diff mbox series

RFC: mmc: mmci: Convert bindings to DT schema

Message ID 20210115225313.2616477-1-linus.walleij@linaro.org
State Superseded
Headers show
Series RFC: mmc: mmci: Convert bindings to DT schema | expand

Commit Message

Linus Walleij Jan. 15, 2021, 10:53 p.m. UTC
This converts the MMCI bindings from simple text to a proper
schema.

I can't get this to work when testing the schema and I don't
know why, possibly my fault. That is why it is RFC.

/var/linus/linux-nomadik/build-ux500/Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@5000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /var/linus/linux-nomadik/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
/var/linus/linux-nomadik/build-ux500/Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@80126000: 'bus-width', 'cap-mmc-highspeed', 'cap-sd-highspeed', 'cd-gpios', 'clock-names', 'clocks', 'max-frequency', 'vmmc-supply', 'vqmmc-supply' do not match any of the regexes: 'pinctrl-[0-9]+'

This appear on my machine despite:

allOf:
  - $ref: /schemas/arm/primecell.yaml#
  - $ref: /schemas/mmc/mmc-controller.yaml#

No idea why these refs are not reffed. Help.

Cc: devicetree@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 .../devicetree/bindings/mmc/arm,pl18x.yaml    | 208 ++++++++++++++++++
 .../devicetree/bindings/mmc/mmci.txt          |  74 -------
 2 files changed, 208 insertions(+), 74 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
 delete mode 100644 Documentation/devicetree/bindings/mmc/mmci.txt

-- 
2.29.2

Comments

Marek Vasut Jan. 16, 2021, 5:55 p.m. UTC | #1
On 1/15/21 11:53 PM, Linus Walleij wrote:
> This converts the MMCI bindings from simple text to a proper

> schema.

> 

> I can't get this to work when testing the schema and I don't

> know why, possibly my fault. That is why it is RFC.

> 

> /var/linus/linux-nomadik/build-ux500/Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@5000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'

> 	From schema: /var/linus/linux-nomadik/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

> /var/linus/linux-nomadik/build-ux500/Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@80126000: 'bus-width', 'cap-mmc-highspeed', 'cap-sd-highspeed', 'cd-gpios', 'clock-names', 'clocks', 'max-frequency', 'vmmc-supply', 'vqmmc-supply' do not match any of the regexes: 'pinctrl-[0-9]+'

> 

> This appear on my machine despite:

> 

> allOf:

>    - $ref: /schemas/arm/primecell.yaml#

>    - $ref: /schemas/mmc/mmc-controller.yaml#

> 

> No idea why these refs are not reffed. Help.


[...]

> +  st,use-ckin:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, use CKIN pin from an external

> +      driver to sample the receive data (for example with a voltage switch

> +      transceiver).

> +

> +additionalProperties: false


Set this to "true" and then the validation should work.

[...]
Rob Herring (Arm) Jan. 17, 2021, 3:56 p.m. UTC | #2
On Fri, Jan 15, 2021 at 4:54 PM Linus Walleij <linus.walleij@linaro.org> wrote:
>

> This converts the MMCI bindings from simple text to a proper

> schema.

>

> I can't get this to work when testing the schema and I don't

> know why, possibly my fault. That is why it is RFC.

>

> /var/linus/linux-nomadik/build-ux500/Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@5000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'

>         From schema: /var/linus/linux-nomadik/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

> /var/linus/linux-nomadik/build-ux500/Documentation/devicetree/bindings/mmc/arm,pl18x.example.dt.yaml: mmc@80126000: 'bus-width', 'cap-mmc-highspeed', 'cap-sd-highspeed', 'cd-gpios', 'clock-names', 'clocks', 'max-frequency', 'vmmc-supply', 'vqmmc-supply' do not match any of the regexes: 'pinctrl-[0-9]+'

>

> This appear on my machine despite:

>

> allOf:

>   - $ref: /schemas/arm/primecell.yaml#

>   - $ref: /schemas/mmc/mmc-controller.yaml#

>

> No idea why these refs are not reffed. Help.


They are, but additionalProperties cannot 'see' into a $ref. You need
to use 'unevaluatedProperties: false' instead. Note that
'unevaluatedProperties' is not supported by the underlying jsonschema
package, so it doesn't yet have any effect.

The other way to solve this is listing all the properties from the
above schemas that can be used. I don't think that makes sense in this
case.

You should however, have 'clocks' here because otherwise 1-32 clock
entries is valid.

