@@ -29,9 +29,9 @@
#define IQS5XX_FW_FILE_LEN 64
#define IQS5XX_NUM_RETRIES 10
-#define IQS5XX_NUM_POINTS 256
#define IQS5XX_NUM_CONTACTS 5
#define IQS5XX_WR_BYTES_MAX 2
+#define IQS5XX_XY_RES_MAX 0xFFFE
#define IQS5XX_PROD_NUM_IQS550 40
#define IQS5XX_PROD_NUM_IQS572 58
@@ -51,10 +51,6 @@
#define IQS5XX_EVENT_MODE 0x01
#define IQS5XX_TP_EVENT 0x04
-#define IQS5XX_FLIP_X 0x01
-#define IQS5XX_FLIP_Y 0x02
-#define IQS5XX_SWITCH_XY_AXIS 0x04
-
#define IQS5XX_PROD_NUM 0x0000
#define IQS5XX_SYS_INFO0 0x000F
#define IQS5XX_SYS_INFO1 0x0010
@@ -62,9 +58,6 @@
#define IQS5XX_SYS_CTRL1 0x0432
#define IQS5XX_SYS_CFG0 0x058E
#define IQS5XX_SYS_CFG1 0x058F
-#define IQS5XX_TOTAL_RX 0x063D
-#define IQS5XX_TOTAL_TX 0x063E
-#define IQS5XX_XY_CFG0 0x0669
#define IQS5XX_X_RES 0x066E
#define IQS5XX_Y_RES 0x0670
#define IQS5XX_EXP_FILE 0x0677
@@ -102,6 +95,7 @@ struct iqs5xx_private {
struct i2c_client *client;
struct input_dev *input;
struct gpio_desc *reset_gpio;
+ struct touchscreen_properties prop;
struct mutex lock;
u16 exp_file;
u8 bl_status;
@@ -498,12 +492,10 @@ static void iqs5xx_close(struct input_dev *input)
static int iqs5xx_axis_init(struct i2c_client *client)
{
struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
- struct touchscreen_properties prop;
+ struct touchscreen_properties *prop = &iqs5xx->prop;
struct input_dev *input;
+ u16 max_x, max_y;
int error;
- u16 max_x, max_x_hw;
- u16 max_y, max_y_hw;
- u8 val;
if (!iqs5xx->input) {
input = devm_input_allocate_device(&client->dev);
@@ -523,89 +515,39 @@ static int iqs5xx_axis_init(struct i2c_client *client)
iqs5xx->input = input;
}
- touchscreen_parse_properties(iqs5xx->input, true, &prop);
-
- error = iqs5xx_read_byte(client, IQS5XX_TOTAL_RX, &val);
- if (error)
- return error;
- max_x_hw = (val - 1) * IQS5XX_NUM_POINTS;
-
- error = iqs5xx_read_byte(client, IQS5XX_TOTAL_TX, &val);
+ error = iqs5xx_read_word(client, IQS5XX_X_RES, &max_x);
if (error)
return error;
- max_y_hw = (val - 1) * IQS5XX_NUM_POINTS;
- error = iqs5xx_read_byte(client, IQS5XX_XY_CFG0, &val);
+ error = iqs5xx_read_word(client, IQS5XX_Y_RES, &max_y);
if (error)
return error;
- if (val & IQS5XX_SWITCH_XY_AXIS)
- swap(max_x_hw, max_y_hw);
-
- if (prop.swap_x_y)
- val ^= IQS5XX_SWITCH_XY_AXIS;
+ input_abs_set_max(iqs5xx->input, ABS_MT_POSITION_X, max_x);
+ input_abs_set_max(iqs5xx->input, ABS_MT_POSITION_Y, max_y);
- if (prop.invert_x)
- val ^= prop.swap_x_y ? IQS5XX_FLIP_Y : IQS5XX_FLIP_X;
+ touchscreen_parse_properties(iqs5xx->input, true, prop);
- if (prop.invert_y)
- val ^= prop.swap_x_y ? IQS5XX_FLIP_X : IQS5XX_FLIP_Y;
-
- error = iqs5xx_write_byte(client, IQS5XX_XY_CFG0, val);
- if (error)
- return error;
-
- if (prop.max_x > max_x_hw) {
+ if (prop->max_x > IQS5XX_XY_RES_MAX) {
dev_err(&client->dev, "Invalid maximum x-coordinate: %u > %u\n",
- prop.max_x, max_x_hw);
+ prop->max_x, IQS5XX_XY_RES_MAX);
