| Message ID | 20210111225121.820014-3-ben.widawsky@intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | CXL 2.0 Support | expand |
On 1/11/21 2:51 PM, Ben Widawsky wrote: > diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig > new file mode 100644 > index 000000000000..68da926ba5b1 > --- /dev/null > +++ b/drivers/cxl/Kconfig > @@ -0,0 +1,36 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +menuconfig CXL_BUS > + tristate "CXL (Compute Express Link) Devices Support" > + help > + CXL is a bus that is electrically compatible with PCI-E, but layers > + three protocols on that signalling (CXL.io, CXL.cache, and CXL.mem). > + The CXL.cache protocol allows devices to hold cachelines locally, the > + CXL.mem protocol allows devices to be fully coherent memory targets, > + the CXL.io protocol is equivalent to PCI-E. Say 'y' to enable support > + for the configuration and management of devices supporting these > + protocols. > + > +if CXL_BUS > + > +config CXL_BUS_PROVIDER > + tristate > + > +config CXL_ACPI > + tristate "CXL ACPI: Platform Support" > + depends on ACPI > + default CXL_BUS > + select CXL_BUS_PROVIDER > + help > + Say 'y/m' to enable a driver (named "cxl_acpi.ko" when built > + as a module) that will enable support for CXL.mem endpoint > + devices. In general, CXL Platform Support is a prerequisite > + for any CXL device driver that wants to claim ownership of a > + component register space. By default platform firmware assumes > + Linux is unaware of CXL capabilities and requires explicit > + opt-in. This platform component also mediates resources > + described by the CEDT (CXL Early Discovery Table). See > + Chapter 9.14.1 CXL Early Discovery Table (CEDT) in the CXL 2.0 > + specification. > + > + If unsure say 'm' End above sentence with a '.', please. > +endif
On Tue, Jan 12, 2021 at 1:29 AM Ben Widawsky <ben.widawsky@intel.com> wrote: > > From: Vishal Verma <vishal.l.verma@intel.com> > > Add an acpi_cxl module to coordinate the ACPI portions of the CXL > (Compute eXpress Link) interconnect. This driver binds to ACPI0017 > objects in the ACPI tree, and coordinates access to the resources > provided by the ACPI CEDT (CXL Early Discovery Table). > > It also coordinates operations of the root port _OSC object to notify > platform firmware that the OS has native support for the CXL > capabilities of endpoints. This doesn't happen here, but in the next patch. > Note: the actbl1.h changes are speculative. The expectation is that they > will arrive through the ACPICA tree in due time. So why don't you put them into a separate patch and drop it from the series when not necessary any more? > Cc: Ben Widawsky <ben.widawsky@intel.com> > Cc: Dan Williams <dan.j.williams@intel.com> > Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> > --- > drivers/Kconfig | 1 + > drivers/Makefile | 1 + > drivers/cxl/Kconfig | 36 ++++++++++++++++ > drivers/cxl/Makefile | 5 +++ > drivers/cxl/acpi.c | 97 +++++++++++++++++++++++++++++++++++++++++++ > drivers/cxl/acpi.h | 15 +++++++ > include/acpi/actbl1.h | 50 ++++++++++++++++++++++ > 7 files changed, 205 insertions(+) > create mode 100644 drivers/cxl/Kconfig > create mode 100644 drivers/cxl/Makefile > create mode 100644 drivers/cxl/acpi.c > create mode 100644 drivers/cxl/acpi.h > > diff --git a/drivers/Kconfig b/drivers/Kconfig > index dcecc9f6e33f..62c753a73651 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -6,6 +6,7 @@ menu "Device Drivers" > source "drivers/amba/Kconfig" > source "drivers/eisa/Kconfig" > source "drivers/pci/Kconfig" > +source "drivers/cxl/Kconfig" > source "drivers/pcmcia/Kconfig" > source "drivers/rapidio/Kconfig" > > diff --git a/drivers/Makefile b/drivers/Makefile > index fd11b9ac4cc3..678ea810410f 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -73,6 +73,7 @@ obj-$(CONFIG_NVM) += lightnvm/ > obj-y += base/ block/ misc/ mfd/ nfc/ > obj-$(CONFIG_LIBNVDIMM) += nvdimm/ > obj-$(CONFIG_DAX) += dax/ > +obj-$(CONFIG_CXL_BUS) += cxl/ > obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/ > obj-$(CONFIG_NUBUS) += nubus/ > obj-y += macintosh/ > diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig > new file mode 100644 > index 000000000000..68da926ba5b1 > --- /dev/null > +++ b/drivers/cxl/Kconfig > @@ -0,0 +1,36 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +menuconfig CXL_BUS > + tristate "CXL (Compute Express Link) Devices Support" > + help > + CXL is a bus that is electrically compatible with PCI-E, but layers > + three protocols on that signalling (CXL.io, CXL.cache, and CXL.mem). > + The CXL.cache protocol allows devices to hold cachelines locally, the > + CXL.mem protocol allows devices to be fully coherent memory targets, > + the CXL.io protocol is equivalent to PCI-E. Say 'y' to enable support > + for the configuration and management of devices supporting these > + protocols. > + > +if CXL_BUS > + > +config CXL_BUS_PROVIDER > + tristate > + > +config CXL_ACPI > + tristate "CXL ACPI: Platform Support" > + depends on ACPI > + default CXL_BUS > + select CXL_BUS_PROVIDER > + help > + Say 'y/m' to enable a driver (named "cxl_acpi.ko" when built > + as a module) that will enable support for CXL.mem endpoint > + devices. In general, CXL Platform Support is a prerequisite > + for any CXL device driver that wants to claim ownership of a > + component register space. By default platform firmware assumes > + Linux is unaware of CXL capabilities and requires explicit > + opt-in. This platform component also mediates resources > + described by the CEDT (CXL Early Discovery Table). See > + Chapter 9.14.1 CXL Early Discovery Table (CEDT) in the CXL 2.0 > + specification. > + > + If unsure say 'm' Missing full stop. > +endif > diff --git a/drivers/cxl/Makefile b/drivers/cxl/Makefile > new file mode 100644 > index 000000000000..d38cd34a2582 > --- /dev/null > +++ b/drivers/cxl/Makefile > @@ -0,0 +1,5 @@ > +# SPDX-License-Identifier: GPL-2.0 > +obj-$(CONFIG_CXL_ACPI) += cxl_acpi.o > + > +ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CXL > +cxl_acpi-y := acpi.o > diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c > new file mode 100644 > index 000000000000..0f1ba9b3f1ed > --- /dev/null > +++ b/drivers/cxl/acpi.c > @@ -0,0 +1,97 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* Copyright(c) 2020 Intel Corporation. All rights reserved. */ > +#include <linux/platform_device.h> > +#include <linux/list_sort.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/sysfs.h> > +#include <linux/list.h> > +#include <linux/acpi.h> > +#include <linux/sort.h> > +#include <linux/pci.h> > +#include "acpi.h" > + > +/* > + * If/when CXL support is defined by other platform firmware the kernel > + * will need a mechanism to select between the platform specific version > + * of this routine, until then, hard-code ACPI assumptions > + */ > +int cxl_bus_acquire(struct pci_dev *pdev) > +{ > + struct acpi_device *adev; > + struct pci_dev *root_port; > + struct device *root; > + > + root_port = pcie_find_root_port(pdev); > + if (!root_port) > + return -ENXIO; > + > + root = root_port->dev.parent; > + if (!root) > + return -ENXIO; > + > + adev = ACPI_COMPANION(root); > + if (!adev) > + return -ENXIO; > + > + /* TODO: OSC enabling */ > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(cxl_bus_acquire); I would move the addition of cxl_bus_acquire() entirely to the next patch, it looks quite confusing to me as is. > + > +static void acpi_cedt_put_table(void *table) > +{ > + acpi_put_table(table); > +} > + > +static int cxl_acpi_probe(struct platform_device *pdev) > +{ > + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); > + struct cxl_acpi_desc *acpi_desc; > + struct device *dev = &adev->dev; > + struct acpi_table_header *tbl; > + acpi_status status; > + acpi_size sz; > + int rc; > + > + status = acpi_get_table(ACPI_SIG_CEDT, 0, &tbl); > + if (ACPI_FAILURE(status)) { > + dev_err(dev, "failed to find CEDT at startup\n"); > + return 0; > + } > + > + rc = devm_add_action_or_reset(dev, acpi_cedt_put_table, tbl); > + if (rc) > + return rc; > + > + sz = tbl->length; > + dev_info(dev, "found CEDT at startup: %lld bytes\n", sz); > + > + acpi_desc = devm_kzalloc(dev, sizeof(*acpi_desc), GFP_KERNEL); > + if (!acpi_desc) > + return -ENOMEM; > + > + dev_set_drvdata(&adev->dev, acpi_desc); > + acpi_desc->dev = &adev->dev; > + acpi_desc->acpi_header = *tbl; > + > + return 0; > +} > + > +static const struct acpi_device_id cxl_acpi_ids[] = { > + { "ACPI0017", 0 }, > + { "", 0 }, > +}; > +MODULE_DEVICE_TABLE(acpi, cxl_acpi_ids); > + > +static struct platform_driver cxl_acpi_driver = { > + .probe = cxl_acpi_probe, > + .driver = { > + .name = KBUILD_MODNAME, > + .acpi_match_table = cxl_acpi_ids, > + }, > +}; > + > +module_platform_driver(cxl_acpi_driver); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/cxl/acpi.h b/drivers/cxl/acpi.h > new file mode 100644 > index 000000000000..d638f8886ab7 > --- /dev/null > +++ b/drivers/cxl/acpi.h > @@ -0,0 +1,15 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* Copyright(c) 2020 Intel Corporation. All rights reserved. */ > + > +#ifndef __CXL_ACPI_H__ > +#define __CXL_ACPI_H__ > +#include <linux/acpi.h> > + > +struct cxl_acpi_desc { > + struct acpi_table_header acpi_header; > + struct device *dev; > +}; > + > +int cxl_bus_acquire(struct pci_dev *pci_dev); And so this should go to the next patch too IMV. > + > +#endif /* __CXL_ACPI_H__ */ > diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h > index 43549547ed3e..f3a0303984c8 100644 > --- a/include/acpi/actbl1.h > +++ b/include/acpi/actbl1.h > @@ -28,6 +28,7 @@ > #define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */ > #define ACPI_SIG_BGRT "BGRT" /* Boot Graphics Resource Table */ > #define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */ > +#define ACPI_SIG_CEDT "CEDT" /* CXL Early Discovery Table */ > #define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */ > #define ACPI_SIG_CSRT "CSRT" /* Core System Resource Table */ > #define ACPI_SIG_DBG2 "DBG2" /* Debug Port table type 2 */ > @@ -1624,6 +1625,55 @@ struct acpi_ibft_target { > u16 reverse_chap_secret_offset; > }; > > +/******************************************************************************* > + * > + * CEDT - CXL Early Discovery Table (ACPI 6.4) > + * Version 1 > + * > + ******************************************************************************/ > + > +struct acpi_table_cedt { > + struct acpi_table_header header; /* Common ACPI table header */ > + u32 reserved; > +}; > + > +/* Values for CEDT structure types */ > + > +enum acpi_cedt_type { > + ACPI_CEDT_TYPE_HOST_BRIDGE = 0, /* CHBS - CXL Host Bridge Structure */ > +}; > + > +struct acpi_cedt_structure { > + u8 type; > + u8 reserved; > + u16 length; > +}; > + > +/* > + * CEDT Structures, correspond to Type in struct acpi_cedt_structure > + */ > + > +/* 0: CXL Host Bridge Structure */ > + > +struct acpi_cedt_chbs { > + struct acpi_cedt_structure header; > + u32 uid; > + u32 version; > + u32 reserved1; > + u64 base; > + u64 length; > +}; > + > +/* Values for version field above */ > + > +#define ACPI_CEDT_CHBS_VERSION_CXL11 (0) > +#define ACPI_CEDT_CHBS_VERSION_CXL20 (1) > + > +/* Values for length field above */ > + > +#define ACPI_CEDT_CHBS_LENGTH_CXL11 (0x2000) > +#define ACPI_CEDT_CHBS_LENGTH_CXL20 (0x10000) > + > /* Reset to default packing */ > > #pragma pack() > -- > 2.30.0 >
On Wed, 2021-01-13 at 13:40 +0100, Rafael J. Wysocki wrote: > On Tue, Jan 12, 2021 at 1:29 AM Ben Widawsky <ben.widawsky@intel.com> wrote: > > > > From: Vishal Verma <vishal.l.verma@intel.com> > > > > Add an acpi_cxl module to coordinate the ACPI portions of the CXL > > (Compute eXpress Link) interconnect. This driver binds to ACPI0017 > > objects in the ACPI tree, and coordinates access to the resources > > provided by the ACPI CEDT (CXL Early Discovery Table). > > > > It also coordinates operations of the root port _OSC object to notify > > platform firmware that the OS has native support for the CXL > > capabilities of endpoints. > > This doesn't happen here, but in the next patch. > > > Note: the actbl1.h changes are speculative. The expectation is that they > > will arrive through the ACPICA tree in due time. > > So why don't you put them into a separate