Message ID | 20210122105101.27374-1-gabriel.fernandez@foss.st.com |
---|---|
Headers | show |
Series | Introduce STM32MP1 RCC in secured mode | expand |
On Fri, 22 Jan 2021 11:51:00 +0100, gabriel.fernandez@foss.st.com wrote: > From: Gabriel Fernandez <gabriel.fernandez@foss.st.com> > > Introduce new compatible string "st,stm32mp1-rcc-secure" for > stm32mp1 clock driver when the device is configured with RCC > security support hardened. > > Signed-off-by: Etienne Carriere <etienne.carriere@st.com> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> > --- > Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.example.dt.yaml: rcc@50000000: compatible:1: 'st,stm32mp1-rcc' was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.example.dt.yaml: rcc@50000000: compatible: ['st,stm32mp1-rcc-secure', 'syscon'] is too short From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml See https://patchwork.ozlabs.org/patch/1430316 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Hi Rob, many thanks i will send a v2. Best regards Gabriel On 1/22/21 3:00 PM, Rob Herring wrote: > On Fri, 22 Jan 2021 11:51:00 +0100, gabriel.fernandez@foss.st.com wrote: >> From: Gabriel Fernandez <gabriel.fernandez@foss.st.com> >> >> Introduce new compatible string "st,stm32mp1-rcc-secure" for >> stm32mp1 clock driver when the device is configured with RCC >> security support hardened. >> >> Signed-off-by: Etienne Carriere <etienne.carriere@st.com> >> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> >> --- >> Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.example.dt.yaml: rcc@50000000: compatible:1: 'st,stm32mp1-rcc' was expected > From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.example.dt.yaml: rcc@50000000: compatible: ['st,stm32mp1-rcc-secure', 'syscon'] is too short > From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml > > See https://patchwork.ozlabs.org/patch/1430316 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. >
From: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Platform STM32MP1 can be used in configuration where some clocks and IP resets can relate as secure resources. These resources are moved from a RCC clock/reset handle to a SCMI clock/reset_domain handle. The RCC clock driver is now dependant of the SCMI driver, then we have to manage now the probe defering. Gabriel Fernandez (14): clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock clk: stm32mp1: remove intermediate pll clocks clk: stm32mp1: convert to module driver clk: stm32mp1: move RCC reset controller into RCC clock driver reset: stm32mp1: remove stm32mp1 reset dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 clk: stm32mp1: new compatible for secure RCC support ARM: dts: stm32: define SCMI resources on stm32mp15 ARM: dts: stm32: move clocks/resets to SCMI resources for stm32mp15 dt-bindings: clock: stm32mp1 new compatible for secure rcc ARM: dts: stm32: introduce basic boot include on stm32mp15x board .../bindings/clock/st,stm32mp1-rcc.yaml | 3 +- arch/arm/boot/dts/stm32mp15-no-scmi.dtsi | 158 ++++++ arch/arm/boot/dts/stm32mp151.dtsi | 127 +++-- arch/arm/boot/dts/stm32mp153.dtsi | 4 +- arch/arm/boot/dts/stm32mp157.dtsi | 2 +- arch/arm/boot/dts/stm32mp15xc.dtsi | 4 +- drivers/clk/Kconfig | 10 + drivers/clk/clk-stm32mp1.c | 495 +++++++++++++++--- drivers/reset/Kconfig | 6 - drivers/reset/Makefile | 1 - drivers/reset/reset-stm32mp1.c | 115 ---- include/dt-bindings/clock/stm32mp1-clks.h | 27 + include/dt-bindings/reset/stm32mp1-resets.h | 15 + 13 files changed, 702 insertions(+), 265 deletions(-) create mode 100644 arch/arm/boot/dts/stm32mp15-no-scmi.dtsi delete mode 100644 drivers/reset/reset-stm32mp1.c