| Message ID | 20210120134357.1522254-15-robert.foss@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,01/22] media: camss: Fix vfe_isr_comp_done() documentation | expand |
Il giorno mer 20 gen 2021 alle ore 14:44 Robert Foss <robert.foss@linaro.org> ha scritto: > > Add bindings for qcom,sdm660-camss in order to support the camera > subsystem on SDM630/660 and SDA variants. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> Hey Robert! > --- > > Changes since v1: > - Laurent: Reworked driver to use dtschema > > > .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++ > 1 file changed, 416 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > new file mode 100644 > index 000000000000..105ce84f9b71 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > @@ -0,0 +1,416 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm CAMSS ISP > + > +maintainers: If you want, feel free to add me to the maintainers list for SDM660 CAMSS - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > + - Robert Foss <robert.foss@linaro.org> > + - Todor Tomov <todor.too@gmail.com> > + > +description: | > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms > + > +properties: > + compatible: > + const: qcom,sdm660-camss > + > + clocks: > + description: > + Input clocks for the hardware block. > + minItems: 42 > + maxItems: 42 > + > + clock-names: > + description: > + Names of input clocks for the hardware block. > + items: > + - const: ahb > + - const: cphy_csid0 > + - const: cphy_csid1 > + - const: cphy_csid2 > + - const: cphy_csid3 > + - const: csi0_ahb > + - const: csi0 > + - const: csi0_phy > + - const: csi0_pix > + - const: csi0_rdi > + - const: csi1_ahb > + - const: csi1 > + - const: csi1_phy > + - const: csi1_pix > + - const: csi1_rdi > + - const: csi2_ahb > + - const: csi2 > + - const: csi2_phy > + - const: csi2_pix > + - const: csi2_rdi > + - const: csi3_ahb > + - const: csi3 > + - const: csi3_phy > + - const: csi3_pix > + - const: csi3_rdi > + - const: csiphy0_timer > + - const: csiphy1_timer > + - const: csiphy2_timer > + - const: csiphy_ahb2crif > + - const: csi_vfe0 > + - const: csi_vfe1 > + - const: ispif_ahb > + - const: throttle_axi > + - const: top_ahb > + - const: vfe0_ahb > + - const: vfe0 > + - const: vfe0_stream > + - const: vfe1_ahb > + - const: vfe1 > + - const: vfe1_stream > + - const: vfe_ahb > + - const: vfe_axi > + > + interrupts: > + description: > + IRQs for the hardware block. > + minItems: 10 > + maxItems: 10 > + > + interrupt-names: > + description: > + Names of IRQs for the hardware block. > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csid3 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: ispif > + - const: vfe0 > + - const: vfe1 > + > + iommus: > + maxItems: 4 > + > + power-domains: > + maxItems: 2 > + > + ports: > + description: > + The CSI data input ports. > + > + type: object > + > + properties: > + port@0: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + port@1: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + port@2: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + port@3: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + reg: > + minItems: 14 > + maxItems: 14 > + > + reg-names: > + items: > + - const: csi_clk_mux > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csid3 > + - const: csiphy0 > + - const: csiphy0_clk_mux > + - const: csiphy1 > + - const: csiphy1_clk_mux > + - const: csiphy2 > + - const: csiphy2_clk_mux > + - const: ispif > + - const: vfe0 > + - const: vfe1 > + > + vdda-supply: > + description: > + Definition of the regulator used as analog power supply. > + > +required: > + - clock-names > + - clocks > + - compatible > + - interrupt-names > + - interrupts > + - iommus > + - power-domains > + - reg > + - reg-names > + - vdda-supply > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,gcc-sdm660.h> > + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> > + > + camss: camss@ca00000 { > + compatible = "qcom,sdm660-camss"; > + > + clocks = <&mmcc CAMSS_AHB_CLK>, > + <&mmcc CAMSS_CPHY_CSID0_CLK>, > + <&mmcc CAMSS_CPHY_CSID1_CLK>, > + <&mmcc CAMSS_CPHY_CSID2_CLK>, > + <&mmcc CAMSS_CPHY_CSID3_CLK>, > + <&mmcc CAMSS_CSI0_AHB_CLK>, > + <&mmcc CAMSS_CSI0_CLK>, > + <&mmcc CAMSS_CPHY_CSID0_CLK>, > + <&mmcc CAMSS_CSI0PIX_CLK>, > + <&mmcc CAMSS_CSI0RDI_CLK>, > + <&mmcc CAMSS_CSI1_AHB_CLK>, > + <&mmcc CAMSS_CSI1_CLK>, > + <&mmcc CAMSS_CPHY_CSID1_CLK>, > + <&mmcc CAMSS_CSI1PIX_CLK>, > + <&mmcc CAMSS_CSI1RDI_CLK>, > + <&mmcc CAMSS_CSI2_AHB_CLK>, > + <&mmcc CAMSS_CSI2_CLK>, > + <&mmcc CAMSS_CPHY_CSID2_CLK>, > + <&mmcc CAMSS_CSI2PIX_CLK>, > + <&mmcc CAMSS_CSI2RDI_CLK>, > + <&mmcc CAMSS_CSI3_AHB_CLK>, > + <&mmcc CAMSS_CSI3_CLK>, > + <&mmcc CAMSS_CPHY_CSID3_CLK>, > + <&mmcc CAMSS_CSI3PIX_CLK>, > + <&mmcc CAMSS_CSI3RDI_CLK>, > + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, > + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, > + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, > + <&mmcc CSIPHY_AHB2CRIF_CLK>, > + <&mmcc CAMSS_CSI_VFE0_CLK>, > + <&mmcc CAMSS_CSI_VFE1_CLK>, > + <&mmcc CAMSS_ISPIF_AHB_CLK>, > + <&mmcc THROTTLE_CAMSS_AXI_CLK>, > + <&mmcc CAMSS_TOP_AHB_CLK>, > + <&mmcc CAMSS_VFE0_AHB_CLK>, > + <&mmcc CAMSS_VFE0_CLK>, > + <&mmcc CAMSS_VFE0_STREAM_CLK>, > + <&mmcc CAMSS_VFE1_AHB_CLK>, > + <&mmcc CAMSS_VFE1_CLK>, > + <&mmcc CAMSS_VFE1_STREAM_CLK>, > + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, > + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; > + > + clock-names = "ahb", > + "cphy_csid0", > + "cphy_csid1", > + "cphy_csid2", > + "cphy_csid3", > + "csi0_ahb", > + "csi0", > + "csi0_phy", > + "csi0_pix", > + "csi0_rdi", > + "csi1_ahb", > + "csi1", > + "csi1_phy", > + "csi1_pix", > + "csi1_rdi", > + "csi2_ahb", > + "csi2", > + "csi2_phy", > + "csi2_pix", > + "csi2_rdi", > + "csi3_ahb", > + "csi3", > + "csi3_phy", > + "csi3_pix", > + "csi3_rdi", > + "csiphy0_timer", > + "csiphy1_timer", > + "csiphy2_timer", > + "csiphy_ahb2crif", > + "csi_vfe0", > + "csi_vfe1", > + "ispif_ahb", > + "throttle_axi", > + "top_ahb", > + "vfe0_ahb", > + "vfe0", > + "vfe0_stream", > + "vfe1_ahb", > + "vfe1", > + "vfe1_stream", > + "vfe_ahb", > + "vfe_axi"; > + > + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; > + > + interrupt-names = "csid0", > + "csid1", > + "csid2", > + "csid3", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "ispif", > + "vfe0", > + "vfe1"; > + > + iommus = <&mmss_smmu 0xc00>, > + <&mmss_smmu 0xc01>, > + <&mmss_smmu 0xc02>, > + <&mmss_smmu 0xc03>; > + > + power-domains = <&mmcc CAMSS_VFE0_GDSC>, > + <&mmcc CAMSS_VFE1_GDSC>; > + > + reg = <0x0ca00020 0x10>, > + <0x0ca30000 0x100>, > + <0x0ca30400 0x100>, > + <0x0ca30800 0x100>, > + <0x0ca30c00 0x100>, > + <0x0c824000 0x1000>, > + <0x0ca00120 0x4>, > + <0x0c825000 0x1000>, > + <0x0ca00124 0x4>, > + <0x0c826000 0x1000>, > + <0x0ca00128 0x4>, > + <0x0ca31000 0x500>, > + <0x0ca10000 0x1000>, > + <0x0ca14000 0x1000>; > + > + reg-names = "csi_clk_mux", > + "csid0", > + "csid1", > + "csid2", > + "csid3", > + "csiphy0", > + "csiphy0_clk_mux", > + "csiphy1", > + "csiphy1_clk_mux", > + "csiphy2", > + "csiphy2_clk_mux", > + "ispif", > + "vfe0", > + "vfe1"; > + > + vdda-supply = <®_2v8>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > -- > 2.27.0 >