> Cc: devicetree@vger.kernel.org

> Cc: Marek Vasut <marex@denx.de>

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---

>  .../devicetree/bindings/mmc/arm,pl18x.yaml    | 208 ++++++++++++++++++

>  .../devicetree/bindings/mmc/mmci.txt          |  74 -------

>  2 files changed, 208 insertions(+), 74 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

>  delete mode 100644 Documentation/devicetree/bindings/mmc/mmci.txt

>

> diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

> new file mode 100644

> index 000000000000..2e1157560d7a

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

> @@ -0,0 +1,208 @@

> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181

> +

> +maintainers:

> +  - Linus Walleij <linus.walleij@linaro.org>

> +  - Ulf Hansson <ulf.hansson@linaro.org>

> +

> +description:

> +  The ARM PrimeCells MMCI PL180 and PL181 provides an interface for

> +  reading and writing to MultiMedia and SD cards alike. Over the years

> +  vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO

> +  host controllers with very similar characteristics.

> +

> +allOf:

> +  - $ref: /schemas/arm/primecell.yaml#

> +  - $ref: /schemas/mmc/mmc-controller.yaml#

> +

> +# We need a select here so we don't match all nodes with 'arm,primecell'

> +select:

> +  properties:

> +    compatible:

> +      contains:

> +        enum:

> +          - arm,pl180

> +          - arm,pl181

> +          - arm,pl18x

> +  required:

> +    - compatible

> +

> +properties:

> +  compatible:

> +    oneOf:

> +      - description: The first version of the block, simply called

> +          PL180 and found in the ARM Integrator IM/PD1 logic module.

> +        items:

> +          - const: arm,pl180

> +          - const: arm,primecell

> +      - description: The improved version of the block, found in the

> +          ARM Versatile and later reference designs. Further revisions

> +          exist but get detected at runtime by reading some magic numbers

> +          in the PrimeCell ID registers.

> +        items:

> +          - const: arm,pl181

> +          - const: arm,primecell

> +      - description: Wildcard entry that will let the operating system

> +          inspect the PrimeCell ID registers to determine which hardware

> +          variant of PL180 or PL181 this is.

> +        items:

> +          - const: arm,pl18x

> +          - const: arm,primecell

> +

> +  dmas:

> +    description: Two or zero DMA channels for RX and TX DMA.


That's what the schema says...

> +    items:

> +      - description: RX DMA channel

> +      - description: TX DMA channel

> +

> +  dma-names:

> +    description: One "tx" channel for transmit and one "rx" channel

> +      for receive.


That's what the schema says. Drop.

> +    items:

> +      - const: rx

> +      - const: tx

> +

> +  power-domains: true

> +

> +  resets:

> +    maxItems: 1

> +

> +  reg:

> +    description: the MMIO memory window must be exactly 4KB (0x1000) and the

> +      layout should provide the PrimeCell ID registers so that the device can

> +      be discovered. On ST Micro variants, a second register window may be

> +      defined if a delay block is present and used for tuning.

> +

> +  interrupts:

> +    description: The first interrupt is the command interrupt and corresponds

> +      to the event at the end of a command. The second interrupt is the

> +      PIO (polled I/O) interrupt and occurs when the FIFO needs to be

> +      emptied as part of a bulk read from the card. Some variants have these

> +      two interrupts wired into the same line (logic OR) and in that case

> +      only one interrupt may be provided.


How many interrupts?

> +

> +  st,sig-dir-dat0:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, bus signal direction pins used for

> +      DAT[0].

> +

> +  st,sig-dir-dat2:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, bus signal direction pins used for

> +      DAT[2].

> +

> +  st,sig-dir-dat31:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, bus signal direction pins used for

> +      DAT[3] and DAT[1].

> +

> +  st,sig-dir-dat74:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, bus signal direction pins used for

> +      DAT[7] and DAT[4].

> +

> +  st,sig-dir-cmd:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, CMD signal direction used for

> +      pin CMD.

> +

> +  st,sig-pin-fbclk:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, feedback clock FBCLK signal pin

> +      in use.

> +

> +  st,sig-dir:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, signal direction polarity used for

> +      pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].

> +

> +  st,neg-edge:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, data and command phase relation,

> +      generated on the sd clock falling edge.

> +

> +  st,use-ckin:

> +    $ref: /schemas/types.yaml#/definitions/flag

> +    description: ST Micro-specific property, use CKIN pin from an external

> +      driver to sample the receive data (for example with a voltage switch

> +      transceiver).

