diff mbox series

[v3,2/5] ACPI: battery: Clean up printing messages

Message ID 1731128.lCOlkKr4QW@kreacher
State New
Headers show
Series ACPI: More cleanups related to printing messages | expand

Commit Message

Rafael J. Wysocki Feb. 3, 2021, 6:44 p.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.

Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
definition from the headers and update the documentation accordingly.

While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c.  Also adapt the existing
pr_info() calls to the new pr_fmt() definition.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v2 -> v3: Also adapt the existing pr_info() calls to the new pr_fmt()
          definition.

v1 -> v2: Changelog update.

---
 Documentation/firmware-guide/acpi/debug.rst |    1 
 drivers/acpi/battery.c                      |   33 +++++++++++++---------------
 drivers/acpi/sysfs.c                        |    1 
 include/acpi/acpi_drivers.h                 |    1 
 4 files changed, 16 insertions(+), 20 deletions(-)

Comments

Hanjun Guo Feb. 4, 2021, 1:18 a.m. UTC | #1
On 2021/2/4 2:44, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki<rafael.j.wysocki@intel.com>
> 
> Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
> in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
> respectively, which among other things causes the excessive log
> level of the messages previously printed via ACPI_EXCEPTION() to
> be increased.
> 
> Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
> used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
> definition from the headers and update the documentation accordingly.
> 
> While at it, update the pr_fmt() definition and drop the unneeded
> PREFIX sybmbol definition from battery.c.  Also adapt the existing
> pr_info() calls to the new pr_fmt() definition.
> 
> Signed-off-by: Rafael J. Wysocki<rafael.j.wysocki@intel.com>

Reviewed-by: Hanjun Guo <guohanjun@huawei.com>

Thanks
Hanjun
Hans de Goede Feb. 4, 2021, 6:27 p.m. UTC | #2
Hi,

On 2/3/21 7:44 PM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
> in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
> respectively, which among other things causes the excessive log
> level of the messages previously printed via ACPI_EXCEPTION() to
> be increased.
> 
> Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
> used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
> definition from the headers and update the documentation accordingly.
> 
> While at it, update the pr_fmt() definition and drop the unneeded
> PREFIX sybmbol definition from battery.c.  Also adapt the existing
> pr_info() calls to the new pr_fmt() definition.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> v2 -> v3: Also adapt the existing pr_info() calls to the new pr_fmt()
>           definition.
> 
> v1 -> v2: Changelog update.
> 
> ---
>  Documentation/firmware-guide/acpi/debug.rst |    1 
>  drivers/acpi/battery.c                      |   33 +++++++++++++---------------
>  drivers/acpi/sysfs.c                        |    1 
>  include/acpi/acpi_drivers.h                 |    1 
>  4 files changed, 16 insertions(+), 20 deletions(-)
> 
> Index: linux-pm/drivers/acpi/battery.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/battery.c
> +++ linux-pm/drivers/acpi/battery.c
> @@ -8,7 +8,7 @@
>   *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
>   */
>  
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +#define pr_fmt(fmt) "ACPI: battery: " fmt
>  
>  #include <linux/async.h>
>  #include <linux/delay.h>
> @@ -29,8 +29,6 @@
>  
>  #include <acpi/battery.h>
>  
> -#define PREFIX "ACPI: "
> -
>  #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
>  #define ACPI_BATTERY_CAPACITY_VALID(capacity) \
>  	((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN)
> @@ -44,10 +42,6 @@
>  #define ACPI_BATTERY_STATE_CHARGING	0x2
>  #define ACPI_BATTERY_STATE_CRITICAL	0x4
>  
> -#define _COMPONENT		ACPI_BATTERY_COMPONENT
> -
> -ACPI_MODULE_NAME("battery");
> -
>  MODULE_AUTHOR("Paul Diefenbaugh");
>  MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>");
>  MODULE_DESCRIPTION("ACPI Battery Driver");
> @@ -466,7 +460,8 @@ static int extract_package(struct acpi_b
>  static int acpi_battery_get_status(struct acpi_battery *battery)
>  {
>  	if (acpi_bus_get_status(battery->device)) {
> -		ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
> +		acpi_handle_info(battery->device->handle,
> +				 "_STA evaluation failed\n");

Missing ": %s", acpi_format_exception(status), or is that intentional
(I did not see this mentioned in the commit msg) ?

