| Message ID | 20210312120817.12604-1-unixbhaskar@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c | expand |
On 12/03/2021 13:08, Bhaskar Chowdhury wrote: > > s/untile/until/ > s/souce/source/ > s/divier/divider/ > > Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> > --- > drivers/cpufreq/s5pv210-cpufreq.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c > index bed496cf8d24..1cfea5339beb 100644 > --- a/drivers/cpufreq/s5pv210-cpufreq.c > +++ b/drivers/cpufreq/s5pv210-cpufreq.c > @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) > /* > * 6. Turn on APLL > * 6-1. Set PMS values > - * 6-2. Wait untile the PLL is locked > + * 6-2. Wait until the PLL is locked > */ > if (index == L0) > writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); > @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) > } while (!(reg & (0x1 << 29))); > > /* > - * 7. Change souce clock from SCLKMPLL(667Mhz) > + * 7. Change source clock from SCLKMPLL(667Mhz) > * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX > * (667/4=166)->(200/4=50)Mhz > */ > @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) > } > > /* > - * L4 level need to change memory bus speed, hence onedram clock divier > + * L4 level need to change memory bus speed, hence onedram clock divider Also grammar fix: need/needs. Best regards, Krzysztof
On 15:01 Fri 12 Mar 2021, Krzysztof Kozlowski wrote: >On 12/03/2021 13:08, Bhaskar Chowdhury wrote: >> >> s/untile/until/ >> s/souce/source/ >> s/divier/divider/ >> >> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> >> --- >> drivers/cpufreq/s5pv210-cpufreq.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c >> index bed496cf8d24..1cfea5339beb 100644 >> --- a/drivers/cpufreq/s5pv210-cpufreq.c >> +++ b/drivers/cpufreq/s5pv210-cpufreq.c >> @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) >> /* >> * 6. Turn on APLL >> * 6-1. Set PMS values >> - * 6-2. Wait untile the PLL is locked >> + * 6-2. Wait until the PLL is locked >> */ >> if (index == L0) >> writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); >> @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) >> } while (!(reg & (0x1 << 29))); >> >> /* >> - * 7. Change souce clock from SCLKMPLL(667Mhz) >> + * 7. Change source clock from SCLKMPLL(667Mhz) >> * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX >> * (667/4=166)->(200/4=50)Mhz >> */ >> @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) >> } >> >> /* >> - * L4 level need to change memory bus speed, hence onedram clock divier >> + * L4 level need to change memory bus speed, hence onedram clock divider > >Also grammar fix: need/needs. > Hmmm ...good catch...V2 on the way... >Best regards, >Krzysztof
On Sat, Mar 13, 2021 at 04:46:20AM +0530, Bhaskar Chowdhury wrote: > On 15:01 Fri 12 Mar 2021, Krzysztof Kozlowski wrote: > > On 12/03/2021 13:08, Bhaskar Chowdhury wrote: > > > > > > s/untile/until/ > > > s/souce/source/ > > > s/divier/divider/ > > > > > > Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> > > > --- > > > drivers/cpufreq/s5pv210-cpufreq.c | 6 +++--- > > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c > > > index bed496cf8d24..1cfea5339beb 100644 > > > --- a/drivers/cpufreq/s5pv210-cpufreq.c > > > +++ b/drivers/cpufreq/s5pv210-cpufreq.c > > > @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) > > > /* > > > * 6. Turn on APLL > > > * 6-1. Set PMS values > > > - * 6-2. Wait untile the PLL is locked > > > + * 6-2. Wait until the PLL is locked > > > */ > > > if (index == L0) > > > writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); > > > @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) > > > } while (!(reg & (0x1 << 29))); > > > > > > /* > > > - * 7. Change souce clock from SCLKMPLL(667Mhz) > > > + * 7. Change source clock from SCLKMPLL(667Mhz) > > > * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX > > > * (667/4=166)->(200/4=50)Mhz > > > */ > > > @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) > > > } > > > > > > /* > > > - * L4 level need to change memory bus speed, hence onedram clock divier > > > + * L4 level need to change memory bus speed, hence onedram clock divider > > > > Also grammar fix: need/needs. > > > Hmmm ...good catch...V2 on the way... > > > Best regards, > > Krzysztof May as well roll in few more? Regards, --Tom diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index a186c0d8a290..6ecef301bd40 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock); /* Use 800MHz when entering sleep mode */ #define SLEEP_FREQ (800 * 1000) -/* Tracks if cpu freqency can be updated anymore */ +/* Tracks if cpu frequency can be updated anymore */ static bool no_cpufreq_access; /* @@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = { /* * This function set DRAM refresh counter - * accoriding to operating frequency of DRAM + * according to operating frequency of DRAM * ch: DMC port number 0 or 1 * freq: Operating frequency of DRAM(KHz) */ @@ -320,7 +320,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) /* * 3. DMC1 refresh count for 133Mhz if (index == L4) is - * true refresh counter is already programed in upper + * true refresh counter is already programmed in upper * code. 0x287@83Mhz */ if (!bus_speed_changing)
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index bed496cf8d24..1cfea5339beb 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) /* * 6. Turn on APLL * 6-1. Set PMS values - * 6-2. Wait untile the PLL is locked + * 6-2. Wait until the PLL is locked */ if (index == L0) writel_relaxed(APLL_VAL_1000, S5P_APLL_CON); @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) } while (!(reg & (0x1 << 29))); /* - * 7. Change souce clock from SCLKMPLL(667Mhz) + * 7. Change source clock from SCLKMPLL(667Mhz) * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX * (667/4=166)->(200/4=50)Mhz */ @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) } /* - * L4 level need to change memory bus speed, hence onedram clock divier + * L4 level need to change memory bus speed, hence onedram clock divider * and memory refresh parameter should be changed */ if (bus_speed_changing) {
s/untile/until/ s/souce/source/ s/divier/divider/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> --- drivers/cpufreq/s5pv210-cpufreq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) -- 2.26.2