> +

> +additionalProperties: false

> +

> +required:

> +  - compatible

> +  - reg

> +  - interrupts

> +

> +examples:

> +  - |

> +    #include <dt-bindings/interrupt-controller/irq.h>

> +    #include <dt-bindings/gpio/gpio.h>

> +

> +    mmc@5000 {

> +      compatible = "arm,pl180", "arm,primecell";

> +      reg = <0x5000 0x1000>;

> +      interrupts-extended = <&vic 22 &sic 1>;

> +      clocks = <&xtal24mhz>, <&pclk>;

> +      clock-names = "mclk", "apb_pclk";

> +    };

> +

> +    mmc@80126000 {

> +      compatible = "arm,pl18x", "arm,primecell";

> +      reg = <0x80126000 0x1000>;

> +      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;

> +      dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;

> +      dma-names = "rx", "tx";

> +      clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;

> +      clock-names = "sdi", "apb_pclk";

> +      max-frequency = <100000000>;

> +      bus-width = <4>;

> +      cap-sd-highspeed;

> +      cap-mmc-highspeed;

> +      cd-gpios  = <&gpio2 31 0x4>;

> +      st,sig-dir-dat0;

> +      st,sig-dir-dat2;

> +      st,sig-dir-cmd;

> +      st,sig-pin-fbclk;

> +      vmmc-supply = <&ab8500_ldo_aux3_reg>;

> +      vqmmc-supply = <&vmmci>;

> +    };

> +

> +    mmc@101f6000 {

> +      compatible = "arm,pl18x", "arm,primecell";

> +      reg = <0x101f6000 0x1000>;

> +      clocks = <&sdiclk>, <&pclksdi>;

> +      clock-names = "mclk", "apb_pclk";

> +      interrupt-parent = <&vica>;

> +      interrupts = <22>;

> +      max-frequency = <400000>;

> +      bus-width = <4>;

> +      cap-mmc-highspeed;

> +      cap-sd-highspeed;

> +      full-pwr-cycle;

> +      st,sig-dir-dat0;

> +      st,sig-dir-dat2;

> +      st,sig-dir-dat31;

> +      st,sig-dir-cmd;

> +      st,sig-pin-fbclk;

> +      vmmc-supply = <&vmmc_regulator>;

> +    };

> +

> +    mmc@52007000 {

> +      compatible = "arm,pl18x", "arm,primecell";

> +      arm,primecell-periphid = <0x10153180>;

> +      reg = <0x52007000 0x1000>;

> +      interrupts = <49>;

> +      interrupt-names = "cmd_irq";

> +      clocks = <&rcc 0>;

> +      clock-names = "apb_pclk";

> +      resets = <&rcc 1>;

> +      cap-sd-highspeed;

> +      cap-mmc-highspeed;

> +      max-frequency = <120000000>;

> +    };

> diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt

> deleted file mode 100644

> index 4ec921e4bf34..000000000000

> --- a/Documentation/devicetree/bindings/mmc/mmci.txt

> +++ /dev/null

> @@ -1,74 +0,0 @@

> -* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1

> -

> -The ARM PrimeCell MMCI PL180 and PL181 provides an interface for

> -reading and writing to MultiMedia and SD cards alike.

> -

> -This file documents differences between the core properties described

> -by mmc.txt and the properties used by the mmci driver. Using "st" as

> -the prefix for a property, indicates support by the ST Micro variant.

> -

> -Required properties:

> -- compatible             : contains "arm,pl18x", "arm,primecell".

> -- vmmc-supply            : phandle to the regulator device tree node, mentioned

> -                           as the VCC/VDD supply in the eMMC/SD specs.

> -

> -Optional properties:

> -- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides

> -                           the ID provided by the HW

> -- resets                 : phandle to internal reset line.

> -                          Should be defined for sdmmc variant.

> -- vqmmc-supply           : phandle to the regulator device tree node, mentioned

> -                           as the VCCQ/VDD_IO supply in the eMMC/SD specs.

> -specific for ux500 variant:

> -- st,sig-dir-dat0        : bus signal direction pin used for DAT[0].

> -- st,sig-dir-dat2        : bus signal direction pin used for DAT[2].

> -- st,sig-dir-dat31       : bus signal direction pin used for DAT[3] and DAT[1].

> -- st,sig-dir-dat74       : bus signal direction pin used for DAT[4] to DAT[7].

> -- st,sig-dir-cmd         : cmd signal direction pin used for CMD.

> -- st,sig-pin-fbclk       : feedback clock signal pin used.

> -

> -specific for sdmmc variant:

> -- reg                   : a second base register may be defined if a delay

> -                           block is present and used for tuning.

> -- st,sig-dir             : signal direction polarity used for cmd, dat0 dat123.

