| Message ID | cover.1611653995.git.cristian.ciocaltea@gmail.com |
|---|---|
| Headers | show |
| Series | Add initial support for ATC260x PMICs | expand |
Hi Lee, I have just noticed your mfd-next tag for 5.12 doesn't include the support for the ATC260x PMICs. I assumed the patchset is ready for merging.. Did I miss something? Thanks, Cristi On Tue, Jan 26, 2021 at 11:55:56AM +0200, Cristian Ciocaltea wrote: > The ATC260x family of PMICs integrates Audio Codec, Power management, > Clock generation and GPIO controller blocks. There are currently 3 > variants: ATC2603A, ATC2603C and ATC2609A. > > This is re-spin of the v1 patch series submitted some time ago by > Mani, who provided the MFD and regulator drivers for ATC2609A: > https://lore.kernel.org/lkml/20190617155011.15376-1-manivannan.sadhasivam@linaro.org/ > > Since v2, I added support for ATC2603C, together with some new > functionalities for both chips: power controller and onkey input. > The ATC2603A chip type remains unsupported for the moment. > > This has been tested on RoseapplePi, a SBC based on the Actions Semi S500 > SoC, which integrates the ATC2603C variant of the PMIC. > > Note that enabling the ATC260x PMICs on compatible Actions Semi Owl SoC > based boards depends on: > > * the Actions Semi SIRQ driver (for PMIC DTS setup), merged in v5.10: > https://lore.kernel.org/lkml/cover.1600114378.git.cristian.ciocaltea@gmail.com/ > > * the atomic transfers in Owl I2C driver (for power controller), merged in v5.11: > https://lore.kernel.org/lkml/cover.1602190168.git.cristian.ciocaltea@gmail.com/ > > Additionally, please note that I have taken the authorship for the MFD > and regulator drivers patches, considering the original code has been > modified to a large extent. > > Thanks, > Cristi > > Changes in v7: > - Dropped the patches already queued for merging: > * regulator: Add regulator driver for ATC260x PMICs > * power: reset: Add poweroff driver for ATC260x PMICs > - Rebased patchset on v5.11-rc5 > > Changes in v6 - MFD driver updates as indicated by Lee: > - Defined a magic number for max chip revision > - Adjusted code formatting around i2c_driver struct initialization > - Dropped the device initialization callback in struct atc260x and instead > provided a generic function making use of a new member structure to hold > the hardware specific register information > > Changes in v5: > - Removed an unnecessary '#include' line in the power-off driver, > as noticed by Sebastian > - Rebased patchset on v5.11-rc3 > > Changes in v4: > - Updated MFD driver according to Lee's review > - Handled ATC2603C's LDO12 fixed regulator per Mark's suggestion > - Rebased patchset on v5.11-rc1 > > Changes in v3: > - Integrated feedback from Mani, Rob, Mark, Sebastian, Dmitry > - Fixed issues reported by Lee's kernel test robot > - Added new patch for 'reset-time-sec' DT binding property > - Rebased patchset on v5.10-rc6 > > Changes in v2: > - Reworked MFD core & I2C driver > * Integrated Lee's feedback > * Added support for using the regmap within atomic contexts > * Added support for ATC2603C chip variant > * Reorganized KConfig entries > - Improved regulator driver > * Added support for ATC2603C variant > * Used helper macros for more compact specification of regulator_desc items > * Added more regulator capabilities > - Added power controller driver > * Provides system poweroff/reboot functionalities > * Depends on atomic transfers in the Owl I2C driver > - Added onkey driver: exposes the power button as an input device > - Added yaml binding doc > - Rebased patchset on kernel v5.9-rc1 > > Cristian Ciocaltea (4): > dt-bindings: input: Add reset-time-sec common property > dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding > mfd: Add MFD driver for ATC260x PMICs > input: atc260x: Add onkey driver for ATC260x PMICs > > Manivannan Sadhasivam (1): > MAINTAINERS: Add entry for ATC260x PMIC > > .../devicetree/bindings/input/input.yaml | 7 + > .../bindings/mfd/actions,atc260x.yaml | 183 +++++++++++ > MAINTAINERS | 12 + > drivers/input/misc/Kconfig | 11 + > drivers/input/misc/Makefile | 2 +- > drivers/input/misc/atc260x-onkey.c | 305 +++++++++++++++++ > drivers/mfd/Kconfig | 18 + > drivers/mfd/Makefile | 3 + > drivers/mfd/atc260x-core.c | 310 ++++++++++++++++++ > drivers/mfd/atc260x-i2c.c | 64 ++++ > include/linux/mfd/atc260x/atc2603c.h | 281 ++++++++++++++++ > include/linux/mfd/atc260x/atc2609a.h | 308 +++++++++++++++++ > include/linux/mfd/atc260x/core.h | 58 ++++ > 13 files changed, 1561 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml > create mode 100644 drivers/input/misc/atc260x-onkey.c > create mode 100644 drivers/mfd/atc260x-core.c > create mode 100644 drivers/mfd/atc260x-i2c.c > create mode 100644 include/linux/mfd/atc260x/atc2603c.h > create mode 100644 include/linux/mfd/atc260x/atc2609a.h > create mode 100644 include/linux/mfd/atc260x/core.h > > -- > 2.30.0 >
On Sun, 21 Feb 2021, Cristian Ciocaltea wrote: > Hi Lee, > > I have just noticed your mfd-next tag for 5.12 doesn't include the > support for the ATC260x PMICs. > > I assumed the patchset is ready for merging.. Did I miss something? The MFD driver needs another review. For some reason, this didn't register on my TODO list. In general, if you don't receive a review within ~2 weeks of posting (and the merge window is not open), you should consider it lost and submit a [RESEND]. > On Tue, Jan 26, 2021 at 11:55:56AM +0200, Cristian Ciocaltea wrote: > > The ATC260x family of PMICs integrates Audio Codec, Power management, > > Clock generation and GPIO controller blocks. There are currently 3 > > variants: ATC2603A, ATC2603C and ATC2609A. > > > > This is re-spin of the v1 patch series submitted some time ago by > > Mani, who provided the MFD and regulator drivers for ATC2609A: > > https://lore.kernel.org/lkml/20190617155011.15376-1-manivannan.sadhasivam@linaro.org/ > > > > Since v2, I added support for ATC2603C, together with some new > > functionalities for both chips: power controller and onkey input. > > The ATC2603A chip type remains unsupported for the moment. > > > > This has been tested on RoseapplePi, a SBC based on the Actions Semi S500 > > SoC, which integrates the ATC2603C variant of the PMIC. > > > > Note that enabling the ATC260x PMICs on compatible Actions Semi Owl SoC > > based boards depends on: > > > > * the Actions Semi SIRQ driver (for PMIC DTS setup), merged in v5.10: > > https://lore.kernel.org/lkml/cover.1600114378.git.cristian.ciocaltea@gmail.com/ > > > > * the atomic transfers in Owl I2C driver (for power controller), merged in v5.11: > > https://lore.kernel.org/lkml/cover.1602190168.git.cristian.ciocaltea@gmail.com/
On Mon, Feb 22, 2021 at 09:02:47AM +0000, Lee Jones wrote: > On Sun, 21 Feb 2021, Cristian Ciocaltea wrote: > > > Hi Lee, > > > > I have just noticed your mfd-next tag for 5.12 doesn't include the > > support for the ATC260x PMICs. > > > > I assumed the patchset is ready for merging.. Did I miss something? > > The MFD driver needs another review. > > For some reason, this didn't register on my TODO list. You have already tagged v6 with 'Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>': https://lore.kernel.org/lkml/20210125142558.GA4903@dell/ I have submitted v7 to drop the patches that had been already picked up, as previously agreed, but otherwise there are no other changes. That is why I didn't expect another round of review.. > In general, if you don't receive a review within ~2 weeks of posting > (and the merge window is not open), you should consider it lost and > submit a [RESEND]. Thanks, Cristi [...] > -- > Lee Jones [李琼斯] > Senior Technical Lead - Developer Services > Linaro.org │ Open source software for Arm SoCs > Follow Linaro: Facebook | Twitter | Blog
On Mon, 22 Feb 2021, Cristian Ciocaltea wrote: > On Mon, Feb 22, 2021 at 09:02:47AM +0000, Lee Jones wrote: > > On Sun, 21 Feb 2021, Cristian Ciocaltea wrote: > > > > > Hi Lee, > > > > > > I have just noticed your mfd-next tag for 5.12 doesn't include the > > > support for the ATC260x PMICs. > > > > > > I assumed the patchset is ready for merging.. Did I miss something? > > > > The MFD driver needs another review. > > > > For some reason, this didn't register on my TODO list. > > You have already tagged v6 with 'Acked-for-MFD-by: Lee Jones > <lee.jones@linaro.org>': > https://lore.kernel.org/lkml/20210125142558.GA4903@dell/ > > I have submitted v7 to drop the patches that had been already picked up, > as previously agreed, but otherwise there are no other changes. > > That is why I didn't expect another round of review.. I see what's happened. You forgot to: "apply this as-is to your sign-off block" ... as requested, which made me think it needs a subsequent review. > > In general, if you don't receive a review within ~2 weeks of posting > > (and the merge window is not open), you should consider it lost and > > submit a [RESEND]. Due to the fragility of email reviews, this is still very important. -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog
On Mon, Feb 22, 2021 at 03:30:16PM +0000, Lee Jones wrote: > On Mon, 22 Feb 2021, Cristian Ciocaltea wrote: > > > On Mon, Feb 22, 2021 at 09:02:47AM +0000, Lee Jones wrote: > > > On Sun, 21 Feb 2021, Cristian Ciocaltea wrote: > > > > > > > Hi Lee, > > > > > > > > I have just noticed your mfd-next tag for 5.12 doesn't include the > > > > support for the ATC260x PMICs. > > > > > > > > I assumed the patchset is ready for merging.. Did I miss something? > > > > > > The MFD driver needs another review. > > > > > > For some reason, this didn't register on my TODO list. > > > > You have already tagged v6 with 'Acked-for-MFD-by: Lee Jones > > <lee.jones@linaro.org>': > > https://lore.kernel.org/lkml/20210125142558.GA4903@dell/ > > > > I have submitted v7 to drop the patches that had been already picked up, > > as previously agreed, but otherwise there are no other changes. > > > > That is why I didn't expect another round of review.. > > I see what's happened. You forgot to: > > "apply this as-is to your sign-off block" > > ... as requested, which made me think it needs a subsequent review. Sorry, I somehow missed that. Should I resend the patch series? If yes, I assume I should also increment the revision number, even though there are no other changes except the addition of the indicated tag. > > > In general, if you don't receive a review within ~2 weeks of posting > > > (and the merge window is not open), you should consider it lost and > > > submit a [RESEND]. > > Due to the fragility of email reviews, this is still very important. Right, thanks for the hint! > -- > Lee Jones [李琼斯] > Senior Technical Lead - Developer Services > Linaro.org │ Open source software for Arm SoCs > Follow Linaro: Facebook | Twitter | Blog
On Mon, 22 Feb 2021, Cristian Ciocaltea wrote: > On Mon, Feb 22, 2021 at 03:30:16PM +0000, Lee Jones wrote: > > On Mon, 22 Feb 2021, Cristian Ciocaltea wrote: > > > > > On Mon, Feb 22, 2021 at 09:02:47AM +0000, Lee Jones wrote: > > > > On Sun, 21 Feb 2021, Cristian Ciocaltea wrote: > > > > > > > > > Hi Lee, > > > > > > > > > > I have just noticed your mfd-next tag for 5.12 doesn't include the > > > > > support for the ATC260x PMICs. > > > > > > > > > > I assumed the patchset is ready for merging.. Did I miss something? > > > > > > > > The MFD driver needs another review. > > > > > > > > For some reason, this didn't register on my TODO list. > > > > > > You have already tagged v6 with 'Acked-for-MFD-by: Lee Jones > > > <lee.jones@linaro.org>': > > > https://lore.kernel.org/lkml/20210125142558.GA4903@dell/ > > > > > > I have submitted v7 to drop the patches that had been already picked up, > > > as previously agreed, but otherwise there are no other changes. > > > > > > That is why I didn't expect another round of review.. > > > > I see what's happened. You forgot to: > > > > "apply this as-is to your sign-off block" > > > > ... as requested, which made me think it needs a subsequent review. > > Sorry, I somehow missed that. Should I resend the patch series? No, no need. It's on my radar now. I'll see to it when v5.12 is out. > If yes, I assume I should also increment the revision number, even > though there are no other changes except the addition of the > indicated tag. When resending, you only have to s/PATCH/RESEND/. > > > > In general, if you don't receive a review within ~2 weeks of posting > > > > (and the merge window is not open), you should consider it lost and > > > > submit a [RESEND]. > > > > Due to the fragility of email reviews, this is still very important. > > Right, thanks for the hint! NP.