Due to the dt-bindings supporting sdm660-camss, this patch depends the sdm660 clock driver being upstreamed. SDM630/660 Multimedia and GPU clock controllers https://lkml.org/lkml/2020/9/26/166 On Wed, 20 Jan 2021 at 14:44, Robert Foss <robert.foss@linaro.org> wrote: > > Add bindings for qcom,sdm660-camss in order to support the camera > subsystem on SDM630/660 and SDA variants. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > > Changes since v1: > - Laurent: Reworked driver to use dtschema > > > .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++ > 1 file changed, 416 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > new file mode 100644 > index 000000000000..105ce84f9b71 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > @@ -0,0 +1,416 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Qualcomm CAMSS ISP > + > +maintainers: > + - Robert Foss <robert.foss@linaro.org> > + - Todor Tomov <todor.too@gmail.com> > + > +description: | > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms > + > +properties: > + compatible: > + const: qcom,sdm660-camss > + > + clocks: > + description: > + Input clocks for the hardware block. > + minItems: 42 > + maxItems: 42 > + > + clock-names: > + description: > + Names of input clocks for the hardware block. > + items: > + - const: ahb > + - const: cphy_csid0 > + - const: cphy_csid1 > + - const: cphy_csid2 > + - const: cphy_csid3 > + - const: csi0_ahb > + - const: csi0 > + - const: csi0_phy > + - const: csi0_pix > + - const: csi0_rdi > + - const: csi1_ahb > + - const: csi1 > + - const: csi1_phy > + - const: csi1_pix > + - const: csi1_rdi > + - const: csi2_ahb > + - const: csi2 > + - const: csi2_phy > + - const: csi2_pix > + - const: csi2_rdi > + - const: csi3_ahb > + - const: csi3 > + - const: csi3_phy > + - const: csi3_pix > + - const: csi3_rdi > + - const: csiphy0_timer > + - const: csiphy1_timer > + - const: csiphy2_timer > + - const: csiphy_ahb2crif > + - const: csi_vfe0 > + - const: csi_vfe1 > + - const: ispif_ahb > + - const: throttle_axi > + - const: top_ahb > + - const: vfe0_ahb > + - const: vfe0 > + - const: vfe0_stream > + - const: vfe1_ahb > + - const: vfe1 > + - const: vfe1_stream > + - const: vfe_ahb > + - const: vfe_axi > + > + interrupts: > + description: > + IRQs for the hardware block. > + minItems: 10 > + maxItems: 10 > + > + interrupt-names: > + description: > + Names of IRQs for the hardware block. > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csid3 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: ispif > + - const: vfe0 > + - const: vfe1 > + > + iommus: > + maxItems: 4 > + > + power-domains: > + maxItems: 2 > + > + ports: > + description: > + The CSI data input ports. > + > + type: object > + > + properties: > + port@0: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + port@1: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + port@2: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + port@3: > + type: object > + description: Input node for receiving CSI data. > + properties: > + endpoint: > + type: object > + > + properties: > + clock-lanes: > + description: |- > + The physical clock lane index. > + > + data-lanes: > + description: |- > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. > + > + required: > + - clock-lanes > + - data-lanes > + > + required: > + - endpoint > + - reg > + > + reg: > + minItems: 14 > + maxItems: 14 > + > + reg-names: > + items: > + - const: csi_clk_mux > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csid3 > + - const: csiphy0 > + - const: csiphy0_clk_mux > + - const: csiphy1 > + - const: csiphy1_clk_mux > + - const: csiphy2 > + - const: csiphy2_clk_mux > + - const: ispif > + - const: vfe0 > + - const: vfe1 > + > + vdda-supply: > + description: > + Definition of the regulator used as analog power supply. > + > +required: > + - clock-names > + - clocks > + - compatible > + - interrupt-names > + - interrupts > + - iommus > + - power-domains > + - reg > + - reg-names > + - vdda-supply > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,gcc-sdm660.h> > + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> > + > + camss: camss@ca00000 { > + compatible = "qcom,sdm660-camss"; > + > + clocks = <&mmcc CAMSS_AHB_CLK>, > + <&mmcc CAMSS_CPHY_CSID0_CLK>, > + <&mmcc CAMSS_CPHY_CSID1_CLK>, > + <&mmcc CAMSS_CPHY_CSID2_CLK>, > + <&mmcc CAMSS_CPHY_CSID3_CLK>, > + <&mmcc CAMSS_CSI0_AHB_CLK>, > + <&mmcc CAMSS_CSI0_CLK>, > + <&mmcc CAMSS_CPHY_CSID0_CLK>, > + <&mmcc CAMSS_CSI0PIX_CLK>, > + <&mmcc CAMSS_CSI0RDI_CLK>, > + <&mmcc CAMSS_CSI1_AHB_CLK>, > + <&mmcc CAMSS_CSI1_CLK>, > + <&mmcc CAMSS_CPHY_CSID1_CLK>, > + <&mmcc CAMSS_CSI1PIX_CLK>, > + <&mmcc CAMSS_CSI1RDI_CLK>, > + <&mmcc CAMSS_CSI2_AHB_CLK>, > + <&mmcc CAMSS_CSI2_CLK>, > + <&mmcc CAMSS_CPHY_CSID2_CLK>, > + <&mmcc CAMSS_CSI2PIX_CLK>, > + <&mmcc CAMSS_CSI2RDI_CLK>, > + <&mmcc CAMSS_CSI3_AHB_CLK>, > + <&mmcc CAMSS_CSI3_CLK>, > + <&mmcc CAMSS_CPHY_CSID3_CLK>, > + <&mmcc CAMSS_CSI3PIX_CLK>, > + <&mmcc CAMSS_CSI3RDI_CLK>, > + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, > + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, > + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, > + <&mmcc CSIPHY_AHB2CRIF_CLK>, > + <&mmcc CAMSS_CSI_VFE0_CLK>, > + <&mmcc CAMSS_CSI_VFE1_CLK>, > + <&mmcc CAMSS_ISPIF_AHB_CLK>, > + <&mmcc THROTTLE_CAMSS_AXI_CLK>, > + <&mmcc CAMSS_TOP_AHB_CLK>, > + <&mmcc CAMSS_VFE0_AHB_CLK>, > + <&mmcc CAMSS_VFE0_CLK>, > + <&mmcc CAMSS_VFE0_STREAM_CLK>, > + <&mmcc CAMSS_VFE1_AHB_CLK>, > + <&mmcc CAMSS_VFE1_CLK>, > + <&mmcc CAMSS_VFE1_STREAM_CLK>, > + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, > + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; > + > + clock-names = "ahb", > + "cphy_csid0", > + "cphy_csid1", > + "cphy_csid2", > + "cphy_csid3", > + "csi0_ahb", > + "csi0", > + "csi0_phy", > + "csi0_pix", > + "csi0_rdi", > + "csi1_ahb", > + "csi1", > + "csi1_phy", > + "csi1_pix", > + "csi1_rdi", > + "csi2_ahb", > + "csi2", > + "csi2_phy", > + "csi2_pix", > + "csi2_rdi", > + "csi3_ahb", > + "csi3", > + "csi3_phy", > + "csi3_pix", > + "csi3_rdi", > + "csiphy0_timer", > + "csiphy1_timer", > + "csiphy2_timer", > + "csiphy_ahb2crif", > + "csi_vfe0", > + "csi_vfe1", > + "ispif_ahb", > + "throttle_axi", > + "top_ahb", > + "vfe0_ahb", > + "vfe0", > + "vfe0_stream", > + "vfe1_ahb", > + "vfe1", > + "vfe1_stream", > + "vfe_ahb", > + "vfe_axi"; > + > + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; > + > + interrupt-names = "csid0", > + "csid1", > + "csid2", > + "csid3", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "ispif", > + "vfe0", > + "vfe1"; > + > + iommus = <&mmss_smmu 0xc00>, > + <&mmss_smmu 0xc01>, > + <&mmss_smmu 0xc02>, > + <&mmss_smmu 0xc03>; > + > + power-domains = <&mmcc CAMSS_VFE0_GDSC>, > + <&mmcc CAMSS_VFE1_GDSC>; > + > + reg = <0x0ca00020 0x10>, > + <0x0ca30000 0x100>, > + <0x0ca30400 0x100>, > + <0x0ca30800 0x100>, > + <0x0ca30c00 0x100>, > + <0x0c824000 0x1000>, > + <0x0ca00120 0x4>, > + <0x0c825000 0x1000>, > + <0x0ca00124 0x4>, > + <0x0c826000 0x1000>, > + <0x0ca00128 0x4>, > + <0x0ca31000 0x500>, > + <0x0ca10000 0x1000>, > + <0x0ca14000 0x1000>; > + > + reg-names = "csi_clk_mux", > + "csid0", > + "csid1", > + "csid2", > + "csid3", > + "csiphy0", > + "csiphy0_clk_mux", > + "csiphy1", > + "csiphy1_clk_mux", > + "csiphy2", > + "csiphy2_clk_mux", > + "ispif", > + "vfe0", > + "vfe1"; > + > + vdda-supply = <®_2v8>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > -- > 2.27.0 >