patch and drop it from the > series when not necessary any more? [snip] > > +/* > > + * If/when CXL support is defined by other platform firmware the kernel > > + * will need a mechanism to select between the platform specific version > > + * of this routine, until then, hard-code ACPI assumptions > > + */ > > +int cxl_bus_acquire(struct pci_dev *pdev) > > +{ > > + struct acpi_device *adev; > > + struct pci_dev *root_port; > > + struct device *root; > > + > > + root_port = pcie_find_root_port(pdev); > > + if (!root_port) > > + return -ENXIO; > > + > > + root = root_port->dev.parent; > > + if (!root) > > + return -ENXIO; > > + > > + adev = ACPI_COMPANION(root); > > + if (!adev) > > + return -ENXIO; > > + > > + /* TODO: OSC enabling */ > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(cxl_bus_acquire); > > I would move the addition of cxl_bus_acquire() entirely to the next > patch, it looks quite confusing to me as is. Makes sense - and also agreed with all of your other comments. I've cleaned this up for the next revision. Thanks Rafael! >
diff --git a/drivers/Kconfig b/drivers/Kconfig index dcecc9f6e33f..62c753a73651 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -6,6 +6,7 @@ menu "Device Drivers" source "drivers/amba/Kconfig" source "drivers/eisa/Kconfig" source "drivers/pci/Kconfig" +source "drivers/cxl/Kconfig" source "drivers/pcmcia/Kconfig" source "drivers/rapidio/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index fd11b9ac4cc3..678ea810410f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_NVM) += lightnvm/ obj-y += base/ block/ misc/ mfd/ nfc/ obj-$(CONFIG_LIBNVDIMM) += nvdimm/ obj-$(CONFIG_DAX) += dax/ +obj-$(CONFIG_CXL_BUS) += cxl/ obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/ obj-$(CONFIG_NUBUS) += nubus/ obj-y += macintosh/ diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig new file mode 100644 index 000000000000..68da926ba5b1 --- /dev/null +++ b/drivers/cxl/Kconfig @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig CXL_BUS + tristate "CXL (Compute Express Link) Devices Support" + help + CXL is a bus that is electrically compatible with PCI-E, but layers + three protocols on that signalling (CXL.io, CXL.cache, and CXL.mem). + The CXL.cache protocol allows devices to hold cachelines locally, the + CXL.mem protocol allows devices to be fully coherent memory targets, + the CXL.io protocol is equivalent to PCI-E. Say 'y' to enable support + for the configuration and management of devices supporting these + protocols. + +if CXL_BUS + +config CXL_BUS_PROVIDER + tristate + +config CXL_ACPI + tristate "CXL ACPI: Platform Support" + depends on ACPI + default CXL_BUS + select CXL_BUS_PROVIDER + help + Say 'y/m' to enable a driver (named "cxl_acpi.ko" when built + as a module) that will enable support for CXL.mem endpoint + devices. In general, CXL Platform Support is a prerequisite + for any CXL device driver that wants to claim ownership of a + component register space. By default platform firmware assumes + Linux is unaware of CXL capabilities and requires explicit + opt-in. This platform component also mediates resources + described by the CEDT (CXL Early Discovery Table). See + Chapter 9.14.1 CXL Early Discovery Table (CEDT) in the CXL 2.0 + specification. + + If unsure say 'm' +endif diff --git a/drivers/cxl/Makefile b/drivers/cxl/Makefile new file mode 100644 index 000000000000..d38cd34a2582 --- /dev/null +++ b/drivers/cxl/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_CXL_ACPI) += cxl_acpi.o + +ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CXL +cxl_acpi-y := acpi.o diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c new file mode 100644 index 000000000000..0f1ba9b3f1ed --- /dev/null +++ b/drivers/cxl/acpi.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright(c) 2020 Intel Corporation. All rights reserved. */ +#include <linux/platform_device.h> +#include <linux/list_sort.