diff mbox series

dt-bindings: mtd: spi-nor: Convert to DT schema format

Message ID 20210202175340.3902494-1-robh@kernel.org
State New
Headers show
Series dt-bindings: mtd: spi-nor: Convert to DT schema format | expand

Commit Message

Rob Herring (Arm) Feb. 2, 2021, 5:53 p.m. UTC
Convert the SPI-NOR binding to DT schema format. Like other memory chips,
the compatible strings are a mess with vendor prefixes not being used
consistently and some compatibles not documented. The resulting schema
passes on 'compatible' checks for most in tree users with the exception
of some oddballs.

I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear
to be used anywhere.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>

---
 .../devicetree/bindings/mtd/jedec,spi-nor.txt |  91 ----------------
 .../bindings/mtd/jedec,spi-nor.yaml           | 102 ++++++++++++++++++
 2 files changed, 102 insertions(+), 91 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
 create mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Comments

Rob Herring (Arm) Feb. 9, 2021, 9:23 p.m. UTC | #1
On Tue, 02 Feb 2021 11:53:39 -0600, Rob Herring wrote:
> Convert the SPI-NOR binding to DT schema format. Like other memory chips,

> the compatible strings are a mess with vendor prefixes not being used

> consistently and some compatibles not documented. The resulting schema

> passes on 'compatible' checks for most in tree users with the exception

> of some oddballs.

> 

> I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear

> to be used anywhere.

> 

> Cc: Miquel Raynal <miquel.raynal@bootlin.com>

> Cc: Richard Weinberger <richard@nod.at>

> Cc: Vignesh Raghavendra <vigneshr@ti.com>

> Cc: linux-mtd@lists.infradead.org

> Signed-off-by: Rob Herring <robh@kernel.org>

> ---

>  .../devicetree/bindings/mtd/jedec,spi-nor.txt |  91 ----------------

>  .../bindings/mtd/jedec,spi-nor.yaml           | 102 ++++++++++++++++++

>  2 files changed, 102 insertions(+), 91 deletions(-)

>  delete mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

>  create mode 100644 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

> 


Applied, thanks!

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Geert Uytterhoeven Feb. 16, 2021, 9:12 a.m. UTC | #2
Hi Rob,

On Tue, Feb 2, 2021 at 6:54 PM Rob Herring <robh@kernel.org> wrote:
> Convert the SPI-NOR binding to DT schema format. Like other memory chips,

> the compatible strings are a mess with vendor prefixes not being used

> consistently and some compatibles not documented. The resulting schema

> passes on 'compatible' checks for most in tree users with the exception

> of some oddballs.

>

> I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear

> to be used anywhere.

>

> Cc: Miquel Raynal <miquel.raynal@bootlin.com>

> Cc: Richard Weinberger <richard@nod.at>

> Cc: Vignesh Raghavendra <vigneshr@ti.com>

> Cc: linux-mtd@lists.infradead.org

> Signed-off-by: Rob Herring <robh@kernel.org>


Thanks for your patch!

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

> @@ -0,0 +1,102 @@

> +# SPDX-License-Identifier: GPL-2.0-only

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: SPI NOR flash ST M25Pxx (and similar) serial flash chips

> +

> +maintainers:

> +  - Rob Herring <robh@kernel.org>

> +

> +properties:

> +  compatible:

> +    oneOf:

> +      - items:

> +          - pattern: "^((((micron|spansion|st),)?\

> +              (m25p(40|80|16|32|64|128)|\

> +              n25q(32b|064|128a11|128a13|256a|512a|164k)))|\

> +              atmel,at25df(321a|641|081a)|\

> +              everspin,mr25h(10|40|128|256)|\

> +              (mxicy|macronix),mx25l(4005a|1606e|6405d|8005|12805d|25635e)|\

> +              (mxicy|macronix),mx25u(4033|4035)|\

> +              (spansion,)?s25fl(128s|256s1|512s|008k|064k|164k)|\

> +              (sst|microchip),sst25vf(016b|032b|040b)|\

> +              (sst,)?sst26wf016b|\

> +              (sst,)?sst25wf(040b|080)|\

> +              winbond,w25x(80|32)|\

> +              (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$"

> +          - const: jedec,spi-nor

> +      - items:

> +          - enum:

> +              - issi,is25lp016d

> +              - micron,mt25qu02g

> +              - mxicy,mx25r1635f

> +              - mxicy,mx25u6435f

> +              - mxicy,mx25v8035f

> +              - spansion,s25sl12801

> +              - spansion,s25fs512s

> +          - const: jedec,spi-nor

> +      - const: jedec,spi-nor

> +    description:

> +      Must also include "jedec,spi-nor" for any SPI NOR flash that can be

> +      identified by the JEDEC READ ID opcode (0x9F).


Is there any value in keeping this paragraph?
The schema already requires "jedec,spi-nor".

