drivers: scsi: lpfc: Mundane spelling and sentence construction fixes throughout the file

Few spellings and sentence  construction done throughout the file.


Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
---
 drivers/scsi/lpfc/lpfc_init.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--
2.30.0

On 2/4/21 9:30 PM, Bhaskar Chowdhury wrote:
> 
> 
> Few spellings and sentence  construction done throughout the file.
> 
> 
> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
> ---
>  drivers/scsi/lpfc/lpfc_init.c | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index ac67f420ec26..923fadb7945a 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -11022,7 +11022,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
>  			/* We found a matching phys_id, so copy the IRQ info */
>  			cpup->eq = new_cpup->eq;
> 
> -			/* Bump start_cpu to the next slot to minmize the
> +			/* Bump start_cpu to the next slot to minimize the

OK.

>  			 * chance of having multiple unassigned CPU entries
>  			 * selecting the same IRQ.
>  			 */
> @@ -11076,7 +11076,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
>  			/* We found an available entry, copy the IRQ info */
>  			cpup->eq = new_cpup->eq;
> 
> -			/* Bump start_cpu to the next slot to minmize the
> +			/* Bump start_cpu to the next slot to minimize the

OK.

>  			 * chance of having multiple unassigned CPU entries
>  			 * selecting the same IRQ.
>  			 */
> @@ -11246,14 +11246,14 @@ lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
>  		if (!maskp)
>  			continue;
>  		/*
> -		 * if irq is not affinitized to the cpu going

Original may not be a real word, but it conveys the meaning better
than the proposed change does.

> +		 * if irq is not affinities to the cpu going
>  		 * then we don't need to poll the eq attached
>  		 * to it.
>  		 */
>  		if (!cpumask_and(tmp, maskp, cpumask_of(cpu)))
>  			continue;
> -		/* get the cpus that are online and are affini-
> -		 * tized to this irq vector.  If the count is
> +		/* get the cpus that are online and are affinities
> +		 * to this irq vector.  If the count is

ditto.

>  		 * more than 1 then cpuhp is not going to shut-
>  		 * down this vector.  Since this cpu has not
>  		 * gone offline yet, we need >1.
> @@ -11367,7 +11367,7 @@ lpfc_irq_clear_aff(struct lpfc_hba_eq_hdl *eqhdl)
>   * online cpu on the phba's original_mask and migrate all offlining IRQ
>   * affinities.
>   *
> - * If cpu is coming online, reaffinitize the IRQ back to the onlining cpu.
> + * If cpu is coming online, again affinities the IRQ back to the on lining cpu.

ditto.

>   *
>   * Note: Call only if NUMA or NHT mode is enabled, otherwise rely on
>   *	 PCI_IRQ_AFFINITY to auto-manage IRQ affinity.
> @@ -11401,7 +11401,7 @@ lpfc_irq_rebalance(struct lpfc_hba *phba, unsigned int cpu, bool offline)
> 
>  		/* Found a valid CPU */
>  		if ((cpu_select < nr_cpu_ids) && (cpu_select != cpu)) {
> -			/* Go through each eqhdl and ensure offlining

The original looks good to me.

> +			/* Go through each eqhdl and ensure off lining
>  			 * cpu aff_mask is migrated
>  			 */
>  			for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
> @@ -11597,7 +11597,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
>  				 * this vector, set LPFC_CPU_FIRST_IRQ.
>  				 *
>  				 * With certain platforms its possible that irq
> -				 * vectors are affinitized to all the cpu's.

Original is better.

> +				 * vectors are affinities to all the cpu's.
>  				 * This can result in each cpu_map.eq to be set
>  				 * to the last vector, resulting in overwrite
>  				 * of all the previous cpu_map.eq.  Ensure that
> @@ -11635,7 +11635,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
>  		free_irq(eqhdl->irq, eqhdl);
>  	}
> 
> -	/* Unconfigure MSI-X capability structure */

ditto.

> +	/* Not configure MSI-X capability structure */
>  	pci_free_irq_vectors(phba->pcidev);
> 
>  vec_fail_out:
> @@ -11744,7 +11744,7 @@ lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
>  		}
>  	}
> 
> -	/* Fallback to INTx if both MSI-X/MSI initalization failed */
> +	/* Fallback to INTx if both MSI-X/MSI initialization failed */

OK.

>  	if (phba->intr_type == NONE) {
>  		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
>  				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
> @@ -12479,7 +12479,7 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
>   * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
>   * @pdev: pointer to PCI device
>   *
> - * This routine is to be called to disattach a device with SLI-3 interface

detach

> + * This routine is to be called to not attach a device with SLI-3 interface
>   * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
>   * removed from PCI bus, it performs all the necessary cleanup for the HBA
>   * device to be removed from the PCI subsystem properly.
> @@ -12940,7 +12940,7 @@ lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
>  	/* Three cases:  (1) FW was not supported on the detected adapter.
>  	 * (2) FW update has been locked out administratively.
>  	 * (3) Some other error during FW update.
> -	 * In each case, an unmaskable message is written to the console

Original conveys the message better than the proposed change.

> +	 * In each case, an unusable message is written to the console
>  	 * for admin diagnosis.
>  	 */
>  	if (offset == ADD_STATUS_FW_NOT_SUPPORTED ||
> --
> 2.30.0
>