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> +#include <linux/list.h> +#include <linux/acpi.h> +#include <linux/sort.h> +#include <linux/pci.h> +#include "acpi.h" + +/* + * If/when CXL support is defined by other platform firmware the kernel + * will need a mechanism to select between the platform specific version + * of this routine, until then, hard-code ACPI assumptions + */ +int cxl_bus_acquire(struct pci_dev *pdev) +{ + struct acpi_device *adev; + struct pci_dev *root_port; + struct device *root; + + root_port = pcie_find_root_port(pdev); + if (!root_port) + return -ENXIO; + + root = root_port->dev.parent; + if (!root) + return -ENXIO; + + adev = ACPI_COMPANION(root); + if (!adev) + return -ENXIO; + + /* TODO: OSC enabling */ + + return 0; +} +EXPORT_SYMBOL_GPL(cxl_bus_acquire); + +static void acpi_cedt_put_table(void *table) +{ + acpi_put_table(table); +} + +static int cxl_acpi_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct cxl_acpi_desc *acpi_desc; + struct device *dev = &adev->dev; + struct acpi_table_header *tbl; + acpi_status status; + acpi_size sz; + int rc; + + status = acpi_get_table(ACPI_SIG_CEDT, 0, &tbl); + if (ACPI_FAILURE(status)) { + dev_err(dev, "failed to find CEDT at startup\n"); + return 0; + } + + rc = devm_add_action_or_reset(dev, acpi_cedt_put_table, tbl); + if (rc) + return rc; + + sz = tbl->length; + dev_info(dev, "found CEDT at startup: %lld bytes\n", sz); + + acpi_desc = devm_kzalloc(dev, sizeof(*acpi_desc), GFP_KERNEL); + if (!acpi_desc) + return -ENOMEM; + + dev_set_drvdata(&adev->dev, acpi_desc); + acpi_desc->dev = &adev->dev; + acpi_desc->acpi_header = *tbl; + + return 0; +} + +static const struct acpi_device_id cxl_acpi_ids[] = { + { "ACPI0017", 0 }, + { "", 0 }, +}; +MODULE_DEVICE_TABLE(acpi, cxl_acpi_ids); + +static struct platform_driver cxl_acpi_driver = { + .probe = cxl_acpi_probe, + .driver = { + .name = KBUILD_MODNAME, + .acpi_match_table = cxl_acpi_ids, + }, +}; + +module_platform_driver(cxl_acpi_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cxl/acpi.h b/drivers/cxl/acpi.h new file mode 100644 index 000000000000..d638f8886ab7 --- /dev/null +++ b/drivers/cxl/acpi.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright(c) 2020 Intel Corporation. All rights reserved. */ + +#ifndef __CXL_ACPI_H__ +#define __CXL_ACPI_H__ +#include <linux/acpi.h> + +struct cxl_acpi_desc { + struct acpi_table_header acpi_header; + struct device *dev; +}; + +int cxl_bus_acquire(struct pci_dev *pci_dev); + +#endif /* __CXL_ACPI_H__ */ diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 43549547ed3e..f3a0303984c8 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -28,6 +28,7 @@ #define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */ #define ACPI_SIG_BGRT "BGRT" /* Boot Graphics Resource Table */ #define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */ +#define ACPI_SIG_CEDT "CEDT" /* CXL Early Discovery Table */ #define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */ #define ACPI_SIG_CSRT "CSRT" /* Core System Resource Table */ #define ACPI_SIG_DBG2 "DBG2" /* Debug Port table type 2 */ @@ -1624,6 +1625,55 @@ struct acpi_ibft_target { u16 reverse_chap_secret_offset; }; +/******************************************************************************* + * + * CEDT - CXL Early Discovery Table (ACPI 6.4) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_cedt { + struct acpi_table_header header; /* Common ACPI table header */ + u32 reserved; +}; + +/* Values for CEDT structure types */ + +enum acpi_cedt_type { + ACPI_CEDT_TYPE_HOST_BRIDGE = 0, /* CHBS - CXL Host Bridge Structure */ +}; + +struct acpi_cedt_structure { + u8 type; + u8 reserved; + u16 length; +}; + +/* + * CEDT Structures, correspond to Type in struct acpi_cedt_structure + */ + +/* 0: CXL Host Bridge Structure */ + +struct acpi_cedt_chbs { + struct acpi_cedt_structure header; + u32 uid; + u32 version; + u32 reserved1; + u64 base; + u64 length; +}; + +/* Values for version field above */ + +#define ACPI_CEDT_CHBS_VERSION_CXL11 (0) +#define ACPI_CEDT_CHBS_VERSION_CXL20 (1) + +/* Values for length field above */ + +#define ACPI_CEDT_CHBS_LENGTH_CXL11 (0x2000) +#define ACPI_CEDT_CHBS_LENGTH_CXL20 (0x10000) + /* Reset to default packing */ #pragma pack()