Hey Angelo, On Wed, 20 Jan 2021 at 17:17, AngeloGioacchino Del Regno <kholk11@gmail.com> wrote: > > Il giorno mer 20 gen 2021 alle ore 14:44 Robert Foss > <robert.foss@linaro.org> ha scritto: > > > > Add bindings for qcom,sdm660-camss in order to support the camera > > subsystem on SDM630/660 and SDA variants. > > > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > > Hey Robert! > > > --- > > > > Changes since v1: > > - Laurent: Reworked driver to use dtschema > > > > > > .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++ > > 1 file changed, 416 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > > new file mode 100644 > > index 000000000000..105ce84f9b71 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > > @@ -0,0 +1,416 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > + > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#" > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Qualcomm CAMSS ISP > > + > > +maintainers: > > If you want, feel free to add me to the maintainers list for SDM660 CAMSS > - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Alright, I'll add you right away :) > > > + - Robert Foss <robert.foss@linaro.org> > > + - Todor Tomov <todor.too@gmail.com> > > + > > +description: | > > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms > > + > > +properties: > > + compatible: > > + const: qcom,sdm660-camss > > + > > + clocks: > > + description: > > + Input clocks for the hardware block. > > + minItems: 42 > > + maxItems: 42 > > + > > + clock-names: > > + description: > > + Names of input clocks for the hardware block. > > + items: > > + - const: ahb > > + - const: cphy_csid0 > > + - const: cphy_csid1 > > + - const: cphy_csid2 > > + - const: cphy_csid3 > > + - const: csi0_ahb > > + - const: csi0 > > + - const: csi0_phy > > + - const: csi0_pix > > + - const: csi0_rdi > > + - const: csi1_ahb > > + - const: csi1 > > + - const: csi1_phy > > + - const: csi1_pix > > + - const: csi1_rdi > > + - const: csi2_ahb > > + - const: csi2 > > + - const: csi2_phy > > + - const: csi2_pix > > + - const: csi2_rdi > > + - const: csi3_ahb > > + - const: csi3 > > + - const: csi3_phy > > + - const: csi3_pix > > + - const: csi3_rdi > > + - const: csiphy0_timer > > + - const: csiphy1_timer > > + - const: csiphy2_timer > > + - const: csiphy_ahb2crif > > + - const: csi_vfe0 > > + - const: csi_vfe1 > > + - const: ispif_ahb > > + - const: throttle_axi > > + - const: top_ahb > > + - const: vfe0_ahb > > + - const: vfe0 > > + - const: vfe0_stream > > + - const: vfe1_ahb > > + - const: vfe1 > > + - const: vfe1_stream > > + - const: vfe_ahb > > + - const: vfe_axi > > + > > + interrupts: > > + description: > > + IRQs for the hardware block. > > + minItems: 10 > > + maxItems: 10 > > + > > + interrupt-names: > > + description: > > + Names of IRQs for the hardware block. > > + items: > > + - const: csid0 > > + - const: csid1 > > + - const: csid2 > > + - const: csid3 > > + - const: csiphy0 > > + - const: csiphy1 > > + - const: csiphy2 > > + - const: ispif > > + - const: vfe0 > > + - const: vfe1 > > + > > + iommus: > > + maxItems: 4 > > + > > + power-domains: > > + maxItems: 2 > > + > > + ports: > > + description: > > + The CSI data input ports. > > + > > + type: object > > + > > + properties: > > + port@0: > > + type: object > > + description: Input node for receiving CSI data. > > + properties: > > + endpoint: > > + type: object > > + > > + properties: > > + clock-lanes: > > + description: |- > > + The physical clock lane index. > > + > > + data-lanes: > > + description: |- > > + An array of physical data lanes indexes. > > + Position of an entry determines the logical > > + lane number, while the value of an entry > > + indicates physical lane index. > > + > > + required: > > + - clock-lanes > > + - data-lanes > > + > > + required: > > + - endpoint > > + - reg > > + > > + port@1: > > + type: object > > + description: Input node for receiving CSI data. > > + properties: > > + endpoint: > > + type: object > > + > > + properties: > > + clock-lanes: > > + description: |- > > + The physical clock lane index. > > + > > + data-lanes: > > + description: |- > > + An array of physical data lanes indexes. > > + Position of an entry determines the logical > > + lane number, while the value of an entry > > + indicates physical lane index. > > + > > + required: > > + - clock-lanes > > + - data-lanes > > + > > + required: > > + - endpoint > > + - reg > > + > > + port@2: > > + type: object > > + description: Input node for receiving CSI data. > > + properties: > > + endpoint: > > + type: object > > + > > + properties: > > + clock-lanes: > > + description: |- > > + The physical clock lane index. > > + > > + data-lanes: > > + description: |- > > + An array of physical data lanes indexes. > > + Position of an entry determines the logical > > + lane number, while the value of an entry > > + indicates physical lane index. > > + > > + required: > > + - clock-lanes > > + - data-lanes > > + > > + required: > > + - endpoint > > + - reg > > + > > + port@3: > > + type: object > > + description: Input node for receiving CSI data. > > + properties: > > + endpoint: > > + type: object > > + > > + properties: > > + clock-lanes: > > + description: |- > > + The physical clock lane index. > > + > > + data-lanes: > > + description: |- > > + An array of physical data lanes indexes. > > + Position of an entry determines the logical > > + lane number, while the value of an entry > > + indicates physical lane index. > > + > > + required: > > + - clock-lanes > > + - data-lanes > > + > > + required: > > + - endpoint > > + - reg > > + > > + reg: > > + minItems: 14 > > + maxItems: 14 > > + > > + reg-names: > > + items: > > + - const: csi_clk_mux > > + - const: csid0 > > + - const: csid1 > > + - const: csid2 > > + - const: csid3 > > + - const: csiphy0 > > + - const: csiphy0_clk_mux > > + - const: csiphy1 > > + - const: csiphy1_clk_mux > > + - const: csiphy2 > > + - const: csiphy2_clk_mux > > + - const: ispif > > + - const: vfe0 > > + - const: vfe1 > > + > > + vdda-supply: > > + description: > > + Definition of the regulator used as analog power supply. > > + > > +required: > > + - clock-names > > + - clocks > > + - compatible > > + - interrupt-names > > + - interrupts > > + - iommus > > + - power-domains > > + - reg > > + - reg-names > > + - vdda-supply > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/clock/qcom,gcc-sdm660.h> > > + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> > > + > > + camss: camss@ca00000 { > > + compatible = "qcom,sdm660-camss"; > > + > > + clocks = <&mmcc CAMSS_AHB_CLK>, > > + <&mmcc CAMSS_CPHY_CSID0_CLK>, > > + <&mmcc CAMSS_CPHY_CSID1_CLK>, > > + <&mmcc CAMSS_CPHY_CSID2_CLK>, > > + <&mmcc CAMSS_CPHY_CSID3_CLK>, > > + <&mmcc CAMSS_CSI0_AHB_CLK>, > > + <&mmcc CAMSS_CSI0_CLK>, > > + <&mmcc CAMSS_CPHY_CSID0_CLK>, > > + <&mmcc CAMSS_CSI0PIX_CLK>, > > + <&mmcc CAMSS_CSI0RDI_CLK>, > > + <&mmcc CAMSS_CSI1_AHB_CLK>, > > + <&mmcc CAMSS_CSI1_CLK>, > > + <&mmcc CAMSS_CPHY_CSID1_CLK>, > > + <&mmcc CAMSS_CSI1PIX_CLK>, > > + <&mmcc CAMSS_CSI1RDI_CLK>, > > + <&mmcc CAMSS_CSI2_AHB_CLK>, > > + <&mmcc CAMSS_CSI2_CLK>, > > + <&mmcc CAMSS_CPHY_CSID2_CLK>, > > + <&mmcc CAMSS_CSI2PIX_CLK>, > > + <&mmcc CAMSS_CSI2RDI_CLK>, > > + <&mmcc CAMSS_CSI3_AHB_CLK>, > > + <&mmcc CAMSS_CSI3_CLK>, > > + <&mmcc CAMSS_CPHY_CSID3_CLK>, > > + <&mmcc CAMSS_CSI3PIX_CLK>, > > + <&mmcc CAMSS_CSI3RDI_CLK>, > > + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, > > + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, > > + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, > > + <&mmcc