Enjoy!
The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-input-v5.13
for you to fetch changes up to b58c808ca46c163c1924ec5d3285e67e9217ec74:
MAINTAINERS: Add entry for ATC260x PMIC (2021-03-09 13:50:39 +0000)
----------------------------------------------------------------
Immutable branch between MFD and Input due for the v5.13 merge window
----------------------------------------------------------------
Cristian Ciocaltea (4):
dt-bindings: input: Add reset-time-sec common property
dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding
mfd: Add MFD driver for ATC260x PMICs
input: atc260x: Add onkey driver for ATC260x PMICs
Manivannan Sadhasivam (1):
MAINTAINERS: Add entry for ATC260x PMIC
Documentation/devicetree/bindings/input/input.yaml | 7 +
.../devicetree/bindings/mfd/actions,atc260x.yaml | 183 ++++++++++++
MAINTAINERS | 12 +
drivers/input/misc/Kconfig | 11 +
drivers/input/misc/Makefile | 2 +-
drivers/input/misc/atc260x-onkey.c | 305 ++++++++++++++++++++
drivers/mfd/Kconfig | 18 ++
drivers/mfd/Makefile | 3 +
drivers/mfd/atc260x-core.c | 310 +++++++++++++++++++++
drivers/mfd/atc260x-i2c.c | 64 +++++
include/linux/mfd/atc260x/atc2603c.h | 281 +++++++++++++++++++
include/linux/mfd/atc260x/atc2609a.h | 308 ++++++++++++++++++++
include/linux/mfd/atc260x/core.h | 58 ++++
13 files changed, 1561 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
create mode 100644 drivers/input/misc/atc260x-onkey.c
create mode 100644 drivers/mfd/atc260x-core.c
create mode 100644 drivers/mfd/atc260x-i2c.c
create mode 100644 include/linux/mfd/atc260x/atc2603c.h
create mode 100644 include/linux/mfd/atc260x/atc2609a.h
create mode 100644 include/linux/mfd/atc260x/core.h
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
On Tue, 09 Mar 2021, Lee Jones wrote: > Enjoy! > > The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8: > > Linux 5.12-rc1 (2021-02-28 16:05:19 -0800) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-input-v5.13 > > for you to fetch changes up to b58c808ca46c163c1924ec5d3285e67e9217ec74: > > MAINTAINERS: Add entry for ATC260x PMIC (2021-03-09 13:50:39 +0000) > > ---------------------------------------------------------------- > Immutable branch between MFD and Input due for the v5.13 merge window > > ---------------------------------------------------------------- > Cristian Ciocaltea (4): > dt-bindings: input: Add reset-time-sec common property > dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding > mfd: Add MFD driver for ATC260x PMICs > input: atc260x: Add onkey driver for ATC260x PMICs > > Manivannan Sadhasivam (1): > MAINTAINERS: Add entry for ATC260x PMIC > > Documentation/devicetree/bindings/input/input.yaml | 7 + > .../devicetree/bindings/mfd/actions,atc260x.yaml | 183 ++++++++++++ > MAINTAINERS | 12 + > drivers/input/misc/Kconfig | 11 + > drivers/input/misc/Makefile | 2 +- > drivers/input/misc/atc260x-onkey.c | 305 ++++++++++++++++++++ > drivers/mfd/Kconfig | 18 ++ > drivers/mfd/Makefile | 3 + > drivers/mfd/atc260x-core.c | 310 +++++++++++++++++++++ > drivers/mfd/atc260x-i2c.c | 64 +++++ > include/linux/mfd/atc260x/atc2603c.h | 281 +++++++++++++++++++ > include/linux/mfd/atc260x/atc2609a.h | 308 ++++++++++++++++++++ > include/linux/mfd/atc260x/core.h | 58 ++++ > 13 files changed, 1561 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml > create mode 100644 drivers/input/misc/atc260x-onkey.c > create mode 100644 drivers/mfd/atc260x-core.c > create mode 100644 drivers/mfd/atc260x-i2c.c > create mode 100644 include/linux/mfd/atc260x/atc2603c.h > create mode 100644 include/linux/mfd/atc260x/atc2609a.h > create mode 100644 include/linux/mfd/atc260x/core.h FYI, if anyone has pulled this, they should probably rebase it onto v5.12-rc2 and delete the v5.12-rc1 tag from their tree: https://lwn.net/Articles/848431/
Hi Lee, On Wed, Mar 10, 2021 at 11:12:50AM +0000, Lee Jones wrote: > On Tue, 09 Mar 2021, Lee Jones wrote: > > > On Tue, 09 Mar 2021, Lee Jones wrote: > > > > > Enjoy! > > > > > > The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8: > > > > > > Linux 5.12-rc1 (2021-02-28 16:05:19 -0800) > > > > > > are available in the Git repository at: > > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-input-v5.13 > > > > > > for you to fetch changes up to b58c808ca46c163c1924ec5d3285e67e9217ec74: > > > > > > MAINTAINERS: Add entry for ATC260x PMIC (2021-03-09 13:50:39 +0000) > > > > > > ---------------------------------------------------------------- > > > Immutable branch between MFD and Input due for the v5.13 merge window > > > > > > ---------------------------------------------------------------- > > > Cristian Ciocaltea (4): > > > dt-bindings: input: Add reset-time-sec common property > > > dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding > > > mfd: Add MFD driver for ATC260x PMICs > > > input: atc260x: Add onkey driver for ATC260x PMICs > > > > > > Manivannan Sadhasivam (1): > > > MAINTAINERS: Add entry for ATC260x PMIC > > > > > > Documentation/devicetree/bindings/input/input.yaml | 7 + > > > .../devicetree/bindings/mfd/actions,atc260x.yaml | 183 ++++++++++++ > > > MAINTAINERS | 12 + > > > drivers/input/misc/Kconfig | 11 + > > > drivers/input/misc/Makefile | 2 +- > > > drivers/input/misc/atc260x-onkey.c | 305 ++++++++++++++++++++ > > > drivers/mfd/Kconfig | 18 ++ > > > drivers/mfd/Makefile | 3 + > > > drivers/mfd/atc260x-core.c | 310 +++++++++++++++++++++ > > > drivers/mfd/atc260x-i2c.c | 64 +++++ > > > include/linux/mfd/atc260x/atc2603c.h | 281 +++++++++++++++++++ > > > include/linux/mfd/atc260x/atc2609a.h | 308 ++++++++++++++++++++ > > > include/linux/mfd/atc260x/core.h | 58 ++++ > > > 13 files changed, 1561 insertions(+), 1 deletion(-) > > > create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml > > > create mode 100644 drivers/input/misc/atc260x-onkey.c > > > create mode 100644 drivers/mfd/atc260x-core.c > > > create mode 100644 drivers/mfd/atc260x-i2c.c > > > create mode 100644 include/linux/mfd/atc260x/atc2603c.h > > > create mode 100644 include/linux/mfd/atc260x/atc2609a.h > > > create mode 100644 include/linux/mfd/atc260x/core.h > > > > FYI, if anyone has pulled this, they should probably rebase it onto > > v5.12-rc2 and delete the v5.12-rc1 tag from their tree: > > > > https://lwn.net/Articles/848431/ > > In case you haven't pulled this yet, I created a new tag: > > ib-mfd-input-v5.13-1 Did you push this one out? I can't seem to see it. Thanks.