return -EINVAL;
- } else if (prop.max_x == 0) {
- error = iqs5xx_read_word(client, IQS5XX_X_RES, &max_x);
+ } else if (prop->max_x != max_x) {
+ error = iqs5xx_write_word(client, IQS5XX_X_RES, prop->max_x);
if (error)
return error;
-
- input_abs_set_max(iqs5xx->input,
- prop.swap_x_y ? ABS_MT_POSITION_Y :
- ABS_MT_POSITION_X,
- max_x);
- } else {
- max_x = (u16)prop.max_x;
}
- if (prop.max_y > max_y_hw) {
+ if (prop->max_y > IQS5XX_XY_RES_MAX) {
dev_err(&client->dev, "Invalid maximum y-coordinate: %u > %u\n",
- prop.max_y, max_y_hw);
+ prop->max_y, IQS5XX_XY_RES_MAX);
return -EINVAL;
- } else if (prop.max_y == 0) {
- error = iqs5xx_read_word(client, IQS5XX_Y_RES, &max_y);
+ } else if (prop->max_y != max_y) {
+ error = iqs5xx_write_word(client, IQS5XX_Y_RES, prop->max_y);
if (error)
return error;
-
- input_abs_set_max(iqs5xx->input,
- prop.swap_x_y ? ABS_MT_POSITION_X :
- ABS_MT_POSITION_Y,
- max_y);
- } else {
- max_y = (u16)prop.max_y;
}
- /*
- * Write horizontal and vertical resolution to the device in case its
- * original defaults were overridden or swapped as per the properties
- * specified in the device tree.
- */
- error = iqs5xx_write_word(client,
- prop.swap_x_y ? IQS5XX_Y_RES : IQS5XX_X_RES,
- max_x);
- if (error)
- return error;
-
- error = iqs5xx_write_word(client,
- prop.swap_x_y ? IQS5XX_X_RES : IQS5XX_Y_RES,
- max_y);
- if (error)
- return error;
-
error = input_mt_init_slots(iqs5xx->input, IQS5XX_NUM_CONTACTS,
INPUT_MT_DIRECT);
if (error)
@@ -765,10 +707,10 @@ static irqreturn_t iqs5xx_irq(int irq, void *data)
input_mt_slot(input, i);
if (input_mt_report_slot_state(input, MT_TOOL_FINGER,
pressure != 0)) {
- input_report_abs(input, ABS_MT_POSITION_X,
- be16_to_cpu(touch_data->abs_x));
- input_report_abs(input, ABS_MT_POSITION_Y,
- be16_to_cpu(touch_data->abs_y));
+ touchscreen_report_pos(iqs5xx->input, &iqs5xx->prop,
+ be16_to_cpu(touch_data->abs_x),
+ be16_to_cpu(touch_data->abs_y),
+ true);
input_report_abs(input, ABS_MT_PRESSURE, pressure);
}
}
The present implementation manipulates axis swap and inversion fields in the device to more or less duplicate what touchscreen_report_pos() does. The resulting logic is convoluted and difficult to follow. Instead report the maximum X and Y coordinates in earnest as they are read from the device, then let touchscreen_parse_properties() fix the axes up as necessary. Finally, use touchscreen_report_pos() to report the transformed coordinates. Last but not least, the maximum X and Y coordinates are not functions of the number of rows/columns that comprise the touch surface. Either coordinate is simply limited to 1 below what is reported for absolute X or Y coordinates when no fingers are present (0xFFFF). Signed-off-by: Jeff LaBundy <jeff@labundy.com> --- drivers/input/touchscreen/iqs5xx.c | 100 ++++++++----------------------------- 1 file changed, 21 insertions(+), 79 deletions(-)