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
deleted file mode 100644
index f03be904d3c2..000000000000
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ /dev/null
@@ -1,91 +0,0 @@ 
-* SPI NOR flash: ST M25Pxx (and similar) serial flash chips
-
-Required properties:
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-  representing partitions.
-- compatible : May include a device-specific string consisting of the
-               manufacturer and name of the chip. A list of supported chip
-               names follows.
-               Must also include "jedec,spi-nor" for any SPI NOR flash that can
-               be identified by the JEDEC READ ID opcode (0x9F).
-
-               Supported chip names:
-                 at25df321a
-                 at25df641
-                 at26df081a
-                 mr25h128
-                 mr25h256
-                 mr25h10
-                 mr25h40
-                 mx25l4005a
-                 mx25l1606e
-                 mx25l6405d
-                 mx25l12805d
-                 mx25l25635e
-                 n25q064
-                 n25q128a11
-                 n25q128a13
-                 n25q512a
-                 s25fl256s1
-                 s25fl512s
-                 s25sl12801
-                 s25fl008k
-                 s25fl064k
-                 sst25vf040b
-                 m25p40
-                 m25p80
-                 m25p16
-                 m25p32
-                 m25p64
-                 m25p128
-                 w25x80
-                 w25x32
-                 w25q32
-                 w25q64
-                 w25q32dw
-                 w25q80bl
-                 w25q128
-                 w25q256
-
-               The following chip names have been used historically to
-               designate quirky versions of flash chips that do not support the
-               JEDEC READ ID opcode (0x9F):
-                 m25p05-nonjedec
-                 m25p10-nonjedec
-                 m25p20-nonjedec
-                 m25p40-nonjedec
-                 m25p80-nonjedec
-                 m25p16-nonjedec
-                 m25p32-nonjedec
-                 m25p64-nonjedec
-                 m25p128-nonjedec
-
-- reg : Chip-Select number
-- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
-
-Optional properties:
-- m25p,fast-read : Use the "fast read" opcode to read data from the chip instead
-                   of the usual "read" opcode. This opcode is not supported by
-                   all chips and support for it can not be detected at runtime.
-                   Refer to your chips' datasheet to check if this is supported
-                   by your chip.
-- broken-flash-reset : Some flash devices utilize stateful addressing modes
-		   (e.g., for 32-bit addressing) which need to be managed
-		   carefully by a system. Because these sorts of flash don't
-		   have a standardized software reset command, and because some
-		   systems don't toggle the flash RESET# pin upon system reset
-		   (if the pin even exists at all), there are systems which
-		   cannot reboot properly if the flash is left in the "wrong"
-		   state. This boolean flag can be used on such systems, to
-		   denote the absence of a reliable reset mechanism.
-
-Example:
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,m25p80", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		m25p,fast-read;
-	};
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
new file mode 100644
index 000000000000..5e7e5349f9a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI NOR flash ST M25Pxx (and similar) serial flash chips
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: "^((((micron|spansion|st),)?\
+              (m25p(40|80|16|32|64|128)|\
+              n25q(32b|064|128a11|128a13|256a|512a|164k)))|\
+              atmel,at25df(321a|641|081a)|\
+              everspin,mr25h(10|40|128|256)|\
+              (mxicy|macronix),mx25l(4005a|1606e|6405d|8005|12805d|25635e)|\
+              (mxicy|macronix),mx25u(4033|4035)|\
+              (spansion,)?s25fl(128s|256s1|512s|008k|064k|164k)|\
+              (sst|microchip),sst25vf(016b|032b|040b)|\
+              (sst,)?sst26wf016b|\
+              (sst,)?sst25wf(040b|080)|\
+              winbond,w25x(80|32)|\
+              (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$"
+          - const: jedec,spi-nor
+      - items:
+          - enum:
+              - issi,is25lp016d
+              - micron,mt25qu02g
+              - mxicy,mx25r1635f
+              - mxicy,mx25u6435f
+              - mxicy,mx25v8035f
+              - spansion,s25sl12801
+              - spansion,s25fs512s
+          - const: jedec,spi-nor
+      - const: jedec,spi-nor
+    description:
+      Must also include "jedec,spi-nor" for any SPI NOR flash that can be
+      identified by the JEDEC READ ID opcode (0x9F).
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency: true
+  spi-rx-bus-width: true
+  spi-tx-bus-width: true
+
+  m25p,fast-read:
+    type: boolean
+    description:
+      Use the "fast read" opcode to read data from the chip instead of the usual
+      "read" opcode. This opcode is not supported by all chips and support for
+      it can not be detected at runtime. Refer to your chips' datasheet to check
+      if this is supported by your chip.
+
+  broken-flash-reset:
+    type: boolean
+    description:
+      Some flash devices utilize stateful addressing modes (e.g., for 32-bit
+      addressing) which need to be managed carefully by a system. Because these
+      sorts of flash don't have a standardized software reset command, and
+      because some systems don't toggle the flash RESET# pin upon system reset
+      (if the pin even exists at all), there are systems which cannot reboot
+      properly if the flash is left in the "wrong" state. This boolean flag can
+      be used on such systems, to denote the absence of a reliable reset
+      mechanism.
+
+  label: true
+
+  partitions:
+    type: object
+
+  '#address-cells': true
+  '#size-cells': true
+
+patternProperties:
+  # Note: use 'partitions' node for new users
+  '^partition@':
+    type: object
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+            m25p,fast-read;
+        };
+    };
+...