With that fixed, or explained, this is:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans




>  		return -ENODEV;
>  	}
>  	return 0;
> @@ -535,8 +530,10 @@ static int acpi_battery_get_info(struct
>  		mutex_unlock(&battery->lock);
>  
>  		if (ACPI_FAILURE(status)) {
> -			ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s",
> -					use_bix ? "_BIX":"_BIF"));
> +			acpi_handle_info(battery->device->handle,
> +					 "%s evaluation failed: %s\n",
> +					 use_bix ?"_BIX":"_BIF",
> +				         acpi_format_exception(status));
>  		} else {
>  			result = extract_battery_info(use_bix,
>  						      battery,
> @@ -573,7 +570,9 @@ static int acpi_battery_get_state(struct
>  	mutex_unlock(&battery->lock);
>  
>  	if (ACPI_FAILURE(status)) {
> -		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST"));
> +		acpi_handle_info(battery->device->handle,
> +				 "_BST evaluation failed: %s",
> +				 acpi_format_exception(status));
>  		return -ENODEV;
>  	}
>  
> @@ -590,7 +589,7 @@ static int acpi_battery_get_state(struct
>  		battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN &&
>  		(s16)(battery->rate_now) < 0) {
>  		battery->rate_now = abs((s16)battery->rate_now);
> -		pr_warn_once(FW_BUG "battery: (dis)charge rate invalid.\n");
> +		pr_warn_once(FW_BUG "(dis)charge rate invalid.\n");
>  	}
>  
>  	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
> @@ -625,7 +624,9 @@ static int acpi_battery_set_alarm(struct
>  	if (ACPI_FAILURE(status))
>  		return -ENODEV;
>  
> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Alarm set to %d\n", battery->alarm));
> +	acpi_handle_debug(battery->device->handle, "Alarm set to %d\n",
> +			  battery->alarm);
> +
>  	return 0;
>  }
>  
> @@ -1201,8 +1202,7 @@ static int acpi_battery_add(struct acpi_
>  	if (result)
>  		goto fail;
>  
> -	pr_info(PREFIX "%s Slot [%s] (battery %s)\n",
> -		ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
> +	pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device),
>  		device->status.battery_present ? "present" : "absent");
>  
>  	battery->pm_nb.notifier_call = battery_notify;
> @@ -1282,8 +1282,7 @@ static void __init acpi_battery_init_asy
>  	if (battery_check_pmic) {
>  		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)
>  			if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {
> -				pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME
> -					": found native %s PMIC, not loading\n",
> +				pr_info("found native %s PMIC, not loading\n",
>  					acpi_battery_blacklist[i]);
>  				return;
>  			}
> Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst
> ===================================================================
> --- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst
> +++ linux-pm/Documentation/firmware-guide/acpi/debug.rst
> @@ -52,7 +52,6 @@ shows the supported mask values, current
>      ACPI_CA_DISASSEMBLER            0x00000800
>      ACPI_COMPILER                   0x00001000
>      ACPI_TOOLS                      0x00002000
> -    ACPI_BATTERY_COMPONENT          0x00040000
>      ACPI_BUTTON_COMPONENT           0x00080000
>      ACPI_SBS_COMPONENT              0x00100000
>      ACPI_FAN_COMPONENT              0x00200000
> Index: linux-pm/drivers/acpi/sysfs.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/sysfs.c
> +++ linux-pm/drivers/acpi/sysfs.c
> @@ -52,7 +52,6 @@ static const struct acpi_dlayer acpi_deb
>  	ACPI_DEBUG_INIT(ACPI_COMPILER),
>  	ACPI_DEBUG_INIT(ACPI_TOOLS),
>  
> -	ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
>  	ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
>  	ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
>  	ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
> Index: linux-pm/include/acpi/acpi_drivers.h
> ===================================================================
> --- linux-pm.orig/include/acpi/acpi_drivers.h
> +++ linux-pm/include/acpi/acpi_drivers.h
> @@ -15,7 +15,6 @@
>   * Please update drivers/acpi/debug.c and Documentation/firmware-guide/acpi/debug.rst
>   * if you add to this list.
>   */
> -#define ACPI_BATTERY_COMPONENT		0x00040000
>  #define ACPI_BUTTON_COMPONENT		0x00080000
>  #define ACPI_SBS_COMPONENT		0x00100000
>  #define ACPI_FAN_COMPONENT		0x00200000
> 
> 
>
Hans de Goede Feb. 4, 2021, 6:31 p.m. UTC | #3
Hi,

On 2/4/21 7:27 PM, Hans de Goede wrote:
> Hi,

> 

> On 2/3/21 7:44 PM, Rafael J. Wysocki wrote:

>> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

>>

>> Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances

>> in battery.c with acpi_handle_debug() and acpi_handle_info() calls,

>> respectively, which among other things causes the excessive log

>> level of the messages previously printed via ACPI_EXCEPTION() to

>> be increased.