> -- st,neg-edge            : data & command phase relation, generated on

> -                           sd clock falling edge.

> -- st,use-ckin            : use ckin pin from an external driver to sample

> -                           the receive data (example: with voltage

> -                          switch transceiver).

> -

> -Deprecated properties:

> -- mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable.

> -- mmc-cap-sd-highspeed   : indicates whether SD is high speed capable.

> -

> -Example:

> -

> -sdi0_per1@80126000 {

> -       compatible = "arm,pl18x", "arm,primecell";

> -       reg = <0x80126000 0x1000>;

> -       interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;

> -

> -       dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */

> -              <&dma 29 0 0x0>; /* Logical - MemToDev */

> -       dma-names = "rx", "tx";

> -

> -       clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;

> -       clock-names = "sdi", "apb_pclk";

> -

> -       max-frequency = <100000000>;

> -       bus-width = <4>;

> -       cap-sd-highspeed;

> -       cap-mmc-highspeed;

> -       cd-gpios  = <&gpio2 31 0x4>; // 95

> -       st,sig-dir-dat0;

> -       st,sig-dir-dat2;

> -       st,sig-dir-cmd;

> -       st,sig-pin-fbclk;

> -

> -       vmmc-supply = <&ab8500_ldo_aux3_reg>;

> -       vqmmc-supply = <&vmmci>;

> -

> -       pinctrl-names = "default", "sleep";

> -       pinctrl-0 = <&sdi0_default_mode>;

> -       pinctrl-1 = <&sdi0_sleep_mode>;

> -};