On Thu, 25 Mar 2021, Dmitry Torokhov wrote: > Hi Lee, > > On Wed, Mar 10, 2021 at 11:12:50AM +0000, Lee Jones wrote: > > On Tue, 09 Mar 2021, Lee Jones wrote: > > > > > On Tue, 09 Mar 2021, Lee Jones wrote: > > > > > > > Enjoy! > > > > > > > > The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8: > > > > > > > > Linux 5.12-rc1 (2021-02-28 16:05:19 -0800) > > > > > > > > are available in the Git repository at: > > > > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-input-v5.13 > > > > > > > > for you to fetch changes up to b58c808ca46c163c1924ec5d3285e67e9217ec74: > > > > > > > > MAINTAINERS: Add entry for ATC260x PMIC (2021-03-09 13:50:39 +0000) > > > > > > > > ---------------------------------------------------------------- > > > > Immutable branch between MFD and Input due for the v5.13 merge window > > > > > > > > ---------------------------------------------------------------- > > > > Cristian Ciocaltea (4): > > > > dt-bindings: input: Add reset-time-sec common property > > > > dt-bindings: mfd: Add Actions Semi ATC260x PMIC binding > > > > mfd: Add MFD driver for ATC260x PMICs > > > > input: atc260x: Add onkey driver for ATC260x PMICs > > > > > > > > Manivannan Sadhasivam (1): > > > > MAINTAINERS: Add entry for ATC260x PMIC > > > > > > > > Documentation/devicetree/bindings/input/input.yaml | 7 + > > > > .../devicetree/bindings/mfd/actions,atc260x.yaml | 183 ++++++++++++ > > > > MAINTAINERS | 12 + > > > > drivers/input/misc/Kconfig | 11 + > > > > drivers/input/misc/Makefile | 2 +- > > > > drivers/input/misc/atc260x-onkey.c | 305 ++++++++++++++++++++ > > > > drivers/mfd/Kconfig | 18 ++ > > > > drivers/mfd/Makefile | 3 + > > > > drivers/mfd/atc260x-core.c | 310 +++++++++++++++++++++ > > > > drivers/mfd/atc260x-i2c.c | 64 +++++ > > > > include/linux/mfd/atc260x/atc2603c.h | 281 +++++++++++++++++++ > > > > include/linux/mfd/atc260x/atc2609a.h | 308 ++++++++++++++++++++ > > > > include/linux/mfd/atc260x/core.h | 58 ++++ > > > > 13 files changed, 1561 insertions(+), 1 deletion(-) > > > > create mode 100644 Documentation/devicetree/bindings/mfd/actions,atc260x.yaml > > > > create mode 100644 drivers/input/misc/atc260x-onkey.c > > > > create mode 100644 drivers/mfd/atc260x-core.c > > > > create mode 100644 drivers/mfd/atc260x-i2c.c > > > > create mode 100644 include/linux/mfd/atc260x/atc2603c.h > > > > create mode 100644 include/linux/mfd/atc260x/atc2609a.h > > > > create mode 100644 include/linux/mfd/atc260x/core.h > > > > > > FYI, if anyone has pulled this, they should probably rebase it onto > > > v5.12-rc2 and delete the v5.12-rc1 tag from their tree: > > > > > > https://lwn.net/Articles/848431/ > > > > In case you haven't pulled this yet, I created a new tag: > > > > ib-mfd-input-v5.13-1 > > Did you push this one out? I can't seem to see it. Seemingly not. Thanks for the poke.