>>

>> Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not

>> used any more, drop the no longer needed ACPI_BATTERY_COMPONENT

>> definition from the headers and update the documentation accordingly.

>>

>> While at it, update the pr_fmt() definition and drop the unneeded

>> PREFIX sybmbol definition from battery.c.  Also adapt the existing

>> pr_info() calls to the new pr_fmt() definition.

>>

>> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

>> ---

>>

>> v2 -> v3: Also adapt the existing pr_info() calls to the new pr_fmt()

>>           definition.

>>

>> v1 -> v2: Changelog update.

>>

>> ---

>>  Documentation/firmware-guide/acpi/debug.rst |    1 

>>  drivers/acpi/battery.c                      |   33 +++++++++++++---------------

>>  drivers/acpi/sysfs.c                        |    1 

>>  include/acpi/acpi_drivers.h                 |    1 

>>  4 files changed, 16 insertions(+), 20 deletions(-)

>>

>> Index: linux-pm/drivers/acpi/battery.c

>> ===================================================================

>> --- linux-pm.orig/drivers/acpi/battery.c

>> +++ linux-pm/drivers/acpi/battery.c

>> @@ -8,7 +8,7 @@

>>   *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>

>>   */

>>  

>> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

>> +#define pr_fmt(fmt) "ACPI: battery: " fmt

>>  

>>  #include <linux/async.h>

>>  #include <linux/delay.h>

>> @@ -29,8 +29,6 @@

>>  

>>  #include <acpi/battery.h>

>>  

>> -#define PREFIX "ACPI: "

>> -

>>  #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF

>>  #define ACPI_BATTERY_CAPACITY_VALID(capacity) \

>>  	((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN)

>> @@ -44,10 +42,6 @@

>>  #define ACPI_BATTERY_STATE_CHARGING	0x2

>>  #define ACPI_BATTERY_STATE_CRITICAL	0x4

>>  

>> -#define _COMPONENT		ACPI_BATTERY_COMPONENT

>> -

>> -ACPI_MODULE_NAME("battery");

>> -

>>  MODULE_AUTHOR("Paul Diefenbaugh");

>>  MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>");

>>  MODULE_DESCRIPTION("ACPI Battery Driver");

>> @@ -466,7 +460,8 @@ static int extract_package(struct acpi_b

>>  static int acpi_battery_get_status(struct acpi_battery *battery)

>>  {

>>  	if (acpi_bus_get_status(battery->device)) {

>> -		ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));

>> +		acpi_handle_info(battery->device->handle,

>> +				 "_STA evaluation failed\n");

> 

> Missing ": %s", acpi_format_exception(status), or is that intentional

> (I did not see this mentioned in the commit msg) ?


Ah, after noticing that you did the same thing in patch 4/5 and there
the passed in status was bogus, I now notice that the status here
was hard-coded to AE_ERROR, so not meaningful.

That answers my own question, so this is:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>


As is.

Regards,

Hans




>>  		return -ENODEV;

>>  	}

>>  	return 0;

>> @@ -535,8 +530,10 @@ static int acpi_battery_get_info(struct

>>  		mutex_unlock(&battery->lock);

>>  

>>  		if (ACPI_FAILURE(status)) {

>> -			ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s",

>> -					use_bix ? "_BIX":"_BIF"));

>> +			acpi_handle_info(battery->device->handle,

>> +					 "%s evaluation failed: %s\n",

>> +					 use_bix ?"_BIX":"_BIF",

>> +				         acpi_format_exception(status));

>>  		} else {

>>  			result = extract_battery_info(use_bix,

>>  						      battery,

>> @@ -573,7 +570,9 @@ static int acpi_battery_get_state(struct

>>  	mutex_unlock(&battery->lock);

>>  

>>  	if (ACPI_FAILURE(status)) {

>> -		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST"));

>> +		acpi_handle_info(battery->device->handle,

>> +				 "_BST evaluation failed: %s",

>> +				 acpi_format_exception(status));