> --

> 2.29.2

>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
new file mode 100644
index 000000000000..2e1157560d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -0,0 +1,208 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The ARM PrimeCells MMCI PL180 and PL181 provides an interface for
+  reading and writing to MultiMedia and SD cards alike. Over the years
+  vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO
+  host controllers with very similar characteristics.
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: /schemas/mmc/mmc-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl180
+          - arm,pl181
+          - arm,pl18x
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: The first version of the block, simply called
+          PL180 and found in the ARM Integrator IM/PD1 logic module.
+        items:
+          - const: arm,pl180
+          - const: arm,primecell
+      - description: The improved version of the block, found in the
+          ARM Versatile and later reference designs. Further revisions
+          exist but get detected at runtime by reading some magic numbers
+          in the PrimeCell ID registers.
+        items:
+          - const: arm,pl181
+          - const: arm,primecell
+      - description: Wildcard entry that will let the operating system
+          inspect the PrimeCell ID registers to determine which hardware
+          variant of PL180 or PL181 this is.
+        items:
+          - const: arm,pl18x
+          - const: arm,primecell
+
+  dmas:
+    description: Two or zero DMA channels for RX and TX DMA.
+    items:
+      - description: RX DMA channel
+      - description: TX DMA channel
+
+  dma-names:
+    description: One "tx" channel for transmit and one "rx" channel
+      for receive.
+    items:
+      - const: rx
+      - const: tx
+
+  power-domains: true
+
+  resets:
+    maxItems: 1
+
+  reg:
+    description: the MMIO memory window must be exactly 4KB (0x1000) and the
+      layout should provide the PrimeCell ID registers so that the device can
+      be discovered. On ST Micro variants, a second register window may be
+      defined if a delay block is present and used for tuning.
+
+  interrupts:
+    description: The first interrupt is the command interrupt and corresponds
+      to the event at the end of a command. The second interrupt is the
+      PIO (polled I/O) interrupt and occurs when the FIFO needs to be
+      emptied as part of a bulk read from the card. Some variants have these
+      two interrupts wired into the same line (logic OR) and in that case
+      only one interrupt may be provided.
+
+  st,sig-dir-dat0:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[0].
+
+  st,sig-dir-dat2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[2].
+
+  st,sig-dir-dat31:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[3] and DAT[1].
+
+  st,sig-dir-dat74:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[7] and DAT[4].
+
+  st,sig-dir-cmd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, CMD signal direction used for
+      pin CMD.
+
+  st,sig-pin-fbclk:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, feedback clock FBCLK signal pin
+      in use.
+
+  st,sig-dir:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, signal direction polarity used for
+      pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].
+
+  st,neg-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, data and command phase relation,
+      generated on the sd clock falling edge.
+
+  st,use-ckin:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, use CKIN pin from an external
+      driver to sample the receive data (for example with a voltage switch
+      transceiver).
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mmc@5000 {
+      compatible = "arm,pl180", "arm,primecell";
+      reg = <0x5000 0x1000>;
+      interrupts-extended = <&vic 22 &sic 1>;
+      clocks = <&xtal24mhz>, <&pclk>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+    mmc@80126000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80126000 0x1000>;
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;
+      dma-names = "rx", "tx";
+      clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+      clock-names = "sdi", "apb_pclk";
+      max-frequency = <100000000>;
+      bus-width = <4>;
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cd-gpios  = <&gpio2 31 0x4>;
+      st,sig-dir-dat0;
+      st,sig-dir-dat2;
+      st,sig-dir-cmd;
+      st,sig-pin-fbclk;
+      vmmc-supply = <&ab8500_ldo_aux3_reg>;
+      vqmmc-supply = <&vmmci>;
+    };
+
+    mmc@101f6000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x101f6000 0x1000>;
+      clocks = <&sdiclk>, <&pclksdi>;
+      clock-names = "mclk", "apb_pclk";
+      interrupt-parent = <&vica>;
+      interrupts = <22>;
+      max-frequency = <400000>;
+      bus-width = <4>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+      full-pwr-cycle;
+      st,sig-dir-dat0;
+      st,sig-dir-dat2;
+      st,sig-dir-dat31;
+      st,sig-dir-cmd;
+      st,sig-pin-fbclk;
+      vmmc-supply = <&vmmc_regulator>;
+    };
+
+    mmc@52007000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      arm,primecell-periphid = <0x10153180>;
+      reg = <0x52007000 0x1000>;
+      interrupts = <49>;
+      interrupt-names = "cmd_irq";
+      clocks = <&rcc 0>;
+      clock-names = "apb_pclk";
+      resets = <&rcc 1>;
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      max-frequency = <120000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
deleted file mode 100644
index 4ec921e4bf34..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ /dev/null
@@ -1,74 +0,0 @@ 
-* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1
-
-The ARM PrimeCell MMCI PL180 and PL181 provides an interface for
-reading and writing to MultiMedia and SD cards alike.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmci driver. Using "st" as
-the prefix for a property, indicates support by the ST Micro variant.
-
-Required properties:
-- compatible             : contains "arm,pl18x", "arm,primecell".
-- vmmc-supply            : phandle to the regulator device tree node, mentioned
-                           as the VCC/VDD supply in the eMMC/SD specs.
-
-Optional properties:
-- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
-                           the ID provided by the HW
-- resets                 : phandle to internal reset line.
-			   Should be defined for sdmmc variant.
-- vqmmc-supply           : phandle to the regulator device tree node, mentioned
-                           as the VCCQ/VDD_IO supply in the eMMC/SD specs.
-specific for ux500 variant:
-- st,sig-dir-dat0        : bus signal direction pin used for DAT[0].
-- st,sig-dir-dat2        : bus signal direction pin used for DAT[2].
-- st,sig-dir-dat31       : bus signal direction pin used for DAT[3] and DAT[1].
-- st,sig-dir-dat74       : bus signal direction pin used for DAT[4] to DAT[7].
-- st,sig-dir-cmd         : cmd signal direction pin used for CMD.
-- st,sig-pin-fbclk       : feedback clock signal pin used.
-
-specific for sdmmc variant:
-- reg			 : a second base register may be defined if a delay
-                           block is present and used for tuning.
-- st,sig-dir             : signal direction polarity used for cmd, dat0 dat123.
-- st,neg-edge            : data & command phase relation, generated on
-                           sd clock falling edge.
-- st,use-ckin            : use ckin pin from an external driver to sample
-                           the receive data (example: with voltage
-			   switch transceiver).
-
-Deprecated properties:
-- mmc-cap-mmc-highspeed  : indicates whether MMC is high speed capable.
-- mmc-cap-sd-highspeed   : indicates whether SD is high speed capable.
-
-Example:
-
-sdi0_per1@80126000 {
-	compatible = "arm,pl18x", "arm,primecell";
-	reg = <0x80126000 0x1000>;
-	interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
-
-	dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
-	       <&dma 29 0 0x0>; /* Logical - MemToDev */
-	dma-names = "rx", "tx";
-
-	clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
-	clock-names = "sdi", "apb_pclk";
-
-	max-frequency = <100000000>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-	cd-gpios  = <&gpio2 31 0x4>; // 95
-	st,sig-dir-dat0;
-	st,sig-dir-dat2;
-	st,sig-dir-cmd;
-	st,sig-pin-fbclk;
-
-	vmmc-supply = <&ab8500_ldo_aux3_reg>;
-	vqmmc-supply = <&vmmci>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdi0_default_mode>;
-	pinctrl-1 = <&sdi0_sleep_mode>;
-};