even the 'configure' and 'validate' members of struct phy_ops use
> the same way of comment.  struct phy_ops is defined in linux/phy/phy.h.
> 
> [1] 
> https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#in-line-member-documentation-comments

It 'may be' but I would like all headers of a subsystem to display one
style. As I said linux/phy/phy.h use a style which we should use
everywhere.

Thanks
diff mbox series

Patch

diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
new file mode 100644
index 00000000..1b5b9d6
--- /dev/null
+++ b/include/linux/phy/phy-lvds.h
@@ -0,0 +1,48 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef __PHY_LVDS_H_
+#define __PHY_LVDS_H_
+
+/**
+ * struct phy_configure_opts_lvds - LVDS configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * LVDS phy.
+ */
+struct phy_configure_opts_lvds {
+	/**
+	 * @bits_per_lane_and_dclk_cycle:
+	 *
+	 * Number of bits per data lane and differential clock cycle.
+	 */
+	unsigned int bits_per_lane_and_dclk_cycle;
+
+	/**
+	 * @differential_clk_rate:
+	 *
+	 * Clock rate, in Hertz, of the LVDS differential clock.
+	 */
+	unsigned long differential_clk_rate;
+
+	/**
+	 * @lanes:
+	 *
+	 * Number of active, consecutive, data lanes, starting from
+	 * lane 0, used for the transmissions.
+	 */
+	unsigned int lanes;
+
+	/**
+	 * @is_slave:
+	 *
+	 * Boolean, true if the phy is a slave which works together
+	 * with a master phy to support dual link transmission,
+	 * otherwise a regular phy or a master phy.
+	 */
+	bool is_slave;
+};
+
+#endif /* __PHY_LVDS_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb..d450b44 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -17,6 +17,7 @@ 
 #include <linux/regulator/consumer.h>
 
 #include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-lvds.h>
 #include <linux/phy/phy-mipi-dphy.h>
 
 struct phy;
@@ -51,10 +52,13 @@  enum phy_mode {
  *		the MIPI_DPHY phy mode.
  * @dp:		Configuration set applicable for phys supporting
  *		the DisplayPort protocol.
+ * @lvds:	Configuration set applicable for phys supporting
+ *		the LVDS phy mode.
  */
 union phy_configure_opts {
 	struct phy_configure_opts_mipi_dphy	mipi_dphy;
 	struct phy_configure_opts_dp		dp;
+	struct phy_configure_opts_lvds		lvds;
 };
 
 /**