>>  		return -ENODEV;

>>  	}

>>  

>> @@ -590,7 +589,7 @@ static int acpi_battery_get_state(struct

>>  		battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN &&

>>  		(s16)(battery->rate_now) < 0) {

>>  		battery->rate_now = abs((s16)battery->rate_now);

>> -		pr_warn_once(FW_BUG "battery: (dis)charge rate invalid.\n");

>> +		pr_warn_once(FW_BUG "(dis)charge rate invalid.\n");

>>  	}

>>  

>>  	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)

>> @@ -625,7 +624,9 @@ static int acpi_battery_set_alarm(struct

>>  	if (ACPI_FAILURE(status))

>>  		return -ENODEV;

>>  

>> -	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Alarm set to %d\n", battery->alarm));

>> +	acpi_handle_debug(battery->device->handle, "Alarm set to %d\n",

>> +			  battery->alarm);

>> +

>>  	return 0;

>>  }

>>  

>> @@ -1201,8 +1202,7 @@ static int acpi_battery_add(struct acpi_

>>  	if (result)

>>  		goto fail;

>>  

>> -	pr_info(PREFIX "%s Slot [%s] (battery %s)\n",

>> -		ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),

>> +	pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device),

>>  		device->status.battery_present ? "present" : "absent");

>>  

>>  	battery->pm_nb.notifier_call = battery_notify;

>> @@ -1282,8 +1282,7 @@ static void __init acpi_battery_init_asy

>>  	if (battery_check_pmic) {

>>  		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)

>>  			if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {

>> -				pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME

>> -					": found native %s PMIC, not loading\n",

>> +				pr_info("found native %s PMIC, not loading\n",

>>  					acpi_battery_blacklist[i]);

>>  				return;

>>  			}

>> Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst

>> ===================================================================

>> --- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst

>> +++ linux-pm/Documentation/firmware-guide/acpi/debug.rst

>> @@ -52,7 +52,6 @@ shows the supported mask values, current

>>      ACPI_CA_DISASSEMBLER            0x00000800

>>      ACPI_COMPILER                   0x00001000

>>      ACPI_TOOLS                      0x00002000

>> -    ACPI_BATTERY_COMPONENT          0x00040000

>>      ACPI_BUTTON_COMPONENT           0x00080000

>>      ACPI_SBS_COMPONENT              0x00100000

>>      ACPI_FAN_COMPONENT              0x00200000

>> Index: linux-pm/drivers/acpi/sysfs.c

>> ===================================================================

>> --- linux-pm.orig/drivers/acpi/sysfs.c

>> +++ linux-pm/drivers/acpi/sysfs.c

>> @@ -52,7 +52,6 @@ static const struct acpi_dlayer acpi_deb

>>  	ACPI_DEBUG_INIT(ACPI_COMPILER),

>>  	ACPI_DEBUG_INIT(ACPI_TOOLS),

>>  

>> -	ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),

>>  	ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),

>>  	ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),

>>  	ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),

>> Index: linux-pm/include/acpi/acpi_drivers.h

>> ===================================================================

>> --- linux-pm.orig/include/acpi/acpi_drivers.h

>> +++ linux-pm/include/acpi/acpi_drivers.h

>> @@ -15,7 +15,6 @@

>>   * Please update drivers/acpi/debug.c and Documentation/firmware-guide/acpi/debug.rst

>>   * if you add to this list.

>>   */

>> -#define ACPI_BATTERY_COMPONENT		0x00040000

>>  #define ACPI_BUTTON_COMPONENT		0x00080000

>>  #define ACPI_SBS_COMPONENT		0x00100000

>>  #define ACPI_FAN_COMPONENT		0x00200000

>>

>>

>>
diff mbox series

Patch

Index: linux-pm/drivers/acpi/battery.c
===================================================================
--- linux-pm.orig/drivers/acpi/battery.c
+++ linux-pm/drivers/acpi/battery.c
@@ -8,7 +8,7 @@ 
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define pr_fmt(fmt) "ACPI: battery: " fmt
 
 #include <linux/async.h>
 #include <linux/delay.h>
@@ -29,8 +29,6 @@ 
 
 #include <acpi/battery.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
 #define ACPI_BATTERY_CAPACITY_VALID(capacity) \
 	((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN)
@@ -44,10 +42,6 @@ 
 #define ACPI_BATTERY_STATE_CHARGING	0x2
 #define ACPI_BATTERY_STATE_CRITICAL	0x4
 
