| Message ID | 20210211200128.2886388-1-thara.gopinath@linaro.org |
|---|---|
| Headers | show |
| Series | Regression fixes/clean ups in the Qualcomm crypto engine driver | expand |
On 2/11/21 3:01 PM, Thara Gopinath wrote: > This patch series is a result of running kernel crypto fuzz tests (by > enabling CONFIG_CRYPTO_MANAGER_EXTRA_TESTS) on the transformations > currently supported via the Qualcomm crypto engine on sdm845. The first > nine patches are fixes for various regressions found during testing. The > last two patches are minor clean ups of unused variable and parameters. Hi Herbert, This version has all the comments from you and rest of the community fixed. Do you think you can merge this ? > > v6->v7: > - Fixed sparse warning in patch 4 as pointed out by Herbert Xu. > This means the checking if any two keys are same for triple > des algorithms has been reverted back to using conditional OR > instead of using bitwise OR. > - Rebased to 5.11-rc7. > > v5->v6: > - Return 0 for zero length messages instead of -EOPNOTSUPP in the > cipher algorithms as pointed out by Eric Biggers. > - Remove the wrong TODO in patch 6 which implied that AES CBC can > do partial block sizes when it is actually CTS mode that can as > pointed out my Eric Biggers. > > v4->v5: > - Fixed build warning/error in patch for wrong assignment of const > pointer as reported by kernel test robot <lkp@intel.com>. > - Rebased to 5.11-rc6. > v3->v4: > - Fixed the bug where only two bytes of byte_count were getting > saved and restored instead of all eight bytes. Thanks Bjorn for > catching this. > - Split patch 3 "Fix regressions found during fuzz testing" into > 6 patches as requested by Bjorn. > - Dropped crypto from all subject headers. > - Rebased to 5.11-rc5 > v2->v3: > - Made the comparison between keys to check if any two keys are > same for triple des algorithms constant-time as per > Nym Seddon's suggestion. > - Rebased to 5.11-rc4. > v1->v2: > - Introduced custom struct qce_sha_saved_state to store and restore > partial sha transformation. > - Rebased to 5.11-rc3. > > Thara Gopinath (11): > crypto: qce: sha: Restore/save ahash state with custom struct in > export/import > crypto: qce: sha: Hold back a block of data to be transferred as part > of final > crypto: qce: skcipher: Return unsupported if key1 and key 2 are same > for AES XTS algorithm > crypto: qce: skcipher: Return unsupported if any three keys are same > for DES3 algorithms > crypto: qce: skcipher: Return error for zero length messages > crypto: qce: skcipher: Return error for non-blocksize data(ECB/CBC > algorithms) > crypto: qce: skcipher: Set ivsize to 0 for ecb(aes) > *** BLURB HERE *** > > Thara Gopinath (11): > crypto: qce: sha: Restore/save ahash state with custom struct in > export/import > crypto: qce: sha: Hold back a block of data to be transferred as part > of final > crypto: qce: skcipher: Return unsupported if key1 and key 2 are same > for AES XTS algorithm > crypto: qce: skcipher: Return unsupported if any three keys are same > for DES3 algorithms > crypto: qce: skcipher: Return error for zero length messages > crypto: qce: skcipher: Return error for non-blocksize data(ECB/CBC > algorithms) > crypto: qce: skcipher: Set ivsize to 0 for ecb(aes) > crypto: qce: skcipher: Improve the conditions for requesting AES > fallback cipher > crypto: qce: common: Set data unit size to message length for AES XTS > transformation > crypto: qce: Remover src_tbl from qce_cipher_reqctx > crypto: qce: Remove totallen and offset in qce_start > > drivers/crypto/qce/cipher.h | 1 - > drivers/crypto/qce/common.c | 25 +++--- > drivers/crypto/qce/common.h | 3 +- > drivers/crypto/qce/sha.c | 143 +++++++++++++--------------------- > drivers/crypto/qce/skcipher.c | 69 +++++++++++++--- > 5 files changed, 126 insertions(+), 115 deletions(-) > -- Warm Regards Thara
On Thu, Feb 11, 2021 at 03:01:17PM -0500, Thara Gopinath wrote: > This patch series is a result of running kernel crypto fuzz tests (by > enabling CONFIG_CRYPTO_MANAGER_EXTRA_TESTS) on the transformations > currently supported via the Qualcomm crypto engine on sdm845. The first > nine patches are fixes for various regressions found during testing. The > last two patches are minor clean ups of unused variable and parameters. > > v6->v7: > - Fixed sparse warning in patch 4 as pointed out by Herbert Xu. > This means the checking if any two keys are same for triple > des algorithms has been reverted back to using conditional OR > instead of using bitwise OR. > - Rebased to 5.11-rc7. > > v5->v6: > - Return 0 for zero length messages instead of -EOPNOTSUPP in the > cipher algorithms as pointed out by Eric Biggers. > - Remove the wrong TODO in patch 6 which implied that AES CBC can > do partial block sizes when it is actually CTS mode that can as > pointed out my Eric Biggers. > > v4->v5: > - Fixed build warning/error in patch for wrong assignment of const > pointer as reported by kernel test robot <lkp@intel.com>. > - Rebased to 5.11-rc6. > v3->v4: > - Fixed the bug where only two bytes of byte_count were getting > saved and restored instead of all eight bytes. Thanks Bjorn for > catching this. > - Split patch 3 "Fix regressions found during fuzz testing" into > 6 patches as requested by Bjorn. > - Dropped crypto from all subject headers. > - Rebased to 5.11-rc5 > v2->v3: > - Made the comparison between keys to check if any two keys are > same for triple