CSIPHY_AHB2CRIF_CLK>, > > + <&mmcc CAMSS_CSI_VFE0_CLK>, > > + <&mmcc CAMSS_CSI_VFE1_CLK>, > > + <&mmcc CAMSS_ISPIF_AHB_CLK>, > > + <&mmcc THROTTLE_CAMSS_AXI_CLK>, > > + <&mmcc CAMSS_TOP_AHB_CLK>, > > + <&mmcc CAMSS_VFE0_AHB_CLK>, > > + <&mmcc CAMSS_VFE0_CLK>, > > + <&mmcc CAMSS_VFE0_STREAM_CLK>, > > + <&mmcc CAMSS_VFE1_AHB_CLK>, > > + <&mmcc CAMSS_VFE1_CLK>, > > + <&mmcc CAMSS_VFE1_STREAM_CLK>, > > + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, > > + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; > > + > > + clock-names = "ahb", > > + "cphy_csid0", > > + "cphy_csid1", > > + "cphy_csid2", > > + "cphy_csid3", > > + "csi0_ahb", > > + "csi0", > > + "csi0_phy", > > + "csi0_pix", > > + "csi0_rdi", > > + "csi1_ahb", > > + "csi1", > > + "csi1_phy", > > + "csi1_pix", > > + "csi1_rdi", > > + "csi2_ahb", > > + "csi2", > > + "csi2_phy", > > + "csi2_pix", > > + "csi2_rdi", > > + "csi3_ahb", > > + "csi3", > > + "csi3_phy", > > + "csi3_pix", > > + "csi3_rdi", > > + "csiphy0_timer", > > + "csiphy1_timer", > > + "csiphy2_timer", > > + "csiphy_ahb2crif", > > + "csi_vfe0", > > + "csi_vfe1", > > + "ispif_ahb", > > + "throttle_axi", > > + "top_ahb", > > + "vfe0_ahb", > > + "vfe0", > > + "vfe0_stream", > > + "vfe1_ahb", > > + "vfe1", > > + "vfe1_stream", > > + "vfe_ahb", > > + "vfe_axi"; > > + > > + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, > > + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; > > + > > + interrupt-names = "csid0", > > + "csid1", > > + "csid2", > > + "csid3", > > + "csiphy0", > > + "csiphy1", > > + "csiphy2", > > + "ispif", > > + "vfe0", > > + "vfe1"; > > + > > + iommus = <&mmss_smmu 0xc00>, > > + <&mmss_smmu 0xc01>, > > + <&mmss_smmu 0xc02>, > > + <&mmss_smmu 0xc03>; > > + > > + power-domains = <&mmcc CAMSS_VFE0_GDSC>, > > + <&mmcc CAMSS_VFE1_GDSC>; > > + > > + reg = <0x0ca00020 0x10>, > > + <0x0ca30000 0x100>, > > + <0x0ca30400 0x100>, > > + <0x0ca30800 0x100>, > > + <0x0ca30c00 0x100>, > > + <0x0c824000 0x1000>, > > + <0x0ca00120 0x4>, > > + <0x0c825000 0x1000>, > > + <0x0ca00124 0x4>, > > + <0x0c826000 0x1000>, > > + <0x0ca00128 0x4>, > > + <0x0ca31000 0x500>, > > + <0x0ca10000 0x1000>, > > + <0x0ca14000 0x1000>; > > + > > + reg-names = "csi_clk_mux", > > + "csid0", > > + "csid1", > > + "csid2", > > + "csid3", > > + "csiphy0", > > + "csiphy0_clk_mux", > > + "csiphy1", > > + "csiphy1_clk_mux", > > + "csiphy2", > > + "csiphy2_clk_mux", > > + "ispif", > > + "vfe0", > > + "vfe1"; > > + > > + vdda-supply = <®_2v8>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + }; > > + }; > > -- > > 2.27.0 > >
On Wed, 20 Jan 2021 14:43:50 +0100, Robert Foss wrote: > Add bindings for qcom,sdm660-camss in order to support the camera > subsystem on SDM630/660 and SDA variants. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > > Changes since v1: > - Laurent: Reworked driver to use dtschema > > > .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++ > 1 file changed, 416 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,mmcc-sdm660.h: No such file or directory 21 | #include <dt-bindings/clock/qcom,mmcc-sdm660.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [scripts/Makefile.lib:344: Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1370: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1429447 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Wed, Jan 20, 2021 at 02:43:50PM +0100, Robert Foss wrote: > Add bindings for qcom,sdm660-camss in order to support the camera > subsystem on SDM630/660 and SDA variants. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > > Changes since v1: > - Laurent: Reworked driver to use dtschema Same comments on this one.