-#define _COMPONENT		ACPI_BATTERY_COMPONENT
-
-ACPI_MODULE_NAME("battery");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>");
 MODULE_DESCRIPTION("ACPI Battery Driver");
@@ -466,7 +460,8 @@  static int extract_package(struct acpi_b
 static int acpi_battery_get_status(struct acpi_battery *battery)
 {
 	if (acpi_bus_get_status(battery->device)) {
-		ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
+		acpi_handle_info(battery->device->handle,
+				 "_STA evaluation failed\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -535,8 +530,10 @@  static int acpi_battery_get_info(struct
 		mutex_unlock(&battery->lock);
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s",
-					use_bix ? "_BIX":"_BIF"));
+			acpi_handle_info(battery->device->handle,
+					 "%s evaluation failed: %s\n",
+					 use_bix ?"_BIX":"_BIF",
+				         acpi_format_exception(status));
 		} else {
 			result = extract_battery_info(use_bix,
 						      battery,
@@ -573,7 +570,9 @@  static int acpi_battery_get_state(struct
 	mutex_unlock(&battery->lock);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST"));
+		acpi_handle_info(battery->device->handle,
+				 "_BST evaluation failed: %s",
+				 acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -590,7 +589,7 @@  static int acpi_battery_get_state(struct
 		battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN &&
 		(s16)(battery->rate_now) < 0) {
 		battery->rate_now = abs((s16)battery->rate_now);
-		pr_warn_once(FW_BUG "battery: (dis)charge rate invalid.\n");
+		pr_warn_once(FW_BUG "(dis)charge rate invalid.\n");
 	}
 
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
@@ -625,7 +624,9 @@  static int acpi_battery_set_alarm(struct
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Alarm set to %d\n", battery->alarm));
+	acpi_handle_debug(battery->device->handle, "Alarm set to %d\n",
+			  battery->alarm);
+
 	return 0;
 }
 
@@ -1201,8 +1202,7 @@  static int acpi_battery_add(struct acpi_
 	if (result)
 		goto fail;
 
-	pr_info(PREFIX "%s Slot [%s] (battery %s)\n",
-		ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
+	pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device),
 		device->status.battery_present ? "present" : "absent");
 
 	battery->pm_nb.notifier_call = battery_notify;
@@ -1282,8 +1282,7 @@  static void __init acpi_battery_init_asy
 	if (battery_check_pmic) {
 		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)
 			if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {
-				pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME
-					": found native %s PMIC, not loading\n",
+				pr_info("found native %s PMIC, not loading\n",
 					acpi_battery_blacklist[i]);
 				return;
 			}
Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst
===================================================================
--- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst
+++ linux-pm/Documentation/firmware-guide/acpi/debug.rst
@@ -52,7 +52,6 @@  shows the supported mask values, current
     ACPI_CA_DISASSEMBLER            0x00000800
     ACPI_COMPILER                   0x00001000
     ACPI_TOOLS                      0x00002000
-    ACPI_BATTERY_COMPONENT          0x00040000
     ACPI_BUTTON_COMPONENT           0x00080000
     ACPI_SBS_COMPONENT              0x00100000
     ACPI_FAN_COMPONENT              0x00200000
Index: linux-pm/drivers/acpi/sysfs.c
===================================================================
--- linux-pm.orig/drivers/acpi/sysfs.c
+++ linux-pm/drivers/acpi/sysfs.c
@@ -52,7 +52,6 @@  static const struct acpi_dlayer acpi_deb
 	ACPI_DEBUG_INIT(ACPI_COMPILER),
 	ACPI_DEBUG_INIT(ACPI_TOOLS),
 
-	ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
Index: linux-pm/include/acpi/acpi_drivers.h
===================================================================
--- linux-pm.orig/include/acpi/acpi_drivers.h
+++ linux-pm/include/acpi/acpi_drivers.h
@@ -15,7 +15,6 @@ 
  * Please update drivers/acpi/debug.c and Documentation/firmware-guide/acpi/debug.rst
  * if you add to this list.
  */
-#define ACPI_BATTERY_COMPONENT		0x00040000
 #define ACPI_BUTTON_COMPONENT		0x00080000
 #define ACPI_SBS_COMPONENT		0x00100000
 #define ACPI_FAN_COMPONENT		0x00200000