des algorithms constant-time as per > Nym Seddon's suggestion. > - Rebased to 5.11-rc4. > v1->v2: > - Introduced custom struct qce_sha_saved_state to store and restore > partial sha transformation. > - Rebased to 5.11-rc3. > > Thara Gopinath (11): > crypto: qce: sha: Restore/save ahash state with custom struct in > export/import > crypto: qce: sha: Hold back a block of data to be transferred as part > of final > crypto: qce: skcipher: Return unsupported if key1 and key 2 are same > for AES XTS algorithm > crypto: qce: skcipher: Return unsupported if any three keys are same > for DES3 algorithms > crypto: qce: skcipher: Return error for zero length messages > crypto: qce: skcipher: Return error for non-blocksize data(ECB/CBC > algorithms) > crypto: qce: skcipher: Set ivsize to 0 for ecb(aes) > *** BLURB HERE *** > > Thara Gopinath (11): > crypto: qce: sha: Restore/save ahash state with custom struct in > export/import > crypto: qce: sha: Hold back a block of data to be transferred as part > of final > crypto: qce: skcipher: Return unsupported if key1 and key 2 are same > for AES XTS algorithm > crypto: qce: skcipher: Return unsupported if any three keys are same > for DES3 algorithms > crypto: qce: skcipher: Return error for zero length messages > crypto: qce: skcipher: Return error for non-blocksize data(ECB/CBC > algorithms) > crypto: qce: skcipher: Set ivsize to 0 for ecb(aes) > crypto: qce: skcipher: Improve the conditions for requesting AES > fallback cipher > crypto: qce: common: Set data unit size to message length for AES XTS > transformation > crypto: qce: Remover src_tbl from qce_cipher_reqctx > crypto: qce: Remove totallen and offset in qce_start > > drivers/crypto/qce/cipher.h | 1 - > drivers/crypto/qce/common.c | 25 +++--- > drivers/crypto/qce/common.h | 3 +- > drivers/crypto/qce/sha.c | 143 +++++++++++++--------------------- > drivers/crypto/qce/skcipher.c | 69 +++++++++++++--- > 5 files changed, 126 insertions(+), 115 deletions(-) All applied. Thanks. -- Email: Herbert Xu <herbert@gondor.apana.org.au> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
This patch series is a result of running kernel crypto fuzz tests (by enabling CONFIG_CRYPTO_MANAGER_EXTRA_TESTS) on the transformations currently supported via the Qualcomm crypto engine on sdm845. The first nine patches are fixes for various regressions found during testing. The last two patches are minor clean ups of unused variable and parameters. v6->v7: - Fixed sparse warning in patch 4 as pointed out by Herbert Xu. This means the checking if any two keys are same for triple des algorithms has been reverted back to using conditional OR instead of using bitwise OR. - Rebased to 5.11-rc7. v5->v6: - Return 0 for zero length messages instead of -EOPNOTSUPP in the cipher algorithms as pointed out by Eric Biggers. - Remove the wrong TODO in patch 6 which implied that AES CBC can do partial block sizes when it is actually CTS mode that can as pointed out my Eric Biggers. v4->v5: - Fixed build warning/error in patch for wrong assignment of const pointer as reported by kernel test robot <lkp@intel.com>. - Rebased to 5.11-rc6. v3->v4: - Fixed the bug where only two bytes of byte_count were getting saved and restored instead of all eight bytes. Thanks Bjorn for catching this. - Split patch 3 "Fix regressions found during fuzz testing" into 6 patches as requested by Bjorn. - Dropped crypto from all subject headers. - Rebased to 5.11-rc5 v2->v3: - Made the comparison between keys to check if any two keys are same for triple des algorithms constant-time as per Nym Seddon's suggestion. - Rebased to 5.11-rc4. v1->v2: - Introduced custom struct qce_sha_saved_state to store and restore partial sha transformation. - Rebased to 5.11-rc3. Thara Gopinath (11): crypto: qce: sha: Restore/save ahash state with custom struct in export/import crypto: qce: sha: Hold back a block of data to be transferred as part of final crypto: qce: skcipher: Return unsupported if key1 and key 2 are same for AES XTS algorithm crypto: qce: skcipher: Return unsupported if any three keys are same for DES3 algorithms crypto: qce: skcipher: Return error for zero length messages crypto: qce: skcipher: Return error for non-blocksize data(ECB/CBC algorithms) crypto: qce: skcipher: Set ivsize to 0 for ecb(aes) *** BLURB HERE *** Thara Gopinath (11): crypto: qce: sha: Restore/save ahash state with custom struct in export/import crypto: qce: sha: Hold back a block of data to be transferred as part of final crypto: qce: skcipher: Return unsupported if key1 and key 2 are same for AES XTS algorithm crypto: qce: skcipher: Return unsupported if any three keys are same for DES3 algorithms crypto: qce: skcipher: Return error for zero length messages crypto: qce: skcipher: Return error for non-blocksize data(ECB/CBC algorithms) crypto: qce: skcipher: Set ivsize to 0 for ecb(aes) crypto: qce: skcipher: Improve the conditions for requesting AES fallback cipher crypto: qce: common: Set data unit size to message length for AES XTS transformation crypto: qce: Remover src_tbl from qce_cipher_reqctx crypto: qce: Remove totallen and offset in qce_start drivers/crypto/qce/cipher.h | 1 - drivers/crypto/qce/common.c | 25 +++--- drivers/crypto/qce/common.h | 3 +- drivers/crypto/qce/sha.c | 143 +++++++++++++--------------------- drivers/crypto/qce/skcipher.c | 69 +++++++++++++--- 5 files changed, 126 insertions(+), 115 deletions(-) -- 2.25.1