Thanks Rob! On Fri, 22 Jan 2021 at 17:34, Rob Herring <robh@kernel.org> wrote: > > On Wed, Jan 20, 2021 at 02:43:50PM +0100, Robert Foss wrote: > > Add bindings for qcom,sdm660-camss in order to support the camera > > subsystem on SDM630/660 and SDA variants. > > > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > > --- > > > > Changes since v1: > > - Laurent: Reworked driver to use dtschema > > Same comments on this one. I applied the same feedback to msm8916, msm8996, sdm660 & sdm845 bindings in this series. Thanks!
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml new file mode 100644 index 000000000000..105ce84f9b71 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml @@ -0,0 +1,416 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + - Todor Tomov <todor.too@gmail.com> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sdm660-camss + + clocks: + description: + Input clocks for the hardware block. + minItems: 42 + maxItems: 42 + + clock-names: + description: + Names of input clocks for the hardware block. + items: + - const: ahb + - const: cphy_csid0 + - const: cphy_csid1 + - const: cphy_csid2 + - const: cphy_csid3 + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + - const: csi3_ahb + - const: csi3 + - const: csi3_phy + - const: csi3_pix + - const: csi3_rdi + - const: csiphy0_timer + - const: csiphy1_timer + - const: csiphy2_timer + - const: csiphy_ahb2crif + - const: csi_vfe0 + - const: csi_vfe1 + - const: ispif_ahb + - const: throttle_axi + - const: top_ahb + - const: vfe0_ahb + - const: vfe0 + - const: vfe0_stream + - const: vfe1_ahb + - const: vfe1 + - const: vfe1_stream + - const: vfe_ahb + - const: vfe_axi + + interrupts: + description: + IRQs for the hardware block. + minItems: 10 + maxItems: 10 + + interrupt-names: + description: + Names of IRQs for the hardware block. + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: ispif + - const: vfe0 + - const: vfe1 + + iommus: + maxItems: 4 + + power-domains: + maxItems: 2 + + ports: + description: + The CSI data input ports. + + type: object + + properties: + port@0: + type: object + description: Input node for receiving CSI data. + properties: + endpoint: + type: object + + properties: + clock-lanes: + description: |- + The physical clock lane index. + + data-lanes: + description: |- + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. + + required: + - clock-lanes + - data-lanes + + required: + - endpoint + - reg + + port@1: + type: object + description: Input node for receiving CSI data. + properties: + endpoint: + type: object + + properties: + clock-lanes: + description: |- + The physical clock lane index. + + data-lanes: + description: |- + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. + + required: + - clock-lanes + - data-lanes + + required: + - endpoint + - reg + + port@2: + type: object + description: Input node for receiving CSI data. + properties: + endpoint: + type: object + + properties: + clock-lanes: + description: |- + The physical clock lane index. + + data-lanes: + description: |- + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. + + required: + - clock-lanes + - data-lanes + + required: + - endpoint + - reg + + port@3: + type: object + description: Input node for receiving CSI data. + properties: + endpoint: + type: object + + properties: + clock-lanes: + description: |- + The physical clock lane index. + + data-lanes: + description: |- + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. + + required: + - clock-lanes + - data-lanes + + required: + - endpoint + - reg + + reg: + minItems: 14 + maxItems: 14 + + reg-names: + items: + - const: csi_clk_mux + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid3 + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csiphy2 + - const: csiphy2_clk_mux + - const: ispif + - const: vfe0 + - const: vfe1 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sdm660.h> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h> + + camss: camss@ca00000 { + compatible = "qcom,sdm660-camss"; + + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy1", + "csiphy2", + "ispif", + "vfe0", + "vfe1"; + + iommus = <&mmss_smmu 0xc00>, + <&mmss_smmu 0xc01>, + <&mmss_smmu 0xc02>, + <&mmss_smmu 0xc03>; + + power-domains = <&mmcc CAMSS_VFE0_GDSC>, + <&mmcc CAMSS_VFE1_GDSC>; + + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, + <0x0ca00120 0x4>, + <0x0c825000 0x1000>, + <0x0ca00124 0x4>, + <0x0c826000 0x1000>, + <0x0ca00128 0x4>, + <0x0ca31000 0x500>, + <0x0ca10000 0x1000>, + <0x0ca14000 0x1000>; + + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "ispif", + "vfe0", + "vfe1"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + };
Add bindings for qcom,sdm660-camss in order to support the camera subsystem on SDM630/660 and SDA variants. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v1: - Laurent: Reworked driver to use dtschema .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++ 1 file changed, 416 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml